Viewing file:  istallion.h (3.85 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*****************************************************************************/
/*
* istallion.h -- stallion intelligent multiport serial driver.
*
* Copyright (C) 1996-1998 Stallion Technologies (support@stallion.oz.au).
* Copyright (C) 1994-1996 Greg Ungerer.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*/
/*****************************************************************************/
#ifndef _ISTALLION_H
#define _ISTALLION_H
/*****************************************************************************/
/*
* Define important driver constants here.
*/
#define STL_MAXBRDS 4
#define STL_MAXPANELS 4
#define STL_MAXPORTS 64
#define STL_MAXCHANS (STL_MAXPORTS + 1)
#define STL_MAXDEVS (STL_MAXBRDS * STL_MAXPORTS)
/*
* Define a set of structures to hold all the board/panel/port info
* for our ports. These will be dynamically allocated as required at
* driver initialization time.
*/
/*
* Port and board structures to hold status info about each object.
* The board structure contains pointers to structures for each port
* connected to it. Panels are not distinguished here, since
* communication with the slave board will always be on a per port
* basis.
*/
typedef struct {
unsigned long magic;
int portnr;
int panelnr;
int brdnr;
unsigned long state;
int devnr;
int flags;
int baud_base;
int custom_divisor;
int close_delay;
int closing_wait;
int refcount;
int openwaitcnt;
int rc;
int argsize;
void *argp;
long session;
long pgrp;
unsigned int rxmarkmsk;
struct tty_struct *tty;
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0))
struct wait_queue *open_wait;
struct wait_queue *close_wait;
struct wait_queue *raw_wait;
#else
wait_queue_head_t open_wait;
wait_queue_head_t close_wait;
wait_queue_head_t raw_wait;
#endif
struct tq_struct tqhangup;
struct termios normaltermios;
struct termios callouttermios;
asysigs_t asig;
unsigned long addr;
unsigned long rxoffset;
unsigned long txoffset;
unsigned long sigs;
unsigned long pflag;
unsigned int rxsize;
unsigned int txsize;
unsigned char reqbit;
unsigned char portidx;
unsigned char portbit;
} stliport_t;
/*
* Use a structure of function pointers to do board level operations.
* These include, enable/disable, paging shared memory, interrupting, etc.
*/
typedef struct stlibrd {
unsigned long magic;
int brdnr;
int brdtype;
int state;
int nrpanels;
int nrports;
int nrdevs;
unsigned int iobase;
int iosize;
unsigned long memaddr;
void *membase;
int memsize;
int pagesize;
int hostoffset;
int slaveoffset;
int bitsize;
int enabval;
int panels[STL_MAXPANELS];
int panelids[STL_MAXPANELS];
void (*init)(struct stlibrd *brdp);
void (*enable)(struct stlibrd *brdp);
void (*reenable)(struct stlibrd *brdp);
void (*disable)(struct stlibrd *brdp);
char *(*getmemptr)(struct stlibrd *brdp, unsigned long offset, int line);
void (*intr)(struct stlibrd *brdp);
void (*reset)(struct stlibrd *brdp);
stliport_t *ports[STL_MAXPORTS];
} stlibrd_t;
/*
* Define MAGIC numbers used for above structures.
*/
#define STLI_PORTMAGIC 0xe671c7a1
#define STLI_BOARDMAGIC 0x4bc6c825
/*****************************************************************************/
#endif
|