Viewing file:  uaccess.h (11.27 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* $Id: uaccess.h,v 1.13 2001/10/01 02:22:01 gniibe Exp $
*
* User space memory access functions
*
* Copyright (C) 1999 Niibe Yutaka
*
* Based on:
* MIPS implementation version 1.15 by
* Copyright (C) 1996, 1997, 1998 by Ralf Baechle
* and i386 version.
*/
#ifndef __ASM_SH_UACCESS_H
#define __ASM_SH_UACCESS_H
#include <linux/errno.h>
#include <linux/sched.h>
#define VERIFY_READ 0
#define VERIFY_WRITE 1
/*
* The fs value determines whether argument validity checking should be
* performed or not. If get_fs() == USER_DS, checking is performed, with
* get_fs() == KERNEL_DS, checking is bypassed.
*
* For historical reasons (Data Segment Register?), these macros are misnamed.
*/
#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFF)
#define USER_DS MAKE_MM_SEG(0x80000000)
#define get_ds() (KERNEL_DS)
#define get_fs() (current->addr_limit)
#define set_fs(x) (current->addr_limit=(x))
#define segment_eq(a,b) ((a).seg == (b).seg)
#define __addr_ok(addr) ((unsigned long)(addr) < (current->addr_limit.seg))
/*
* Uhhuh, this needs 33-bit arithmetic. We have a carry..
*
* sum := addr + size; carry? --> flag = true;
* if (sum >= addr_limit) flag = true;
*/
#define __range_ok(addr,size) ({ \
unsigned long flag,sum; \
__asm__("clrt; addc %3, %1; movt %0; cmp/hi %4, %1; rotcl %0" \
:"=&r" (flag), "=r" (sum) \
:"1" (addr), "r" ((int)(size)), "r" (current->addr_limit.seg) \
:"t"); \
flag; })
#define access_ok(type,addr,size) (__range_ok(addr,size) == 0)
#define __access_ok(addr,size) (__range_ok(addr,size) == 0)
static inline int verify_area(int type, const void * addr, unsigned long size)
{
return access_ok(type,addr,size) ? 0 : -EFAULT;
}
/*
* Uh, these should become the main single-value transfer routines ...
* They automatically use the right size if we just have the right
* pointer type ...
*
* As SuperH uses the same address space for kernel and user data, we
* can just do these as direct assignments.
*
* Careful to not
* (a) re-use the arguments for side effects (sizeof is ok)
* (b) require any knowledge of processes at this stage
*/
#define put_user(x,ptr) __put_user_check((x),(ptr),sizeof(*(ptr)))
#define get_user(x,ptr) __get_user_check((x),(ptr),sizeof(*(ptr)))
/*
* The "__xxx" versions do not do address space checking, useful when
* doing multiple accesses to the same area (the user has to do the
* checks by hand with "access_ok()")
*/
#define __put_user(x,ptr) __put_user_nocheck((x),(ptr),sizeof(*(ptr)))
#define __get_user(x,ptr) __get_user_nocheck((x),(ptr),sizeof(*(ptr)))
struct __large_struct { unsigned long buf[100]; };
#define __m(x) (*(struct __large_struct *)(x))
#define __get_user_nocheck(x,ptr,size) ({ \
long __gu_err; \
__typeof(*(ptr)) __gu_val; \
long __gu_addr; \
__asm__("":"=r" (__gu_val)); \
__gu_addr = (long) (ptr); \
__asm__("":"=r" (__gu_err)); \
switch (size) { \
case 1: __get_user_asm("b"); break; \
case 2: __get_user_asm("w"); break; \
case 4: __get_user_asm("l"); break; \
default: __get_user_unknown(); break; \
} x = (__typeof__(*(ptr))) __gu_val; __gu_err; })
#define __get_user_check(x,ptr,size) ({ \
long __gu_err; \
__typeof__(*(ptr)) __gu_val; \
long __gu_addr; \
__asm__("":"=r" (__gu_val)); \
__gu_addr = (long) (ptr); \
__asm__("":"=r" (__gu_err)); \
if (__access_ok(__gu_addr,size)) { \
switch (size) { \
case 1: __get_user_asm("b"); break; \
case 2: __get_user_asm("w"); break; \
case 4: __get_user_asm("l"); break; \
default: __get_user_unknown(); break; \
} } x = (__typeof__(*(ptr))) __gu_val; __gu_err; })
#define __get_user_asm(insn) \
({ \
__asm__ __volatile__( \
"1:\n\t" \
"mov." insn " %2, %1\n\t" \
"mov #0, %0\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
"3:\n\t" \
"mov #0, %1\n\t" \
"mov.l 4f, %0\n\t" \
"jmp @%0\n\t" \
" mov %3, %0\n" \
"4: .long 2b\n\t" \
".previous\n" \
".section __ex_table,\"a\"\n\t" \
".long 1b, 3b\n\t" \
".previous" \
:"=&r" (__gu_err), "=&r" (__gu_val) \
:"m" (__m(__gu_addr)), "i" (-EFAULT)); })
extern void __get_user_unknown(void);
#define __put_user_nocheck(x,ptr,size) ({ \
long __pu_err; \
__typeof__(*(ptr)) __pu_val; \
long __pu_addr; \
__pu_val = (x); \
__pu_addr = (long) (ptr); \
__asm__("":"=r" (__pu_err)); \
switch (size) { \
case 1: __put_user_asm("b"); break; \
case 2: __put_user_asm("w"); break; \
case 4: __put_user_asm("l"); break; \
case 8: __put_user_u64(__pu_val,__pu_addr,__pu_err); break; \
default: __put_user_unknown(); break; \
} __pu_err; })
#define __put_user_check(x,ptr,size) ({ \
long __pu_err; \
__typeof__(*(ptr)) __pu_val; \
long __pu_addr; \
__pu_val = (x); \
__pu_addr = (long) (ptr); \
__asm__("":"=r" (__pu_err)); \
if (__access_ok(__pu_addr,size)) { \
switch (size) { \
case 1: __put_user_asm("b"); break; \
case 2: __put_user_asm("w"); break; \
case 4: __put_user_asm("l"); break; \
case 8: __put_user_u64(__pu_val,__pu_addr,__pu_err); break; \
default: __put_user_unknown(); break; \
} } __pu_err; })
#define __put_user_asm(insn) \
({ \
__asm__ __volatile__( \
"1:\n\t" \
"mov." insn " %1, %2\n\t" \
"mov #0, %0\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
"3:\n\t" \
"nop\n\t" \
"mov.l 4f, %0\n\t" \
"jmp @%0\n\t" \
"mov %3, %0\n" \
"4: .long 2b\n\t" \
".previous\n" \
".section __ex_table,\"a\"\n\t" \
".long 1b, 3b\n\t" \
".previous" \
:"=&r" (__pu_err) \
:"r" (__pu_val), "m" (__m(__pu_addr)), "i" (-EFAULT) \
:"memory"); })
#if defined(__LITTLE_ENDIAN__)
#define __put_user_u64(val,addr,retval) \
({ \
__asm__ __volatile__( \
"1:\n\t" \
"mov.l %R1,%2\n\t" \
"mov.l %S1,%T2\n\t" \
"mov #0,%0\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
"3:\n\t" \
"nop\n\t" \
"mov.l 4f,%0\n\t" \
"jmp @%0\n\t" \
" mov %3,%0\n" \
"4: .long 2b\n\t" \
".previous\n" \
".section __ex_table,\"a\"\n\t" \
".long 1b, 3b\n\t" \
".previous" \
: "=r" (retval) \
: "r" (val), "m" (__m(addr)), "i" (-EFAULT) \
: "memory"); })
#else
#define __put_user_u64(val,addr,retval) \
({ \
__asm__ __volatile__( \
"1:\n\t" \
"mov.l %S1,%2\n\t" \
"mov.l %R1,%T2\n\t" \
"mov #0,%0\n" \
"2:\n" \
".section .fixup,\"ax\"\n" \
"3:\n\t" \
"nop\n\t" \
"mov.l 4f,%0\n\t" \
"jmp @%0\n\t" \
" mov %3,%0\n" \
"4: .long 2b\n\t" \
".previous\n" \
".section __ex_table,\"a\"\n\t" \
".long 1b, 3b\n\t" \
".previous" \
: "=r" (retval) \
: "r" (val), "m" (__m(addr)), "i" (-EFAULT) \
: "memory"); })
#endif
extern void __put_user_unknown(void);
/* Generic arbitrary sized copy. */
/* Return the number of bytes NOT copied */
/* XXX: should be such that: 4byte and the rest. */
static __inline__ __kernel_size_t
__copy_user(void *__to, const void *__from, __kernel_size_t __n)
{
unsigned long __dummy, _f, _t;
__kernel_size_t res;
if ((res = __n))
__asm__ __volatile__(
"9:\n\t"
"mov.b @%2+, %1\n\t"
"dt %0\n"
"1:\n\t"
"mov.b %1, @%3\n\t"
"bf/s 9b\n\t"
" add #1, %3\n"
"2:\n"
".section .fixup,\"ax\"\n"
"3:\n\t"
"mov.l 5f, %1\n\t"
"jmp @%1\n\t"
" add #1, %0\n\t"
".balign 4\n"
"5: .long 2b\n"
".previous\n"
".section __ex_table,\"a\"\n"
" .balign 4\n"
" .long 9b,2b\n"
" .long 1b,3b\n"
".previous"
: "=r" (res), "=&z" (__dummy), "=r" (_f), "=r" (_t)
: "2" (__from), "3" (__to), "0" (res)
: "memory", "t");
return res;
}
#define copy_to_user(to,from,n) ({ \
void *__copy_to = (void *) (to); \
__kernel_size_t __copy_size = (__kernel_size_t) (n); \
__kernel_size_t __copy_res; \
if(__copy_size && __access_ok((unsigned long)__copy_to, __copy_size)) { \
__copy_res = __copy_user(__copy_to, (void *) (from), __copy_size); \
} else __copy_res = __copy_size; \
__copy_res; })
#define __copy_to_user(to,from,n) \
__copy_user((void *)(to), \
(void *)(from), n)
#define copy_from_user(to,from,n) ({ \
void *__copy_to = (void *) (to); \
void *__copy_from = (void *) (from); \
__kernel_size_t __copy_size = (__kernel_size_t) (n); \
__kernel_size_t __copy_res; \
if(__copy_size && __access_ok((unsigned long)__copy_from, __copy_size)) { \
__copy_res = __copy_user(__copy_to, __copy_from, __copy_size); \
} else __copy_res = __copy_size; \
__copy_res; })
#define __copy_from_user(to,from,n) \
__copy_user((void *)(to), \
(void *)(from), n)
/* XXX: Not sure it works well..
should be such that: 4byte clear and the rest. */
static __inline__ __kernel_size_t
__clear_user(void *addr, __kernel_size_t size)
{
unsigned long __a;
__asm__ __volatile__(
"9:\n\t"
"dt %0\n"
"1:\n\t"
"mov.b %4, @%1\n\t"
"bf/s 9b\n\t"
" add #1, %1\n"
"2:\n"
".section .fixup,\"ax\"\n"
"3:\n\t"
"mov.l 4f, %1\n\t"
"jmp @%1\n\t"
" nop\n"
".balign 4\n"
"4: .long 2b\n"
".previous\n"
".section __ex_table,\"a\"\n"
" .balign 4\n"
" .long 1b,3b\n"
".previous"
: "=r" (size), "=r" (__a)
: "0" (size), "1" (addr), "r" (0)
: "memory", "t");
return size;
}
#define clear_user(addr,n) ({ \
void * __cl_addr = (addr); \
unsigned long __cl_size = (n); \
if (__cl_size && __access_ok(((unsigned long)(__cl_addr)), __cl_size)) \
__cl_size = __clear_user(__cl_addr, __cl_size); \
__cl_size; })
static __inline__ int
__strncpy_from_user(unsigned long __dest, unsigned long __src, int __count)
{
__kernel_size_t res;
unsigned long __dummy, _d, _s;
__asm__ __volatile__(
"9:\n"
"mov.b @%2+, %1\n\t"
"cmp/eq #0, %1\n\t"
"bt/s 2f\n"
"1:\n"
"mov.b %1, @%3\n\t"
"dt %7\n\t"
"bf/s 9b\n\t"
" add #1, %3\n\t"
"2:\n\t"
"sub %7, %0\n"
"3:\n"
".section .fixup,\"ax\"\n"
"4:\n\t"
"mov.l 5f, %1\n\t"
"jmp @%1\n\t"
" mov %8, %0\n\t"
".balign 4\n"
"5: .long 3b\n"
".previous\n"
".section __ex_table,\"a\"\n"
" .balign 4\n"
" .long 9b,4b\n"
".previous"
: "=r" (res), "=&z" (__dummy), "=r" (_s), "=r" (_d)
: "0" (__count), "2" (__src), "3" (__dest), "r" (__count),
"i" (-EFAULT)
: "memory", "t");
return res;
}
#define strncpy_from_user(dest,src,count) ({ \
unsigned long __sfu_src = (unsigned long) (src); \
int __sfu_count = (int) (count); \
long __sfu_res = -EFAULT; \
if(__access_ok(__sfu_src, __sfu_count)) { \
__sfu_res = __strncpy_from_user((unsigned long) (dest), __sfu_src, __sfu_count); \
} __sfu_res; })
#define strlen_user(str) strnlen_user(str, ~0UL >> 1)
/*
* Return the size of a string (including the ending 0!)
*/
static __inline__ long __strnlen_user(const char *__s, long __n)
{
unsigned long res;
unsigned long __dummy;
__asm__ __volatile__(
"9:\n"
"cmp/eq %4, %0\n\t"
"bt 2f\n"
"1:\t"
"mov.b @(%0,%3), %1\n\t"
"tst %1, %1\n\t"
"bf/s 9b\n\t"
" add #1, %0\n"
"2:\n"
".section .fixup,\"ax\"\n"
"3:\n\t"
"mov.l 4f, %1\n\t"
"jmp @%1\n\t"
" mov %5, %0\n"
".balign 4\n"
"4: .long 2b\n"
".previous\n"
".section __ex_table,\"a\"\n"
" .balign 4\n"
" .long 1b,3b\n"
".previous"
: "=z" (res), "=&r" (__dummy)
: "0" (0), "r" (__s), "r" (__n), "i" (-EFAULT)
: "t");
return res;
}
static __inline__ long strnlen_user(const char *s, long n)
{
if (!__addr_ok(s))
return 0;
else
return __strnlen_user(s, n);
}
struct exception_table_entry
{
unsigned long insn, fixup;
};
/* Returns 0 if exception not found and fixup.unit otherwise. */
extern unsigned long search_exception_table(unsigned long addr);
/* Returns the new pc */
#define fixup_exception(map_reg, fixup_unit, pc) \
({ \
fixup_unit; \
})
#endif /* __ASM_SH_UACCESS_H */
|