Viewing file:  signal.h (5.91 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* $Id: signal.h,v 1.6 1999/08/18 23:37:49 ralf Exp $
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
* Copyright (C) 1995, 1996, 1997, 1998, 1999 by Ralf Baechle
* Copyright (C) 1999 Silicon Graphics, Inc.
*/
#ifndef _ASM_SIGNAL_H
#define _ASM_SIGNAL_H
#include <linux/types.h>
#define _NSIG 128
#define _NSIG_BPW 32
#define _NSIG_WORDS (_NSIG / _NSIG_BPW)
typedef struct {
unsigned long sig[_NSIG_WORDS];
} sigset_t;
typedef unsigned long old_sigset_t; /* at least 32 bits */
#define SIGHUP 1 /* Hangup (POSIX). */
#define SIGINT 2 /* Interrupt (ANSI). */
#define SIGQUIT 3 /* Quit (POSIX). */
#define SIGILL 4 /* Illegal instruction (ANSI). */
#define SIGTRAP 5 /* Trace trap (POSIX). */
#define SIGIOT 6 /* IOT trap (4.2 BSD). */
#define SIGABRT SIGIOT /* Abort (ANSI). */
#define SIGEMT 7
#define SIGFPE 8 /* Floating-point exception (ANSI). */
#define SIGKILL 9 /* Kill, unblockable (POSIX). */
#define SIGBUS 10 /* BUS error (4.2 BSD). */
#define SIGSEGV 11 /* Segmentation violation (ANSI). */
#define SIGSYS 12
#define SIGPIPE 13 /* Broken pipe (POSIX). */
#define SIGALRM 14 /* Alarm clock (POSIX). */
#define SIGTERM 15 /* Termination (ANSI). */
#define SIGUSR1 16 /* User-defined signal 1 (POSIX). */
#define SIGUSR2 17 /* User-defined signal 2 (POSIX). */
#define SIGCHLD 18 /* Child status has changed (POSIX). */
#define SIGCLD SIGCHLD /* Same as SIGCHLD (System V). */
#define SIGPWR 19 /* Power failure restart (System V). */
#define SIGWINCH 20 /* Window size change (4.3 BSD, Sun). */
#define SIGURG 21 /* Urgent condition on socket (4.2 BSD). */
#define SIGIO 22 /* I/O now possible (4.2 BSD). */
#define SIGPOLL SIGIO /* Pollable event occurred (System V). */
#define SIGSTOP 23 /* Stop, unblockable (POSIX). */
#define SIGTSTP 24 /* Keyboard stop (POSIX). */
#define SIGCONT 25 /* Continue (POSIX). */
#define SIGTTIN 26 /* Background read from tty (POSIX). */
#define SIGTTOU 27 /* Background write to tty (POSIX). */
#define SIGVTALRM 28 /* Virtual alarm clock (4.2 BSD). */
#define SIGPROF 29 /* Profiling alarm clock (4.2 BSD). */
#define SIGXCPU 30 /* CPU limit exceeded (4.2 BSD). */
#define SIGXFSZ 31 /* File size limit exceeded (4.2 BSD). */
/* These should not be considered constants from userland. */
#define SIGRTMIN 32
#define SIGRTMAX (_NSIG-1)
/*
* SA_FLAGS values:
*
* SA_ONSTACK indicates that a registered stack_t will be used.
* SA_INTERRUPT is a no-op, but left due to historical reasons. Use the
* SA_RESTART flag to get restarting signals (which were the default long ago)
* SA_NOCLDSTOP flag to turn off SIGCHLD when children stop.
* SA_RESETHAND clears the handler when the signal is delivered.
* SA_NOCLDWAIT flag on SIGCHLD to inhibit zombies.
* SA_NODEFER prevents the current signal from being masked in the handler.
*
* SA_ONESHOT and SA_NOMASK are the historical Linux names for the Single
* Unix names RESETHAND and NODEFER respectively.
*/
#define SA_ONSTACK 0x08000000
#define SA_RESETHAND 0x80000000
#define SA_RESTART 0x10000000
#define SA_SIGINFO 0x00000008
#define SA_NODEFER 0x40000000
#define SA_NOCLDWAIT 0x00010000 /* Not supported yet */
#define SA_NOCLDSTOP 0x00000001
#define SA_NOMASK SA_NODEFER
#define SA_ONESHOT SA_RESETHAND
#define SA_INTERRUPT 0x20000000 /* dummy -- ignored */
#define SA_RESTORER 0x04000000
/*
* sigaltstack controls
*/
#define SS_ONSTACK 1
#define SS_DISABLE 2
#define MINSIGSTKSZ 2048
#define SIGSTKSZ 8192
#ifdef __KERNEL__
/*
* These values of sa_flags are used only by the kernel as part of the
* irq handling routines.
*
* SA_INTERRUPT is also used by the irq handling routines.
* SA_SHIRQ flag is for shared interrupt support on PCI and EISA.
*/
#define SA_PROBE SA_ONESHOT
#define SA_SAMPLE_RANDOM SA_RESTART
#define SA_SHIRQ 0x02000000
#endif /* __KERNEL__ */
#define SIG_BLOCK 1 /* for blocking signals */
#define SIG_UNBLOCK 2 /* for unblocking signals */
#define SIG_SETMASK 3 /* for setting the signal mask */
#define SIG_SETMASK32 256 /* Goodie from SGI for BSD compatibility:
set only the low 32 bit of the sigset. */
/* Type of a signal handler. */
typedef void (*__sighandler_t)(int);
/* Fake signal functions */
#define SIG_DFL ((__sighandler_t)0) /* default signal handling */
#define SIG_IGN ((__sighandler_t)1) /* ignore signal */
#define SIG_ERR ((__sighandler_t)-1) /* error return from signal */
struct sigaction {
unsigned int sa_flags;
__sighandler_t sa_handler;
sigset_t sa_mask;
void (*sa_restorer)(void);
int sa_resv[1]; /* reserved */
};
struct k_sigaction {
struct sigaction sa;
};
/* IRIX compatible stack_t */
typedef struct sigaltstack {
void *ss_sp;
size_t ss_size;
int ss_flags;
} stack_t;
#ifdef __KERNEL__
#include <asm/sigcontext.h>
/*
* The following break codes are or were in use for specific purposes in
* other MIPS operating systems. Linux/MIPS doesn't use all of them. The
* unused ones are here as placeholders; we might encounter them in
* non-Linux/MIPS object files or make use of them in the future.
*/
#define BRK_USERBP 0 /* User bp (used by debuggers) */
#define BRK_KERNELBP 1 /* Break in the kernel */
#define BRK_ABORT 2 /* Sometimes used by abort(3) to SIGIOT */
#define BRK_BD_TAKEN 3 /* For bd slot emulation - not implemented */
#define BRK_BD_NOTTAKEN 4 /* For bd slot emulation - not implemented */
#define BRK_SSTEPBP 5 /* User bp (used by debuggers) */
#define BRK_OVERFLOW 6 /* Overflow check */
#define BRK_DIVZERO 7 /* Divide by zero check */
#define BRK_RANGE 8 /* Range error check */
#define BRK_STACKOVERFLOW 9 /* For Ada stackchecking */
#define BRK_NORLD 10 /* No rld found - not used by Linux/MIPS */
#define _BRK_THREADBP 11 /* For threads, user bp (used by debuggers) */
#define BRK_MULOVF 1023 /* Multiply overflow */
#endif /* defined (__KERNEL__) */
#endif /* _ASM_SIGNAL_H */
|