Viewing file:  irq.h (3.44 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
#ifndef _M68K_IRQ_H_
#define _M68K_IRQ_H_
#include <linux/config.h>
/*
* # of m68k interrupts
*/
#define SYS_IRQS 8
/*
* This should be the same as the max(NUM_X_SOURCES) for all the
* different m68k hosts compiled into the kernel.
* Currently the Atari has 72 and the Amiga 24, but if both are
* supported in the kernel it is better to make room for 72.
*/
#if defined(CONFIG_ATARI) || defined(CONFIG_MAC)
#define NR_IRQS (72+SYS_IRQS)
#else
#define NR_IRQS (24+SYS_IRQS)
#endif
/*
* Interrupt source definitions
* General interrupt sources are the level 1-7.
* Adding an interrupt service routine for one of these sources
* results in the addition of that routine to a chain of routines.
* Each one is called in succession. Each individual interrupt
* service routine should determine if the device associated with
* that routine requires service.
*/
#define IRQ1 (1) /* level 1 interrupt */
#define IRQ2 (2) /* level 2 interrupt */
#define IRQ3 (3) /* level 3 interrupt */
#define IRQ4 (4) /* level 4 interrupt */
#define IRQ5 (5) /* level 5 interrupt */
#define IRQ6 (6) /* level 6 interrupt */
#define IRQ7 (7) /* level 7 interrupt (non-maskable) */
/*
* "Generic" interrupt sources
*/
#define IRQ_SCHED_TIMER (8) /* interrupt source for scheduling timer */
static __inline__ int irq_cannonicalize(int irq)
{
return irq;
}
/*
* Machine specific interrupt sources.
*
* Adding an interrupt service routine for a source with this bit
* set indicates a special machine specific interrupt source.
* The machine specific files define these sources.
*
* The IRQ_MACHSPEC bit is now gone - the only thing it did was to
* introduce unnecessary overhead.
*
* All interrupt handling is actually machine specific so it is better
* to use function pointers, as used by the Sparc port, and select the
* interrupt handling functions when initializing the kernel. This way
* we save some unnecessary overhead at run-time.
* 01/11/97 - Jes
*/
extern void (*enable_irq)(unsigned int);
extern void (*disable_irq)(unsigned int);
#define disable_irq_nosync disable_irq
#define enable_irq_nosync enable_irq
extern int sys_request_irq(unsigned int,
void (*)(int, void *, struct pt_regs *),
unsigned long, const char *, void *);
extern void sys_free_irq(unsigned int, void *);
/*
* various flags for request_irq() - the Amiga now uses the standard
* mechanism like all other architectures - SA_INTERRUPT and SA_SHIRQ
* are your friends.
*/
#ifndef CONFIG_AMIGA
#define IRQ_FLG_LOCK (0x0001) /* handler is not replaceable */
#define IRQ_FLG_REPLACE (0x0002) /* replace existing handler */
#define IRQ_FLG_FAST (0x0004)
#define IRQ_FLG_SLOW (0x0008)
#define IRQ_FLG_STD (0x8000) /* internally used */
#endif
/*
* This structure is used to chain together the ISRs for a particular
* interrupt source (if it supports chaining).
*/
typedef struct irq_node {
void (*handler)(int, void *, struct pt_regs *);
unsigned long flags;
void *dev_id;
const char *devname;
struct irq_node *next;
} irq_node_t;
/*
* This structure has only 4 elements for speed reasons
*/
typedef struct irq_handler {
void (*handler)(int, void *, struct pt_regs *);
unsigned long flags;
void *dev_id;
const char *devname;
} irq_handler_t;
/* count of spurious interrupts */
extern volatile unsigned int num_spurious;
/*
* This function returns a new irq_node_t
*/
extern irq_node_t *new_irq_node(void);
#endif /* _M68K_IRQ_H_ */
|