Viewing file:  ecard.h (5.97 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* linux/include/asm-arm/ecard.h
*
* definitions for expansion cards
*
* This is a new system as from Linux 1.2.3
*
* Changelog:
* 11-12-1996 RMK Further minor improvements
* 12-09-1997 RMK Added interrupt enable/disable for card level
*
* Reference: Acorns Risc OS 3 Programmers Reference Manuals.
*/
#ifndef __ASM_ECARD_H
#define __ASM_ECARD_H
/*
* Currently understood cards (but not necessarily
* supported):
* Manufacturer Product ID
*/
#define MANU_ACORN 0x0000
#define PROD_ACORN_SCSI 0x0002
#define PROD_ACORN_ETHER1 0x0003
#define PROD_ACORN_MFM 0x000b
#define MANU_ANT2 0x0011
#define PROD_ANT_ETHER3 0x00a4
#define MANU_ATOMWIDE 0x0017
#define PROD_ATOMWIDE_3PSERIAL 0x0090
#define MANU_IRLAM_INSTRUMENTS 0x001f
#define MANU_IRLAM_INSTRUMENTS_ETHERN 0x5678
#define MANU_OAK 0x0021
#define PROD_OAK_SCSI 0x0058
#define MANU_MORLEY 0x002b
#define PROD_MORLEY_SCSI_UNCACHED 0x0067
#define MANU_CUMANA 0x003a
#define PROD_CUMANA_SCSI_2 0x003a
#define PROD_CUMANA_SCSI_1 0x00a0
#define MANU_ICS 0x003c
#define PROD_ICS_IDE 0x00ae
#define MANU_ICS2 0x003d
#define PROD_ICS2_IDE 0x00ae
#define MANU_SERPORT 0x003f
#define PROD_SERPORT_DSPORT 0x00b9
#define MANU_I3 0x0046
#define PROD_I3_ETHERLAN500 0x00d4
#define PROD_I3_ETHERLAN600 0x00ec
#define PROD_I3_ETHERLAN600A 0x011e
#define MANU_ANT 0x0053
#define PROD_ANT_ETHERM 0x00d8
#define PROD_ANT_ETHERB 0x00e4
#define MANU_ALSYSTEMS 0x005b
#define PROD_ALSYS_SCSIATAPI 0x0107
#define MANU_MCS 0x0063
#define PROD_MCS_CONNECT32 0x0125
#define MANU_EESOX 0x0064
#define PROD_EESOX_SCSI2 0x008c
#define MANU_YELLOWSTONE 0x0096
#define PROD_YELLOWSTONE_RAPIDE32 0x0120
#ifdef ECARD_C
#define CONST
#else
#define CONST const
#endif
#define MAX_ECARDS 9
typedef enum { /* Cards address space */
ECARD_IOC,
ECARD_MEMC,
ECARD_EASI
} card_type_t;
typedef enum { /* Speed for ECARD_IOC space */
ECARD_SLOW = 0,
ECARD_MEDIUM = 1,
ECARD_FAST = 2,
ECARD_SYNC = 3
} card_speed_t;
typedef struct { /* Card ID structure */
unsigned short manufacturer;
unsigned short product;
} card_ids;
struct in_ecid { /* Packed card ID information */
unsigned short product; /* Product code */
unsigned short manufacturer; /* Manufacturer code */
unsigned char id:4; /* Simple ID */
unsigned char cd:1; /* Chunk dir present */
unsigned char is:1; /* Interrupt status pointers */
unsigned char w:2; /* Width */
unsigned char country; /* Country */
unsigned char irqmask; /* IRQ mask */
unsigned char fiqmask; /* FIQ mask */
unsigned long irqoff; /* IRQ offset */
unsigned long fiqoff; /* FIQ offset */
};
typedef struct expansion_card ecard_t;
typedef unsigned long *loader_t;
typedef struct { /* Card handler routines */
void (*irqenable)(ecard_t *ec, int irqnr);
void (*irqdisable)(ecard_t *ec, int irqnr);
int (*irqpending)(ecard_t *ec);
void (*fiqenable)(ecard_t *ec, int fiqnr);
void (*fiqdisable)(ecard_t *ec, int fiqnr);
int (*fiqpending)(ecard_t *ec);
} expansioncard_ops_t;
/*
* This contains all the info needed on an expansion card
*/
struct expansion_card {
struct expansion_card *next;
/* Public data */
volatile unsigned char *irqaddr; /* address of IRQ register */
volatile unsigned char *fiqaddr; /* address of FIQ register */
unsigned char irqmask; /* IRQ mask */
unsigned char fiqmask; /* FIQ mask */
unsigned char claimed; /* Card claimed? */
void *irq_data; /* Data for use for IRQ by card */
void *fiq_data; /* Data for use for FIQ by card */
expansioncard_ops_t *ops; /* Enable/Disable Ops for card */
CONST unsigned int slot_no; /* Slot number */
CONST unsigned int dma; /* DMA number (for request_dma) */
CONST unsigned int irq; /* IRQ number (for request_irq) */
CONST unsigned int fiq; /* FIQ number (for request_irq) */
CONST card_type_t type; /* Type of card */
CONST struct in_ecid cid; /* Card Identification */
/* Private internal data */
const char *card_desc; /* Card description */
CONST unsigned int podaddr; /* Base Linux address for card */
CONST loader_t loader; /* loader program */
};
struct in_chunk_dir {
unsigned int start_offset;
union {
unsigned char string[256];
unsigned char data[1];
} d;
};
/*
* ecard_claim: claim an expansion card entry
*/
#define ecard_claim(ec) ((ec)->claimed = 1)
/*
* ecard_release: release an expansion card entry
*/
#define ecard_release(ec) ((ec)->claimed = 0)
/*
* Start finding cards from the top of the list
*/
extern void ecard_startfind (void);
/*
* Find an expansion card with the correct cid, product and manufacturer code
*/
extern struct expansion_card *ecard_find (int cid, const card_ids *ids);
/*
* Read a chunk from an expansion card
* cd : where to put read data
* ec : expansion card info struct
* id : id number to find
* num: (n+1)'th id to find.
*/
extern int ecard_readchunk (struct in_chunk_dir *cd, struct expansion_card *ec, int id, int num);
/*
* Obtain the address of a card
*/
extern unsigned int ecard_address (struct expansion_card *ec, card_type_t card_type, card_speed_t speed);
#ifdef ECARD_C
/* Definitions internal to ecard.c - for it's use only!!
*
* External expansion card header as read from the card
*/
struct ex_ecid {
unsigned char r_irq:1;
unsigned char r_zero:1;
unsigned char r_fiq:1;
unsigned char r_id:4;
unsigned char r_a:1;
unsigned char r_cd:1;
unsigned char r_is:1;
unsigned char r_w:2;
unsigned char r_r1:4;
unsigned char r_r2:8;
unsigned char r_prod[2];
unsigned char r_manu[2];
unsigned char r_country;
unsigned char r_irqmask;
unsigned char r_irqoff[3];
unsigned char r_fiqmask;
unsigned char r_fiqoff[3];
};
/*
* Chunk directory entry as read from the card
*/
struct ex_chunk_dir {
unsigned char r_id;
unsigned char r_len[3];
unsigned long r_start;
union {
char string[256];
char data[1];
} d;
#define c_id(x) ((x)->r_id)
#define c_len(x) ((x)->r_len[0]|((x)->r_len[1]<<8)|((x)->r_len[2]<<16))
#define c_start(x) ((x)->r_start)
};
#endif
#endif
|