Viewing file:  freebird.h (2.52 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
*
*/
#ifndef __ASM_ARCH_HARDWARE_H
#error "include <asm/hardware.h> instead"
#endif
/* Board Control Register */
#define BCR_BASE 0xf0000000
#define BCR (*(volatile unsigned int *)(BCR_BASE))
#define BCR_DB1110 (0x00A07410)
#define BCR_FREEBIRD_AUDIO_PWR (1<<0) /* Audio Power (1 = on, 0 = off) */
#define BCR_FREEBIRD_LCD_PWR (1<<1) /* LCD Power (1 = on) */
#define BCR_FREEBIRD_CODEC_RST (1<<2) /* 0 = Holds UCB1300, ADI7171, and UDA1341 in reset */
#define BCR_FREEBIRD_IRDA_FSEL (1<<3) /* IRDA Frequency select (0 = SIR, 1 = MIR/ FIR) */
#define BCR_FREEBIRD_IRDA_MD0 (1<<4) /* Range/Power select */
#define BCR_FREEBIRD_IRDA_MD1 (1<<5) /* Range/Power select */
#define BCR_FREEBIRD_LCD_DISP (1<<7) /* LCD display (1 = on, 0 = off */
#define BCR_FREEBIRD_LCD_BACKLIGHT (1<<16) /* LCD backlight ,1=on */
#define BCR_FREEBIRD_LCD_LIGHT_INC (1<<17) /* LCD backlight brightness */
#define BCR_FREEBIRD_LCD_LIGHT_DU (1<<18) /* LCD backlight brightness */
#define BCR_FREEBIRD_LCD_INC (1<<19) /* LCD contrast */
#define BCR_FREEBIRD_LCD_DU (1<<20) /* LCD contrast */
#define BCR_FREEBIRD_QMUTE (1<<21) /* Quick Mute */
#define BCR_FREEBIRD_ALARM_LED (1<<22) /* ALARM LED control */
#define BCR_FREEBIRD_SPK_OFF (1<<23) /* 1 = Speaker amplifier power off */
#ifndef __ASSEMBLY__
extern unsigned long BCR_value;
#define BCR_set( x ) BCR = (BCR_value |= (x))
#define BCR_clear( x ) BCR = (BCR_value &= ~(x))
#endif
/* GPIOs for which the generic definition doesn't say much */
#define GPIO_FREEBIRD_NPOWER_BUTTON GPIO_GPIO(0)
#define GPIO_FREEBIRD_APP1_BUTTON GPIO_GPIO(1)
#define GPIO_FREEBIRD_APP2_BUTTON GPIO_GPIO(2)
#define GPIO_FREEBIRD_APP3_BUTTOM GPIO_GPIO(3)
#define GPIO_FREEBIRD_UCB1300 GPIO_GPIO(4)
#define GPIO_FREEBIRD_EXPWR GPIO_GPIO(8)
#define GPIO_FREEBIRD_CHARGING GPIO_GPIO(9)
#define GPIO_FREEBIRD_RAMD GPIO_GPIO(14)
#define GPIO_FREEBIRD_L3_DATA GPIO_GPIO(15)
#define GPIO_FREEBIRD_L3_MODE GPIO_GPIO(17)
#define GPIO_FREEBIRD_L3_CLOCK GPIO_GPIO(18)
#define GPIO_FREEBIRD_STEREO_64FS_CLK GPIO_GPIO(10)
#define GPIO_FREEBIRD_CF_CD GPIO_GPIO(22)
#define GPIO_FREEBIRD_CF_IRQ GPIO_GPIO(21)
#define GPIO_FREEBIRD_CF_BVD GPIO_GPIO(25)
#define IRQ_GPIO_FREEBIRD_NPOWER_BUTTON IRQ_GPIO0
#define IRQ_GPIO_FREEBIRD_APP1_BUTTON IRQ_GPIO1
#define IRQ_GPIO_FREEBIRD_APP2_BUTTON IRQ_GPIO2
#define IRQ_GPIO_FREEBIRD_APP3_BUTTON IRQ_GPIO3
#define IRQ_GPIO_FREEBIRD_UCB1300_IRQ IRQ_GPIO4
#define IRQ_GPIO_FREEBIRD_CF_IRQ IRQ_GPIO21
#define IRQ_GPIO_FREEBIRD_CF_CD IRQ_GPIO22
#define IRQ_GPIO_FREEBIRD_CF_BVD IRQ_GPIO25
|