Viewing file:  time.h (1.71 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* linux/include/asm-arm/arch-l7200/time.h
*
* Copyright (C) 2000 Rob Scott (rscott@mtrob.fdns.net)
* Steve Hill (sjhill@cotw.com)
*
* Changelog:
* 01-02-2000 RS Created l7200 version, derived from rpc code
* 05-03-2000 SJH Complete rewrite
*/
#ifndef _ASM_ARCH_TIME_H
#define _ASM_ARCH_TIME_H
#include <asm/arch/irqs.h>
/*
* RTC base register address
*/
#define RTC_BASE (IO_BASE_2 + 0x2000)
/*
* RTC registers
*/
#define RTC_RTCDR (*(volatile unsigned char *) (RTC_BASE + 0x000))
#define RTC_RTCMR (*(volatile unsigned char *) (RTC_BASE + 0x004))
#define RTC_RTCS (*(volatile unsigned char *) (RTC_BASE + 0x008))
#define RTC_RTCC (*(volatile unsigned char *) (RTC_BASE + 0x008))
#define RTC_RTCDV (*(volatile unsigned char *) (RTC_BASE + 0x00c))
#define RTC_RTCCR (*(volatile unsigned char *) (RTC_BASE + 0x010))
/*
* RTCCR register values
*/
#define RTC_RATE_32 0x00 /* 32 Hz tick */
#define RTC_RATE_64 0x10 /* 64 Hz tick */
#define RTC_RATE_128 0x20 /* 128 Hz tick */
#define RTC_RATE_256 0x30 /* 256 Hz tick */
#define RTC_EN_ALARM 0x01 /* Enable alarm */
#define RTC_EN_TIC 0x04 /* Enable counter */
#define RTC_EN_STWDOG 0x08 /* Enable watchdog */
/*
* Handler for RTC timer interrupt
*/
static void timer_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
do_timer(regs);
do_profile(regs);
RTC_RTCC = 0; /* Clear interrupt */
}
/*
* Set up RTC timer interrupt, and return the current time in seconds.
*/
static inline void setup_timer(void)
{
RTC_RTCC = 0; /* Clear interrupt */
timer_irq.handler = timer_interrupt;
setup_arm_irq(IRQ_RTC_TICK, &timer_irq);
RTC_RTCCR = RTC_RATE_128 | RTC_EN_TIC; /* Set rate and enable timer */
}
#endif
|