Viewing file:  ioctl.c (12.33 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* linux/fs/umsdos/ioctl.c
*
* Written 1993 by Jacques Gelinas
*
* Extended MS-DOS ioctl directory handling functions
*/
#include <asm/uaccess.h>
#include <linux/errno.h>
#include <linux/mm.h>
#include <linux/kernel.h>
#include <linux/sched.h>
#include <linux/fs.h>
#include <linux/msdos_fs.h>
#include <linux/umsdos_fs.h>
struct UMSDOS_DIR_ONCE {
struct dirent *ent;
int count;
};
/*
* Record a single entry the first call.
* Return -EINVAL the next one.
*/
static int umsdos_ioctl_fill (
void *buf,
const char *name,
int name_len,
loff_t offset,
ino_t ino,
unsigned type)
{
int ret = -EINVAL;
struct UMSDOS_DIR_ONCE *d = (struct UMSDOS_DIR_ONCE *) buf;
if (d->count == 0) {
copy_to_user (d->ent->d_name, name, name_len);
put_user ('\0', d->ent->d_name + name_len);
put_user (name_len, &d->ent->d_reclen);
put_user (ino, &d->ent->d_ino);
put_user (offset, &d->ent->d_off);
d->count = 1;
ret = 0;
}
return ret;
}
/*
* Perform special function on a directory
*/
/* #Specification: ioctl / prototypes
* The official prototype for the umsdos ioctl on directory
* is:
*
* int ioctl (
* int fd, // File handle of the directory
* int cmd, // command
* struct umsdos_ioctl *data)
*
* The struct and the commands are defined in linux/umsdos_fs.h.
*
* umsdos_progs/umsdosio.c provide an interface in C++ to all
* these ioctl. umsdos_progs/udosctl is a small utility showing
* all this.
*
* These ioctl generally allow one to work on the EMD or the
* DOS directory independently. These are essential to implement
* the synchronise.
*/
int UMSDOS_ioctl_dir(struct inode *dir, struct file *filp, unsigned int cmd,
unsigned long data_ptr)
{
struct dentry *dentry = filp->f_dentry;
struct umsdos_ioctl *idata = (struct umsdos_ioctl *) data_ptr;
int ret;
struct umsdos_ioctl data;
Printk(("UMSDOS_ioctl_dir: %s/%s, cmd=%d, data=%08lx\n",
dentry->d_parent->d_name.name, dentry->d_name.name, cmd, data_ptr));
/* forward non-umsdos ioctls - this hopefully doesn't cause conflicts */
if (cmd != UMSDOS_GETVERSION
&& cmd != UMSDOS_READDIR_DOS
&& cmd != UMSDOS_READDIR_EMD
&& cmd != UMSDOS_INIT_EMD
&& cmd != UMSDOS_CREAT_EMD
&& cmd != UMSDOS_RENAME_DOS
&& cmd != UMSDOS_UNLINK_EMD
&& cmd != UMSDOS_UNLINK_DOS
&& cmd != UMSDOS_RMDIR_DOS
&& cmd != UMSDOS_STAT_DOS
&& cmd != UMSDOS_DOS_SETUP)
return fat_dir_ioctl (dir, filp, cmd, data_ptr);
/* #Specification: ioctl / access
* Only root (effective id) is allowed to do IOCTL on directory
* in UMSDOS. EPERM is returned for other user.
*/
/*
* Well, not all cases require write access, but it simplifies
* the code, and let's face it, there is only one client (umssync)
* for all this.
*/
ret = verify_area (VERIFY_WRITE, (void *) data_ptr,
sizeof (struct umsdos_ioctl));
if (ret < 0)
goto out;
ret = -EPERM;
if (current->euid != 0 && cmd != UMSDOS_GETVERSION)
goto out;
ret = -EINVAL;
if (cmd == UMSDOS_GETVERSION) {
/* #Specification: ioctl / UMSDOS_GETVERSION
* The field version and release of the structure
* umsdos_ioctl are filled with the version and release
* number of the fs code in the kernel. This will allow
* some form of checking. Users won't be able to run
* incompatible utility such as the synchroniser (umssync).
* umsdos_progs/umsdosio.c enforce this checking.
*
* Return always 0.
*/
put_user (UMSDOS_VERSION, &idata->version);
put_user (UMSDOS_RELEASE, &idata->release);
ret = 0;
goto out;
}
if (cmd == UMSDOS_READDIR_DOS) {
/* #Specification: ioctl / UMSDOS_READDIR_DOS
* One entry is read from the DOS directory at the current
* file position. The entry is put as is in the dos_dirent
* field of struct umsdos_ioctl.
*
* Return > 0 if success.
*/
struct UMSDOS_DIR_ONCE bufk;
bufk.count = 0;
bufk.ent = &idata->dos_dirent;
fat_readdir (filp, &bufk, umsdos_ioctl_fill);
ret = bufk.count == 1 ? 1 : 0;
goto out;
}
if (cmd == UMSDOS_READDIR_EMD) {
/* #Specification: ioctl / UMSDOS_READDIR_EMD
* One entry is read from the EMD at the current
* file position. The entry is put as is in the umsdos_dirent
* field of struct umsdos_ioctl. The corresponding mangled
* DOS entry name is put in the dos_dirent field.
*
* All entries are read including hidden links. Blank
* entries are skipped.
*
* Return > 0 if success.
*/
struct dentry *demd;
loff_t pos = filp->f_pos;
/* The absence of the EMD is simply seen as an EOF */
demd = umsdos_get_emd_dentry(dentry);
ret = PTR_ERR(demd);
if (IS_ERR(demd))
goto out;
ret = 0;
if (!demd->d_inode)
goto read_dput;
while (pos < demd->d_inode->i_size) {
off_t f_pos = pos;
struct umsdos_dirent entry;
struct umsdos_info info;
ret = umsdos_emd_dir_readentry (demd, &pos, &entry);
if (ret == -ENAMETOOLONG) {
printk (KERN_INFO "Fixing EMD entry with invalid size -- zeroing out\n");
memset (&info, 0, sizeof (info));
info.f_pos = f_pos;
info.recsize = UMSDOS_REC_SIZE;
ret = umsdos_writeentry (dentry, &info, 1);
continue;
}
if (ret)
break;
if (entry.name_len <= 0)
continue;
umsdos_parse (entry.name, entry.name_len, &info);
info.f_pos = f_pos;
umsdos_manglename (&info);
ret = -EFAULT;
if (copy_to_user (&idata->umsdos_dirent, &entry,
sizeof (entry)))
break;
if (copy_to_user (&idata->dos_dirent.d_name,
info.fake.fname,
info.fake.len + 1))
break;
ret = entry.name_len;
break;
}
/* update the original f_pos */
filp->f_pos = pos;
read_dput:
d_drop(demd);
dput(demd);
goto out;
}
if (cmd == UMSDOS_INIT_EMD) {
/* #Specification: ioctl / UMSDOS_INIT_EMD
* The UMSDOS_INIT_EMD command makes sure the EMD
* exists for a directory. If it does not, it is
* created. Also, it makes sure the directory function
* table (struct inode_operations) is set to the UMSDOS
* semantic. This mean that umssync may be applied to
* an "opened" msdos directory, and it will change behavior
* on the fly.
*
* Return 0 if success.
*/
ret = umsdos_make_emd(dentry);
Printk(("UMSDOS_ioctl_dir: INIT_EMD %s/%s, ret=%d\n",
dentry->d_parent->d_name.name, dentry->d_name.name, ret));
umsdos_setup_dir (dentry);
goto out;
}
ret = -EFAULT;
if (copy_from_user (&data, idata, sizeof (data)))
goto out;
if (cmd == UMSDOS_CREAT_EMD) {
/* #Specification: ioctl / UMSDOS_CREAT_EMD
* The umsdos_dirent field of the struct umsdos_ioctl is used
* as is to create a new entry in the EMD of the directory.
* The DOS directory is not modified.
* No validation is done (yet).
*
* Return 0 if success.
*/
struct umsdos_info info;
/* This makes sure info.entry and info in general
* is correctly initialised
*/
memcpy (&info.entry, &data.umsdos_dirent,
sizeof (data.umsdos_dirent));
umsdos_parse (data.umsdos_dirent.name
,data.umsdos_dirent.name_len, &info);
ret = umsdos_newentry (dentry, &info);
goto out;
}
else if (cmd == UMSDOS_RENAME_DOS) {
struct dentry *old_dentry, *new_dentry; /* FIXME */
/* #Specification: ioctl / UMSDOS_RENAME_DOS
* A file or directory is renamed in a DOS directory
* (not moved across directory). The source name
* is in the dos_dirent.name field and the destination
* is in umsdos_dirent.name field.
*
* This ioctl allows umssync to rename a mangled file
* name before syncing it back in the EMD.
*/
old_dentry = umsdos_lookup_dentry (dentry,
data.dos_dirent.d_name,
data.dos_dirent.d_reclen ,1);
ret = PTR_ERR(old_dentry);
if (IS_ERR(old_dentry))
goto out;
new_dentry = umsdos_lookup_dentry (dentry,
data.umsdos_dirent.name,
data.umsdos_dirent.name_len, 1);
ret = PTR_ERR(new_dentry);
if (!IS_ERR(new_dentry)) {
printk("umsdos_ioctl: renaming %s/%s to %s/%s\n",
old_dentry->d_parent->d_name.name, old_dentry->d_name.name,
new_dentry->d_parent->d_name.name, new_dentry->d_name.name);
ret = msdos_rename (dir, old_dentry, dir, new_dentry);
d_drop(new_dentry);
d_drop(old_dentry);
dput(new_dentry);
}
dput(old_dentry);
goto out;
}
else if (cmd == UMSDOS_UNLINK_EMD) {
/* #Specification: ioctl / UMSDOS_UNLINK_EMD
* The umsdos_dirent field of the struct umsdos_ioctl is used
* as is to remove an entry from the EMD of the directory.
* No validation is done (yet). The mode field is used
* to validate S_ISDIR or S_ISREG.
*
* Return 0 if success.
*/
struct umsdos_info info;
/* This makes sure info.entry and info in general
* is correctly initialised
*/
memcpy (&info.entry, &data.umsdos_dirent,
sizeof (data.umsdos_dirent));
umsdos_parse (data.umsdos_dirent.name,
data.umsdos_dirent.name_len, &info);
ret = umsdos_delentry (dentry, &info,
S_ISDIR (data.umsdos_dirent.mode));
if (ret) {
printk(KERN_WARNING
"umsdos_ioctl: delentry %s/%s failed, ret=%d\n",
dentry->d_name.name, info.entry.name, ret);
}
goto out;
}
else if (cmd == UMSDOS_UNLINK_DOS) {
struct dentry *temp;
/* #Specification: ioctl / UMSDOS_UNLINK_DOS
* The dos_dirent field of the struct umsdos_ioctl is used to
* execute a msdos_unlink operation. The d_name and d_reclen
* fields are used.
*
* Return 0 if success.
*/
temp = umsdos_lookup_dentry(dentry, data.dos_dirent.d_name,
data.dos_dirent.d_reclen, 1);
ret = PTR_ERR(temp);
if (IS_ERR(temp))
goto out;
ret = -ENOENT;
if (temp->d_inode) {
ret = -EISDIR;
if (!S_ISDIR(temp->d_inode->i_mode))
ret = msdos_unlink (dir, temp);
if (!ret)
d_delete(temp);
}
dput (temp);
goto out;
}
else if (cmd == UMSDOS_RMDIR_DOS) {
struct dentry *temp;
/* #Specification: ioctl / UMSDOS_RMDIR_DOS
* The dos_dirent field of the struct umsdos_ioctl is used to
* execute a msdos_rmdir operation. The d_name and d_reclen
* fields are used.
*
* Return 0 if success.
*/
temp = umsdos_lookup_dentry(dentry, data.dos_dirent.d_name,
data.dos_dirent.d_reclen, 1);
ret = PTR_ERR(temp);
if (IS_ERR(temp))
goto out;
ret = -ENOENT;
if (temp->d_inode) {
ret = -ENOTDIR;
if (S_ISDIR(temp->d_inode->i_mode))
ret = msdos_rmdir (dir, temp);
if (!ret)
d_delete(temp);
}
dput (temp);
goto out;
} else if (cmd == UMSDOS_STAT_DOS) {
/* #Specification: ioctl / UMSDOS_STAT_DOS
* The dos_dirent field of the struct umsdos_ioctl is
* used to execute a stat operation in the DOS directory.
* The d_name and d_reclen fields are used.
*
* The following field of umsdos_ioctl.stat are filled.
*
* st_ino,st_mode,st_size,st_atime,st_mtime,st_ctime,
* Return 0 if success.
*/
struct dentry *dret;
struct inode *inode;
dret = umsdos_lookup_dentry(dentry, data.dos_dirent.d_name,
data.dos_dirent.d_reclen, 1);
ret = PTR_ERR(dret);
if (IS_ERR(dret))
goto out;
ret = -ENOENT;
inode = dret->d_inode;
if (inode) {
data.stat.st_ino = inode->i_ino;
data.stat.st_mode = inode->i_mode;
data.stat.st_size = inode->i_size;
data.stat.st_atime = inode->i_atime;
data.stat.st_ctime = inode->i_ctime;
data.stat.st_mtime = inode->i_mtime;
ret = -EFAULT;
if (!copy_to_user (&idata->stat, &data.stat,
sizeof (data.stat)))
ret = 0;
}
dput(dret);
goto out;
}
else if (cmd == UMSDOS_DOS_SETUP) {
/* #Specification: ioctl / UMSDOS_DOS_SETUP
* The UMSDOS_DOS_SETUP ioctl allow changing the
* default permission of the MS-DOS filesystem driver
* on the fly. The MS-DOS driver applies global permissions
* to every file and directory. Normally these permissions
* are controlled by a mount option. This is not
* available for root partition, so a special utility
* (umssetup) is provided to do this, normally in
* /etc/rc.local.
*
* Be aware that this applies ONLY to MS-DOS directories
* (those without EMD --linux-.---). Umsdos directory
* have independent (standard) permission for each
* and every file.
*
* The field umsdos_dirent provide the information needed.
* umsdos_dirent.uid and gid sets the owner and group.
* umsdos_dirent.mode set the permissions flags.
*/
dir->i_sb->u.msdos_sb.options.fs_uid = data.umsdos_dirent.uid;
dir->i_sb->u.msdos_sb.options.fs_gid = data.umsdos_dirent.gid;
dir->i_sb->u.msdos_sb.options.fs_umask = data.umsdos_dirent.mode;
ret = 0;
}
out:
Printk (("ioctl %d, returning %d\n", cmd, ret));
return ret;
}
|