Viewing file:  skeletonfb.c (10.26 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* linux/drivers/video/skeletonfb.c -- Skeleton for a frame buffer device
*
* Created 28 Dec 1997 by Geert Uytterhoeven
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/mm.h>
#include <linux/tty.h>
#include <linux/slab.h>
#include <linux/delay.h>
#include <linux/fb.h>
#include <linux/init.h>
#include <video/fbcon.h>
/*
* This is just simple sample code.
*
* No warranty that it actually compiles.
* Even less warranty that it actually works :-)
*/
struct xxxfb_info {
/*
* Choose _one_ of the two alternatives:
*
* 1. Use the generic frame buffer operations (fbgen_*).
*/
struct fb_info_gen gen;
/*
* 2. Provide your own frame buffer operations.
*/
struct fb_info info;
/* Here starts the frame buffer device dependent part */
/* You can use this to store e.g. the board number if you support */
/* multiple boards */
};
struct xxxfb_par {
/*
* The hardware specific data in this structure uniquely defines a video
* mode.
*
* If your hardware supports only one video mode, you can leave it empty.
*/
};
/*
* If your driver supports multiple boards, you should make these arrays,
* or allocate them dynamically (using kmalloc()).
*/
static struct xxxfb_info fb_info;
static struct xxxfb_par current_par;
static int current_par_valid = 0;
static struct display disp;
static struct fb_var_screeninfo default_var;
static int currcon = 0;
static int inverse = 0;
int xxxfb_init(void);
int xxxfb_setup(char*);
/* ------------------- chipset specific functions -------------------------- */
static void xxx_detect(void)
{
/*
* This function should detect the current video mode settings and store
* it as the default video mode
*/
struct xxxfb_par par;
/* ... */
xxx_get_par(&par);
xxx_encode_var(&default_var, &par);
}
static int xxx_encode_fix(struct fb_fix_screeninfo *fix, struct xxxfb_par *par,
const struct fb_info *info)
{
/*
* This function should fill in the 'fix' structure based on the values
* in the `par' structure.
*/
/* ... */
return 0;
}
static int xxx_decode_var(struct fb_var_screeninfo *var, struct xxxfb_par *par,
const struct fb_info *info)
{
/*
* Get the video params out of 'var'. If a value doesn't fit, round it up,
* if it's too big, return -EINVAL.
*
* Suggestion: Round up in the following order: bits_per_pixel, xres,
* yres, xres_virtual, yres_virtual, xoffset, yoffset, grayscale,
* bitfields, horizontal timing, vertical timing.
*/
/* ... */
/* pixclock in picos, htotal in pixels, vtotal in scanlines */
if (!fbmon_valid_timings(pixclock, htotal, vtotal, info))
return -EINVAL;
return 0;
}
static int xxx_encode_var(struct fb_var_screeninfo *var, struct xxxfb_par *par,
const struct fb_info *info)
{
/*
* Fill the 'var' structure based on the values in 'par' and maybe other
* values read out of the hardware.
*/
/* ... */
return 0;
}
static void xxx_get_par(struct xxxfb_par *par, const struct fb_info *info)
{
/*
* Fill the hardware's 'par' structure.
*/
if (current_par_valid)
*par = current_par;
else {
/* ... */
}
}
static void xxx_set_par(struct xxxfb_par *par, const struct fb_info *info)
{
/*
* Set the hardware according to 'par'.
*/
current_par = *par;
current_par_valid = 1;
/* ... */
}
static int xxx_getcolreg(unsigned regno, unsigned *red, unsigned *green,
unsigned *blue, unsigned *transp,
const struct fb_info *info)
{
/*
* Read a single color register and split it into colors/transparent.
* The return values must have a 16 bit magnitude.
* Return != 0 for invalid regno.
*/
/* ... */
return 0;
}
static int xxx_setcolreg(unsigned regno, unsigned red, unsigned green,
unsigned blue, unsigned transp,
const struct fb_info *info)
{
/*
* Set a single color register. The values supplied have a 16 bit
* magnitude.
* Return != 0 for invalid regno.
*/
if (regno < 16) {
/*
* Make the first 16 colors of the palette available to fbcon
*/
if (is_cfb15) /* RGB 555 */
...fbcon_cmap.cfb16[regno] = ((red & 0xf800) >> 1) |
((green & 0xf800) >> 6) |
((blue & 0xf800) >> 11);
if (is_cfb16) /* RGB 565 */
...fbcon_cmap.cfb16[regno] = (red & 0xf800) |
((green & 0xfc00) >> 5) |
((blue & 0xf800) >> 11);
if (is_cfb24) /* RGB 888 */
...fbcon_cmap.cfb24[regno] = ((red & 0xff00) << 8) |
(green & 0xff00) |
((blue & 0xff00) >> 8);
if (is_cfb32) /* RGBA 8888 */
...fbcon_cmap.cfb32[regno] = ((red & 0xff00) << 16) |
((green & 0xff00) << 8) |
(blue & 0xff00) |
((transp & 0xff00) >> 8);
}
/* ... */
return 0;
}
static int xxx_pan_display(struct fb_var_screeninfo *var,
struct xxxfb_par *par, const struct fb_info *info)
{
/*
* Pan (or wrap, depending on the `vmode' field) the display using the
* `xoffset' and `yoffset' fields of the `var' structure.
* If the values don't fit, return -EINVAL.
*/
/* ... */
return 0;
}
static int xxx_blank(int blank_mode, const struct fb_info *info)
{
/*
* Blank the screen if blank_mode != 0, else unblank. If blank == NULL
* then the caller blanks by setting the CLUT (Color Look Up Table) to all
* black. Return 0 if blanking succeeded, != 0 if un-/blanking failed due
* to e.g. a video mode which doesn't support it. Implements VESA suspend
* and powerdown modes on hardware that supports disabling hsync/vsync:
* blank_mode == 2: suspend vsync
* blank_mode == 3: suspend hsync
* blank_mode == 4: powerdown
*/
/* ... */
return 0;
}
static void xxx_set_disp(const void *par, struct display *disp,
struct fb_info_gen *info)
{
/*
* Fill in a pointer with the virtual address of the mapped frame buffer.
* Fill in a pointer to appropriate low level text console operations (and
* optionally a pointer to help data) for the video mode `par' of your
* video hardware. These can be generic software routines, or hardware
* accelerated routines specifically tailored for your hardware.
* If you don't have any appropriate operations, you must fill in a
* pointer to dummy operations, and there will be no text output.
*/
disp->screen_base = virtual_frame_buffer_address;
#ifdef FBCON_HAS_CFB8
if (is_cfb8) {
disp->dispsw = fbcon_cfb8;
} else
#endif
#ifdef FBCON_HAS_CFB16
if (is_cfb16) {
disp->dispsw = fbcon_cfb16;
disp->dispsw_data = ...fbcon_cmap.cfb16; /* console palette */
} else
#endif
#ifdef FBCON_HAS_CFB24
if (is_cfb24) {
disp->dispsw = fbcon_cfb24;
disp->dispsw_data = ...fbcon_cmap.cfb24; /* console palette */
} else
#endif
#ifdef FBCON_HAS_CFB32
if (is_cfb32) {
disp->dispsw = fbcon_cfb32;
disp->dispsw_data = ...fbcon_cmap.cfb32; /* console palette */
} else
#endif
disp->dispsw = &fbcon_dummy;
}
/* ------------ Interfaces to hardware functions ------------ */
struct fbgen_hwswitch xxx_switch = {
xxx_detect, xxx_encode_fix, xxx_decode_var, xxx_encode_var, xxx_get_par,
xxx_set_par, xxx_getcolreg, xxx_setcolreg, xxx_pan_display, xxx_blank,
xxx_set_disp
};
/* ------------ Hardware Independent Functions ------------ */
/*
* Initialization
*/
int __init xxxfb_init(void)
{
fb_info.gen.fbhw = &xxx_switch;
fb_info.gen.fbhw->detect();
strcpy(fb_info.gen.info.modename, "XXX");
fb_info.gen.info.changevar = NULL;
fb_info.gen.info.node = -1;
fb_info.gen.info.fbops = &xxxfb_ops;
fb_info.gen.info.disp = &disp;
fb_info.gen.info.switch_con = &xxxfb_switch;
fb_info.gen.info.updatevar = &xxxfb_update_var;
fb_info.gen.info.blank = &xxxfb_blank;
fb_info.gen.info.flags = FBINFO_FLAG_DEFAULT;
/* This should give a reasonable default video mode */
fbgen_get_var(&disp.var, -1, &fb_info.gen.info);
fbgen_do_set_var(&disp.var, 1, &fb_info.gen);
fbgen_set_disp(-1, &fb_info.gen);
fbgen_install_cmap(0, &fb_info.gen);
if (register_framebuffer(&fb_info.gen.info) < 0)
return -EINVAL;
printk(KERN_INFO "fb%d: %s frame buffer device\n", GET_FB_IDX(fb_info.gen.info.node),
fb_info.gen.info.modename);
/* uncomment this if your driver cannot be unloaded */
/* MOD_INC_USE_COUNT; */
return 0;
}
/*
* Cleanup
*/
void xxxfb_cleanup(struct fb_info *info)
{
/*
* If your driver supports multiple boards, you should unregister and
* clean up all instances.
*/
unregister_framebuffer(info);
/* ... */
}
/*
* Setup
*/
int __init xxxfb_setup(char *options)
{
/* Parse user speficied options (`video=xxxfb:') */
}
/* ------------------------------------------------------------------------- */
/*
* Frame buffer operations
*/
/* If all you need is that - just don't define ->fb_open */
static int xxxfb_open(const struct fb_info *info, int user)
{
return 0;
}
/* If all you need is that - just don't define ->fb_release */
static int xxxfb_release(const struct fb_info *info, int user)
{
return 0;
}
/*
* In most cases the `generic' routines (fbgen_*) should be satisfactory.
* However, you're free to fill in your own replacements.
*/
static struct fb_ops xxxfb_ops = {
owner: THIS_MODULE,
fb_open: xxxfb_open, /* only if you need it to do something */
fb_release: xxxfb_release, /* only if you need it to do something */
fb_get_fix: fbgen_get_fix,
fb_get_var: fbgen_get_var,
fb_set_var: fbgen_set_var,
fb_get_cmap: fbgen_get_cmap,
fb_set_cmap: fbgen_set_cmap,
fb_pan_display: fbgen_pan_display,
fb_ioctl: xxxfb_ioctl, /* optional */
};
/* ------------------------------------------------------------------------- */
/*
* Modularization
*/
#ifdef MODULE
MODULE_LICENSE("GPL");
int init_module(void)
{
return xxxfb_init();
}
void cleanup_module(void)
{
xxxfb_cleanup(void);
}
#endif /* MODULE */
|