Viewing file: mach64_accel.c (9.89 KB) -rw-r--r-- Select action/file-type: (+) | (+) | (+) | Code (+) | Session (+) | (+) | SDB (+) | (+) | (+) | (+) | (+) | (+) |
/* * ATI Mach64 Hardware Acceleration */
#include <linux/delay.h> #include <linux/fb.h>
#include <video/fbcon.h> #include <video/fbcon-cfb8.h> #include <video/fbcon-cfb16.h> #include <video/fbcon-cfb24.h> #include <video/fbcon-cfb32.h>
#include "mach64.h" #include "atyfb.h"
/* * Text console acceleration */
static void fbcon_aty_bmove(struct display *p, int sy, int sx, int dy, int dx, int height, int width); static void fbcon_aty_clear(struct vc_data *conp, struct display *p, int sy, int sx, int height, int width);
/* * Generic Mach64 routines */
void aty_reset_engine(const struct fb_info_aty *info) { /* reset engine */ aty_st_le32(GEN_TEST_CNTL, aty_ld_le32(GEN_TEST_CNTL, info) & ~GUI_ENGINE_ENABLE, info); /* enable engine */ aty_st_le32(GEN_TEST_CNTL, aty_ld_le32(GEN_TEST_CNTL, info) | GUI_ENGINE_ENABLE, info); /* ensure engine is not locked up by clearing any FIFO or */ /* HOST errors */ aty_st_le32(BUS_CNTL, aty_ld_le32(BUS_CNTL, info) | BUS_HOST_ERR_ACK | BUS_FIFO_ERR_ACK, info); }
static void reset_GTC_3D_engine(const struct fb_info_aty *info) { aty_st_le32(SCALE_3D_CNTL, 0xc0, info); mdelay(GTC_3D_RESET_DELAY); aty_st_le32(SETUP_CNTL, 0x00, info); mdelay(GTC_3D_RESET_DELAY); aty_st_le32(SCALE_3D_CNTL, 0x00, info); mdelay(GTC_3D_RESET_DELAY); }
void aty_init_engine(const struct atyfb_par *par, struct fb_info_aty *info) { u32 pitch_value;
/* determine modal information from global mode structure */ pitch_value = par->crtc.vxres;
if (par->crtc.bpp == 24) { /* In 24 bpp, the engine is in 8 bpp - this requires that all */ /* horizontal coordinates and widths must be adjusted */ pitch_value = pitch_value * 3; }
/* On GTC (RagePro), we need to reset the 3D engine before */ if (M64_HAS(RESET_3D)) reset_GTC_3D_engine(info);
/* Reset engine, enable, and clear any engine errors */ aty_reset_engine(info); /* Ensure that vga page pointers are set to zero - the upper */ /* page pointers are set to 1 to handle overflows in the */ /* lower page */ aty_st_le32(MEM_VGA_WP_SEL, 0x00010000, info); aty_st_le32(MEM_VGA_RP_SEL, 0x00010000, info);
/* ---- Setup standard engine context ---- */
/* All GUI registers here are FIFOed - therefore, wait for */ /* the appropriate number of empty FIFO entries */ wait_for_fifo(14, info);
/* enable all registers to be loaded for context loads */ aty_st_le32(CONTEXT_MASK, 0xFFFFFFFF, info);
/* set destination pitch to modal pitch, set offset to zero */ aty_st_le32(DST_OFF_PITCH, (pitch_value / 8) << 22, info);
/* zero these registers (set them to a known state) */ aty_st_le32(DST_Y_X, 0, info); aty_st_le32(DST_HEIGHT, 0, info); aty_st_le32(DST_BRES_ERR, 0, info); aty_st_le32(DST_BRES_INC, 0, info); aty_st_le32(DST_BRES_DEC, 0, info);
/* set destination drawing attributes */ aty_st_le32(DST_CNTL, DST_LAST_PEL | DST_Y_TOP_TO_BOTTOM | DST_X_LEFT_TO_RIGHT, info);
/* set source pitch to modal pitch, set offset to zero */ aty_st_le32(SRC_OFF_PITCH, (pitch_value / 8) << 22, info);
/* set these registers to a known state */ aty_st_le32(SRC_Y_X, 0, info); aty_st_le32(SRC_HEIGHT1_WIDTH1, 1, info); aty_st_le32(SRC_Y_X_START, 0, info); aty_st_le32(SRC_HEIGHT2_WIDTH2, 1, info);
/* set source pixel retrieving attributes */ aty_st_le32(SRC_CNTL, SRC_LINE_X_LEFT_TO_RIGHT, info);
/* set host attributes */ wait_for_fifo(13, info); aty_st_le32(HOST_CNTL, 0, info);
/* set pattern attributes */ aty_st_le32(PAT_REG0, 0, info); aty_st_le32(PAT_REG1, 0, info); aty_st_le32(PAT_CNTL, 0, info);
/* set scissors to modal size */ aty_st_le32(SC_LEFT, 0, info); aty_st_le32(SC_TOP, 0, info); aty_st_le32(SC_BOTTOM, par->crtc.vyres-1, info); aty_st_le32(SC_RIGHT, pitch_value-1, info);
/* set background color to minimum value (usually BLACK) */ aty_st_le32(DP_BKGD_CLR, 0, info);
/* set foreground color to maximum value (usually WHITE) */ aty_st_le32(DP_FRGD_CLR, 0xFFFFFFFF, info);
/* set write mask to effect all pixel bits */ aty_st_le32(DP_WRITE_MASK, 0xFFFFFFFF, info);
/* set foreground mix to overpaint and background mix to */ /* no-effect */ aty_st_le32(DP_MIX, FRGD_MIX_S | BKGD_MIX_D, info);
/* set primary source pixel channel to foreground color */ /* register */ aty_st_le32(DP_SRC, FRGD_SRC_FRGD_CLR, info);
/* set compare functionality to false (no-effect on */ /* destination) */ wait_for_fifo(3, info); aty_st_le32(CLR_CMP_CLR, 0, info); aty_st_le32(CLR_CMP_MASK, 0xFFFFFFFF, info); aty_st_le32(CLR_CMP_CNTL, 0, info);
/* set pixel depth */ wait_for_fifo(2, info); aty_st_le32(DP_PIX_WIDTH, par->crtc.dp_pix_width, info); aty_st_le32(DP_CHAIN_MASK, par->crtc.dp_chain_mask, info);
wait_for_fifo(5, info); aty_st_le32(SCALE_3D_CNTL, 0, info); aty_st_le32(Z_CNTL, 0, info); aty_st_le32(CRTC_INT_CNTL, aty_ld_le32(CRTC_INT_CNTL, info) & ~0x20, info); aty_st_le32(GUI_TRAJ_CNTL, 0x100023, info);
/* insure engine is idle before leaving */ wait_for_idle(info); }
/* * Accelerated functions */
static inline void draw_rect(s16 x, s16 y, u16 width, u16 height, struct fb_info_aty *info) { /* perform rectangle fill */ wait_for_fifo(2, info); aty_st_le32(DST_Y_X, (x << 16) | y, info); aty_st_le32(DST_HEIGHT_WIDTH, (width << 16) | height, info); info->blitter_may_be_busy = 1; }
static inline void aty_rectcopy(int srcx, int srcy, int dstx, int dsty, u_int width, u_int height, struct fb_info_aty *info) { u32 direction = DST_LAST_PEL; u32 pitch_value;
if (!width || !height) return;
pitch_value = info->current_par.crtc.vxres; if (info->current_par.crtc.bpp == 24) { /* In 24 bpp, the engine is in 8 bpp - this requires that all */ /* horizontal coordinates and widths must be adjusted */ pitch_value *= 3; srcx *= 3; dstx *= 3; width *= 3; }
if (srcy < dsty) { dsty += height - 1; srcy += height - 1; } else direction |= DST_Y_TOP_TO_BOTTOM;
if (srcx < dstx) { dstx += width - 1; srcx += width - 1; } else direction |= DST_X_LEFT_TO_RIGHT;
wait_for_fifo(4, info); aty_st_le32(DP_SRC, FRGD_SRC_BLIT, info); aty_st_le32(SRC_Y_X, (srcx << 16) | srcy, info); aty_st_le32(SRC_HEIGHT1_WIDTH1, (width << 16) | height, info); aty_st_le32(DST_CNTL, direction, info); draw_rect(dstx, dsty, width, height, info); }
void aty_rectfill(int dstx, int dsty, u_int width, u_int height, u_int color, struct fb_info_aty *info) { if (!width || !height) return;
if (info->current_par.crtc.bpp == 24) { /* In 24 bpp, the engine is in 8 bpp - this requires that all */ /* horizontal coordinates and widths must be adjusted */ dstx *= 3; width *= 3; }
wait_for_fifo(3, info); aty_st_le32(DP_FRGD_CLR, color, info); aty_st_le32(DP_SRC, BKGD_SRC_BKGD_CLR | FRGD_SRC_FRGD_CLR | MONO_SRC_ONE, info); aty_st_le32(DST_CNTL, DST_LAST_PEL | DST_Y_TOP_TO_BOTTOM | DST_X_LEFT_TO_RIGHT, info); draw_rect(dstx, dsty, width, height, info); }
/* * Text console acceleration */
static void fbcon_aty_bmove(struct display *p, int sy, int sx, int dy, int dx, int height, int width) { #ifdef __sparc__ struct fb_info_aty *fb = (struct fb_info_aty *)(p->fb_info);
if (fb->mmaped && (!fb->fb_info.display_fg || fb->fb_info.display_fg->vc_num == fb->vtconsole)) return; #endif
sx *= fontwidth(p); sy *= fontheight(p); dx *= fontwidth(p); dy *= fontheight(p); width *= fontwidth(p); height *= fontheight(p);
aty_rectcopy(sx, sy, dx, dy, width, height, (struct fb_info_aty *)p->fb_info); }
static void fbcon_aty_clear(struct vc_data *conp, struct display *p, int sy, int sx, int height, int width) { u32 bgx; #ifdef __sparc__ struct fb_info_aty *fb = (struct fb_info_aty *)(p->fb_info);
if (fb->mmaped && (!fb->fb_info.display_fg || fb->fb_info.display_fg->vc_num == fb->vtconsole)) return; #endif
bgx = attr_bgcol_ec(p, conp); bgx |= (bgx << 8); bgx |= (bgx << 16);
sx *= fontwidth(p); sy *= fontheight(p); width *= fontwidth(p); height *= fontheight(p);
aty_rectfill(sx, sy, width, height, bgx, (struct fb_info_aty *)p->fb_info); }
#ifdef __sparc__ #define check_access \ if (fb->mmaped && (!fb->fb_info.display_fg \ || fb->fb_info.display_fg->vc_num == fb->vtconsole)) \ return; #else #define check_access do { } while (0) #endif
#define DEF_FBCON_ATY_OP(name, call, args...) \ static void name(struct vc_data *conp, struct display *p, args) \ { \ struct fb_info_aty *fb = (struct fb_info_aty *)(p->fb_info); \ check_access; \ if (fb->blitter_may_be_busy) \ wait_for_idle((struct fb_info_aty *)p->fb_info); \ call; \ }
#define DEF_FBCON_ATY(width) \ DEF_FBCON_ATY_OP(fbcon_aty##width##_putc, \ fbcon_cfb##width##_putc(conp, p, c, yy, xx), \ int c, int yy, int xx) \ DEF_FBCON_ATY_OP(fbcon_aty##width##_putcs, \ fbcon_cfb##width##_putcs(conp, p, s, count, yy, xx), \ const unsigned short *s, int count, int yy, int xx) \ DEF_FBCON_ATY_OP(fbcon_aty##width##_clear_margins, \ fbcon_cfb##width##_clear_margins(conp, p, bottom_only), \ int bottom_only) \ \ const struct display_switch fbcon_aty##width = { \ setup: fbcon_cfb##width##_setup, \ bmove: fbcon_aty_bmove, \ clear: fbcon_aty_clear, \ putc: fbcon_aty##width##_putc, \ putcs: fbcon_aty##width##_putcs, \ revc: fbcon_cfb##width##_revc, \ clear_margins: fbcon_aty##width##_clear_margins, \ fontwidthmask: FONTWIDTH(4)|FONTWIDTH(8)|FONTWIDTH(12)|FONTWIDTH(16) \ };
#ifdef FBCON_HAS_CFB8 DEF_FBCON_ATY(8) #endif #ifdef FBCON_HAS_CFB16 DEF_FBCON_ATY(16) #endif #ifdef FBCON_HAS_CFB24 DEF_FBCON_ATY(24) #endif #ifdef FBCON_HAS_CFB32 DEF_FBCON_ATY(32) #endif
|