Viewing file:  devices.c (16.64 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* devices.c
* (C) Copyright 1999 Randy Dunlap.
* (C) Copyright 1999,2000 Thomas Sailer <sailer@ife.ee.ethz.ch>. (proc file per device)
* (C) Copyright 1999 Deti Fliegl (new USB architecture)
*
* $id$
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
*************************************************************
*
* <mountpoint>/devices contains USB topology, device, config, class,
* interface, & endpoint data.
*
* I considered using /proc/bus/usb/devices/device# for each device
* as it is attached or detached, but I didn't like this for some
* reason -- maybe it's just too deep of a directory structure.
* I also don't like looking in multiple places to gather and view
* the data. Having only one file for ./devices also prevents race
* conditions that could arise if a program was reading device info
* for devices that are being removed (unplugged). (That is, the
* program may find a directory for devnum_12 then try to open it,
* but it was just unplugged, so the directory is now deleted.
* But programs would just have to be prepared for situations like
* this in any plug-and-play environment.)
*
* 1999-12-16: Thomas Sailer <sailer@ife.ee.ethz.ch>
* Converted the whole proc stuff to real
* read methods. Now not the whole device list needs to fit
* into one page, only the device list for one bus.
* Added a poll method to /proc/bus/usb/devices, to wake
* up an eventual usbd
* 2000-01-04: Thomas Sailer <sailer@ife.ee.ethz.ch>
* Turned into its own filesystem
* 2000-07-05: Ashley Montanaro <ashley@compsoc.man.ac.uk>
* Converted file reading routine to dump to buffer once
* per device, not per bus
*
* $Id: devices.c,v 1.5 2000/01/11 13:58:21 tom Exp $
*/
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/usb.h>
#include <linux/smp_lock.h>
#include <linux/usbdevice_fs.h>
#include <asm/uaccess.h>
#define MAX_TOPO_LEVEL 6
/* Define ALLOW_SERIAL_NUMBER if you want to see the serial number of devices */
#define ALLOW_SERIAL_NUMBER
static char *format_topo =
/* T: Bus=dd Lev=dd Prnt=dd Port=dd Cnt=dd Dev#=ddd Spd=ddd MxCh=dd */
"T: Bus=%2.2d Lev=%2.2d Prnt=%2.2d Port=%2.2d Cnt=%2.2d Dev#=%3d Spd=%3s MxCh=%2d\n";
static char *format_string_manufacturer =
/* S: Manufacturer=xxxx */
"S: Manufacturer=%.100s\n";
static char *format_string_product =
/* S: Product=xxxx */
"S: Product=%.100s\n";
#ifdef ALLOW_SERIAL_NUMBER
static char *format_string_serialnumber =
/* S: SerialNumber=xxxx */
"S: SerialNumber=%.100s\n";
#endif
static char *format_bandwidth =
/* B: Alloc=ddd/ddd us (xx%), #Int=ddd, #Iso=ddd */
"B: Alloc=%3d/%3d us (%2d%%), #Int=%3d, #Iso=%3d\n";
static char *format_device1 =
/* D: Ver=xx.xx Cls=xx(sssss) Sub=xx Prot=xx MxPS=dd #Cfgs=dd */
"D: Ver=%2x.%02x Cls=%02x(%-5s) Sub=%02x Prot=%02x MxPS=%2d #Cfgs=%3d\n";
static char *format_device2 =
/* P: Vendor=xxxx ProdID=xxxx Rev=xx.xx */
"P: Vendor=%04x ProdID=%04x Rev=%2x.%02x\n";
static char *format_config =
/* C: #Ifs=dd Cfg#=dd Atr=xx MPwr=dddmA */
"C:%c #Ifs=%2d Cfg#=%2d Atr=%02x MxPwr=%3dmA\n";
static char *format_iface =
/* I: If#=dd Alt=dd #EPs=dd Cls=xx(sssss) Sub=xx Prot=xx Driver=xxxx*/
"I: If#=%2d Alt=%2d #EPs=%2d Cls=%02x(%-5s) Sub=%02x Prot=%02x Driver=%s\n";
static char *format_endpt =
/* E: Ad=xx(s) Atr=xx(ssss) MxPS=dddd Ivl=dddms */
"E: Ad=%02x(%c) Atr=%02x(%-4s) MxPS=%4d Ivl=%3dms\n";
/*
* Need access to the driver and USB bus lists.
* extern struct list_head usb_driver_list;
* extern struct list_head usb_bus_list;
* However, these will come from functions that return ptrs to each of them.
*/
static DECLARE_WAIT_QUEUE_HEAD(deviceconndiscwq);
static unsigned int conndiscevcnt = 0;
/* this struct stores the poll state for <mountpoint>/devices pollers */
struct usb_device_status {
unsigned int lastev;
};
struct class_info {
int class;
char *class_name;
};
static const struct class_info clas_info[] =
{ /* max. 5 chars. per name string */
{USB_CLASS_PER_INTERFACE, ">ifc"},
{USB_CLASS_AUDIO, "audio"},
{USB_CLASS_COMM, "comm."},
{USB_CLASS_HID, "HID"},
{USB_CLASS_HUB, "hub"},
{USB_CLASS_PHYSICAL, "PID"},
{USB_CLASS_PRINTER, "print"},
{USB_CLASS_MASS_STORAGE, "stor."},
{USB_CLASS_CDC_DATA, "data"},
{USB_CLASS_APP_SPEC, "app."},
{USB_CLASS_VENDOR_SPEC, "vend."},
{USB_CLASS_STILL_IMAGE, "still"},
{USB_CLASS_CSCID, "scard"},
{USB_CLASS_CONTENT_SEC, "c-sec"},
{-1, "unk."} /* leave as last */
};
/*****************************************************************/
void usbdevfs_conn_disc_event(void)
{
wake_up(&deviceconndiscwq);
conndiscevcnt++;
}
static const char *class_decode(const int class)
{
int ix;
for (ix = 0; clas_info[ix].class != -1; ix++)
if (clas_info[ix].class == class)
break;
return (clas_info[ix].class_name);
}
static char *usb_dump_endpoint_descriptor(char *start, char *end, const struct usb_endpoint_descriptor *desc)
{
char *EndpointType [4] = {"Ctrl", "Isoc", "Bulk", "Int."};
if (start > end)
return start;
start += sprintf(start, format_endpt, desc->bEndpointAddress,
(desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) == USB_ENDPOINT_XFER_CONTROL
? 'B' : /* bidirectional */
(desc->bEndpointAddress & USB_DIR_IN) ? 'I' : 'O',
desc->bmAttributes, EndpointType[desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK],
desc->wMaxPacketSize, desc->bInterval);
return start;
}
static char *usb_dump_endpoint(char *start, char *end, const struct usb_endpoint_descriptor *endpoint)
{
return usb_dump_endpoint_descriptor(start, end, endpoint);
}
static char *usb_dump_interface_descriptor(char *start, char *end, const struct usb_interface *iface, int setno)
{
struct usb_interface_descriptor *desc = &iface->altsetting[setno];
if (start > end)
return start;
start += sprintf(start, format_iface,
desc->bInterfaceNumber,
desc->bAlternateSetting,
desc->bNumEndpoints,
desc->bInterfaceClass,
class_decode(desc->bInterfaceClass),
desc->bInterfaceSubClass,
desc->bInterfaceProtocol,
iface->driver ? iface->driver->name : "(none)");
return start;
}
static char *usb_dump_interface(char *start, char *end, const struct usb_interface *iface, int setno)
{
struct usb_interface_descriptor *desc = &iface->altsetting[setno];
int i;
start = usb_dump_interface_descriptor(start, end, iface, setno);
for (i = 0; i < desc->bNumEndpoints; i++) {
if (start > end)
return start;
start = usb_dump_endpoint(start, end, desc->endpoint + i);
}
return start;
}
/* TBD:
* 0. TBDs
* 1. marking active config and ifaces (code lists all, but should mark
* which ones are active, if any)
* 2. add <halted> status to each endpoint line
*/
static char *usb_dump_config_descriptor(char *start, char *end, const struct usb_config_descriptor *desc, int active)
{
if (start > end)
return start;
start += sprintf(start, format_config,
active ? '*' : ' ', /* mark active/actual/current cfg. */
desc->bNumInterfaces,
desc->bConfigurationValue,
desc->bmAttributes,
desc->MaxPower * 2);
return start;
}
static char *usb_dump_config(char *start, char *end, const struct usb_config_descriptor *config, int active)
{
int i, j;
struct usb_interface *interface;
if (start > end)
return start;
if (!config) /* getting these some in 2.3.7; none in 2.3.6 */
return start + sprintf(start, "(null Cfg. desc.)\n");
start = usb_dump_config_descriptor(start, end, config, active);
for (i = 0; i < config->bNumInterfaces; i++) {
interface = config->interface + i;
if (!interface)
break;
for (j = 0; j < interface->num_altsetting; j++) {
if (start > end)
return start;
start = usb_dump_interface(start, end, interface, j);
}
}
return start;
}
/*
* Dump the different USB descriptors.
*/
static char *usb_dump_device_descriptor(char *start, char *end, const struct usb_device_descriptor *desc)
{
if (start > end)
return start;
start += sprintf (start, format_device1,
desc->bcdUSB >> 8, desc->bcdUSB & 0xff,
desc->bDeviceClass,
class_decode (desc->bDeviceClass),
desc->bDeviceSubClass,
desc->bDeviceProtocol,
desc->bMaxPacketSize0,
desc->bNumConfigurations);
if (start > end)
return start;
start += sprintf(start, format_device2,
desc->idVendor, desc->idProduct,
desc->bcdDevice >> 8, desc->bcdDevice & 0xff);
return start;
}
/*
* Dump the different strings that this device holds.
*/
static char *usb_dump_device_strings (char *start, char *end, struct usb_device *dev)
{
char *buf;
if (start > end)
return start;
buf = kmalloc(128, GFP_KERNEL);
if (!buf)
return start;
if (dev->descriptor.iManufacturer) {
if (usb_string(dev, dev->descriptor.iManufacturer, buf, 128) > 0)
start += sprintf(start, format_string_manufacturer, buf);
}
if (start > end)
goto out;
if (dev->descriptor.iProduct) {
if (usb_string(dev, dev->descriptor.iProduct, buf, 128) > 0)
start += sprintf(start, format_string_product, buf);
}
if (start > end)
goto out;
#ifdef ALLOW_SERIAL_NUMBER
if (dev->descriptor.iSerialNumber) {
if (usb_string(dev, dev->descriptor.iSerialNumber, buf, 128) > 0)
start += sprintf(start, format_string_serialnumber, buf);
}
#endif
out:
kfree(buf);
return start;
}
static char *usb_dump_desc(char *start, char *end, struct usb_device *dev)
{
int i;
if (start > end)
return start;
start = usb_dump_device_descriptor(start, end, &dev->descriptor);
if (start > end)
return start;
start = usb_dump_device_strings (start, end, dev);
for (i = 0; i < dev->descriptor.bNumConfigurations; i++) {
if (start > end)
return start;
start = usb_dump_config(start, end, dev->config + i,
(dev->config + i) == dev->actconfig); /* active ? */
}
return start;
}
#ifdef PROC_EXTRA /* TBD: may want to add this code later */
static char *usb_dump_hub_descriptor(char *start, char *end, const struct usb_hub_descriptor * desc)
{
int leng = USB_DT_HUB_NONVAR_SIZE;
unsigned char *ptr = (unsigned char *)desc;
if (start > end)
return start;
start += sprintf(start, "Interface:");
while (leng && start <= end) {
start += sprintf(start, " %02x", *ptr);
ptr++; leng--;
}
*start++ = '\n';
return start;
}
static char *usb_dump_string(char *start, char *end, const struct usb_device *dev, char *id, int index)
{
if (start > end)
return start;
start += sprintf(start, "Interface:");
if (index <= dev->maxstring && dev->stringindex && dev->stringindex[index])
start += sprintf(start, "%s: %.100s ", id, dev->stringindex[index]);
return start;
}
#endif /* PROC_EXTRA */
/*****************************************************************/
/* This is a recursive function. Parameters:
* buffer - the user-space buffer to write data into
* nbytes - the maximum number of bytes to write
* skip_bytes - the number of bytes to skip before writing anything
* file_offset - the offset into the devices file on completion
*/
static ssize_t usb_device_dump(char **buffer, size_t *nbytes, loff_t *skip_bytes, loff_t *file_offset,
struct usb_device *usbdev, struct usb_bus *bus, int level, int index, int count)
{
int chix;
int ret, cnt = 0;
int parent_devnum = 0;
char *pages_start, *data_end, *speed;
unsigned int length;
ssize_t total_written = 0;
/* don't bother with anything else if we're not writing any data */
if (*nbytes <= 0)
return 0;
if (level > MAX_TOPO_LEVEL)
return total_written;
/* allocate 2^1 pages = 8K (on i386); should be more than enough for one device */
if (!(pages_start = (char*) __get_free_pages(GFP_KERNEL,1)))
return -ENOMEM;
if (usbdev->parent && usbdev->parent->devnum != -1)
parent_devnum = usbdev->parent->devnum;
/*
* So the root hub's parent is 0 and any device that is
* plugged into the root hub has a parent of 0.
*/
switch (usbdev->speed) {
case USB_SPEED_LOW:
speed = "1.5"; break;
case USB_SPEED_UNKNOWN: /* usb 1.1 root hub code */
case USB_SPEED_FULL:
speed = "12 "; break;
case USB_SPEED_HIGH:
speed = "480"; break;
default:
speed = "?? ";
}
data_end = pages_start + sprintf(pages_start, format_topo,
bus->busnum, level, parent_devnum,
index, count, usbdev->devnum,
speed, usbdev->maxchild);
/*
* level = topology-tier level;
* parent_devnum = parent device number;
* index = parent's connector number;
* count = device count at this level
*/
/* If this is the root hub, display the bandwidth information */
if (level == 0)
data_end += sprintf(data_end, format_bandwidth, bus->bandwidth_allocated,
FRAME_TIME_MAX_USECS_ALLOC,
(100 * bus->bandwidth_allocated + FRAME_TIME_MAX_USECS_ALLOC / 2) / FRAME_TIME_MAX_USECS_ALLOC,
bus->bandwidth_int_reqs, bus->bandwidth_isoc_reqs);
data_end = usb_dump_desc(data_end, pages_start + (2 * PAGE_SIZE) - 256, usbdev);
if (data_end > (pages_start + (2 * PAGE_SIZE) - 256))
data_end += sprintf(data_end, "(truncated)\n");
length = data_end - pages_start;
/* if we can start copying some data to the user */
if (length > *skip_bytes) {
length -= *skip_bytes;
if (length > *nbytes)
length = *nbytes;
if (copy_to_user(*buffer, pages_start + *skip_bytes, length)) {
free_pages((unsigned long)pages_start, 1);
if (total_written == 0)
return -EFAULT;
return total_written;
}
*nbytes -= length;
*file_offset += length;
total_written += length;
*buffer += length;
*skip_bytes = 0;
} else
*skip_bytes -= length;
free_pages((unsigned long)pages_start, 1);
/* Now look at all of this device's children. */
for (chix = 0; chix < usbdev->maxchild; chix++) {
if (usbdev->children[chix]) {
ret = usb_device_dump(buffer, nbytes, skip_bytes, file_offset, usbdev->children[chix],
bus, level + 1, chix, ++cnt);
if (ret == -EFAULT)
return total_written;
total_written += ret;
}
}
return total_written;
}
static ssize_t usb_device_read(struct file *file, char *buf, size_t nbytes, loff_t *ppos)
{
struct list_head *buslist;
struct usb_bus *bus;
ssize_t ret, total_written = 0;
loff_t skip_bytes = *ppos;
if (*ppos < 0)
return -EINVAL;
if (nbytes <= 0)
return 0;
if (!access_ok(VERIFY_WRITE, buf, nbytes))
return -EFAULT;
/* enumerate busses */
down (&usb_bus_list_lock);
for (buslist = usb_bus_list.next; buslist != &usb_bus_list; buslist = buslist->next) {
/* print devices for this bus */
bus = list_entry(buslist, struct usb_bus, bus_list);
/* recurse through all children of the root hub */
ret = usb_device_dump(&buf, &nbytes, &skip_bytes, ppos, bus->root_hub, bus, 0, 0, 0);
if (ret < 0)
return ret;
total_written += ret;
}
up (&usb_bus_list_lock);
return total_written;
}
/* Kernel lock for "lastev" protection */
static unsigned int usb_device_poll(struct file *file, struct poll_table_struct *wait)
{
struct usb_device_status *st = (struct usb_device_status *)file->private_data;
unsigned int mask = 0;
lock_kernel();
if (!st) {
st = kmalloc(sizeof(struct usb_device_status), GFP_KERNEL);
if (!st) {
unlock_kernel();
return POLLIN;
}
/*
* need to prevent the module from being unloaded, since
* proc_unregister does not call the release method and
* we would have a memory leak
*/
st->lastev = conndiscevcnt;
file->private_data = st;
mask = POLLIN;
}
if (file->f_mode & FMODE_READ)
poll_wait(file, &deviceconndiscwq, wait);
if (st->lastev != conndiscevcnt)
mask |= POLLIN;
st->lastev = conndiscevcnt;
unlock_kernel();
return mask;
}
static int usb_device_open(struct inode *inode, struct file *file)
{
file->private_data = NULL;
return 0;
}
static int usb_device_release(struct inode *inode, struct file *file)
{
if (file->private_data) {
kfree(file->private_data);
file->private_data = NULL;
}
return 0;
}
static loff_t usb_device_lseek(struct file * file, loff_t offset, int orig)
{
switch (orig) {
case 0:
file->f_pos = offset;
return file->f_pos;
case 1:
file->f_pos += offset;
return file->f_pos;
case 2:
return -EINVAL;
default:
return -EINVAL;
}
}
struct file_operations usbdevfs_devices_fops = {
llseek: usb_device_lseek,
read: usb_device_read,
poll: usb_device_poll,
open: usb_device_open,
release: usb_device_release,
};
|