Viewing file:  transport.h (5.17 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* Driver for USB Mass Storage compliant devices
* Transport Functions Header File
*
* $Id: transport.h,v 1.15 2001/03/17 20:06:23 jrmayfield Exp $
*
* Current development and maintenance by:
* (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
*
* This driver is based on the 'USB Mass Storage Class' document. This
* describes in detail the protocol used to communicate with such
* devices. Clearly, the designers had SCSI and ATAPI commands in
* mind when they created this document. The commands are all very
* similar to commands in the SCSI-II and ATAPI specifications.
*
* It is important to note that in a number of cases this class
* exhibits class-specific exemptions from the USB specification.
* Notably the usage of NAK, STALL and ACK differs from the norm, in
* that they are used to communicate wait, failed and OK on commands.
*
* Also, for certain devices, the interrupt endpoint is used to convey
* status of a command.
*
* Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
* information about this driver.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#ifndef _TRANSPORT_H_
#define _TRANSPORT_H_
#include <linux/config.h>
#include <linux/blk.h>
#include "usb.h"
#include "scsi.h"
/* Protocols */
#define US_PR_CBI 0x00 /* Control/Bulk/Interrupt */
#define US_PR_CB 0x01 /* Control/Bulk w/o interrupt */
#define US_PR_BULK 0x50 /* bulk only */
#ifdef CONFIG_USB_STORAGE_HP8200e
#define US_PR_SCM_ATAPI 0x80 /* SCM-ATAPI bridge */
#endif
#ifdef CONFIG_USB_STORAGE_SDDR09
#define US_PR_EUSB_SDDR09 0x81 /* SCM-SCSI bridge for
SDDR-09 */
#endif
#define US_PR_DPCM_USB 0xf0 /* Combination CB/SDDR09 */
#ifdef CONFIG_USB_STORAGE_FREECOM
#define US_PR_FREECOM 0xf1 /* Freecom */
#endif
#ifdef CONFIG_USB_STORAGE_DATAFAB
#define US_PR_DATAFAB 0xf2 /* Datafab chipsets */
#endif
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
#define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */
#endif
/*
* Bulk only data structures
*/
/* command block wrapper */
struct bulk_cb_wrap {
__u32 Signature; /* contains 'USBC' */
__u32 Tag; /* unique per command id */
__u32 DataTransferLength; /* size of data */
__u8 Flags; /* direction in bit 0 */
__u8 Lun; /* LUN normally 0 */
__u8 Length; /* of of the CDB */
__u8 CDB[16]; /* max command */
};
#define US_BULK_CB_WRAP_LEN 31
#define US_BULK_CB_SIGN 0x43425355 /*spells out USBC */
#define US_BULK_FLAG_IN 1
#define US_BULK_FLAG_OUT 0
/* command status wrapper */
struct bulk_cs_wrap {
__u32 Signature; /* should = 'USBS' */
__u32 Tag; /* same as original command */
__u32 Residue; /* amount not transferred */
__u8 Status; /* see below */
__u8 Filler[18];
};
#define US_BULK_CS_WRAP_LEN 13
#define US_BULK_CS_SIGN 0x53425355 /* spells out 'USBS' */
#define US_BULK_STAT_OK 0
#define US_BULK_STAT_FAIL 1
#define US_BULK_STAT_PHASE 2
/* bulk-only class specific requests */
#define US_BULK_RESET_REQUEST 0xff
#define US_BULK_GET_MAX_LUN 0xfe
/*
* us_bulk_transfer() return codes
*/
#define US_BULK_TRANSFER_GOOD 0 /* good transfer */
#define US_BULK_TRANSFER_SHORT 1 /* transfered less than expected */
#define US_BULK_TRANSFER_FAILED 2 /* transfer died in the middle */
#define US_BULK_TRANSFER_ABORTED 3 /* transfer canceled */
/*
* Transport return codes
*/
#define USB_STOR_TRANSPORT_GOOD 0 /* Transport good, command good */
#define USB_STOR_TRANSPORT_FAILED 1 /* Transport good, command failed */
#define USB_STOR_TRANSPORT_ERROR 2 /* Transport bad (i.e. device dead) */
#define USB_STOR_TRANSPORT_ABORTED 3 /* Transport aborted */
/*
* CBI accept device specific command
*/
#define US_CBI_ADSC 0
extern void usb_stor_CBI_irq(struct urb*);
extern int usb_stor_CBI_transport(Scsi_Cmnd*, struct us_data*);
extern int usb_stor_CB_transport(Scsi_Cmnd*, struct us_data*);
extern int usb_stor_CB_reset(struct us_data*);
extern int usb_stor_Bulk_transport(Scsi_Cmnd*, struct us_data*);
extern int usb_stor_Bulk_max_lun(struct us_data*);
extern int usb_stor_Bulk_reset(struct us_data*);
extern unsigned int usb_stor_transfer_length(Scsi_Cmnd*);
extern void usb_stor_invoke_transport(Scsi_Cmnd*, struct us_data*);
extern int usb_stor_transfer_partial(struct us_data*, char*, int);
extern int usb_stor_bulk_msg(struct us_data*, void*, int, unsigned int,
unsigned int*);
extern int usb_stor_control_msg(struct us_data*, unsigned int, u8, u8,
u16, u16, void*, u16);
extern void usb_stor_transfer(Scsi_Cmnd*, struct us_data*);
extern int usb_stor_clear_halt(struct usb_device*, int );
#endif
|