Viewing file:  scsiglue.c (22.78 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* Driver for USB Mass Storage compliant devices
* SCSI layer glue code
*
* $Id: scsiglue.c,v 1.24 2001/11/11 03:33:58 mdharm Exp $
*
* Current development and maintenance by:
* (c) 1999, 2000 Matthew Dharm (mdharm-usb@one-eyed-alien.net)
*
* Developed with the assistance of:
* (c) 2000 David L. Brown, Jr. (usb-storage@davidb.org)
* (c) 2000 Stephen J. Gowdy (SGowdy@lbl.gov)
*
* Initial work by:
* (c) 1999 Michael Gee (michael@linuxspecific.com)
*
* This driver is based on the 'USB Mass Storage Class' document. This
* describes in detail the protocol used to communicate with such
* devices. Clearly, the designers had SCSI and ATAPI commands in
* mind when they created this document. The commands are all very
* similar to commands in the SCSI-II and ATAPI specifications.
*
* It is important to note that in a number of cases this class
* exhibits class-specific exemptions from the USB specification.
* Notably the usage of NAK, STALL and ACK differs from the norm, in
* that they are used to communicate wait, failed and OK on commands.
*
* Also, for certain devices, the interrupt endpoint is used to convey
* status of a command.
*
* Please see http://www.one-eyed-alien.net/~mdharm/linux-usb for more
* information about this driver.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2, or (at your option) any
* later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
* General Public License for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 675 Mass Ave, Cambridge, MA 02139, USA.
*/
#include "scsiglue.h"
#include "usb.h"
#include "debug.h"
#include "transport.h"
#include <linux/slab.h>
/*
* kernel thread actions
*/
#define US_ACT_COMMAND 1
#define US_ACT_DEVICE_RESET 2
#define US_ACT_BUS_RESET 3
#define US_ACT_HOST_RESET 4
#define US_ACT_EXIT 5
/***********************************************************************
* Host functions
***********************************************************************/
static const char* host_info(struct Scsi_Host *host)
{
return "SCSI emulation for USB Mass Storage devices";
}
/* detect a virtual adapter (always works) */
static int detect(struct SHT *sht)
{
struct us_data *us;
char local_name[32];
/* This is not nice at all, but how else are we to get the
* data here? */
us = (struct us_data *)sht->proc_dir;
/* set up the name of our subdirectory under /proc/scsi/ */
sprintf(local_name, "usb-storage-%d", us->host_number);
sht->proc_name = kmalloc (strlen(local_name) + 1, GFP_KERNEL);
if (!sht->proc_name)
return 0;
strcpy(sht->proc_name, local_name);
/* we start with no /proc directory entry */
sht->proc_dir = NULL;
/* register the host */
us->host = scsi_register(sht, sizeof(us));
if (us->host) {
us->host->hostdata[0] = (unsigned long)us;
us->host_no = us->host->host_no;
return 1;
}
/* odd... didn't register properly. Abort and free pointers */
kfree(sht->proc_name);
sht->proc_name = NULL;
return 0;
}
/* Release all resources used by the virtual host
*
* NOTE: There is no contention here, because we're already deregistered
* the driver and we're doing each virtual host in turn, not in parallel
*/
static int release(struct Scsi_Host *psh)
{
struct us_data *us = (struct us_data *)psh->hostdata[0];
US_DEBUGP("release() called for host %s\n", us->htmplt.name);
/* Kill the control threads
*
* Enqueue the command, wake up the thread, and wait for
* notification that it's exited.
*/
US_DEBUGP("-- sending US_ACT_EXIT command to thread\n");
us->action = US_ACT_EXIT;
up(&(us->sema));
wait_for_completion(&(us->notify));
/* remove the pointer to the data structure we were using */
(struct us_data*)psh->hostdata[0] = NULL;
/* we always have a successful release */
return 0;
}
/* run command */
static int command( Scsi_Cmnd *srb )
{
US_DEBUGP("Bad use of us_command\n");
return DID_BAD_TARGET << 16;
}
/* run command */
static int queuecommand( Scsi_Cmnd *srb , void (*done)(Scsi_Cmnd *))
{
struct us_data *us = (struct us_data *)srb->host->hostdata[0];
US_DEBUGP("queuecommand() called\n");
srb->host_scribble = (unsigned char *)us;
/* get exclusive access to the structures we want */
down(&(us->queue_exclusion));
/* enqueue the command */
us->queue_srb = srb;
srb->scsi_done = done;
us->action = US_ACT_COMMAND;
/* release the lock on the structure */
up(&(us->queue_exclusion));
/* wake up the process task */
up(&(us->sema));
return 0;
}
/***********************************************************************
* Error handling functions
***********************************************************************/
/* Command abort */
static int command_abort( Scsi_Cmnd *srb )
{
struct us_data *us = (struct us_data *)srb->host->hostdata[0];
US_DEBUGP("command_abort() called\n");
/* if we're stuck waiting for an IRQ, simulate it */
if (atomic_read(us->ip_wanted)) {
US_DEBUGP("-- simulating missing IRQ\n");
up(&(us->ip_waitq));
}
/* if the device has been removed, this worked */
if (!us->pusb_dev) {
US_DEBUGP("-- device removed already\n");
return SUCCESS;
}
/* if we have an urb pending, let's wake the control thread up */
if (us->current_urb->status == -EINPROGRESS) {
/* cancel the URB -- this will automatically wake the thread */
usb_unlink_urb(us->current_urb);
/* wait for us to be done */
wait_for_completion(&(us->notify));
return SUCCESS;
}
US_DEBUGP ("-- nothing to abort\n");
return FAILED;
}
/* This invokes the transport reset mechanism to reset the state of the
* device */
static int device_reset( Scsi_Cmnd *srb )
{
struct us_data *us = (struct us_data *)srb->host->hostdata[0];
US_DEBUGP("device_reset() called\n" );
return us->transport_reset(us);
}
/* This resets the device port, and simulates the device
* disconnect/reconnect for all drivers which have claimed other
* interfaces. */
static int bus_reset( Scsi_Cmnd *srb )
{
struct us_data *us = (struct us_data *)srb->host->hostdata[0];
int i;
int result;
/* we use the usb_reset_device() function to handle this for us */
US_DEBUGP("bus_reset() called\n");
/* if the device has been removed, this worked */
if (!us->pusb_dev) {
US_DEBUGP("-- device removed already\n");
return SUCCESS;
}
/* release the IRQ, if we have one */
down(&(us->irq_urb_sem));
if (us->irq_urb) {
US_DEBUGP("-- releasing irq URB\n");
result = usb_unlink_urb(us->irq_urb);
US_DEBUGP("-- usb_unlink_urb() returned %d\n", result);
}
up(&(us->irq_urb_sem));
/* attempt to reset the port */
if (usb_reset_device(us->pusb_dev) < 0)
return FAILED;
/* FIXME: This needs to lock out driver probing while it's working
* or we can have race conditions */
for (i = 0; i < us->pusb_dev->actconfig->bNumInterfaces; i++) {
struct usb_interface *intf =
&us->pusb_dev->actconfig->interface[i];
const struct usb_device_id *id;
/* if this is an unclaimed interface, skip it */
if (!intf->driver) {
continue;
}
US_DEBUGP("Examinging driver %s...", intf->driver->name);
/* skip interfaces which we've claimed */
if (intf->driver == &usb_storage_driver) {
US_DEBUGPX("skipping ourselves.\n");
continue;
}
/* simulate a disconnect and reconnect for all interfaces */
US_DEBUGPX("simulating disconnect/reconnect.\n");
down(&intf->driver->serialize);
intf->driver->disconnect(us->pusb_dev, intf->private_data);
id = usb_match_id(us->pusb_dev, intf, intf->driver->id_table);
intf->driver->probe(us->pusb_dev, i, id);
up(&intf->driver->serialize);
}
/* re-allocate the IRQ URB and submit it to restore connectivity
* for CBI devices
*/
if (us->protocol == US_PR_CBI) {
down(&(us->irq_urb_sem));
us->irq_urb->dev = us->pusb_dev;
result = usb_submit_urb(us->irq_urb);
US_DEBUGP("usb_submit_urb() returns %d\n", result);
up(&(us->irq_urb_sem));
}
US_DEBUGP("bus_reset() complete\n");
return SUCCESS;
}
/* FIXME: This doesn't do anything right now */
static int host_reset( Scsi_Cmnd *srb )
{
printk(KERN_CRIT "usb-storage: host_reset() requested but not implemented\n" );
return FAILED;
}
/***********************************************************************
* /proc/scsi/ functions
***********************************************************************/
/* we use this macro to help us write into the buffer */
#undef SPRINTF
#define SPRINTF(args...) \
do { if (pos < buffer+length) pos += sprintf(pos, ## args); } while (0)
static int proc_info (char *buffer, char **start, off_t offset, int length,
int hostno, int inout)
{
struct us_data *us;
char *pos = buffer;
/* if someone is sending us data, just throw it away */
if (inout)
return length;
/* lock the data structures */
down(&us_list_semaphore);
/* find our data from hostno */
us = us_list;
while (us) {
if (us->host_no == hostno)
break;
us = us->next;
}
/* release our lock on the data structures */
up(&us_list_semaphore);
/* if we couldn't find it, we return an error */
if (!us) {
return -ESRCH;
}
/* print the controller name */
SPRINTF(" Host scsi%d: usb-storage\n", hostno);
/* print product, vendor, and serial number strings */
SPRINTF(" Vendor: %s\n", us->vendor);
SPRINTF(" Product: %s\n", us->product);
SPRINTF("Serial Number: %s\n", us->serial);
/* show the protocol and transport */
SPRINTF(" Protocol: %s\n", us->protocol_name);
SPRINTF(" Transport: %s\n", us->transport_name);
/* show the GUID of the device */
SPRINTF(" GUID: " GUID_FORMAT "\n", GUID_ARGS(us->guid));
SPRINTF(" Attached: %s\n", us->pusb_dev ? "Yes" : "No");
/*
* Calculate start of next buffer, and return value.
*/
*start = buffer + offset;
if ((pos - buffer) < offset)
return (0);
else if ((pos - buffer - offset) < length)
return (pos - buffer - offset);
else
return (length);
}
/*
* this defines our 'host'
*/
Scsi_Host_Template usb_stor_host_template = {
name: "usb-storage",
proc_info: proc_info,
info: host_info,
detect: detect,
release: release,
command: command,
queuecommand: queuecommand,
eh_abort_handler: command_abort,
eh_device_reset_handler:device_reset,
eh_bus_reset_handler: bus_reset,
eh_host_reset_handler: host_reset,
can_queue: 1,
this_id: -1,
sg_tablesize: SG_ALL,
cmd_per_lun: 1,
present: 0,
unchecked_isa_dma: FALSE,
use_clustering: TRUE,
use_new_eh_code: TRUE,
emulated: TRUE
};
unsigned char usb_stor_sense_notready[18] = {
[0] = 0x70, /* current error */
[2] = 0x02, /* not ready */
[5] = 0x0a, /* additional length */
[10] = 0x04, /* not ready */
[11] = 0x03 /* manual intervention */
};
#define USB_STOR_SCSI_SENSE_HDRSZ 4
#define USB_STOR_SCSI_SENSE_10_HDRSZ 8
struct usb_stor_scsi_sense_hdr
{
__u8* dataLength;
__u8* mediumType;
__u8* devSpecParms;
__u8* blkDescLength;
};
typedef struct usb_stor_scsi_sense_hdr Usb_Stor_Scsi_Sense_Hdr;
union usb_stor_scsi_sense_hdr_u
{
Usb_Stor_Scsi_Sense_Hdr hdr;
__u8* array[USB_STOR_SCSI_SENSE_HDRSZ];
};
typedef union usb_stor_scsi_sense_hdr_u Usb_Stor_Scsi_Sense_Hdr_u;
struct usb_stor_scsi_sense_hdr_10
{
__u8* dataLengthMSB;
__u8* dataLengthLSB;
__u8* mediumType;
__u8* devSpecParms;
__u8* reserved1;
__u8* reserved2;
__u8* blkDescLengthMSB;
__u8* blkDescLengthLSB;
};
typedef struct usb_stor_scsi_sense_hdr_10 Usb_Stor_Scsi_Sense_Hdr_10;
union usb_stor_scsi_sense_hdr_10_u
{
Usb_Stor_Scsi_Sense_Hdr_10 hdr;
__u8* array[USB_STOR_SCSI_SENSE_10_HDRSZ];
};
typedef union usb_stor_scsi_sense_hdr_10_u Usb_Stor_Scsi_Sense_Hdr_10_u;
void usb_stor_scsiSenseParseBuffer( Scsi_Cmnd* , Usb_Stor_Scsi_Sense_Hdr_u*,
Usb_Stor_Scsi_Sense_Hdr_10_u*, int* );
int usb_stor_scsiSense10to6( Scsi_Cmnd* the10 )
{
__u8 *buffer=0;
int outputBufferSize = 0;
int length=0;
struct scatterlist *sg = 0;
int i=0, j=0, element=0;
Usb_Stor_Scsi_Sense_Hdr_u the6Locations;
Usb_Stor_Scsi_Sense_Hdr_10_u the10Locations;
int sb=0,si=0,db=0,di=0;
int sgLength=0;
US_DEBUGP("-- converting 10 byte sense data to 6 byte\n");
the10->cmnd[0] = the10->cmnd[0] & 0xBF;
/* Determine buffer locations */
usb_stor_scsiSenseParseBuffer( the10, &the6Locations, &the10Locations,
&length );
/* Work out minimum buffer to output */
outputBufferSize = *the10Locations.hdr.dataLengthLSB;
outputBufferSize += USB_STOR_SCSI_SENSE_HDRSZ;
/* Check to see if we need to trucate the output */
if ( outputBufferSize > length )
{
printk( KERN_WARNING USB_STORAGE
"Had to truncate MODE_SENSE_10 buffer into MODE_SENSE.\n" );
printk( KERN_WARNING USB_STORAGE
"outputBufferSize is %d and length is %d.\n",
outputBufferSize, length );
}
outputBufferSize = length;
/* Data length */
if ( *the10Locations.hdr.dataLengthMSB != 0 ) /* MSB must be zero */
{
printk( KERN_WARNING USB_STORAGE
"Command will be truncated to fit in SENSE6 buffer.\n" );
*the6Locations.hdr.dataLength = 0xff;
}
else
{
*the6Locations.hdr.dataLength = *the10Locations.hdr.dataLengthLSB;
}
/* Medium type and DevSpecific parms */
*the6Locations.hdr.mediumType = *the10Locations.hdr.mediumType;
*the6Locations.hdr.devSpecParms = *the10Locations.hdr.devSpecParms;
/* Block descriptor length */
if ( *the10Locations.hdr.blkDescLengthMSB != 0 ) /* MSB must be zero */
{
printk( KERN_WARNING USB_STORAGE
"Command will be truncated to fit in SENSE6 buffer.\n" );
*the6Locations.hdr.blkDescLength = 0xff;
}
else
{
*the6Locations.hdr.blkDescLength = *the10Locations.hdr.blkDescLengthLSB;
}
if ( the10->use_sg == 0 )
{
buffer = the10->request_buffer;
/* Copy the rest of the data */
memmove( &(buffer[USB_STOR_SCSI_SENSE_HDRSZ]),
&(buffer[USB_STOR_SCSI_SENSE_10_HDRSZ]),
outputBufferSize - USB_STOR_SCSI_SENSE_HDRSZ );
/* initialise last bytes left in buffer due to smaller header */
memset( &(buffer[outputBufferSize
-(USB_STOR_SCSI_SENSE_10_HDRSZ-USB_STOR_SCSI_SENSE_HDRSZ)]),
0,
USB_STOR_SCSI_SENSE_10_HDRSZ-USB_STOR_SCSI_SENSE_HDRSZ );
}
else
{
sg = (struct scatterlist *) the10->request_buffer;
/* scan through this scatterlist and figure out starting positions */
for ( i=0; i < the10->use_sg; i++)
{
sgLength = sg[i].length;
for ( j=0; j<sgLength; j++ )
{
/* get to end of header */
if ( element == USB_STOR_SCSI_SENSE_HDRSZ )
{
db=i;
di=j;
}
if ( element == USB_STOR_SCSI_SENSE_10_HDRSZ )
{
sb=i;
si=j;
/* we've found both sets now, exit loops */
j=sgLength;
i=the10->use_sg;
}
element++;
}
}
/* Now we know where to start the copy from */
element = USB_STOR_SCSI_SENSE_HDRSZ;
while ( element < outputBufferSize
-(USB_STOR_SCSI_SENSE_10_HDRSZ-USB_STOR_SCSI_SENSE_HDRSZ) )
{
/* check limits */
if ( sb >= the10->use_sg ||
si >= sg[sb].length ||
db >= the10->use_sg ||
di >= sg[db].length )
{
printk( KERN_ERR USB_STORAGE
"Buffer overrun averted, this shouldn't happen!\n" );
break;
}
/* copy one byte */
sg[db].address[di] = sg[sb].address[si];
/* get next destination */
if ( sg[db].length-1 == di )
{
db++;
di=0;
}
else
{
di++;
}
/* get next source */
if ( sg[sb].length-1 == si )
{
sb++;
si=0;
}
else
{
si++;
}
element++;
}
/* zero the remaining bytes */
while ( element < outputBufferSize )
{
/* check limits */
if ( db >= the10->use_sg ||
di >= sg[db].length )
{
printk( KERN_ERR USB_STORAGE
"Buffer overrun averted, this shouldn't happen!\n" );
break;
}
sg[db].address[di] = 0;
/* get next destination */
if ( sg[db].length-1 == di )
{
db++;
di=0;
}
else
{
di++;
}
element++;
}
}
/* All done any everything was fine */
return 0;
}
int usb_stor_scsiSense6to10( Scsi_Cmnd* the6 )
{
/* will be used to store part of buffer */
__u8 tempBuffer[USB_STOR_SCSI_SENSE_10_HDRSZ-USB_STOR_SCSI_SENSE_HDRSZ],
*buffer=0;
int outputBufferSize = 0;
int length=0;
struct scatterlist *sg = 0;
int i=0, j=0, element=0;
Usb_Stor_Scsi_Sense_Hdr_u the6Locations;
Usb_Stor_Scsi_Sense_Hdr_10_u the10Locations;
int sb=0,si=0,db=0,di=0;
int lsb=0,lsi=0,ldb=0,ldi=0;
US_DEBUGP("-- converting 6 byte sense data to 10 byte\n");
the6->cmnd[0] = the6->cmnd[0] | 0x40;
/* Determine buffer locations */
usb_stor_scsiSenseParseBuffer( the6, &the6Locations, &the10Locations,
&length );
/* Work out minimum buffer to output */
outputBufferSize = *the6Locations.hdr.dataLength;
outputBufferSize += USB_STOR_SCSI_SENSE_10_HDRSZ;
/* Check to see if we need to trucate the output */
if ( outputBufferSize > length )
{
printk( KERN_WARNING USB_STORAGE
"Had to truncate MODE_SENSE into MODE_SENSE_10 buffer.\n" );
printk( KERN_WARNING USB_STORAGE
"outputBufferSize is %d and length is %d.\n",
outputBufferSize, length );
}
outputBufferSize = length;
/* Block descriptor length - save these before overwriting */
tempBuffer[2] = *the10Locations.hdr.blkDescLengthMSB;
tempBuffer[3] = *the10Locations.hdr.blkDescLengthLSB;
*the10Locations.hdr.blkDescLengthLSB = *the6Locations.hdr.blkDescLength;
*the10Locations.hdr.blkDescLengthMSB = 0;
/* reserved - save these before overwriting */
tempBuffer[0] = *the10Locations.hdr.reserved1;
tempBuffer[1] = *the10Locations.hdr.reserved2;
*the10Locations.hdr.reserved1 = *the10Locations.hdr.reserved2 = 0;
/* Medium type and DevSpecific parms */
*the10Locations.hdr.devSpecParms = *the6Locations.hdr.devSpecParms;
*the10Locations.hdr.mediumType = *the6Locations.hdr.mediumType;
/* Data length */
*the10Locations.hdr.dataLengthLSB = *the6Locations.hdr.dataLength;
*the10Locations.hdr.dataLengthMSB = 0;
if ( !the6->use_sg )
{
buffer = the6->request_buffer;
/* Copy the rest of the data */
memmove( &(buffer[USB_STOR_SCSI_SENSE_10_HDRSZ]),
&(buffer[USB_STOR_SCSI_SENSE_HDRSZ]),
outputBufferSize-USB_STOR_SCSI_SENSE_10_HDRSZ );
/* Put the first four bytes (after header) in place */
memcpy( &(buffer[USB_STOR_SCSI_SENSE_10_HDRSZ]),
tempBuffer,
USB_STOR_SCSI_SENSE_10_HDRSZ-USB_STOR_SCSI_SENSE_HDRSZ );
}
else
{
sg = (struct scatterlist *) the6->request_buffer;
/* scan through this scatterlist and figure out ending positions */
for ( i=0; i < the6->use_sg; i++)
{
for ( j=0; j<sg[i].length; j++ )
{
/* get to end of header */
if ( element == USB_STOR_SCSI_SENSE_HDRSZ )
{
ldb=i;
ldi=j;
}
if ( element == USB_STOR_SCSI_SENSE_10_HDRSZ )
{
lsb=i;
lsi=j;
/* we've found both sets now, exit loops */
j=sg[i].length;
i=the6->use_sg;
break;
}
element++;
}
}
/* scan through this scatterlist and figure out starting positions */
element = length-1;
/* destination is the last element */
db=the6->use_sg-1;
di=sg[db].length-1;
for ( i=the6->use_sg-1; i >= 0; i--)
{
for ( j=sg[i].length-1; j>=0; j-- )
{
/* get to end of header and find source for copy */
if ( element == length - 1
- (USB_STOR_SCSI_SENSE_10_HDRSZ-USB_STOR_SCSI_SENSE_HDRSZ) )
{
sb=i;
si=j;
/* we've found both sets now, exit loops */
j=-1;
i=-1;
}
element--;
}
}
/* Now we know where to start the copy from */
element = length-1
- (USB_STOR_SCSI_SENSE_10_HDRSZ-USB_STOR_SCSI_SENSE_HDRSZ);
while ( element >= USB_STOR_SCSI_SENSE_10_HDRSZ )
{
/* check limits */
if ( ( sb <= lsb && si < lsi ) ||
( db <= ldb && di < ldi ) )
{
printk( KERN_ERR USB_STORAGE
"Buffer overrun averted, this shouldn't happen!\n" );
break;
}
/* copy one byte */
sg[db].address[di] = sg[sb].address[si];
/* get next destination */
if ( di == 0 )
{
db--;
di=sg[db].length-1;
}
else
{
di--;
}
/* get next source */
if ( si == 0 )
{
sb--;
si=sg[sb].length-1;
}
else
{
si--;
}
element--;
}
/* copy the remaining four bytes */
while ( element >= USB_STOR_SCSI_SENSE_HDRSZ )
{
/* check limits */
if ( db <= ldb && di < ldi )
{
printk( KERN_ERR USB_STORAGE
"Buffer overrun averted, this shouldn't happen!\n" );
break;
}
sg[db].address[di] = tempBuffer[element-USB_STOR_SCSI_SENSE_HDRSZ];
/* get next destination */
if ( di == 0 )
{
db--;
di=sg[db].length-1;
}
else
{
di--;
}
element--;
}
}
/* All done and everything was fine */
return 0;
}
void usb_stor_scsiSenseParseBuffer( Scsi_Cmnd* srb, Usb_Stor_Scsi_Sense_Hdr_u* the6,
Usb_Stor_Scsi_Sense_Hdr_10_u* the10,
int* length_p )
{
int i = 0, j=0, element=0;
struct scatterlist *sg = 0;
int length = 0;
__u8* buffer=0;
/* are we scatter-gathering? */
if ( srb->use_sg != 0 )
{
/* loop over all the scatter gather structures and
* get pointer to the data members in the headers
* (also work out the length while we're here)
*/
sg = (struct scatterlist *) srb->request_buffer;
for (i = 0; i < srb->use_sg; i++)
{
length += sg[i].length;
/* We only do the inner loop for the headers */
if ( element < USB_STOR_SCSI_SENSE_10_HDRSZ )
{
/* scan through this scatterlist */
for ( j=0; j<sg[i].length; j++ )
{
if ( element < USB_STOR_SCSI_SENSE_HDRSZ )
{
/* fill in the pointers for both header types */
the6->array[element] = &(sg[i].address[j]);
the10->array[element] = &(sg[i].address[j]);
}
else if ( element < USB_STOR_SCSI_SENSE_10_HDRSZ )
{
/* only the longer headers still cares now */
the10->array[element] = &(sg[i].address[j]);
}
/* increase element counter */
element++;
}
}
}
}
else
{
length = srb->request_bufflen;
buffer = srb->request_buffer;
if ( length < USB_STOR_SCSI_SENSE_10_HDRSZ )
printk( KERN_ERR USB_STORAGE
"Buffer length smaller than header!!" );
for( i=0; i<USB_STOR_SCSI_SENSE_10_HDRSZ; i++ )
{
if ( i < USB_STOR_SCSI_SENSE_HDRSZ )
{
the6->array[i] = &(buffer[i]);
the10->array[i] = &(buffer[i]);
}
else
{
the10->array[i] = &(buffer[i]);
}
}
}
/* Set value of length passed in */
*length_p = length;
}
|