Viewing file:  ppa.c (27.77 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* ppa.c -- low level driver for the IOMEGA PPA3
* parallel port SCSI host adapter.
*
* (The PPA3 is the embedded controller in the ZIP drive.)
*
* (c) 1995,1996 Grant R. Guenther, grant@torque.net,
* under the terms of the GNU General Public License.
*
* Current Maintainer: David Campbell (Perth, Western Australia, GMT+0800)
* campbell@torque.net
*/
#include <linux/config.h>
/* The following #define is to avoid a clash with hosts.c */
#define PPA_CODE 1
#include <linux/blk.h>
#include <asm/io.h>
#include <linux/parport.h>
#include "sd.h"
#include "hosts.h"
int ppa_release(struct Scsi_Host *);
static void ppa_reset_pulse(unsigned int base);
typedef struct {
struct pardevice *dev; /* Parport device entry */
int base; /* Actual port address */
int mode; /* Transfer mode */
int host; /* Host number (for proc) */
Scsi_Cmnd *cur_cmd; /* Current queued command */
struct tq_struct ppa_tq; /* Polling interrupt stuff */
unsigned long jstart; /* Jiffies at start */
unsigned long recon_tmo; /* How many usecs to wait for reconnection (6th bit) */
unsigned int failed:1; /* Failure flag */
unsigned int p_busy:1; /* Parport sharing busy flag */
} ppa_struct;
#define PPA_EMPTY \
{ dev: NULL, \
base: -1, \
mode: PPA_AUTODETECT, \
host: -1, \
cur_cmd: NULL, \
ppa_tq: { routine: ppa_interrupt }, \
jstart: 0, \
recon_tmo: PPA_RECON_TMO, \
failed: 0, \
p_busy: 0 \
}
#include "ppa.h"
#define NO_HOSTS 4
static ppa_struct ppa_hosts[NO_HOSTS] =
{PPA_EMPTY, PPA_EMPTY, PPA_EMPTY, PPA_EMPTY};
#define PPA_BASE(x) ppa_hosts[(x)].base
void ppa_wakeup(void *ref)
{
ppa_struct *ppa_dev = (ppa_struct *) ref;
if (!ppa_dev->p_busy)
return;
if (parport_claim(ppa_dev->dev)) {
printk("ppa: bug in ppa_wakeup\n");
return;
}
ppa_dev->p_busy = 0;
ppa_dev->base = ppa_dev->dev->port->base;
if (ppa_dev->cur_cmd)
ppa_dev->cur_cmd->SCp.phase++;
return;
}
int ppa_release(struct Scsi_Host *host)
{
int host_no = host->unique_id;
printk("Releasing ppa%i\n", host_no);
parport_unregister_device(ppa_hosts[host_no].dev);
return 0;
}
static int ppa_pb_claim(int host_no)
{
if (parport_claim(ppa_hosts[host_no].dev)) {
ppa_hosts[host_no].p_busy = 1;
return 1;
}
if (ppa_hosts[host_no].cur_cmd)
ppa_hosts[host_no].cur_cmd->SCp.phase++;
return 0;
}
#define ppa_pb_release(x) parport_release(ppa_hosts[(x)].dev)
/***************************************************************************
* Parallel port probing routines *
***************************************************************************/
static Scsi_Host_Template driver_template = PPA;
#include "scsi_module.c"
/*
* Start of Chipset kludges
*/
int ppa_detect(Scsi_Host_Template * host)
{
struct Scsi_Host *hreg;
int ports;
int i, nhosts, try_again;
struct parport *pb;
/*
* unlock to allow the lowlevel parport driver to probe
* the irqs
*/
spin_unlock_irq(&io_request_lock);
pb = parport_enumerate();
printk("ppa: Version %s\n", PPA_VERSION);
nhosts = 0;
try_again = 0;
if (!pb) {
printk("ppa: parport reports no devices.\n");
spin_lock_irq(&io_request_lock);
return 0;
}
retry_entry:
for (i = 0; pb; i++, pb = pb->next) {
int modes, ppb, ppb_hi;
ppa_hosts[i].dev =
parport_register_device(pb, "ppa", NULL, ppa_wakeup,
NULL, 0, (void *) &ppa_hosts[i]);
if (!ppa_hosts[i].dev)
continue;
/* Claim the bus so it remembers what we do to the control
* registers. [ CTR and ECP ]
*/
if (ppa_pb_claim(i)) {
unsigned long now = jiffies;
while (ppa_hosts[i].p_busy) {
schedule(); /* We are safe to schedule here */
if (time_after(jiffies, now + 3 * HZ)) {
printk(KERN_ERR "ppa%d: failed to claim parport because a "
"pardevice is owning the port for too longtime!\n",
i);
parport_unregister_device(ppa_hosts[i].dev);
spin_lock_irq(&io_request_lock);
return 0;
}
}
}
ppb = PPA_BASE(i) = ppa_hosts[i].dev->port->base;
ppb_hi = ppa_hosts[i].dev->port->base_hi;
w_ctr(ppb, 0x0c);
modes = ppa_hosts[i].dev->port->modes;
/* Mode detection works up the chain of speed
* This avoids a nasty if-then-else-if-... tree
*/
ppa_hosts[i].mode = PPA_NIBBLE;
if (modes & PARPORT_MODE_TRISTATE)
ppa_hosts[i].mode = PPA_PS2;
if (modes & PARPORT_MODE_ECP) {
w_ecr(ppb_hi, 0x20);
ppa_hosts[i].mode = PPA_PS2;
}
if ((modes & PARPORT_MODE_EPP) && (modes & PARPORT_MODE_ECP))
w_ecr(ppb_hi, 0x80);
/* Done configuration */
ppa_pb_release(i);
if (ppa_init(i)) {
parport_unregister_device(ppa_hosts[i].dev);
continue;
}
/* now the glue ... */
switch (ppa_hosts[i].mode) {
case PPA_NIBBLE:
ports = 3;
break;
case PPA_PS2:
ports = 3;
break;
case PPA_EPP_8:
case PPA_EPP_16:
case PPA_EPP_32:
ports = 8;
break;
default: /* Never gets here */
continue;
}
host->can_queue = PPA_CAN_QUEUE;
host->sg_tablesize = ppa_sg;
hreg = scsi_register(host, 0);
if(hreg == NULL)
continue;
hreg->io_port = pb->base;
hreg->n_io_port = ports;
hreg->dma_channel = -1;
hreg->unique_id = i;
ppa_hosts[i].host = hreg->host_no;
nhosts++;
}
if (nhosts == 0) {
if (try_again == 1) {
printk("WARNING - no ppa compatible devices found.\n");
printk(" As of 31/Aug/1998 Iomega started shipping parallel\n");
printk(" port ZIP drives with a different interface which is\n");
printk(" supported by the imm (ZIP Plus) driver. If the\n");
printk(" cable is marked with \"AutoDetect\", this is what has\n");
printk(" happened.\n");
spin_lock_irq(&io_request_lock);
return 0;
}
try_again = 1;
goto retry_entry;
} else {
spin_lock_irq(&io_request_lock);
return 1; /* return number of hosts detected */
}
}
/* This is to give the ppa driver a way to modify the timings (and other
* parameters) by writing to the /proc/scsi/ppa/0 file.
* Very simple method really... (To simple, no error checking :( )
* Reason: Kernel hackers HATE having to unload and reload modules for
* testing...
* Also gives a method to use a script to obtain optimum timings (TODO)
*/
static inline int ppa_proc_write(int hostno, char *buffer, int length)
{
unsigned long x;
if ((length > 5) && (strncmp(buffer, "mode=", 5) == 0)) {
x = simple_strtoul(buffer + 5, NULL, 0);
ppa_hosts[hostno].mode = x;
return length;
}
if ((length > 10) && (strncmp(buffer, "recon_tmo=", 10) == 0)) {
x = simple_strtoul(buffer + 10, NULL, 0);
ppa_hosts[hostno].recon_tmo = x;
printk("ppa: recon_tmo set to %ld\n", x);
return length;
}
printk("ppa /proc: invalid variable\n");
return (-EINVAL);
}
int ppa_proc_info(char *buffer, char **start, off_t offset,
int length, int hostno, int inout)
{
int i;
int len = 0;
for (i = 0; i < 4; i++)
if (ppa_hosts[i].host == hostno)
break;
if (inout)
return ppa_proc_write(i, buffer, length);
len += sprintf(buffer + len, "Version : %s\n", PPA_VERSION);
len += sprintf(buffer + len, "Parport : %s\n", ppa_hosts[i].dev->port->name);
len += sprintf(buffer + len, "Mode : %s\n", PPA_MODE_STRING[ppa_hosts[i].mode]);
#if PPA_DEBUG > 0
len += sprintf(buffer + len, "recon_tmo : %lu\n", ppa_hosts[i].recon_tmo);
#endif
/* Request for beyond end of buffer */
if (offset > length)
return 0;
*start = buffer + offset;
len -= offset;
if (len > length)
len = length;
return len;
}
static int device_check(int host_no);
#if PPA_DEBUG > 0
#define ppa_fail(x,y) printk("ppa: ppa_fail(%i) from %s at line %d\n",\
y, __FUNCTION__, __LINE__); ppa_fail_func(x,y);
static inline void ppa_fail_func(int host_no, int error_code)
#else
static inline void ppa_fail(int host_no, int error_code)
#endif
{
/* If we fail a device then we trash status / message bytes */
if (ppa_hosts[host_no].cur_cmd) {
ppa_hosts[host_no].cur_cmd->result = error_code << 16;
ppa_hosts[host_no].failed = 1;
}
}
/*
* Wait for the high bit to be set.
*
* In principle, this could be tied to an interrupt, but the adapter
* doesn't appear to be designed to support interrupts. We spin on
* the 0x80 ready bit.
*/
static unsigned char ppa_wait(int host_no)
{
int k;
unsigned short ppb = PPA_BASE(host_no);
unsigned char r;
k = PPA_SPIN_TMO;
/* Wait for bit 6 and 7 - PJC */
for (r = r_str (ppb); ((r & 0xc0)!=0xc0) && (k); k--) {
udelay (1);
r = r_str (ppb);
}
/*
* return some status information.
* Semantics: 0xc0 = ZIP wants more data
* 0xd0 = ZIP wants to send more data
* 0xe0 = ZIP is expecting SCSI command data
* 0xf0 = end of transfer, ZIP is sending status
*/
if (k)
return (r & 0xf0);
/* Counter expired - Time out occurred */
ppa_fail(host_no, DID_TIME_OUT);
printk("ppa timeout in ppa_wait\n");
return 0; /* command timed out */
}
/*
* Clear EPP Timeout Bit
*/
static inline void epp_reset(unsigned short ppb)
{
int i;
i = r_str(ppb);
w_str(ppb, i);
w_str(ppb, i & 0xfe);
}
/*
* Wait for empty ECP fifo (if we are in ECP fifo mode only)
*/
static inline void ecp_sync(unsigned short hostno)
{
int i, ppb_hi=ppa_hosts[hostno].dev->port->base_hi;
if (ppb_hi == 0) return;
if ((r_ecr(ppb_hi) & 0xe0) == 0x60) { /* mode 011 == ECP fifo mode */
for (i = 0; i < 100; i++) {
if (r_ecr(ppb_hi) & 0x01)
return;
udelay(5);
}
printk("ppa: ECP sync failed as data still present in FIFO.\n");
}
}
static int ppa_byte_out(unsigned short base, const char *buffer, int len)
{
int i;
for (i = len; i; i--) {
w_dtr(base, *buffer++);
w_ctr(base, 0xe);
w_ctr(base, 0xc);
}
return 1; /* All went well - we hope! */
}
static int ppa_byte_in(unsigned short base, char *buffer, int len)
{
int i;
for (i = len; i; i--) {
*buffer++ = r_dtr(base);
w_ctr(base, 0x27);
w_ctr(base, 0x25);
}
return 1; /* All went well - we hope! */
}
static int ppa_nibble_in(unsigned short base, char *buffer, int len)
{
for (; len; len--) {
unsigned char h;
w_ctr(base, 0x4);
h = r_str(base) & 0xf0;
w_ctr(base, 0x6);
*buffer++ = h | ((r_str(base) & 0xf0) >> 4);
}
return 1; /* All went well - we hope! */
}
static int ppa_out(int host_no, char *buffer, int len)
{
int r;
unsigned short ppb = PPA_BASE(host_no);
r = ppa_wait(host_no);
if ((r & 0x50) != 0x40) {
ppa_fail(host_no, DID_ERROR);
return 0;
}
switch (ppa_hosts[host_no].mode) {
case PPA_NIBBLE:
case PPA_PS2:
/* 8 bit output, with a loop */
r = ppa_byte_out(ppb, buffer, len);
break;
case PPA_EPP_32:
case PPA_EPP_16:
case PPA_EPP_8:
epp_reset(ppb);
w_ctr(ppb, 0x4);
#ifdef CONFIG_SCSI_IZIP_EPP16
if (!(((long) buffer | len) & 0x01))
outsw(ppb + 4, buffer, len >> 1);
#else
if (!(((long) buffer | len) & 0x03))
outsl(ppb + 4, buffer, len >> 2);
#endif
else
outsb(ppb + 4, buffer, len);
w_ctr(ppb, 0xc);
r = !(r_str(ppb) & 0x01);
w_ctr(ppb, 0xc);
ecp_sync(host_no);
break;
default:
printk("PPA: bug in ppa_out()\n");
r = 0;
}
return r;
}
static int ppa_in(int host_no, char *buffer, int len)
{
int r;
unsigned short ppb = PPA_BASE(host_no);
r = ppa_wait(host_no);
if ((r & 0x50) != 0x50) {
ppa_fail(host_no, DID_ERROR);
return 0;
}
switch (ppa_hosts[host_no].mode) {
case PPA_NIBBLE:
/* 4 bit input, with a loop */
r = ppa_nibble_in(ppb, buffer, len);
w_ctr(ppb, 0xc);
break;
case PPA_PS2:
/* 8 bit input, with a loop */
w_ctr(ppb, 0x25);
r = ppa_byte_in(ppb, buffer, len);
w_ctr(ppb, 0x4);
w_ctr(ppb, 0xc);
break;
case PPA_EPP_32:
case PPA_EPP_16:
case PPA_EPP_8:
epp_reset(ppb);
w_ctr(ppb, 0x24);
#ifdef CONFIG_SCSI_IZIP_EPP16
if (!(((long) buffer | len) & 0x01))
insw(ppb + 4, buffer, len >> 1);
#else
if (!(((long) buffer | len) & 0x03))
insl(ppb + 4, buffer, len >> 2);
#endif
else
insb(ppb + 4, buffer, len);
w_ctr(ppb, 0x2c);
r = !(r_str(ppb) & 0x01);
w_ctr(ppb, 0x2c);
ecp_sync(host_no);
break;
default:
printk("PPA: bug in ppa_ins()\n");
r = 0;
break;
}
return r;
}
/* end of ppa_io.h */
static inline void ppa_d_pulse(unsigned short ppb, unsigned char b)
{
w_dtr(ppb, b);
w_ctr(ppb, 0xc);
w_ctr(ppb, 0xe);
w_ctr(ppb, 0xc);
w_ctr(ppb, 0x4);
w_ctr(ppb, 0xc);
}
static void ppa_disconnect(int host_no)
{
unsigned short ppb = PPA_BASE(host_no);
ppa_d_pulse(ppb, 0);
ppa_d_pulse(ppb, 0x3c);
ppa_d_pulse(ppb, 0x20);
ppa_d_pulse(ppb, 0xf);
}
static inline void ppa_c_pulse(unsigned short ppb, unsigned char b)
{
w_dtr(ppb, b);
w_ctr(ppb, 0x4);
w_ctr(ppb, 0x6);
w_ctr(ppb, 0x4);
w_ctr(ppb, 0xc);
}
static inline void ppa_connect(int host_no, int flag)
{
unsigned short ppb = PPA_BASE(host_no);
ppa_c_pulse(ppb, 0);
ppa_c_pulse(ppb, 0x3c);
ppa_c_pulse(ppb, 0x20);
if ((flag == CONNECT_EPP_MAYBE) &&
IN_EPP_MODE(ppa_hosts[host_no].mode))
ppa_c_pulse(ppb, 0xcf);
else
ppa_c_pulse(ppb, 0x8f);
}
static int ppa_select(int host_no, int target)
{
int k;
unsigned short ppb = PPA_BASE(host_no);
/*
* Bit 6 (0x40) is the device selected bit.
* First we must wait till the current device goes off line...
*/
k = PPA_SELECT_TMO;
do {
k--;
udelay(1);
} while ((r_str(ppb) & 0x40) && (k));
if (!k)
return 0;
w_dtr(ppb, (1 << target));
w_ctr(ppb, 0xe);
w_ctr(ppb, 0xc);
w_dtr(ppb, 0x80); /* This is NOT the initator */
w_ctr(ppb, 0x8);
k = PPA_SELECT_TMO;
do {
k--;
udelay(1);
}
while (!(r_str(ppb) & 0x40) && (k));
if (!k)
return 0;
return 1;
}
/*
* This is based on a trace of what the Iomega DOS 'guest' driver does.
* I've tried several different kinds of parallel ports with guest and
* coded this to react in the same ways that it does.
*
* The return value from this function is just a hint about where the
* handshaking failed.
*
*/
static int ppa_init(int host_no)
{
int retv;
unsigned short ppb = PPA_BASE(host_no);
#if defined(CONFIG_PARPORT) || defined(CONFIG_PARPORT_MODULE)
if (ppa_pb_claim(host_no))
while (ppa_hosts[host_no].p_busy)
schedule(); /* We can safe schedule here */
#endif
ppa_disconnect(host_no);
ppa_connect(host_no, CONNECT_NORMAL);
retv = 2; /* Failed */
w_ctr(ppb, 0xe);
if ((r_str(ppb) & 0x08) == 0x08)
retv--;
w_ctr(ppb, 0xc);
if ((r_str(ppb) & 0x08) == 0x00)
retv--;
if (!retv)
ppa_reset_pulse(ppb);
udelay(1000); /* Allow devices to settle down */
ppa_disconnect(host_no);
udelay(1000); /* Another delay to allow devices to settle */
if (!retv)
retv = device_check(host_no);
ppa_pb_release(host_no);
return retv;
}
static inline int ppa_send_command(Scsi_Cmnd * cmd)
{
int host_no = cmd->host->unique_id;
int k;
w_ctr(PPA_BASE(host_no), 0x0c);
for (k = 0; k < cmd->cmd_len; k++)
if (!ppa_out(host_no, &cmd->cmnd[k], 1))
return 0;
return 1;
}
/*
* The bulk flag enables some optimisations in the data transfer loops,
* it should be true for any command that transfers data in integral
* numbers of sectors.
*
* The driver appears to remain stable if we speed up the parallel port
* i/o in this function, but not elsewhere.
*/
static int ppa_completion(Scsi_Cmnd * cmd)
{
/* Return codes:
* -1 Error
* 0 Told to schedule
* 1 Finished data transfer
*/
int host_no = cmd->host->unique_id;
unsigned short ppb = PPA_BASE(host_no);
unsigned long start_jiffies = jiffies;
unsigned char r, v;
int fast, bulk, status;
v = cmd->cmnd[0];
bulk = ((v == READ_6) ||
(v == READ_10) ||
(v == WRITE_6) ||
(v == WRITE_10));
/*
* We only get here if the drive is ready to comunicate,
* hence no need for a full ppa_wait.
*/
r = (r_str(ppb) & 0xf0);
while (r != (unsigned char) 0xf0) {
/*
* If we have been running for more than a full timer tick
* then take a rest.
*/
if (time_after(jiffies, start_jiffies + 1))
return 0;
if ((cmd->SCp.this_residual <= 0)) {
ppa_fail(host_no, DID_ERROR);
return -1; /* ERROR_RETURN */
}
/* On some hardware we have SCSI disconnected (6th bit low)
* for about 100usecs. It is too expensive to wait a
* tick on every loop so we busy wait for no more than
* 500usecs to give the drive a chance first. We do not
* change things for "normal" hardware since generally
* the 6th bit is always high.
* This makes the CPU load higher on some hardware
* but otherwise we can not get more then 50K/secs
* on this problem hardware.
*/
if ((r & 0xc0) != 0xc0) {
/* Wait for reconnection should be no more than
* jiffy/2 = 5ms = 5000 loops
*/
unsigned long k = ppa_hosts[host_no].recon_tmo;
for (; k && ((r = (r_str(ppb) & 0xf0)) & 0xc0) != 0xc0; k--)
udelay(1);
if(!k)
return 0;
}
/* determine if we should use burst I/O */
fast = (bulk && (cmd->SCp.this_residual >= PPA_BURST_SIZE))
? PPA_BURST_SIZE : 1;
if (r == (unsigned char) 0xc0)
status = ppa_out(host_no, cmd->SCp.ptr, fast);
else
status = ppa_in(host_no, cmd->SCp.ptr, fast);
cmd->SCp.ptr += fast;
cmd->SCp.this_residual -= fast;
if (!status) {
ppa_fail(host_no, DID_BUS_BUSY);
return -1; /* ERROR_RETURN */
}
if (cmd->SCp.buffer && !cmd->SCp.this_residual) {
/* if scatter/gather, advance to the next segment */
if (cmd->SCp.buffers_residual--) {
cmd->SCp.buffer++;
cmd->SCp.this_residual = cmd->SCp.buffer->length;
cmd->SCp.ptr = cmd->SCp.buffer->address;
}
}
/* Now check to see if the drive is ready to comunicate */
r = (r_str(ppb) & 0xf0);
/* If not, drop back down to the scheduler and wait a timer tick */
if (!(r & 0x80))
return 0;
}
return 1; /* FINISH_RETURN */
}
/* deprecated synchronous interface */
int ppa_command(Scsi_Cmnd * cmd)
{
static int first_pass = 1;
int host_no = cmd->host->unique_id;
if (first_pass) {
printk("ppa: using non-queuing interface\n");
first_pass = 0;
}
if (ppa_hosts[host_no].cur_cmd) {
printk("PPA: bug in ppa_command\n");
return 0;
}
ppa_hosts[host_no].failed = 0;
ppa_hosts[host_no].jstart = jiffies;
ppa_hosts[host_no].cur_cmd = cmd;
cmd->result = DID_ERROR << 16; /* default return code */
cmd->SCp.phase = 0;
ppa_pb_claim(host_no);
while (ppa_engine(&ppa_hosts[host_no], cmd))
schedule();
if (cmd->SCp.phase) /* Only disconnect if we have connected */
ppa_disconnect(cmd->host->unique_id);
ppa_pb_release(host_no);
ppa_hosts[host_no].cur_cmd = 0;
return cmd->result;
}
/*
* Since the PPA itself doesn't generate interrupts, we use
* the scheduler's task queue to generate a stream of call-backs and
* complete the request when the drive is ready.
*/
static void ppa_interrupt(void *data)
{
ppa_struct *tmp = (ppa_struct *) data;
Scsi_Cmnd *cmd = tmp->cur_cmd;
unsigned long flags;
if (!cmd) {
printk("PPA: bug in ppa_interrupt\n");
return;
}
if (ppa_engine(tmp, cmd)) {
tmp->ppa_tq.data = (void *) tmp;
tmp->ppa_tq.sync = 0;
queue_task(&tmp->ppa_tq, &tq_timer);
return;
}
/* Command must of completed hence it is safe to let go... */
#if PPA_DEBUG > 0
switch ((cmd->result >> 16) & 0xff) {
case DID_OK:
break;
case DID_NO_CONNECT:
printk("ppa: no device at SCSI ID %i\n", cmd->target);
break;
case DID_BUS_BUSY:
printk("ppa: BUS BUSY - EPP timeout detected\n");
break;
case DID_TIME_OUT:
printk("ppa: unknown timeout\n");
break;
case DID_ABORT:
printk("ppa: told to abort\n");
break;
case DID_PARITY:
printk("ppa: parity error (???)\n");
break;
case DID_ERROR:
printk("ppa: internal driver error\n");
break;
case DID_RESET:
printk("ppa: told to reset device\n");
break;
case DID_BAD_INTR:
printk("ppa: bad interrupt (???)\n");
break;
default:
printk("ppa: bad return code (%02x)\n", (cmd->result >> 16) & 0xff);
}
#endif
if (cmd->SCp.phase > 1)
ppa_disconnect(cmd->host->unique_id);
if (cmd->SCp.phase > 0)
ppa_pb_release(cmd->host->unique_id);
tmp->cur_cmd = 0;
spin_lock_irqsave(&io_request_lock, flags);
cmd->scsi_done(cmd);
spin_unlock_irqrestore(&io_request_lock, flags);
return;
}
static int ppa_engine(ppa_struct * tmp, Scsi_Cmnd * cmd)
{
int host_no = cmd->host->unique_id;
unsigned short ppb = PPA_BASE(host_no);
unsigned char l = 0, h = 0;
int retv;
/* First check for any errors that may of occurred
* Here we check for internal errors
*/
if (tmp->failed)
return 0;
switch (cmd->SCp.phase) {
case 0: /* Phase 0 - Waiting for parport */
if ((jiffies - tmp->jstart) > HZ) {
/*
* We waited more than a second
* for parport to call us
*/
ppa_fail(host_no, DID_BUS_BUSY);
return 0;
}
return 1; /* wait until ppa_wakeup claims parport */
case 1: /* Phase 1 - Connected */
{ /* Perform a sanity check for cable unplugged */
int retv = 2; /* Failed */
ppa_connect(host_no, CONNECT_EPP_MAYBE);
w_ctr(ppb, 0xe);
if ((r_str(ppb) & 0x08) == 0x08)
retv--;
w_ctr(ppb, 0xc);
if ((r_str(ppb) & 0x08) == 0x00)
retv--;
if (retv) {
if ((jiffies - tmp->jstart) > (1 * HZ)) {
printk("ppa: Parallel port cable is unplugged!!\n");
ppa_fail(host_no, DID_BUS_BUSY);
return 0;
} else {
ppa_disconnect(host_no);
return 1; /* Try again in a jiffy */
}
}
cmd->SCp.phase++;
}
case 2: /* Phase 2 - We are now talking to the scsi bus */
if (!ppa_select(host_no, cmd->target)) {
ppa_fail(host_no, DID_NO_CONNECT);
return 0;
}
cmd->SCp.phase++;
case 3: /* Phase 3 - Ready to accept a command */
w_ctr(ppb, 0x0c);
if (!(r_str(ppb) & 0x80))
return 1;
if (!ppa_send_command(cmd))
return 0;
cmd->SCp.phase++;
case 4: /* Phase 4 - Setup scatter/gather buffers */
if (cmd->use_sg) {
/* if many buffers are available, start filling the first */
cmd->SCp.buffer = (struct scatterlist *) cmd->request_buffer;
cmd->SCp.this_residual = cmd->SCp.buffer->length;
cmd->SCp.ptr = cmd->SCp.buffer->address;
} else {
/* else fill the only available buffer */
cmd->SCp.buffer = NULL;
cmd->SCp.this_residual = cmd->request_bufflen;
cmd->SCp.ptr = cmd->request_buffer;
}
cmd->SCp.buffers_residual = cmd->use_sg;
cmd->SCp.phase++;
case 5: /* Phase 5 - Data transfer stage */
w_ctr(ppb, 0x0c);
if (!(r_str(ppb) & 0x80))
return 1;
retv = ppa_completion(cmd);
if (retv == -1)
return 0;
if (retv == 0)
return 1;
cmd->SCp.phase++;
case 6: /* Phase 6 - Read status/message */
cmd->result = DID_OK << 16;
/* Check for data overrun */
if (ppa_wait(host_no) != (unsigned char) 0xf0) {
ppa_fail(host_no, DID_ERROR);
return 0;
}
if (ppa_in(host_no, &l, 1)) { /* read status byte */
/* Check for optional message byte */
if (ppa_wait(host_no) == (unsigned char) 0xf0)
ppa_in(host_no, &h, 1);
cmd->result = (DID_OK << 16) + (h << 8) + (l & STATUS_MASK);
}
return 0; /* Finished */
break;
default:
printk("ppa: Invalid scsi phase\n");
}
return 0;
}
int ppa_queuecommand(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *))
{
int host_no = cmd->host->unique_id;
if (ppa_hosts[host_no].cur_cmd) {
printk("PPA: bug in ppa_queuecommand\n");
return 0;
}
ppa_hosts[host_no].failed = 0;
ppa_hosts[host_no].jstart = jiffies;
ppa_hosts[host_no].cur_cmd = cmd;
cmd->scsi_done = done;
cmd->result = DID_ERROR << 16; /* default return code */
cmd->SCp.phase = 0; /* bus free */
ppa_pb_claim(host_no);
ppa_hosts[host_no].ppa_tq.data = ppa_hosts + host_no;
ppa_hosts[host_no].ppa_tq.sync = 0;
queue_task(&ppa_hosts[host_no].ppa_tq, &tq_immediate);
mark_bh(IMMEDIATE_BH);
return 0;
}
/*
* Apparently the the disk->capacity attribute is off by 1 sector
* for all disk drives. We add the one here, but it should really
* be done in sd.c. Even if it gets fixed there, this will still
* work.
*/
int ppa_biosparam(Disk * disk, kdev_t dev, int ip[])
{
ip[0] = 0x40;
ip[1] = 0x20;
ip[2] = (disk->capacity + 1) / (ip[0] * ip[1]);
if (ip[2] > 1024) {
ip[0] = 0xff;
ip[1] = 0x3f;
ip[2] = (disk->capacity + 1) / (ip[0] * ip[1]);
if (ip[2] > 1023)
ip[2] = 1023;
}
return 0;
}
int ppa_abort(Scsi_Cmnd * cmd)
{
int host_no = cmd->host->unique_id;
/*
* There is no method for aborting commands since Iomega
* have tied the SCSI_MESSAGE line high in the interface
*/
switch (cmd->SCp.phase) {
case 0: /* Do not have access to parport */
case 1: /* Have not connected to interface */
ppa_hosts[host_no].cur_cmd = NULL; /* Forget the problem */
return SUCCESS;
break;
default: /* SCSI command sent, can not abort */
return FAILED;
break;
}
}
static void ppa_reset_pulse(unsigned int base)
{
w_dtr(base, 0x40);
w_ctr(base, 0x8);
udelay(30);
w_ctr(base, 0xc);
}
int ppa_reset(Scsi_Cmnd * cmd)
{
int host_no = cmd->host->unique_id;
if (cmd->SCp.phase)
ppa_disconnect(host_no);
ppa_hosts[host_no].cur_cmd = NULL; /* Forget the problem */
ppa_connect(host_no, CONNECT_NORMAL);
ppa_reset_pulse(PPA_BASE(host_no));
udelay(1000); /* device settle delay */
ppa_disconnect(host_no);
udelay(1000); /* device settle delay */
return SUCCESS;
}
static int device_check(int host_no)
{
/* This routine looks for a device and then attempts to use EPP
to send a command. If all goes as planned then EPP is available. */
static char cmd[6] =
{0x00, 0x00, 0x00, 0x00, 0x00, 0x00};
int loop, old_mode, status, k, ppb = PPA_BASE(host_no);
unsigned char l;
old_mode = ppa_hosts[host_no].mode;
for (loop = 0; loop < 8; loop++) {
/* Attempt to use EPP for Test Unit Ready */
if ((ppb & 0x0007) == 0x0000)
ppa_hosts[host_no].mode = PPA_EPP_32;
second_pass:
ppa_connect(host_no, CONNECT_EPP_MAYBE);
/* Select SCSI device */
if (!ppa_select(host_no, loop)) {
ppa_disconnect(host_no);
continue;
}
printk("ppa: Found device at ID %i, Attempting to use %s\n", loop,
PPA_MODE_STRING[ppa_hosts[host_no].mode]);
/* Send SCSI command */
status = 1;
w_ctr(ppb, 0x0c);
for (l = 0; (l < 6) && (status); l++)
status = ppa_out(host_no, cmd, 1);
if (!status) {
ppa_disconnect(host_no);
ppa_connect(host_no, CONNECT_EPP_MAYBE);
w_dtr(ppb, 0x40);
w_ctr(ppb, 0x08);
udelay(30);
w_ctr(ppb, 0x0c);
udelay(1000);
ppa_disconnect(host_no);
udelay(1000);
if (ppa_hosts[host_no].mode == PPA_EPP_32) {
ppa_hosts[host_no].mode = old_mode;
goto second_pass;
}
printk("ppa: Unable to establish communication, aborting driver load.\n");
return 1;
}
w_ctr(ppb, 0x0c);
k = 1000000; /* 1 Second */
do {
l = r_str(ppb);
k--;
udelay(1);
} while (!(l & 0x80) && (k));
l &= 0xf0;
if (l != 0xf0) {
ppa_disconnect(host_no);
ppa_connect(host_no, CONNECT_EPP_MAYBE);
ppa_reset_pulse(ppb);
udelay(1000);
ppa_disconnect(host_no);
udelay(1000);
if (ppa_hosts[host_no].mode == PPA_EPP_32) {
ppa_hosts[host_no].mode = old_mode;
goto second_pass;
}
printk("ppa: Unable to establish communication, aborting driver load.\n");
return 1;
}
ppa_disconnect(host_no);
printk("ppa: Communication established with ID %i using %s\n", loop,
PPA_MODE_STRING[ppa_hosts[host_no].mode]);
ppa_connect(host_no, CONNECT_EPP_MAYBE);
ppa_reset_pulse(ppb);
udelay(1000);
ppa_disconnect(host_no);
udelay(1000);
return 0;
}
printk("ppa: No devices found, aborting driver load.\n");
return 1;
}
MODULE_LICENSE("GPL");
|