Viewing file:  pluto.h (1.5 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* pluto.h: SparcSTORAGE Array SCSI host adapter driver definitions.
*
* Copyright (C) 1997 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
*/
#ifndef _PLUTO_H
#define _PLUTO_H
#include "../fc4/fcp_impl.h"
struct pluto {
/* This must be first */
fc_channel *fc;
char rev_str[5];
char fw_rev_str[5];
char serial_str[13];
};
struct pluto_inquiry {
u8 dtype;
u8 removable:1, qualifier:7;
u8 iso:2, ecma:3, ansi:3;
u8 aenc:1, trmiop:1, :2, rdf:4;
u8 len;
u8 xxx1;
u8 xxx2;
u8 reladdr:1, wbus32:1, wbus16:1, sync:1, linked:1, :1, cmdque:1, softreset:1;
u8 vendor_id[8];
u8 product_id[16];
u8 revision[4];
u8 fw_revision[4];
u8 serial[12];
u8 xxx3[2];
u8 channels;
u8 targets;
};
/* This is the max number of outstanding SCSI commands per pluto */
#define PLUTO_CAN_QUEUE 254
int pluto_detect(Scsi_Host_Template *);
int pluto_release(struct Scsi_Host *);
const char * pluto_info(struct Scsi_Host *);
#define PLUTO { \
name: "Sparc Storage Array 100/200", \
detect: pluto_detect, \
release: pluto_release, \
info: pluto_info, \
queuecommand: fcp_scsi_queuecommand, \
can_queue: PLUTO_CAN_QUEUE, \
this_id: -1, \
sg_tablesize: 1, \
cmd_per_lun: 1, \
use_clustering: ENABLE_CLUSTERING, \
use_new_eh_code: FCP_SCSI_USE_NEW_EH_CODE, \
abort: fcp_old_abort, \
eh_abort_handler: fcp_scsi_abort, \
eh_device_reset_handler:fcp_scsi_dev_reset, \
eh_bus_reset_handler: fcp_scsi_bus_reset, \
eh_host_reset_handler: fcp_scsi_host_reset, \
}
#endif /* !(_PLUTO_H) */
|