Viewing file:  ini9100u.h (9.92 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/**************************************************************************
* Initio 9100 device driver for Linux.
*
* Copyright (c) 1994-1998 Initio Corporation
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
* --------------------------------------------------------------------------
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification, immediately at the beginning of the file.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
* 3. The name of the author may not be used to endorse or promote products
* derived from this software without specific prior written permission.
*
* Where this Software is combined with software released under the terms of
* the GNU General Public License ("GPL") and the terms of the GPL would require the
* combined work to also be released under the terms of the GPL, the terms
* and conditions of this License will apply in addition to those of the
* GPL with the exception of any terms or conditions of this License that
* conflict with, or are expressly prohibited by, the GPL.
*
* THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
* ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR
* ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
* LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
* OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
* SUCH DAMAGE.
*
*************************************************************************
*
* Module: ini9100u.h
* Description: INI-9100U/UW LINUX device driver header
* Revision History:
* 06/18/96 Harry Chen, Initial Version 1.00A (Beta)
* 06/23/98 hc - v1.01k
* - Get it work for kernel version >= 2.1.75
* 12/09/98 bv - v1.03a
* - Removed unused code
* 12/13/98 bv - v1.03b
* - Add spinlocks to HCS structure.
* 21/01/99 bv - v1.03e
* - Added PCI_ID structure
**************************************************************************/
#ifndef CVT_LINUX_VERSION
#define CVT_LINUX_VERSION(V,P,S) (((V) * 65536) + ((P) * 256) + (S))
#endif
#ifndef LINUX_VERSION_CODE
#include <linux/version.h>
#endif
#include <linux/types.h>
#include "sd.h"
extern int i91u_detect(Scsi_Host_Template *);
extern int i91u_release(struct Scsi_Host *);
extern int i91u_command(Scsi_Cmnd *);
extern int i91u_queue(Scsi_Cmnd *, void (*done) (Scsi_Cmnd *));
extern int i91u_abort(Scsi_Cmnd *);
extern int i91u_reset(Scsi_Cmnd *, unsigned int);
extern int i91u_biosparam(Scsi_Disk *, kdev_t, int *); /*for linux v2.0 */
#define i91u_REVID "Initio INI-9X00U/UW SCSI device driver; Revision: 1.03g"
#define INI9100U { \
next: NULL, \
module: NULL, \
proc_name: "INI9100U", \
proc_info: NULL, \
name: i91u_REVID, \
detect: i91u_detect, \
release: i91u_release, \
info: NULL, \
command: i91u_command, \
queuecommand: i91u_queue, \
eh_strategy_handler: NULL, \
eh_abort_handler: NULL, \
eh_device_reset_handler: NULL, \
eh_bus_reset_handler: NULL, \
eh_host_reset_handler: NULL, \
abort: i91u_abort, \
reset: i91u_reset, \
slave_attach: NULL, \
bios_param: i91u_biosparam, \
can_queue: 1, \
this_id: 1, \
sg_tablesize: SG_ALL, \
cmd_per_lun: 1, \
present: 0, \
unchecked_isa_dma: 0, \
use_clustering: ENABLE_CLUSTERING, \
use_new_eh_code: 0 \
}
#define VIRT_TO_BUS(i) (unsigned int) virt_to_bus((void *)(i))
#define ULONG unsigned long
#define USHORT unsigned short
#define UCHAR unsigned char
#define BYTE u8
#define WORD unsigned short
#define DWORD unsigned long
#define UBYTE u8
#define UWORD unsigned short
#define UDWORD unsigned long
#define U32 u32
#ifndef NULL
#define NULL 0 /* zero */
#endif
#ifndef TRUE
#define TRUE (1) /* boolean true */
#endif
#ifndef FALSE
#define FALSE (0) /* boolean false */
#endif
#ifndef FAILURE
#define FAILURE (-1)
#endif
#define i91u_MAXQUEUE 2
#define TOTAL_SG_ENTRY 32
#define MAX_TARGETS 16
#define SENSE_SIZE 14
#define INI_VENDOR_ID 0x1101 /* Initio's PCI vendor ID */
#define DMX_VENDOR_ID 0x134a /* Domex's PCI vendor ID */
#define I950_DEVICE_ID 0x9500 /* Initio's inic-950 product ID */
#define I940_DEVICE_ID 0x9400 /* Initio's inic-940 product ID */
#define I935_DEVICE_ID 0x9401 /* Initio's inic-935 product ID */
#define I920_DEVICE_ID 0x0002 /* Initio's other product ID */
/************************************************************************/
/* Vendor ID/Device ID Pair Structure */
/************************************************************************/
typedef struct PCI_ID_Struc {
unsigned short vendor_id;
unsigned short device_id;
} PCI_ID;
/************************************************************************/
/* Scatter-Gather Element Structure */
/************************************************************************/
typedef struct SG_Struc {
U32 SG_Ptr; /* Data Pointer */
U32 SG_Len; /* Data Length */
} SG;
/***********************************************************************
SCSI Control Block
************************************************************************/
typedef struct Scsi_Ctrl_Blk {
U32 SCB_InitioReserved[9]; /* 0 */
UBYTE SCB_Opcode; /*24 SCB command code */
UBYTE SCB_Flags; /*25 SCB Flags */
UBYTE SCB_Target; /*26 Target Id */
UBYTE SCB_Lun; /*27 Lun */
U32 SCB_BufPtr; /*28 Data Buffer Pointer */
U32 SCB_BufLen; /*2C Data Allocation Length */
UBYTE SCB_SGLen; /*30 SG list # */
UBYTE SCB_SenseLen; /*31 Sense Allocation Length */
UBYTE SCB_HaStat; /*32 */
UBYTE SCB_TaStat; /*33 */
UBYTE SCB_CDBLen; /*34 CDB Length */
UBYTE SCB_Ident; /*35 Identify */
UBYTE SCB_TagMsg; /*36 Tag Message */
UBYTE SCB_TagId; /*37 Queue Tag */
UBYTE SCB_CDB[12]; /*38 */
U32 SCB_SGPAddr; /*44 SG List/Sense Buf phy. Addr. */
U32 SCB_SensePtr; /*48 Sense data pointer */
void (*SCB_Post) (BYTE *, BYTE *); /*4C POST routine */
Scsi_Cmnd *SCB_Srb; /*50 SRB Pointer */
SG SCB_SGList[TOTAL_SG_ENTRY]; /*54 Start of SG list */
} SCB;
/* Opcodes of SCB_Opcode */
#define ExecSCSI 0x1
#define BusDevRst 0x2
#define AbortCmd 0x3
/* Bit Definition for SCB_Flags */
#define SCF_DONE 0x01
#define SCF_POST 0x02
#define SCF_SENSE 0x04
#define SCF_DIR 0x18
#define SCF_NO_DCHK 0x00
#define SCF_DIN 0x08
#define SCF_DOUT 0x10
#define SCF_NO_XF 0x18
#define SCF_POLL 0x40
#define SCF_SG 0x80
/* Error Codes for SCB_HaStat */
#define HOST_SEL_TOUT 0x11
#define HOST_DO_DU 0x12
#define HOST_BUS_FREE 0x13
#define HOST_BAD_PHAS 0x14
#define HOST_INV_CMD 0x16
#define HOST_SCSI_RST 0x1B
#define HOST_DEV_RST 0x1C
/* Error Codes for SCB_TaStat */
#define TARGET_CHKCOND 0x02
#define TARGET_BUSY 0x08
/* Queue tag msg: Simple_quque_tag, Head_of_queue_tag, Ordered_queue_tag */
#define MSG_STAG 0x20
#define MSG_HTAG 0x21
#define MSG_OTAG 0x22
/***********************************************************************
Target Device Control Structure
**********************************************************************/
typedef struct Tar_Ctrl_Struc {
ULONG TCS_InitioReserved; /* 0 */
UWORD TCS_DrvFlags; /* 4 */
UBYTE TCS_DrvHead; /* 6 */
UBYTE TCS_DrvSector; /* 7 */
} TCS;
/***********************************************************************
Target Device Control Structure
**********************************************************************/
/* Bit Definition for TCF_DrvFlags */
#define TCF_DRV_255_63 0x0400
/***********************************************************************
Host Adapter Control Structure
************************************************************************/
typedef struct Ha_Ctrl_Struc {
UWORD HCS_Base; /* 00 */
UWORD HCS_BIOS; /* 02 */
UBYTE HCS_Intr; /* 04 */
UBYTE HCS_SCSI_ID; /* 05 */
UBYTE HCS_MaxTar; /* 06 */
UBYTE HCS_NumScbs; /* 07 */
UBYTE HCS_Flags; /* 08 */
UBYTE HCS_Index; /* 09 */
UBYTE HCS_Reserved[2]; /* 0a */
ULONG HCS_InitioReserved[27]; /* 0C */
TCS HCS_Tcs[16]; /* 78 -> 16 Targets */
Scsi_Cmnd *pSRB_head; /* SRB save queue header */
Scsi_Cmnd *pSRB_tail; /* SRB save queue tail */
spinlock_t HCS_AvailLock;
spinlock_t HCS_SemaphLock;
spinlock_t pSRB_lock;
struct pci_dev *pci_dev;
} HCS;
/* Bit Definition for HCB_Flags */
#define HCF_EXPECT_RESET 0x10
/* SCSI related definition */
#define DISC_NOT_ALLOW 0x80 /* Disconnect is not allowed */
#define DISC_ALLOW 0xC0 /* Disconnect is allowed */
|