Viewing file:  amiga7xx.c (4.13 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* Detection routine for the NCR53c710 based Amiga SCSI Controllers for Linux.
* Amiga MacroSystemUS WarpEngine SCSI controller.
* Amiga Technologies A4000T SCSI controller.
* Amiga Technologies/DKB A4091 SCSI controller.
*
* Written 1997 by Alan Hourihane <alanh@fairlite.demon.co.uk>
* plus modifications of the 53c7xx.c driver to support the Amiga.
*/
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/blk.h>
#include <linux/sched.h>
#include <linux/version.h>
#include <linux/config.h>
#include <linux/zorro.h>
#include <asm/setup.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/amigaints.h>
#include <asm/amigahw.h>
#include <asm/irq.h>
#include "scsi.h"
#include "hosts.h"
#include "53c7xx.h"
#include "amiga7xx.h"
#include<linux/stat.h>
extern int ncr53c7xx_init (Scsi_Host_Template *tpnt, int board, int chip,
u32 base, int io_port, int irq, int dma,
long long options, int clock);
int __init amiga7xx_detect(Scsi_Host_Template *tpnt)
{
static unsigned char called = 0;
int num = 0, clock;
long long options;
struct zorro_dev *z = NULL;
unsigned long address;
if (called || !MACH_IS_AMIGA)
return 0;
tpnt->proc_name = "Amiga7xx";
#ifdef CONFIG_A4000T_SCSI
if (AMIGAHW_PRESENT(A4000_SCSI)) {
address = 0xdd0040;
if (request_mem_region(address, 0x1000, "ncr53c710")) {
address = ZTWO_VADDR(address);
options = OPTION_MEMORY_MAPPED | OPTION_DEBUG_TEST1 |
OPTION_INTFLY | OPTION_SYNCHRONOUS |
OPTION_ALWAYS_SYNCHRONOUS | OPTION_DISCONNECT;
clock = 50000000; /* 50MHz SCSI Clock */
ncr53c7xx_init(tpnt, 0, 710, address, 0, IRQ_AMIGA_PORTS, DMA_NONE,
options, clock);
num++;
}
}
#endif
while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
unsigned long address = z->resource.start;
unsigned long size = z->resource.end-z->resource.start+1;
switch (z->id) {
#ifdef CONFIG_BLZ603EPLUS_SCSI
case ZORRO_PROD_PHASE5_BLIZZARD_603E_PLUS:
address = 0xf40000;
if (request_mem_region(address, 0x1000, "ncr53c710")) {
address = ZTWO_VADDR(address);
options = OPTION_MEMORY_MAPPED | OPTION_DEBUG_TEST1 |
OPTION_INTFLY | OPTION_SYNCHRONOUS |
OPTION_ALWAYS_SYNCHRONOUS | OPTION_DISCONNECT;
clock = 50000000; /* 50MHz SCSI Clock */
ncr53c7xx_init(tpnt, 0, 710, address, 0, IRQ_AMIGA_PORTS,
DMA_NONE, options, clock);
num++;
}
break;
#endif
#ifdef CONFIG_WARPENGINE_SCSI
case ZORRO_PROD_MACROSYSTEMS_WARP_ENGINE_40xx:
if (request_mem_region(address+0x40000, 0x1000, "ncr53c710")) {
address = (unsigned long)ioremap(address, size);
options = OPTION_MEMORY_MAPPED | OPTION_DEBUG_TEST1 |
OPTION_INTFLY | OPTION_SYNCHRONOUS |
OPTION_ALWAYS_SYNCHRONOUS | OPTION_DISCONNECT;
clock = 50000000; /* 50MHz SCSI Clock */
ncr53c7xx_init(tpnt, 0, 710, address+0x40000, 0,
IRQ_AMIGA_PORTS, DMA_NONE, options, clock);
num++;
}
break;
#endif
#ifdef CONFIG_A4091_SCSI
case ZORRO_PROD_CBM_A4091_1:
case ZORRO_PROD_CBM_A4091_2:
if (request_mem_region(address+0x800000, 0x1000, "ncr53c710")) {
address = (unsigned long)ioremap(address, size);
options = OPTION_MEMORY_MAPPED | OPTION_DEBUG_TEST1 |
OPTION_INTFLY | OPTION_SYNCHRONOUS |
OPTION_ALWAYS_SYNCHRONOUS | OPTION_DISCONNECT;
clock = 50000000; /* 50MHz SCSI Clock */
ncr53c7xx_init(tpnt, 0, 710, address+0x800000, 0,
IRQ_AMIGA_PORTS, DMA_NONE, options, clock);
num++;
}
break;
#endif
#ifdef CONFIG_GVP_TURBO_SCSI
case ZORRO_PROD_GVP_GFORCE_040_060:
if (request_mem_region(address+0x40000, 0x1000, "ncr53c710")) {
address = ZTWO_VADDR(address);
options = OPTION_MEMORY_MAPPED | OPTION_DEBUG_TEST1 |
OPTION_INTFLY | OPTION_SYNCHRONOUS |
OPTION_ALWAYS_SYNCHRONOUS | OPTION_DISCONNECT;
clock = 50000000; /* 50MHz SCSI Clock */
ncr53c7xx_init(tpnt, 0, 710, address+0x40000, 0,
IRQ_AMIGA_PORTS, DMA_NONE, options, clock);
num++;
}
#endif
}
}
called = 1;
return num;
}
static Scsi_Host_Template driver_template = AMIGA7XX_SCSI;
#include "scsi_module.c"
|