Viewing file:  AM53C974.h (3.23 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* AM53/79C974 (PCscsi) driver release 0.5
* The architecture and much of the code of this device
* driver was originally developed by Drew Eckhardt for
* the NCR5380. The following copyrights apply:
* For the architecture and all parts similar to the NCR5380:
* Copyright 1993, Drew Eckhardt
* Visionary Computing
* (Unix and Linux consulting and custom programming)
* drew@colorado.edu
* +1 (303) 666-5836
*
* The AM53C974_nobios_detect code was originally developed by
* Robin Cutshaw (robin@xfree86.org) and is used here in a
* modified form.
*
* For the other parts:
* Copyright 1994, D. Frieauff
* EMail: fri@rsx42sun0.dofn.de
* Phone: x49-7545-8-2256 , x49-7541-42305
*/
/*
* $Log: AM53C974.h,v $
*/
#ifndef AM53C974_H
#define AM53C974_H
#include <scsi/scsicam.h>
struct AM53C974_hostdata {
volatile unsigned in_reset:1; /* flag, says bus reset pending */
volatile unsigned aborted:1; /* flag, says aborted */
volatile unsigned selecting:1; /* selection started, but not yet finished */
volatile unsigned disconnecting: 1; /* disconnection started, but not yet finished */
volatile unsigned dma_busy:1; /* dma busy when service request for info transfer received */
volatile unsigned char msgout[10]; /* message to output in MSGOUT_PHASE */
volatile unsigned char last_message[10]; /* last message OUT */
volatile Scsi_Cmnd *issue_queue; /* waiting to be issued */
volatile Scsi_Cmnd *disconnected_queue; /* waiting for reconnect */
volatile Scsi_Cmnd *sel_cmd; /* command for selection */
volatile Scsi_Cmnd *connected; /* currently connected command */
volatile unsigned char busy[8]; /* index = target, bit = lun */
unsigned char sync_per[8]; /* synchronous transfer period (in effect) */
unsigned char sync_off[8]; /* synchronous offset (in effect) */
unsigned char sync_neg[8]; /* sync. negotiation performed (in effect) */
unsigned char sync_en[8]; /* sync. negotiation performed (in effect) */
unsigned char max_rate[8]; /* max. transfer rate (setup) */
unsigned char max_offset[8]; /* max. sync. offset (setup), only valid if corresponding sync_en is nonzero */
};
#define AM53C974 { \
proc_name: "am53c974", \
name: "AM53C974", \
detect: AM53C974_pci_detect, \
release: AM53C974_release, \
info: AM53C974_info, \
command: AM53C974_command, \
queuecommand: AM53C974_queue_command, \
abort: AM53C974_abort, \
reset: AM53C974_reset, \
bios_param: scsicam_bios_param, \
can_queue: 12, \
this_id: -1, \
sg_tablesize: SG_ALL, \
cmd_per_lun: 1, \
use_clustering: DISABLE_CLUSTERING \
}
static int AM53C974_pci_detect(Scsi_Host_Template * tpnt);
static int AM53C974_release(struct Scsi_Host *shp);
static const char *AM53C974_info(struct Scsi_Host *);
static int AM53C974_command(Scsi_Cmnd * SCpnt);
static int AM53C974_queue_command(Scsi_Cmnd * cmd, void (*done) (Scsi_Cmnd *));
static int AM53C974_abort(Scsi_Cmnd * cmd);
static int AM53C974_reset(Scsi_Cmnd * cmd, unsigned int);
#endif /* AM53C974_H */
|