Viewing file:  aic7xxx_linux.c (78.71 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* Adaptec AIC7xxx device driver for Linux.
*
* $Id: //depot/aic7xxx/linux/drivers/scsi/aic7xxx/aic7xxx_linux.c#79 $
*
* Copyright (c) 1994 John Aycock
* The University of Calgary Department of Computer Science.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2, or (at your option)
* any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; see the file COPYING. If not, write to
* the Free Software Foundation, 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Sources include the Adaptec 1740 driver (aha1740.c), the Ultrastor 24F
* driver (ultrastor.c), various Linux kernel source, the Adaptec EISA
* config file (!adp7771.cfg), the Adaptec AHA-2740A Series User's Guide,
* the Linux Kernel Hacker's Guide, Writing a SCSI Device Driver for Linux,
* the Adaptec 1542 driver (aha1542.c), the Adaptec EISA overlay file
* (adp7770.ovl), the Adaptec AHA-2740 Series Technical Reference Manual,
* the Adaptec AIC-7770 Data Book, the ANSI SCSI specification, the
* ANSI SCSI-2 specification (draft 10c), ...
*
* --------------------------------------------------------------------------
*
* Modifications by Daniel M. Eischen (deischen@iworks.InterWorks.org):
*
* Substantially modified to include support for wide and twin bus
* adapters, DMAing of SCBs, tagged queueing, IRQ sharing, bug fixes,
* SCB paging, and other rework of the code.
*
* --------------------------------------------------------------------------
* Copyright (c) 1994-2000 Justin T. Gibbs.
* Copyright (c) 2000-2001 Adaptec Inc.
* All rights reserved.
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions, and the following disclaimer,
* without modification.
* 2. Redistributions in binary form must reproduce at minimum a disclaimer
* substantially similar to the "NO WARRANTY" disclaimer below
* ("Disclaimer") and any redistribution must be conditioned upon
* including a substantially similar Disclaimer requirement for further
* binary redistribution.
* 3. Neither the names of the above-listed copyright holders nor the names
* of any contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* Alternatively, this software may be distributed under the terms of the
* GNU General Public License ("GPL") version 2 as published by the Free
* Software Foundation.
*
* NO WARRANTY
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
* OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
* HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
* STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
* IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGES.
*
*---------------------------------------------------------------------------
*
* Thanks also go to (in alphabetical order) the following:
*
* Rory Bolt - Sequencer bug fixes
* Jay Estabrook - Initial DEC Alpha support
* Doug Ledford - Much needed abort/reset bug fixes
* Kai Makisara - DMAing of SCBs
*
* A Boot time option was also added for not resetting the scsi bus.
*
* Form: aic7xxx=extended
* aic7xxx=no_reset
* aic7xxx=verbose
*
* Daniel M. Eischen, deischen@iworks.InterWorks.org, 1/23/97
*
* Id: aic7xxx.c,v 4.1 1997/06/12 08:23:42 deang Exp
*/
/*
* Further driver modifications made by Doug Ledford <dledford@redhat.com>
*
* Copyright (c) 1997-1999 Doug Ledford
*
* These changes are released under the same licensing terms as the FreeBSD
* driver written by Justin Gibbs. Please see his Copyright notice above
* for the exact terms and conditions covering my changes as well as the
* warranty statement.
*
* Modifications made to the aic7xxx.c,v 4.1 driver from Dan Eischen include
* but are not limited to:
*
* 1: Import of the latest FreeBSD sequencer code for this driver
* 2: Modification of kernel code to accomodate different sequencer semantics
* 3: Extensive changes throughout kernel portion of driver to improve
* abort/reset processing and error hanndling
* 4: Other work contributed by various people on the Internet
* 5: Changes to printk information and verbosity selection code
* 6: General reliability related changes, especially in IRQ management
* 7: Modifications to the default probe/attach order for supported cards
* 8: SMP friendliness has been improved
*
*/
#include "aic7xxx_osm.h"
#include "aic7xxx_inline.h"
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,0)
#include <linux/init.h> /* __setup */
#endif
#include "../sd.h" /* For geometry detection */
#include <linux/mm.h> /* For fetching system memory size */
#include <linux/blk.h>
/*
* To generate the correct addresses for the controller to issue
* on the bus. Originally added for DEC Alpha support.
*/
#define VIRT_TO_BUS(a) (uint32_t)virt_to_bus((void *)(a))
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0)
struct proc_dir_entry proc_scsi_aic7xxx = {
PROC_SCSI_AIC7XXX, 7, "aic7xxx",
S_IFDIR | S_IRUGO | S_IXUGO, 2,
0, 0, 0, NULL, NULL, NULL, NULL, NULL, NULL, NULL
};
#endif
/*
* Set this to the delay in seconds after SCSI bus reset.
* Note, we honor this only for the initial bus reset.
* The scsi error recovery code performs its own bus settle
* delay handling for error recovery actions.
*/
#ifdef CONFIG_AIC7XXX_RESET_DELAY_MS
#define AIC7XXX_RESET_DELAY CONFIG_AIC7XXX_RESET_DELAY_MS
#else
#define AIC7XXX_RESET_DELAY 5000
#endif
/*
* Control collection of SCSI transfer statistics for the /proc filesystem.
*
* NOTE: Do NOT enable this when running on kernels version 1.2.x and below.
* NOTE: This does affect performance since it has to maintain statistics.
*/
#ifdef CONFIG_AIC7XXX_PROC_STATS
#define AIC7XXX_PROC_STATS
#endif
/*
* To change the default number of tagged transactions allowed per-device,
* add a line to the lilo.conf file like:
* append="aic7xxx=verbose,tag_info:{{32,32,32,32},{32,32,32,32}}"
* which will result in the first four devices on the first two
* controllers being set to a tagged queue depth of 32.
*
* The tag_commands is an array of 16 to allow for wide and twin adapters.
* Twin adapters will use indexes 0-7 for channel 0, and indexes 8-15
* for channel 1.
*/
typedef struct {
uint8_t tag_commands[16]; /* Allow for wide/twin adapters. */
} adapter_tag_info_t;
/*
* Modify this as you see fit for your system.
*
* 0 tagged queuing disabled
* 1 <= n <= 253 n == max tags ever dispatched.
*
* The driver will throttle the number of commands dispatched to a
* device if it returns queue full. For devices with a fixed maximum
* queue depth, the driver will eventually determine this depth and
* lock it in (a console message is printed to indicate that a lock
* has occurred). On some devices, queue full is returned for a temporary
* resource shortage. These devices will return queue full at varying
* depths. The driver will throttle back when the queue fulls occur and
* attempt to slowly increase the depth over time as the device recovers
* from the resource shortage.
*
* In this example, the first line will disable tagged queueing for all
* the devices on the first probed aic7xxx adapter.
*
* The second line enables tagged queueing with 4 commands/LUN for IDs
* (0, 2-11, 13-15), disables tagged queueing for ID 12, and tells the
* driver to attempt to use up to 64 tags for ID 1.
*
* The third line is the same as the first line.
*
* The fourth line disables tagged queueing for devices 0 and 3. It
* enables tagged queueing for the other IDs, with 16 commands/LUN
* for IDs 1 and 4, 127 commands/LUN for ID 8, and 4 commands/LUN for
* IDs 2, 5-7, and 9-15.
*/
/*
* NOTE: The below structure is for reference only, the actual structure
* to modify in order to change things is just below this comment block.
adapter_tag_info_t aic7xxx_tag_info[] =
{
{{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
{{4, 64, 4, 4, 4, 4, 4, 4, 4, 4, 4, 4, 0, 4, 4, 4}},
{{0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0}},
{{0, 16, 4, 0, 16, 4, 4, 4, 127, 4, 4, 4, 4, 4, 4, 4}}
};
*/
#ifdef CONFIG_AIC7XXX_CMDS_PER_DEVICE
#define AIC7XXX_CMDS_PER_DEVICE CONFIG_AIC7XXX_CMDS_PER_DEVICE
#else
#define AIC7XXX_CMDS_PER_DEVICE AHC_MAX_QUEUE
#endif
#define AIC7XXX_CONFIGED_TAG_COMMANDS { \
AIC7XXX_CMDS_PER_DEVICE, AIC7XXX_CMDS_PER_DEVICE, \
AIC7XXX_CMDS_PER_DEVICE, AIC7XXX_CMDS_PER_DEVICE, \
AIC7XXX_CMDS_PER_DEVICE, AIC7XXX_CMDS_PER_DEVICE, \
AIC7XXX_CMDS_PER_DEVICE, AIC7XXX_CMDS_PER_DEVICE, \
AIC7XXX_CMDS_PER_DEVICE, AIC7XXX_CMDS_PER_DEVICE, \
AIC7XXX_CMDS_PER_DEVICE, AIC7XXX_CMDS_PER_DEVICE, \
AIC7XXX_CMDS_PER_DEVICE, AIC7XXX_CMDS_PER_DEVICE, \
AIC7XXX_CMDS_PER_DEVICE, AIC7XXX_CMDS_PER_DEVICE \
}
/*
* By default, use the number of commands specified by
* the users kernel configuration.
*/
static adapter_tag_info_t aic7xxx_tag_info[] =
{
{AIC7XXX_CONFIGED_TAG_COMMANDS},
{AIC7XXX_CONFIGED_TAG_COMMANDS},
{AIC7XXX_CONFIGED_TAG_COMMANDS},
{AIC7XXX_CONFIGED_TAG_COMMANDS},
{AIC7XXX_CONFIGED_TAG_COMMANDS},
{AIC7XXX_CONFIGED_TAG_COMMANDS},
{AIC7XXX_CONFIGED_TAG_COMMANDS},
{AIC7XXX_CONFIGED_TAG_COMMANDS},
{AIC7XXX_CONFIGED_TAG_COMMANDS},
{AIC7XXX_CONFIGED_TAG_COMMANDS},
{AIC7XXX_CONFIGED_TAG_COMMANDS},
{AIC7XXX_CONFIGED_TAG_COMMANDS},
{AIC7XXX_CONFIGED_TAG_COMMANDS},
{AIC7XXX_CONFIGED_TAG_COMMANDS},
{AIC7XXX_CONFIGED_TAG_COMMANDS},
{AIC7XXX_CONFIGED_TAG_COMMANDS}
};
/*
* There should be a specific return value for this in scsi.h, but
* it seems that most drivers ignore it.
*/
#define DID_UNDERFLOW DID_ERROR
void
ahc_print_path(struct ahc_softc *ahc, struct scb *scb)
{
printk("(scsi%d:%c:%d:%d): ",
ahc->platform_data->host->host_no,
scb != NULL ? SCB_GET_CHANNEL(ahc, scb) : 'X',
scb != NULL ? SCB_GET_TARGET(ahc, scb) : -1,
scb != NULL ? SCB_GET_LUN(scb) : -1);
}
/*
* XXX - these options apply unilaterally to _all_ 274x/284x/294x
* cards in the system. This should be fixed. Exceptions to this
* rule are noted in the comments.
*/
/*
* Skip the scsi bus reset. Non 0 make us skip the reset at startup. This
* has no effect on any later resets that might occur due to things like
* SCSI bus timeouts.
*/
static uint32_t aic7xxx_no_reset;
/*
* Certain PCI motherboards will scan PCI devices from highest to lowest,
* others scan from lowest to highest, and they tend to do all kinds of
* strange things when they come into contact with PCI bridge chips. The
* net result of all this is that the PCI card that is actually used to boot
* the machine is very hard to detect. Most motherboards go from lowest
* PCI slot number to highest, and the first SCSI controller found is the
* one you boot from. The only exceptions to this are when a controller
* has its BIOS disabled. So, we by default sort all of our SCSI controllers
* from lowest PCI slot number to highest PCI slot number. We also force
* all controllers with their BIOS disabled to the end of the list. This
* works on *almost* all computers. Where it doesn't work, we have this
* option. Setting this option to non-0 will reverse the order of the sort
* to highest first, then lowest, but will still leave cards with their BIOS
* disabled at the very end. That should fix everyone up unless there are
* really strange cirumstances.
*/
static int aic7xxx_reverse_scan = 0;
/*
* Should we force EXTENDED translation on a controller.
* 0 == Use whatever is in the SEEPROM or default to off
* 1 == Use whatever is in the SEEPROM or default to on
*/
static uint32_t aic7xxx_extended = 0;
/*
* PCI bus parity checking of the Adaptec controllers. This is somewhat
* dubious at best. To my knowledge, this option has never actually
* solved a PCI parity problem, but on certain machines with broken PCI
* chipset configurations, it can generate tons of false error messages.
* It's included in the driver for completeness.
* 0 = Shut off PCI parity check
* -1 = Normal polarity pci parity checking
* 1 = reverse polarity pci parity checking
*
* NOTE: you can't actually pass -1 on the lilo prompt. So, to set this
* variable to -1 you would actually want to simply pass the variable
* name without a number. That will invert the 0 which will result in
* -1.
*/
static int aic7xxx_pci_parity = 0;
/*
* Certain newer motherboards have put new PCI based devices into the
* IO spaces that used to typically be occupied by VLB or EISA cards.
* This overlap can cause these newer motherboards to lock up when scanned
* for older EISA and VLB devices. Setting this option to non-0 will
* cause the driver to skip scanning for any VLB or EISA controllers and
* only support the PCI controllers. NOTE: this means that if the kernel
* os compiled with PCI support disabled, then setting this to non-0
* would result in never finding any devices :)
*/
int aic7xxx_no_probe;
/*
* aic7xxx_detect() has been run, so register all device arrivals
* immediately with the system rather than deferring to the sorted
* attachment performed by aic7xxx_detect().
*/
int aic7xxx_detect_complete;
/*
* So that we can set how long each device is given as a selection timeout.
* The table of values goes like this:
* 0 - 256ms
* 1 - 128ms
* 2 - 64ms
* 3 - 32ms
* We default to 256ms because some older devices need a longer time
* to respond to initial selection.
*/
static int aic7xxx_seltime = 0x00;
/*
* Certain devices do not perform any aging on commands. Should the
* device be saturated by commands in one portion of the disk, it is
* possible for transactions on far away sectors to never be serviced.
* To handle these devices, we can periodically send an ordered tag to
* force all outstanding transactions to be serviced prior to a new
* transaction.
*/
int aic7xxx_periodic_otag;
/*
* Module information and settable options.
*/
#ifdef MODULE
static char *aic7xxx = NULL;
/*
* Just in case someone uses commas to separate items on the insmod
* command line, we define a dummy buffer here to avoid having insmod
* write wild stuff into our code segment
*/
static char dummy_buffer[60] = "Please don't trounce on me insmod!!\n";
MODULE_AUTHOR("Maintainer: Justin T. Gibbs <gibbs@scsiguy.com>");
MODULE_DESCRIPTION("Adaptec Aic77XX/78XX SCSI Host Bus Adapter driver");
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,10)
MODULE_LICENSE("Dual BSD/GPL");
#endif
MODULE_PARM(aic7xxx, "s");
MODULE_PARM_DESC(aic7xxx, "period delimited, options string.
verbose Enable verbose/diagnostic logging
no_probe Disable EISA/VLB controller probing
no_reset Supress initial bus resets
extended Enable extended geometry on all controllers
periodic_otag Send an ordered tagged transaction periodically
to prevent tag starvation. This may be
required by some older disk drives/RAID arrays.
reverse_scan Sort PCI devices highest Bus/Slot to lowest
tag_info:<tag_str> Set per-target tag depth
seltime:<int> Selection Timeout(0/256ms,1/128ms,2/64ms,3/32ms)
Sample /etc/modules.conf line:
Enable verbose logging
Disable EISA/VLB probing
Set tag depth on Controller 2/Target 2 to 10 tags
Shorten the selection timeout to 128ms from its default of 256
options aic7xxx='\"verbose.no_probe.tag_info:{{}.{}.{..10}}.seltime:1\"'
");
#endif
static void ahc_linux_handle_scsi_status(struct ahc_softc *,
struct ahc_linux_device *,
struct scb *);
static void ahc_linux_filter_command(struct ahc_softc*, Scsi_Cmnd*,
struct scb*);
static void ahc_linux_sem_timeout(u_long arg);
static void ahc_linux_freeze_sim_queue(struct ahc_softc *ahc);
static void ahc_linux_release_sim_queue(u_long arg);
static int ahc_linux_queue_recovery_cmd(Scsi_Cmnd *cmd, scb_flag flag);
static void ahc_linux_initialize_scsi_bus(struct ahc_softc *ahc);
static void ahc_linux_select_queue_depth(struct Scsi_Host *host,
Scsi_Device *scsi_devs);
static void ahc_linux_device_queue_depth(struct ahc_softc *ahc,
Scsi_Device *device);
static struct ahc_linux_target* ahc_linux_alloc_target(struct ahc_softc*,
u_int, u_int);
static void ahc_linux_free_target(struct ahc_softc*,
struct ahc_linux_target*);
static struct ahc_linux_device* ahc_linux_alloc_device(struct ahc_softc*,
struct ahc_linux_target*,
u_int);
static void ahc_linux_free_device(struct ahc_softc*,
struct ahc_linux_device*);
static void ahc_linux_run_device_queue(struct ahc_softc*,
struct ahc_linux_device*);
static void ahc_linux_setup_tag_info(char *p, char *end);
static int ahc_linux_next_unit(void);
static int ahc_linux_halt(struct notifier_block *nb, u_long event, void *buf);
static __inline struct ahc_linux_device*
ahc_linux_get_device(struct ahc_softc *ahc, u_int channel,
u_int target, u_int lun, int alloc);
static __inline void ahc_linux_queue_cmd_complete(struct ahc_softc *ahc,
Scsi_Cmnd *cmd);
static __inline void ahc_linux_run_complete_queue(struct ahc_softc *ahc,
struct ahc_cmd *acmd);
static __inline void ahc_linux_check_device_queue(struct ahc_softc *ahc,
struct ahc_linux_device *dev);
static __inline void ahc_linux_sniff_command(struct ahc_softc*, Scsi_Cmnd*,
struct scb*);
static __inline void ahc_linux_unmap_scb(struct ahc_softc*, struct scb*);
static __inline int ahc_linux_map_seg(struct ahc_softc *ahc, struct scb *scb,
struct ahc_dma_seg *sg,
bus_addr_t addr, bus_size_t len);
static __inline struct ahc_linux_device*
ahc_linux_get_device(struct ahc_softc *ahc, u_int channel, u_int target,
u_int lun, int alloc)
{
struct ahc_linux_target *targ;
struct ahc_linux_device *dev;
u_int target_offset;
target_offset = target;
if (channel != 0)
target_offset += 8;
targ = ahc->platform_data->targets[target_offset];
if (targ == NULL) {
if (alloc != 0) {
targ = ahc_linux_alloc_target(ahc, channel, target);
if (targ == NULL)
return (NULL);
} else
return (NULL);
}
dev = targ->devices[lun];
if (dev == NULL && alloc != 0)
dev = ahc_linux_alloc_device(ahc, targ, lun);
return (dev);
}
static __inline void
ahc_linux_queue_cmd_complete(struct ahc_softc *ahc, Scsi_Cmnd *cmd)
{
/*
* Typically, the complete queue has very few entries
* queued to it before the queue is emptied by
* ahc_linux_run_complete_queue, so sorting the entries
* by generation number should be inexpensive.
* We perform the sort so that commands that complete
* with an error are retuned in the order origionally
* queued to the controller so that any subsequent retries
* are performed in order. The underlying ahc routines do
* not guarantee the order that aborted commands will be
* returned to us.
*/
struct ahc_completeq *completeq;
struct ahc_cmd *list_cmd;
struct ahc_cmd *acmd;
/*
* If we want the request requeued, make sure there
* are sufficent retries. In the old scsi error code,
* we used to be able to specify a result code that
* bypassed the retry count. Now we must use this
* hack.
*/
if (cmd->result == (CAM_REQUEUE_REQ << 16))
cmd->retries--;
completeq = &ahc->platform_data->completeq;
list_cmd = TAILQ_FIRST(completeq);
acmd = (struct ahc_cmd *)cmd;
while (list_cmd != NULL
&& acmd_scsi_cmd(list_cmd).serial_number
< acmd_scsi_cmd(acmd).serial_number)
list_cmd = TAILQ_NEXT(list_cmd, acmd_links.tqe);
if (list_cmd != NULL)
TAILQ_INSERT_BEFORE(list_cmd, acmd, acmd_links.tqe);
else
TAILQ_INSERT_TAIL(completeq, acmd, acmd_links.tqe);
}
static __inline void
ahc_linux_run_complete_queue(struct ahc_softc *ahc, struct ahc_cmd *acmd)
{
u_long done_flags;
ahc_done_lock(ahc, &done_flags);
while (acmd != NULL) {
Scsi_Cmnd *cmd;
cmd = &acmd_scsi_cmd(acmd);
acmd = TAILQ_NEXT(acmd, acmd_links.tqe);
cmd->host_scribble = NULL;
cmd->scsi_done(cmd);
}
ahc_done_unlock(ahc, &done_flags);
}
static __inline void
ahc_linux_check_device_queue(struct ahc_softc *ahc,
struct ahc_linux_device *dev)
{
if ((dev->flags & AHC_DEV_FREEZE_TIL_EMPTY) != 0
&& dev->active == 0) {
dev->flags &= ~AHC_DEV_FREEZE_TIL_EMPTY;
dev->qfrozen--;
}
if (TAILQ_FIRST(&dev->busyq) == NULL
|| dev->openings == 0 || dev->qfrozen != 0)
return;
ahc_linux_run_device_queue(ahc, dev);
}
static __inline void
ahc_linux_run_device_queues(struct ahc_softc *ahc)
{
struct ahc_linux_device *dev;
while ((ahc->flags & AHC_RESOURCE_SHORTAGE) == 0
&& ahc->platform_data->qfrozen == 0
&& (dev = TAILQ_FIRST(&ahc->platform_data->device_runq)) != NULL) {
TAILQ_REMOVE(&ahc->platform_data->device_runq, dev, links);
dev->flags &= ~AHC_DEV_ON_RUN_LIST;
ahc_linux_check_device_queue(ahc, dev);
}
}
static __inline void
ahc_linux_sniff_command(struct ahc_softc *ahc, Scsi_Cmnd *cmd, struct scb *scb)
{
/*
* Determine whether we care to filter
* information out of this command. If so,
* pass it on to ahc_linux_filter_command() for more
* heavy weight processing.
*/
if (cmd->cmnd[0] == INQUIRY)
ahc_linux_filter_command(ahc, cmd, scb);
}
static __inline void
ahc_linux_unmap_scb(struct ahc_softc *ahc, struct scb *scb)
{
Scsi_Cmnd *cmd;
cmd = scb->io_ctx;
ahc_sync_sglist(ahc, scb, BUS_DMASYNC_POSTWRITE);
if (cmd->use_sg != 0) {
struct scatterlist *sg;
sg = (struct scatterlist *)cmd->request_buffer;
pci_unmap_sg(ahc->dev_softc, sg, cmd->use_sg,
scsi_to_pci_dma_dir(cmd->sc_data_direction));
} else if (cmd->request_bufflen != 0) {
u_int32_t high_addr;
high_addr = ahc_le32toh(scb->sg_list[0].len)
& AHC_SG_HIGH_ADDR_MASK;
pci_unmap_single(ahc->dev_softc,
ahc_le32toh(scb->sg_list[0].addr)
| (((dma_addr_t)high_addr) << 8),
cmd->request_bufflen,
scsi_to_pci_dma_dir(cmd->sc_data_direction));
}
}
static __inline int
ahc_linux_map_seg(struct ahc_softc *ahc, struct scb *scb,
struct ahc_dma_seg *sg, bus_addr_t addr, bus_size_t len)
{
int consumed;
if ((scb->sg_count + 1) > AHC_NSEG)
panic("Too few segs for dma mapping. "
"Increase AHC_NSEG\n");
consumed = 1;
sg->addr = ahc_htole32(addr & 0xFFFFFFFF);
scb->platform_data->xfer_len += len;
if (sizeof(bus_addr_t) > 4
&& (ahc->flags & AHC_39BIT_ADDRESSING) != 0) {
/*
* Due to DAC restrictions, we can't
* cross a 4GB boundary.
*/
if ((addr ^ (addr + len - 1)) & ~0xFFFFFFFF) {
struct ahc_dma_seg *next_sg;
uint32_t next_len;
printf("Crossed Seg\n");
if ((scb->sg_count + 2) > AHC_NSEG)
panic("Too few segs for dma mapping. "
"Increase AHC_NSEG\n");
consumed++;
next_sg = sg + 1;
next_sg->addr = 0;
next_len = 0x100000000 - (addr & 0xFFFFFFFF);
len -= next_len;
next_len |= ((addr >> 8) + 0x1000000) & 0x7F000000;
next_sg->len = ahc_htole32(next_len);
}
len |= (addr >> 8) & 0x7F000000;
}
sg->len = ahc_htole32(len);
return (consumed);
}
/************************ Shutdown/halt/reboot hook ***************************/
#include <linux/notifier.h>
#include <linux/reboot.h>
static struct notifier_block ahc_linux_notifier = {
ahc_linux_halt, NULL, 0
};
static int ahc_linux_halt(struct notifier_block *nb, u_long event, void *buf)
{
struct ahc_softc *ahc;
if (event == SYS_DOWN || event == SYS_HALT) {
TAILQ_FOREACH(ahc, &ahc_tailq, links) {
ahc_shutdown(ahc);
}
}
return (NOTIFY_OK);
}
/******************************** Macros **************************************/
#define BUILD_SCSIID(ahc, cmd) \
((((cmd)->target << TID_SHIFT) & TID) \
| (((cmd)->channel == 0) ? (ahc)->our_id : (ahc)->our_id_b) \
| (((cmd)->channel == 0) ? 0 : TWIN_CHNLB))
/******************************** Bus DMA *************************************/
int
ahc_dma_tag_create(struct ahc_softc *ahc, bus_dma_tag_t parent,
bus_size_t alignment, bus_size_t boundary,
bus_addr_t lowaddr, bus_addr_t highaddr,
bus_dma_filter_t *filter, void *filterarg,
bus_size_t maxsize, int nsegments,
bus_size_t maxsegsz, int flags, bus_dma_tag_t *ret_tag)
{
bus_dma_tag_t dmat;
dmat = malloc(sizeof(*dmat), M_DEVBUF, M_NOWAIT);
if (dmat == NULL)
return (ENOMEM);
/*
* Linux is very simplistic about DMA memory. For now don't
* maintain all specification information. Once Linux supplies
* better facilities for doing these operations, or the
* needs of this particular driver change, we might need to do
* more here.
*/
dmat->alignment = alignment;
dmat->boundary = boundary;
dmat->maxsize = maxsize;
*ret_tag = dmat;
return (0);
}
void
ahc_dma_tag_destroy(struct ahc_softc *ahc, bus_dma_tag_t dmat)
{
free(dmat, M_DEVBUF);
}
int
ahc_dmamem_alloc(struct ahc_softc *ahc, bus_dma_tag_t dmat, void** vaddr,
int flags, bus_dmamap_t *mapp)
{
bus_dmamap_t map;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,0)
map = malloc(sizeof(*map), M_DEVBUF, M_NOWAIT);
if (map == NULL)
return (ENOMEM);
/*
* Although we can dma data above 4GB, our
* "consistent" memory is below 4GB for
* space efficiency reasons (only need a 4byte
* address). For this reason, we have to reset
* our dma mask when doing allocations.
*/
if(ahc->dev_softc)
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,3)
pci_set_dma_mask(ahc->dev_softc, 0xFFFFFFFF);
#else
ahc->dev_softc->dma_mask = 0xFFFFFFFF;
#endif
*vaddr = pci_alloc_consistent(ahc->dev_softc,
dmat->maxsize, &map->bus_addr);
if (ahc->dev_softc)
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,3)
pci_set_dma_mask(ahc->dev_softc, ahc->platform_data->hw_dma_mask);
#else
ahc->dev_softc->dma_mask = ahc->platform_data->hw_dma_mask;
#endif
#else /* LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0) */
/*
* At least in 2.2.14, malloc is a slab allocator so all
* allocations are aligned. We assume for these kernel versions
* that all allocations will be bellow 4Gig, physically contiguous,
* and accessable via DMA by the controller.
*/
map = NULL; /* No additional information to store */
*vaddr = malloc(dmat->maxsize, M_DEVBUF, M_NOWAIT);
#endif
if (*vaddr == NULL)
return (ENOMEM);
*mapp = map;
return(0);
}
void
ahc_dmamem_free(struct ahc_softc *ahc, bus_dma_tag_t dmat,
void* vaddr, bus_dmamap_t map)
{
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,0)
pci_free_consistent(ahc->dev_softc, dmat->maxsize,
vaddr, map->bus_addr);
#else
free(vaddr, M_DEVBUF);
#endif
}
int
ahc_dmamap_load(struct ahc_softc *ahc, bus_dma_tag_t dmat, bus_dmamap_t map,
void *buf, bus_size_t buflen, bus_dmamap_callback_t *cb,
void *cb_arg, int flags)
{
/*
* Assume for now that this will only be used during
* initialization and not for per-transaction buffer mapping.
*/
bus_dma_segment_t stack_sg;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,0)
stack_sg.ds_addr = map->bus_addr;
#else
stack_sg.ds_addr = VIRT_TO_BUS(buf);
#endif
stack_sg.ds_len = dmat->maxsize;
cb(cb_arg, &stack_sg, /*nseg*/1, /*error*/0);
return (0);
}
void
ahc_dmamap_destroy(struct ahc_softc *ahc, bus_dma_tag_t dmat, bus_dmamap_t map)
{
/*
* The map may is NULL in our < 2.3.X implementation.
*/
if (map != NULL)
free(map, M_DEVBUF);
}
int
ahc_dmamap_unload(struct ahc_softc *ahc, bus_dma_tag_t dmat, bus_dmamap_t map)
{
/* Nothing to do */
return (0);
}
/********************* Platform Dependent Functions ***************************/
int
ahc_softc_comp(struct ahc_softc *lahc, struct ahc_softc *rahc)
{
int value;
int rvalue;
int lvalue;
/*
* Under Linux, cards are ordered as follows:
* 1) VLB/EISA BIOS enabled devices sorted by BIOS address.
* 2) PCI devices with BIOS enabled sorted by bus/slot/func.
* 3) All remaining VLB/EISA devices sorted by ioport.
* 4) All remaining PCI devices sorted by bus/slot/func.
*/
value = (lahc->flags & AHC_BIOS_ENABLED)
- (rahc->flags & AHC_BIOS_ENABLED);
if (value != 0)
/* Controllers with BIOS enabled have a *higher* priority */
return (-value);
/*
* Same BIOS setting, now sort based on bus type.
* EISA and VL controllers sort together. EISA/VL
* have higher priority than PCI.
*/
rvalue = (rahc->chip & AHC_BUS_MASK);
if (rvalue == AHC_VL)
rvalue = AHC_EISA;
lvalue = (lahc->chip & AHC_BUS_MASK);
if (lvalue == AHC_VL)
lvalue = AHC_EISA;
value = lvalue - rvalue;
if (value != 0)
return (value);
/* Still equal. Sort by BIOS address, ioport, or bus/slot/func. */
switch (rvalue) {
case AHC_PCI:
{
char primary_channel;
if (aic7xxx_reverse_scan != 0)
value = ahc_get_pci_bus(rahc->dev_softc)
- ahc_get_pci_bus(lahc->dev_softc);
else
value = ahc_get_pci_bus(lahc->dev_softc)
- ahc_get_pci_bus(rahc->dev_softc);
if (value != 0)
break;
if (aic7xxx_reverse_scan != 0)
value = ahc_get_pci_slot(rahc->dev_softc)
- ahc_get_pci_slot(lahc->dev_softc);
else
value = ahc_get_pci_slot(lahc->dev_softc)
- ahc_get_pci_slot(rahc->dev_softc);
if (value != 0)
break;
/*
* On multi-function devices, the user can choose
* to have function 1 probed before function 0.
* Give whichever channel is the primary channel
* the lowest priority.
*/
primary_channel = (lahc->flags & AHC_PRIMARY_CHANNEL) + 'A';
value = 1;
if (lahc->channel == primary_channel)
value = -1;
break;
}
case AHC_EISA:
if ((rahc->flags & AHC_BIOS_ENABLED) != 0) {
value = lahc->platform_data->bios_address
- rahc->platform_data->bios_address;
} else {
value = lahc->bsh.ioport
- rahc->bsh.ioport;
}
break;
default:
panic("ahc_softc_sort: invalid bus type");
}
return (value);
}
static void
ahc_linux_setup_tag_info(char *p, char *end)
{
char *base;
char *tok;
char *tok_end;
char *tok_end2;
int i;
int instance;
int targ;
int done;
char tok_list[] = {'.', ',', '{', '}', '\0'};
if (*p != ':')
return;
instance = -1;
targ = -1;
done = FALSE;
base = p;
/* Forward us just past the ':' */
tok = base + 1;
tok_end = strchr(tok, '\0');
if (tok_end < end)
*tok_end = ',';
while (!done) {
switch (*tok) {
case '{':
if (instance == -1)
instance = 0;
else if (targ == -1)
targ = 0;
tok++;
break;
case '}':
if (targ != -1)
targ = -1;
else if (instance != -1)
instance = -1;
tok++;
break;
case ',':
case '.':
if (instance == -1)
done = TRUE;
else if (targ >= 0)
targ++;
else if (instance >= 0)
instance++;
if ((targ >= AHC_NUM_TARGETS) ||
(instance >= NUM_ELEMENTS(aic7xxx_tag_info)))
done = TRUE;
tok++;
if (!done) {
base = tok;
}
break;
case '\0':
done = TRUE;
break;
default:
done = TRUE;
tok_end = strchr(tok, '\0');
for (i = 0; tok_list[i]; i++) {
tok_end2 = strchr(tok, tok_list[i]);
if ((tok_end2) && (tok_end2 < tok_end)) {
tok_end = tok_end2;
done = FALSE;
}
}
if ((instance >= 0) && (targ >= 0)
&& (instance < NUM_ELEMENTS(aic7xxx_tag_info))
&& (targ < AHC_NUM_TARGETS)) {
aic7xxx_tag_info[instance].tag_commands[targ] =
simple_strtoul(tok, NULL, 0) & 0xff;
}
tok = tok_end;
break;
}
}
while ((p != base) && (p != NULL))
p = strtok(NULL, ",.");
}
/*
* Handle Linux boot parameters. This routine allows for assigning a value
* to a parameter with a ':' between the parameter and the value.
* ie. aic7xxx=stpwlev:1,extended
*/
int
aic7xxx_setup(char *s)
{
int i, n;
char *p;
char *end;
static struct {
const char *name;
uint32_t *flag;
} options[] = {
{ "extended", &aic7xxx_extended },
{ "no_reset", &aic7xxx_no_reset },
{ "verbose", &aic7xxx_verbose },
{ "reverse_scan", &aic7xxx_reverse_scan },
{ "no_probe", &aic7xxx_no_probe },
{ "periodic_otag", &aic7xxx_periodic_otag },
{ "pci_parity", &aic7xxx_pci_parity },
{ "seltime", &aic7xxx_seltime },
{ "tag_info", NULL }
};
end = strchr(s, '\0');
for (p = strtok(s, ",."); p; p = strtok(NULL, ",.")) {
for (i = 0; i < NUM_ELEMENTS(options); i++) {
n = strlen(options[i].name);
if (strncmp(options[i].name, p, n) != 0)
continue;
if (strncmp(p, "tag_info", n) == 0) {
ahc_linux_setup_tag_info(p + n, end);
} else if (p[n] == ':') {
*(options[i].flag) =
simple_strtoul(p + n + 1, NULL, 0);
} else if (!strncmp(p, "verbose", n)) {
*(options[i].flag) = 1;
} else {
*(options[i].flag) = ~(*(options[i].flag));
}
break;
}
}
register_reboot_notifier(&ahc_linux_notifier);
return 1;
}
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,3,0)
__setup("aic7xxx=", aic7xxx_setup);
#endif
int aic7xxx_verbose;
/*
* Try to detect an Adaptec 7XXX controller.
*/
int
ahc_linux_detect(Scsi_Host_Template *template)
{
struct ahc_softc *ahc;
int found;
/*
* Sanity checking of Linux SCSI data structures so
* that some of our hacks^H^H^H^H^Hassumptions aren't
* violated.
*/
if (offsetof(struct ahc_cmd_internal, end)
> offsetof(struct scsi_cmnd, host_scribble)) {
printf("ahc_linux_detect: SCSI data structures changed.\n");
printf("ahc_linux_detect: Unable to attach\n");
return (0);
}
#ifdef MODULE
/*
* If we've been passed any parameters, process them now.
*/
if (aic7xxx)
aic7xxx_setup(aic7xxx);
if (dummy_buffer[0] != 'P')
printk(KERN_WARNING
"aic7xxx: Please read the file /usr/src/linux/drivers/scsi/README.aic7xxx\n"
"aic7xxx: to see the proper way to specify options to the aic7xxx module\n"
"aic7xxx: Specifically, don't use any commas when passing arguments to\n"
"aic7xxx: insmod or else it might trash certain memory areas.\n");
#endif
#if LINUX_VERSION_CODE > KERNEL_VERSION(2,3,0)
template->proc_name = "aic7xxx";
#else
template->proc_dir = &proc_scsi_aic7xxx;
#endif
template->sg_tablesize = AHC_NSEG;
#ifdef CONFIG_PCI
ahc_linux_pci_probe(template);
#endif
if (aic7xxx_no_probe == 0)
aic7770_linux_probe(template);
/*
* Register with the SCSI layer all
* controllers we've found.
*/
found = 0;
TAILQ_FOREACH(ahc, &ahc_tailq, links) {
if (ahc_linux_register_host(ahc, template) == 0)
found++;
}
aic7xxx_detect_complete++;
return (found);
}
int
ahc_linux_register_host(struct ahc_softc *ahc, Scsi_Host_Template *template)
{
char buf[80];
struct Scsi_Host *host;
char *new_name;
u_long s;
template->name = ahc->description;
host = scsi_register(template, sizeof(struct ahc_softc *));
if (host == NULL)
return (ENOMEM);
ahc_lock(ahc, &s);
*((struct ahc_softc **)host->hostdata) = ahc;
ahc->platform_data->host = host;
host->can_queue = AHC_MAX_QUEUE;
host->cmd_per_lun = 2;
host->sg_tablesize = AHC_NSEG;
host->select_queue_depths = ahc_linux_select_queue_depth;
/* XXX No way to communicate the ID for multiple channels */
host->this_id = ahc->our_id;
host->irq = ahc->platform_data->irq;
host->max_id = (ahc->features & AHC_WIDE) ? 16 : 8;
host->max_lun = AHC_NUM_LUNS;
host->max_channel = (ahc->features & AHC_TWIN) ? 1 : 0;
ahc_set_unit(ahc, ahc_linux_next_unit());
sprintf(buf, "scsi%d", host->host_no);
new_name = malloc(strlen(buf) + 1, M_DEVBUF, M_NOWAIT);
if (new_name != NULL) {
strcpy(new_name, buf);
ahc_set_name(ahc, new_name);
}
host->unique_id = ahc->unit;
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,4)
scsi_set_pci_device(host, ahc->dev_softc);
#endif
ahc_linux_initialize_scsi_bus(ahc);
ahc_unlock(ahc, &s);
return (0);
}
uint64_t
ahc_linux_get_memsize()
{
struct sysinfo si;
si_meminfo(&si);
return (si.totalram << PAGE_SHIFT);
}
/*
* Find the smallest available unit number to use
* for a new device. We don't just use a static
* count to handle the "repeated hot-(un)plug"
* scenario.
*/
static int
ahc_linux_next_unit()
{
struct ahc_softc *ahc;
int unit;
unit = 0;
retry:
TAILQ_FOREACH(ahc, &ahc_tailq, links) {
if (ahc->unit == unit) {
unit++;
goto retry;
}
}
return (unit);
}
/*
* Place the SCSI bus into a known state by either resetting it,
* or forcing transfer negotiations on the next command to any
* target.
*/
void
ahc_linux_initialize_scsi_bus(struct ahc_softc *ahc)
{
int i;
int numtarg;
i = 0;
numtarg = 0;
if (aic7xxx_no_reset != 0)
ahc->flags &= ~(AHC_RESET_BUS_A|AHC_RESET_BUS_B);
if ((ahc->flags & AHC_RESET_BUS_A) != 0)
ahc_reset_channel(ahc, 'A', /*initiate_reset*/TRUE);
else
numtarg = (ahc->features & AHC_WIDE) ? 16 : 8;
if ((ahc->features & AHC_TWIN) != 0) {
if ((ahc->flags & AHC_RESET_BUS_B) != 0) {
ahc_reset_channel(ahc, 'B', /*initiate_reset*/TRUE);
} else {
if (numtarg == 0)
i = 8;
numtarg += 8;
}
}
for (; i < numtarg; i++) {
struct ahc_devinfo devinfo;
struct ahc_initiator_tinfo *tinfo;
struct ahc_tmode_tstate *tstate;
u_int our_id;
u_int target_id;
char channel;
channel = 'A';
our_id = ahc->our_id;
target_id = i;
if (i > 7 && (ahc->features & AHC_TWIN) != 0) {
channel = 'B';
our_id = ahc->our_id_b;
target_id = i % 8;
}
tinfo = ahc_fetch_transinfo(ahc, channel, our_id,
target_id, &tstate);
tinfo->goal = tinfo->user;
/*
* Don't try negotiations that require PPR messages
* until we successfully retrieve Inquiry data.
*/
tinfo->goal.ppr_options = 0;
if (tinfo->goal.transport_version > SCSI_REV_2)
tinfo->goal.transport_version = SCSI_REV_2;
ahc_compile_devinfo(&devinfo, our_id, target_id,
CAM_LUN_WILDCARD, channel, ROLE_INITIATOR);
ahc_update_neg_request(ahc, &devinfo, tstate,
tinfo, /*force*/FALSE);
}
/* Give the bus some time to recover */
if ((ahc->flags & (AHC_RESET_BUS_A|AHC_RESET_BUS_B)) != 0) {
ahc_linux_freeze_sim_queue(ahc);
init_timer(&ahc->platform_data->reset_timer);
ahc->platform_data->reset_timer.data = (u_long)ahc;
ahc->platform_data->reset_timer.expires =
jiffies + (AIC7XXX_RESET_DELAY * HZ)/1000;
ahc->platform_data->reset_timer.function =
ahc_linux_release_sim_queue;
add_timer(&ahc->platform_data->reset_timer);
}
}
int
ahc_platform_alloc(struct ahc_softc *ahc, void *platform_arg)
{
ahc->platform_data =
malloc(sizeof(struct ahc_platform_data), M_DEVBUF, M_NOWAIT);
if (ahc->platform_data == NULL)
return (ENOMEM);
memset(ahc->platform_data, 0, sizeof(struct ahc_platform_data));
TAILQ_INIT(&ahc->platform_data->completeq);
TAILQ_INIT(&ahc->platform_data->device_runq);
ahc->platform_data->hw_dma_mask = 0xFFFFFFFF;
ahc_lockinit(ahc);
ahc_done_lockinit(ahc);
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,0)
init_MUTEX_LOCKED(&ahc->platform_data->eh_sem);
#else
ahc->platform_data->eh_sem = MUTEX_LOCKED;
#endif
ahc->seltime = (aic7xxx_seltime & 0x3) << 4;
ahc->seltime_b = (aic7xxx_seltime & 0x3) << 4;
return (0);
}
void
ahc_platform_free(struct ahc_softc *ahc)
{
if (ahc->platform_data != NULL) {
if (ahc->platform_data->host != NULL)
scsi_unregister(ahc->platform_data->host);
if (ahc->platform_data->irq)
free_irq(ahc->platform_data->irq, ahc);
if (ahc->tag == BUS_SPACE_PIO
&& ahc->bsh.ioport != 0)
release_region(ahc->bsh.ioport, 256);
if (ahc->tag == BUS_SPACE_MEMIO
&& ahc->bsh.maddr != NULL) {
u_long base_addr;
base_addr = (u_long)ahc->bsh.maddr;
base_addr &= PAGE_MASK;
iounmap((void *)base_addr);
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)
release_mem_region(ahc->platform_data->mem_busaddr,
0x1000);
#endif
}
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)
/* XXX Need an instance detach in the PCI code */
if (ahc->dev_softc != NULL)
ahc->dev_softc->driver = NULL;
#endif
free(ahc->platform_data, M_DEVBUF);
}
}
void
ahc_platform_freeze_devq(struct ahc_softc *ahc, struct scb *scb)
{
ahc_platform_abort_scbs(ahc, SCB_GET_TARGET(ahc, scb),
SCB_GET_CHANNEL(ahc, scb),
SCB_GET_LUN(scb), SCB_LIST_NULL,
ROLE_UNKNOWN, CAM_REQUEUE_REQ);
}
void
ahc_platform_set_tags(struct ahc_softc *ahc, struct ahc_devinfo *devinfo,
ahc_queue_alg alg)
{
struct ahc_linux_device *dev;
int was_queuing;
int now_queuing;
dev = ahc_linux_get_device(ahc, devinfo->channel - 'A',
devinfo->target,
devinfo->lun, /*alloc*/FALSE);
if (dev == NULL)
return;
was_queuing = dev->flags & (AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED);
now_queuing = alg != AHC_QUEUE_NONE;
if ((dev->flags & AHC_DEV_FREEZE_TIL_EMPTY) == 0
&& (was_queuing != now_queuing)
&& (dev->active != 0)) {
dev->flags |= AHC_DEV_FREEZE_TIL_EMPTY;
dev->qfrozen++;
}
dev->flags &= ~(AHC_DEV_Q_BASIC|AHC_DEV_Q_TAGGED|AHC_DEV_PERIODIC_OTAG);
if (now_queuing) {
if (!was_queuing) {
/*
* Start out agressively and allow our
* dynamic queue depth algorithm to take
* care of the rest.
*/
dev->maxtags = AHC_MAX_QUEUE;
dev->openings = dev->maxtags - dev->active;
}
if (alg == AHC_QUEUE_TAGGED) {
dev->flags |= AHC_DEV_Q_TAGGED;
if (aic7xxx_periodic_otag != 0)
dev->flags |= AHC_DEV_PERIODIC_OTAG;
} else
dev->flags |= AHC_DEV_Q_BASIC;
} else {
/* We can only have one opening */
dev->maxtags = 0;
dev->openings = 1 - dev->active;
}
}
int
ahc_platform_abort_scbs(struct ahc_softc *ahc, int target, char channel,
int lun, u_int tag, role_t role, uint32_t status)
{
int chan;
int maxchan;
int targ;
int maxtarg;
int clun;
int maxlun;
int count;
if (tag != SCB_LIST_NULL)
return (0);
chan = 0;
if (channel != ALL_CHANNELS) {
chan = channel - 'A';
maxchan = chan + 1;
} else {
maxchan = (ahc->features & AHC_TWIN) ? 2 : 1;
}
targ = 0;
if (target != CAM_TARGET_WILDCARD) {
targ = target;
maxtarg = targ + 1;
} else {
maxtarg = (ahc->features & AHC_WIDE) ? 16 : 8;
}
clun = 0;
if (lun != CAM_LUN_WILDCARD) {
clun = lun;
maxlun = clun + 1;
} else {
maxlun = 16;
}
count = 0;
for (; chan < maxchan; chan++) {
for (; targ < maxtarg; targ++) {
for (; clun < maxlun; clun++) {
struct ahc_linux_device *dev;
struct ahc_busyq *busyq;
struct ahc_cmd *acmd;
dev = ahc_linux_get_device(ahc, chan,
targ, clun,
/*alloc*/FALSE);
if (dev == NULL)
continue;
busyq = &dev->busyq;
while ((acmd = TAILQ_FIRST(busyq)) != NULL) {
Scsi_Cmnd *cmd;
cmd = &acmd_scsi_cmd(acmd);
TAILQ_REMOVE(busyq, acmd,
acmd_links.tqe);
count++;
cmd->result = status << 16;
ahc_linux_queue_cmd_complete(ahc, cmd);
}
}
}
}
return (count);
}
/*
* Sets the queue depth for each SCSI device hanging
* off the input host adapter.
*/
static void
ahc_linux_select_queue_depth(struct Scsi_Host * host,
Scsi_Device * scsi_devs)
{
Scsi_Device *device;
struct ahc_softc *ahc;
u_long flags;
int scbnum;
ahc = *((struct ahc_softc **)host->hostdata);
ahc_lock(ahc, &flags);
scbnum = 0;
for (device = scsi_devs; device != NULL; device = device->next) {
if (device->host == host) {
ahc_linux_device_queue_depth(ahc, device);
scbnum += device->queue_depth;
}
}
ahc_unlock(ahc, &flags);
}
/*
* Determines the queue depth for a given device.
*/
static void
ahc_linux_device_queue_depth(struct ahc_softc *ahc, Scsi_Device * device)
{
struct ahc_devinfo devinfo;
struct ahc_initiator_tinfo *targ_info;
struct ahc_tmode_tstate *tstate;
uint8_t tags;
ahc_compile_devinfo(&devinfo,
device->channel == 0 ? ahc->our_id : ahc->our_id_b,
device->id, device->lun,
device->channel == 0 ? 'A' : 'B',
ROLE_INITIATOR);
targ_info = ahc_fetch_transinfo(ahc, devinfo.channel,
devinfo.our_scsiid,
devinfo.target, &tstate);
tags = 0;
if (device->tagged_supported != 0
&& (ahc->user_discenable & devinfo.target_mask) != 0) {
if (ahc->unit >= NUM_ELEMENTS(aic7xxx_tag_info)) {
printf("aic7xxx: WARNING, insufficient "
"tag_info instances for installed "
"controllers. Using defaults\n");
printf("aic7xxx: Please update the "
"aic7xxx_tag_info array in the "
"aic7xxx.c source file.\n");
tags = AHC_MAX_QUEUE;
} else {
adapter_tag_info_t *tag_info;
tag_info = &aic7xxx_tag_info[ahc->unit];
tags = tag_info->tag_commands[devinfo.target_offset];
if (tags > AHC_MAX_QUEUE)
tags = AHC_MAX_QUEUE;
}
}
if (tags != 0) {
device->queue_depth = tags;
ahc_set_tags(ahc, &devinfo, AHC_QUEUE_TAGGED);
printf("scsi%d:%c:%d:%d: Tagged Queuing enabled. Depth %d\n",
ahc->platform_data->host->host_no, device->channel + 'A',
device->id, device->lun, tags);
} else {
/*
* We allow the OS to queue 2 untagged transactions to
* us at any time even though we can only execute them
* serially on the controller/device. This should remove
* some latency.
*/
device->queue_depth = 2;
}
}
/*
* Queue an SCB to the controller.
*/
int
ahc_linux_queue(Scsi_Cmnd * cmd, void (*scsi_done) (Scsi_Cmnd *))
{
struct ahc_softc *ahc;
struct ahc_linux_device *dev;
u_long flags;
ahc = *(struct ahc_softc **)cmd->host->hostdata;
/*
* Save the callback on completion function.
*/
cmd->scsi_done = scsi_done;
ahc_lock(ahc, &flags);
dev = ahc_linux_get_device(ahc, cmd->channel, cmd->target,
cmd->lun, /*alloc*/TRUE);
if (dev == NULL) {
ahc_unlock(ahc, &flags);
printf("aic7xxx_linux_queue: Unable to allocate device!\n");
return (-ENOMEM);
}
cmd->result = CAM_REQ_INPROG << 16;
TAILQ_INSERT_TAIL(&dev->busyq, (struct ahc_cmd *)cmd, acmd_links.tqe);
if ((dev->flags & AHC_DEV_ON_RUN_LIST) == 0) {
TAILQ_INSERT_TAIL(&ahc->platform_data->device_runq, dev, links);
dev->flags |= AHC_DEV_ON_RUN_LIST;
ahc_linux_run_device_queues(ahc);
}
ahc_unlock(ahc, &flags);
return (0);
}
static void
ahc_linux_run_device_queue(struct ahc_softc *ahc, struct ahc_linux_device *dev)
{
struct ahc_cmd *acmd;
struct scsi_cmnd *cmd;
struct scb *scb;
struct hardware_scb *hscb;
struct ahc_initiator_tinfo *tinfo;
struct ahc_tmode_tstate *tstate;
uint16_t mask;
if ((dev->flags & AHC_DEV_ON_RUN_LIST) != 0)
panic("running device on run list");
while ((acmd = TAILQ_FIRST(&dev->busyq)) != NULL
&& dev->openings > 0 && dev->qfrozen == 0) {
/*
* Schedule us to run later. The only reason we are not
* running is because the whole controller Q is frozen.
*/
if (ahc->platform_data->qfrozen != 0) {
TAILQ_INSERT_TAIL(&ahc->platform_data->device_runq,
dev, links);
dev->flags |= AHC_DEV_ON_RUN_LIST;
return;
}
/*
* Get an scb to use.
*/
if ((scb = ahc_get_scb(ahc)) == NULL) {
TAILQ_INSERT_TAIL(&ahc->platform_data->device_runq,
dev, links);
dev->flags |= AHC_DEV_ON_RUN_LIST;
ahc->flags |= AHC_RESOURCE_SHORTAGE;
return;
}
TAILQ_REMOVE(&dev->busyq, acmd, acmd_links.tqe);
cmd = &acmd_scsi_cmd(acmd);
scb->io_ctx = cmd;
scb->platform_data->dev = dev;
hscb = scb->hscb;
cmd->host_scribble = (char *)scb;
/*
* Fill out basics of the HSCB.
*/
hscb->control = 0;
hscb->scsiid = BUILD_SCSIID(ahc, cmd);
hscb->lun = cmd->lun;
mask = SCB_GET_TARGET_MASK(ahc, scb);
tinfo = ahc_fetch_transinfo(ahc, SCB_GET_CHANNEL(ahc, scb),
SCB_GET_OUR_ID(scb),
SCB_GET_TARGET(ahc, scb), &tstate);
hscb->scsirate = tinfo->scsirate;
hscb->scsioffset = tinfo->curr.offset;
if ((tstate->ultraenb & mask) != 0)
hscb->control |= ULTRAENB;
if ((ahc->user_discenable & mask) != 0)
hscb->control |= DISCENB;
if ((tstate->auto_negotiate & mask) != 0) {
scb->flags |= SCB_AUTO_NEGOTIATE;
scb->hscb->control |= MK_MESSAGE;
}
if ((dev->flags & (AHC_DEV_Q_TAGGED|AHC_DEV_Q_BASIC)) != 0) {
if (dev->commands_since_idle_or_otag == AHC_OTAG_THRESH
&& (dev->flags & AHC_DEV_Q_TAGGED) != 0) {
hscb->control |= MSG_ORDERED_TASK;
dev->commands_since_idle_or_otag = 0;
} else {
hscb->control |= MSG_SIMPLE_TASK;
}
}
hscb->cdb_len = cmd->cmd_len;
if (hscb->cdb_len <= 12) {
memcpy(hscb->shared_data.cdb, cmd->cmnd, hscb->cdb_len);
} else {
memcpy(hscb->cdb32, cmd->cmnd, hscb->cdb_len);
scb->flags |= SCB_CDB32_PTR;
}
scb->platform_data->xfer_len = 0;
ahc_set_residual(scb, 0);
ahc_set_sense_residual(scb, 0);
if (cmd->use_sg != 0) {
struct ahc_dma_seg *sg;
struct scatterlist *cur_seg;
struct scatterlist *end_seg;
int nseg;
cur_seg = (struct scatterlist *)cmd->request_buffer;
nseg = pci_map_sg(ahc->dev_softc, cur_seg, cmd->use_sg,
scsi_to_pci_dma_dir(cmd ->sc_data_direction));
end_seg = cur_seg + nseg;
/* Copy the segments into the SG list. */
sg = scb->sg_list;
/*
* The sg_count may be larger than nseg if
* a transfer crosses a 32bit page.
*/
scb->sg_count = 0;
while(cur_seg < end_seg) {
bus_addr_t addr;
bus_size_t len;
int consumed;
addr = sg_dma_address(cur_seg);
len = sg_dma_len(cur_seg);
consumed = ahc_linux_map_seg(ahc, scb,
sg, addr, len);
sg += consumed;
scb->sg_count += consumed;
cur_seg++;
}
sg--;
sg->len |= ahc_htole32(AHC_DMA_LAST_SEG);
/*
* Reset the sg list pointer.
*/
scb->hscb->sgptr =
ahc_htole32(scb->sg_list_phys | SG_FULL_RESID);
/*
* Copy the first SG into the "current"
* data pointer area.
*/
scb->hscb->dataptr = scb->sg_list->addr;
scb->hscb->datacnt = scb->sg_list->len;
} else if (cmd->request_bufflen != 0) {
struct ahc_dma_seg *sg;
bus_addr_t addr;
sg = scb->sg_list;
addr = pci_map_single(ahc->dev_softc,
cmd->request_buffer,
cmd->request_bufflen,
scsi_to_pci_dma_dir(cmd->sc_data_direction));
scb->sg_count = 0;
scb->sg_count = ahc_linux_map_seg(ahc, scb,
sg, addr,
cmd->request_bufflen);
sg->len |= ahc_htole32(AHC_DMA_LAST_SEG);
/*
* Reset the sg list pointer.
*/
scb->hscb->sgptr =
ahc_htole32(scb->sg_list_phys | SG_FULL_RESID);
/*
* Copy the first SG into the "current"
* data pointer area.
*/
scb->hscb->dataptr = sg->addr;
scb->hscb->datacnt = sg->len;
} else {
scb->hscb->sgptr = ahc_htole32(SG_LIST_NULL);
scb->hscb->dataptr = 0;
scb->hscb->datacnt = 0;
scb->sg_count = 0;
}
ahc_sync_sglist(ahc, scb, BUS_DMASYNC_PREWRITE);
LIST_INSERT_HEAD(&ahc->pending_scbs, scb, pending_links);
dev->openings--;
dev->active++;
dev->commands_issued++;
if ((dev->flags & AHC_DEV_PERIODIC_OTAG) != 0)
dev->commands_since_idle_or_otag++;
/*
* We only allow one untagged transaction
* per target in the initiator role unless
* we are storing a full busy target *lun*
* table in SCB space.
*/
if ((scb->hscb->control & (TARGET_SCB|TAG_ENB)) == 0
&& (ahc->features & AHC_SCB_BTT) == 0) {
struct scb_tailq *untagged_q;
int target_offset;
target_offset = SCB_GET_TARGET_OFFSET(ahc, scb);
untagged_q = &(ahc->untagged_queues[target_offset]);
TAILQ_INSERT_TAIL(untagged_q, scb, links.tqe);
scb->flags |= SCB_UNTAGGEDQ;
if (TAILQ_FIRST(untagged_q) != scb)
continue;
}
scb->flags |= SCB_ACTIVE;
ahc_queue_scb(ahc, scb);
}
}
/*
* SCSI controller interrupt handler.
*/
void
ahc_linux_isr(int irq, void *dev_id, struct pt_regs * regs)
{
struct ahc_softc *ahc;
struct ahc_cmd *acmd;
u_long flags;
ahc = (struct ahc_softc *) dev_id;
ahc_lock(ahc, &flags);
ahc_intr(ahc);
/*
* It would be nice to run the device queues from a
* bottom half handler, but as there is no way to
* dynamically register one, we'll have to postpone
* that until we get integrated into the kernel.
*/
ahc_linux_run_device_queues(ahc);
acmd = TAILQ_FIRST(&ahc->platform_data->completeq);
TAILQ_INIT(&ahc->platform_data->completeq);
ahc_unlock(ahc, &flags);
if (acmd != NULL)
ahc_linux_run_complete_queue(ahc, acmd);
}
void
ahc_platform_flushwork(struct ahc_softc *ahc)
{
struct ahc_cmd *acmd;
acmd = TAILQ_FIRST(&ahc->platform_data->completeq);
TAILQ_INIT(&ahc->platform_data->completeq);
if (acmd != NULL)
ahc_linux_run_complete_queue(ahc, acmd);
}
static struct ahc_linux_target*
ahc_linux_alloc_target(struct ahc_softc *ahc, u_int channel, u_int target)
{
struct ahc_linux_target *targ;
u_int target_offset;
targ = malloc(sizeof(*targ), M_DEVBUG, M_NOWAIT);
if (targ == NULL)
return (NULL);
memset(targ, 0, sizeof(*targ));
targ->channel = channel;
targ->target = target;
target_offset = target;
if (channel != 0)
target_offset += 8;
ahc->platform_data->targets[target_offset] = targ;
return (targ);
}
static void
ahc_linux_free_target(struct ahc_softc *ahc, struct ahc_linux_target *targ)
{
u_int target_offset;
target_offset = targ->target;
if (targ->channel != 0)
target_offset += 8;
ahc->platform_data->targets[target_offset] = NULL;
free(targ, M_DEVBUF);
}
static struct ahc_linux_device*
ahc_linux_alloc_device(struct ahc_softc *ahc,
struct ahc_linux_target *targ, u_int lun)
{
struct ahc_linux_device *dev;
dev = malloc(sizeof(*dev), M_DEVBUG, M_NOWAIT);
if (dev == NULL)
return (NULL);
memset(dev, 0, sizeof(*dev));
TAILQ_INIT(&dev->busyq);
dev->flags = AHC_DEV_UNCONFIGURED;
dev->lun = lun;
dev->target = targ;
/*
* We start out life using untagged
* transactions of which we allow one.
*/
dev->openings = 1;
/*
* Set maxtags to 0. This will be changed if we
* later determine that we are dealing with
* a tagged queuing capable device.
*/
dev->maxtags = 0;
targ->refcount++;
targ->devices[lun] = dev;
return (dev);
}
static void
ahc_linux_free_device(struct ahc_softc *ahc, struct ahc_linux_device *dev)
{
struct ahc_linux_target *targ;
targ = dev->target;
targ->devices[dev->lun] = NULL;
free(dev, M_DEVBUF);
targ->refcount--;
if (targ->refcount == 0)
ahc_linux_free_target(ahc, targ);
}
/*
* Return a string describing the driver.
*/
const char *
ahc_linux_info(struct Scsi_Host *host)
{
static char buffer[512];
char ahc_info[256];
char *bp;
struct ahc_softc *ahc;
bp = &buffer[0];
ahc = *(struct ahc_softc **)host->hostdata;
memset(bp, 0, sizeof(buffer));
strcpy(bp, "Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev ");
strcat(bp, AIC7XXX_DRIVER_VERSION);
strcat(bp, "\n");
strcat(bp, " <");
strcat(bp, ahc->description);
strcat(bp, ">\n");
strcat(bp, " ");
ahc_controller_info(ahc, ahc_info);
strcat(bp, ahc_info);
strcat(bp, "\n");
return (bp);
}
void
ahc_send_async(struct ahc_softc *ahc, char channel,
u_int target, u_int lun, ac_code code, void *arg)
{
switch (code) {
case AC_TRANSFER_NEG:
{
char buf[80];
struct ahc_linux_target *targ;
struct info_str info;
struct ahc_initiator_tinfo *tinfo;
struct ahc_tmode_tstate *tstate;
int target_offset;
info.buffer = buf;
info.length = sizeof(buf);
info.offset = 0;
info.pos = 0;
tinfo = ahc_fetch_transinfo(ahc, channel,
channel == 'A' ? ahc->our_id
: ahc->our_id_b,
target, &tstate);
/*
* Don't bother reporting results while
* negotiations are still pending.
*/
if (tinfo->curr.period != tinfo->goal.period
|| tinfo->curr.width != tinfo->goal.width
|| tinfo->curr.offset != tinfo->goal.offset
|| tinfo->curr.ppr_options != tinfo->goal.ppr_options)
if (bootverbose == 0)
break;
/*
* Don't bother reporting results that
* are identical to those last reported.
*/
target_offset = target;
if (channel == 'B')
target_offset += 8;
targ = ahc->platform_data->targets[target_offset];
if (targ != NULL
&& tinfo->curr.period == targ->last_tinfo.period
&& tinfo->curr.width == targ->last_tinfo.width
&& tinfo->curr.offset == targ->last_tinfo.offset
&& tinfo->curr.ppr_options == targ->last_tinfo.ppr_options)
if (bootverbose == 0)
break;
targ->last_tinfo.period = tinfo->curr.period;
targ->last_tinfo.width = tinfo->curr.width;
targ->last_tinfo.offset = tinfo->curr.offset;
targ->last_tinfo.ppr_options = tinfo->curr.ppr_options;
printf("(%s:%c:", ahc_name(ahc), channel);
if (target == CAM_TARGET_WILDCARD)
printf("*): ");
else
printf("%d): ", target);
ahc_format_transinfo(&info, &tinfo->curr);
if (info.pos < info.length)
*info.buffer = '\0';
else
buf[info.length - 1] = '\0';
printf("%s", buf);
break;
}
case AC_SENT_BDR:
break;
case AC_BUS_RESET:
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,0)
if (ahc->platform_data->host != NULL) {
scsi_report_bus_reset(ahc->platform_data->host,
channel - 'A');
}
#endif
break;
default:
panic("ahc_send_async: Unexpected async event");
}
}
/*
* Calls the higher level scsi done function and frees the scb.
*/
void
ahc_done(struct ahc_softc *ahc, struct scb * scb)
{
Scsi_Cmnd *cmd;
struct ahc_linux_device *dev;
LIST_REMOVE(scb, pending_links);
if ((scb->flags & SCB_UNTAGGEDQ) != 0) {
struct scb_tailq *untagged_q;
int target_offset;
target_offset = SCB_GET_TARGET_OFFSET(ahc, scb);
untagged_q = &(ahc->untagged_queues[target_offset]);
TAILQ_REMOVE(untagged_q, scb, links.tqe);
ahc_run_untagged_queue(ahc, untagged_q);
}
if ((scb->flags & SCB_ACTIVE) == 0) {
printf("SCB %d done'd twice\n", scb->hscb->tag);
ahc_dump_card_state(ahc);
panic("Stopping for safety");
}
cmd = scb->io_ctx;
dev = scb->platform_data->dev;
dev->active--;
dev->openings++;
ahc_linux_unmap_scb(ahc, scb);
if (scb->flags & SCB_SENSE) {
memcpy(cmd->sense_buffer, ahc_get_sense_buf(ahc, scb),
MIN(sizeof(struct scsi_sense_data),
sizeof(cmd->sense_buffer)));
cmd->result |= (DRIVER_SENSE << 24);
} else {
/*
* Guard against stale sense data.
* The Linux mid-layer assumes that sense
* was retrieved anytime the first byte of
* the sense buffer looks "sane".
*/
cmd->sense_buffer[0] = 0;
}
if (ahc_get_transaction_status(scb) == CAM_REQ_INPROG) {
uint32_t amount_xferred;
amount_xferred =
ahc_get_transfer_length(scb) - ahc_get_residual(scb);
if (amount_xferred < scb->io_ctx->underflow) {
printf("Saw underflow (%ld of %ld bytes). "
"Treated as error\n",
ahc_get_residual(scb),
ahc_get_transfer_length(scb));
ahc_set_transaction_status(scb, CAM_DATA_RUN_ERR);
} else {
ahc_set_transaction_status(scb, CAM_REQ_CMP);
ahc_linux_sniff_command(ahc, cmd, scb);
}
} else if (ahc_get_transaction_status(scb) == DID_OK) {
ahc_linux_handle_scsi_status(ahc, dev, scb);
} else if (ahc_get_transaction_status(scb) == DID_NO_CONNECT) {
/*
* Should a selection timeout kill the device?
* That depends on whether the selection timeout
* is persistent. Since we have no guarantee that
* the mid-layer will issue an inquiry for this device
* again, we can't just kill it off.
dev->flags |= AHC_DEV_UNCONFIGURED;
*/
}
if (dev->openings == 1
&& ahc_get_transaction_status(scb) == CAM_REQ_CMP
&& ahc_get_scsi_status(scb) != SCSI_STATUS_QUEUE_FULL)
dev->tag_success_count++;
/*
* Some devices deal with temporary internal resource
* shortages by returning queue full. When the queue
* full occurrs, we throttle back. Slowly try to get
* back to our previous queue depth.
*/
if ((dev->openings + dev->active) < dev->maxtags
&& dev->tag_success_count > AHC_TAG_SUCCESS_INTERVAL) {
dev->tag_success_count = 0;
dev->openings++;
}
if (dev->active == 0)
dev->commands_since_idle_or_otag = 0;
if (TAILQ_EMPTY(&dev->busyq)) {
if ((dev->flags & AHC_DEV_UNCONFIGURED) != 0
&& dev->active == 0)
ahc_linux_free_device(ahc, dev);
} else if ((dev->flags & AHC_DEV_ON_RUN_LIST) == 0) {
TAILQ_INSERT_TAIL(&ahc->platform_data->device_runq, dev, links);
dev->flags |= AHC_DEV_ON_RUN_LIST;
}
if ((scb->flags & SCB_RECOVERY_SCB) != 0) {
printf("Recovery SCB completes\n");
up(&ahc->platform_data->eh_sem);
}
ahc_free_scb(ahc, scb);
ahc_linux_queue_cmd_complete(ahc, cmd);
}
static void
ahc_linux_handle_scsi_status(struct ahc_softc *ahc,
struct ahc_linux_device *dev, struct scb *scb)
{
/*
* We don't currently trust the mid-layer to
* properly deal with queue full or busy. So,
* when one occurs, we tell the mid-layer to
* unconditionally requeue the command to us
* so that we can retry it ourselves. We also
* implement our own throttling mechanism so
* we don't clobber the device with too many
* commands.
*/
switch (ahc_get_scsi_status(scb)) {
default:
break;
case SCSI_STATUS_QUEUE_FULL:
{
/*
* By the time the core driver has returned this
* command, all other commands that were queued
* to us but not the device have been returned.
* This ensures that dev->active is equal to
* the number of commands actually queued to
* the device.
*/
dev->tag_success_count = 0;
if (dev->active != 0) {
/*
* Drop our opening count to the number
* of commands currently outstanding.
*/
dev->openings = 0;
/*
ahc_print_path(ahc, scb);
printf("Dropping tag count to %d\n", dev->active);
*/
if (dev->active == dev->tags_on_last_queuefull) {
dev->last_queuefull_same_count++;
/*
* If we repeatedly see a queue full
* at the same queue depth, this
* device has a fixed number of tag
* slots. Lock in this tag depth
* so we stop seeing queue fulls from
* this device.
*/
if (dev->last_queuefull_same_count
== AHC_LOCK_TAGS_COUNT) {
dev->maxtags = dev->active;
ahc_print_path(ahc, scb);
printf("Locking max tag count at %d\n",
dev->active);
}
} else {
dev->tags_on_last_queuefull = dev->active;
dev->last_queuefull_same_count = 0;
}
ahc_set_transaction_status(scb, CAM_REQUEUE_REQ);
ahc_set_scsi_status(scb, SCSI_STATUS_OK);
break;
}
/*
* Drop down to a single opening, and treat this
* as if the target return BUSY SCSI status.
*/
dev->openings = 1;
/* FALLTHROUGH */
}
case SCSI_STATUS_BUSY:
/*
* XXX Set a timer and handle ourselves????
* For now we pray that the mid-layer does something
* sane for devices that are busy.
*/
ahc_set_scsi_status(scb, SCSI_STATUS_BUSY);
break;
}
}
static void
ahc_linux_filter_command(struct ahc_softc *ahc, Scsi_Cmnd *cmd, struct scb *scb)
{
switch (cmd->cmnd[0]) {
case INQUIRY:
{
struct ahc_devinfo devinfo;
struct scsi_inquiry *inq;
struct scsi_inquiry_data *sid;
struct ahc_initiator_tinfo *targ_info;
struct ahc_tmode_tstate *tstate;
struct ahc_syncrate *syncrate;
struct ahc_linux_device *dev;
u_int scsiid;
u_int maxsync;
int transferred_len;
int minlen;
u_int width;
u_int period;
u_int offset;
u_int ppr_options;
/*
* Validate the command. We only want to filter
* standard inquiry commands, not those querying
* Vital Product Data.
*/
inq = (struct scsi_inquiry *)cmd->cmnd;
if ((inq->byte2 & SI_EVPD) != 0
|| inq->page_code != 0)
break;
if (cmd->use_sg != 0) {
printf("%s: SG Inquiry response ignored\n",
ahc_name(ahc));
break;
}
transferred_len = ahc_get_transfer_length(scb)
- ahc_get_residual(scb);
sid = (struct scsi_inquiry_data *)cmd->request_buffer;
/*
* Determine if this lun actually exists. If so,
* hold on to its corresponding device structure.
* If not, make sure we release the device and
* don't bother processing the rest of this inquiry
* command.
*/
dev = ahc_linux_get_device(ahc, cmd->channel,
cmd->target, cmd->lun,
/*alloc*/FALSE);
if (transferred_len >= 1
&& SID_QUAL(sid) == SID_QUAL_LU_CONNECTED) {
dev->flags &= ~AHC_DEV_UNCONFIGURED;
} else {
dev->flags |= AHC_DEV_UNCONFIGURED;
break;
}
/*
* Update our notion of this device's transfer
* negotiation capabilities.
*/
scsiid = BUILD_SCSIID(ahc, cmd);
ahc_compile_devinfo(&devinfo, SCSIID_OUR_ID(scsiid),
cmd->target, cmd->lun,
SCSIID_CHANNEL(ahc, scsiid),
ROLE_INITIATOR);
targ_info = ahc_fetch_transinfo(ahc, devinfo.channel,
devinfo.our_scsiid,
devinfo.target, &tstate);
width = targ_info->user.width;
period = targ_info->user.period;
offset = targ_info->user.offset;
ppr_options = targ_info->user.ppr_options;
minlen = offsetof(struct scsi_inquiry_data, version) + 1;
if (transferred_len >= minlen) {
targ_info->curr.protocol_version = SID_ANSI_REV(sid);
/*
* Only attempt SPI3 once we've verified that
* the device claims to support SPI3 features.
*/
if (targ_info->curr.protocol_version < SCSI_REV_2)
targ_info->curr.transport_version =
SID_ANSI_REV(sid);
else
targ_info->curr.transport_version =
SCSI_REV_2;
}
minlen = offsetof(struct scsi_inquiry_data, flags) + 1;
if (transferred_len >= minlen
&& (sid->additional_length + 4) >= minlen) {
if ((sid->flags & SID_WBus16) == 0)
width = MSG_EXT_WDTR_BUS_8_BIT;
if ((sid->flags & SID_Sync) == 0) {
period = 0;
offset = 0;
ppr_options = 0;
}
} else {
/* Keep current settings */
break;
}
minlen = offsetof(struct scsi_inquiry_data, spi3data) + 1;
/*
* This is a kludge to deal with inquiry requests that
* are not large enough for us to pull the spi3 bits.
* In this case, we assume that a device that tells us
* they can provide inquiry data that spans the SPI3
* bits and says its SCSI3 can handle a PPR request.
* If the inquiry request has sufficient buffer space to
* cover these bits, we check them to see if any ppr options
* are available.
*/
if ((sid->additional_length + 4) >= minlen) {
if (transferred_len >= minlen
&& (sid->spi3data & SID_SPI_CLOCK_DT) == 0)
ppr_options = 0;
if (targ_info->curr.protocol_version > SCSI_REV_2)
targ_info->curr.transport_version = 3;
else
ppr_options = 0;
} else {
ppr_options = 0;
}
ahc_validate_width(ahc, /*tinfo limit*/NULL, &width,
ROLE_UNKNOWN);
if ((ahc->features & AHC_ULTRA2) != 0)
maxsync = AHC_SYNCRATE_DT;
else if ((ahc->features & AHC_ULTRA) != 0)
maxsync = AHC_SYNCRATE_ULTRA;
else
maxsync = AHC_SYNCRATE_FAST;
syncrate = ahc_find_syncrate(ahc, &period,
&ppr_options, maxsync);
ahc_validate_offset(ahc, /*tinfo limit*/NULL, syncrate,
&offset, width, ROLE_UNKNOWN);
if (offset == 0 || period == 0) {
period = 0;
offset = 0;
ppr_options = 0;
}
/* Apply our filtered user settings. */
ahc_set_width(ahc, &devinfo, width,
AHC_TRANS_GOAL, /*paused*/FALSE);
ahc_set_syncrate(ahc, &devinfo, syncrate, period,
offset, ppr_options, AHC_TRANS_GOAL,
/*paused*/FALSE);
break;
}
default:
panic("ahc_linux_filter_command: Unexpected Command type %x\n",
cmd->cmnd[0]);
break;
}
}
static void
ahc_linux_sem_timeout(u_long arg)
{
struct semaphore *sem;
sem = (struct semaphore *)arg;
up(sem);
}
static void
ahc_linux_freeze_sim_queue(struct ahc_softc *ahc)
{
ahc->platform_data->qfrozen++;
if (ahc->platform_data->qfrozen == 1)
scsi_block_requests(ahc->platform_data->host);
}
static void
ahc_linux_release_sim_queue(u_long arg)
{
struct ahc_softc *ahc;
u_long s;
int unblock_reqs;
ahc = (struct ahc_softc *)arg;
unblock_reqs = 0;
ahc_lock(ahc, &s);
if (ahc->platform_data->qfrozen > 0)
ahc->platform_data->qfrozen--;
if (ahc->platform_data->qfrozen == 0) {
unblock_reqs = 1;
ahc_linux_run_device_queues(ahc);
}
ahc_unlock(ahc, &s);
/*
* There is still a race here. The mid-layer
* should keep its own freeze count and use
* a bottom half handler to run the queues
* so we can unblock with our own lock held.
*/
if (unblock_reqs)
scsi_unblock_requests(ahc->platform_data->host);
}
static int
ahc_linux_queue_recovery_cmd(Scsi_Cmnd *cmd, scb_flag flag)
{
struct ahc_softc *ahc;
struct ahc_cmd *acmd;
struct ahc_cmd *list_acmd;
struct ahc_linux_device *dev;
struct scb *pending_scb;
u_long s;
u_int saved_scbptr;
u_int active_scb_index;
u_int last_phase;
int retval;
int paused;
int wait;
int disconnected;
paused = FALSE;
wait = FALSE;
ahc = *(struct ahc_softc **)cmd->host->hostdata;
acmd = (struct ahc_cmd *)cmd;
printf("%s:%d:%d:%d: Attempting to queue a%s message\n",
ahc_name(ahc), cmd->channel, cmd->target, cmd->lun,
flag == SCB_ABORT ? "n ABORT" : " TARGET RESET");
/*
* It is a bug that the upper layer takes
* this lock just prior to calling us.
*/
spin_unlock_irq(&io_request_lock);
ahc_lock(ahc, &s);
/*
* First determine if we currently own this command.
* Start by searching the device queue. If not found
* there, check the pending_scb list. If not found
* at all, and the system wanted us to just abort the
* command return success.
*/
dev = ahc_linux_get_device(ahc, cmd->channel, cmd->target,
cmd->lun, /*alloc*/FALSE);
if (dev == NULL) {
/*
* No target device for this command exists,
* so we must not still own the command.
*/
printf("%s:%d:%d:%d: Is not an active device\n",
ahc_name(ahc), cmd->channel, cmd->target, cmd->lun);
retval = SUCCESS;
goto no_cmd;
}
TAILQ_FOREACH(list_acmd, &dev->busyq, acmd_links.tqe) {
if (list_acmd == acmd)
break;
}
if (list_acmd != NULL) {
printf("%s:%d:%d:%d: Command found on device queue\n",
ahc_name(ahc), cmd->channel, cmd->target, cmd->lun);
if (flag == SCB_ABORT) {
TAILQ_REMOVE(&dev->busyq, list_acmd, acmd_links.tqe);
cmd->result = DID_ABORT << 16;
ahc_linux_queue_cmd_complete(ahc, cmd);
retval = SUCCESS;
goto done;
}
}
/*
* See if we can find a matching cmd in the pending list.
*/
LIST_FOREACH(pending_scb, &ahc->pending_scbs, pending_links) {
if (pending_scb->io_ctx == cmd)
break;
}
if (pending_scb == NULL && flag == SCB_DEVICE_RESET) {
/* Any SCB for this device will do for a target reset */
LIST_FOREACH(pending_scb, &ahc->pending_scbs, pending_links) {
if (ahc_match_scb(ahc, pending_scb, cmd->target,
cmd->channel, CAM_LUN_WILDCARD,
SCB_LIST_NULL, ROLE_INITIATOR) == 0)
break;
}
}
if (pending_scb == NULL) {
printf("%s:%d:%d:%d: Command not found\n",
ahc_name(ahc), cmd->channel, cmd->target, cmd->lun);
goto no_cmd;
}
if ((pending_scb->flags & SCB_RECOVERY_SCB) != 0) {
/*
* We can't queue two recovery actions using the same SCB
*/
retval = FAILED;
goto done;
}
/*
* Ensure that the card doesn't do anything
* behind our back. Also make sure that we
* didn't "just" miss an interrupt that would
* affect this cmd.
*/
ahc->flags |= AHC_ALL_INTERRUPTS;
do {
ahc_intr(ahc);
ahc_pause(ahc);
ahc_clear_critical_section(ahc);
} while (ahc_inb(ahc, INTSTAT) & INT_PEND);
ahc->flags &= ~AHC_ALL_INTERRUPTS;
paused = TRUE;
ahc_dump_card_state(ahc);
if ((pending_scb->flags & SCB_ACTIVE) == 0) {
printf("%s:%d:%d:%d: Command already completed\n",
ahc_name(ahc), cmd->channel, cmd->target, cmd->lun);
goto no_cmd;
}
disconnected = TRUE;
if (flag == SCB_ABORT) {
if (ahc_search_qinfifo(ahc, cmd->target, cmd->channel + 'A',
cmd->lun, pending_scb->hscb->tag,
ROLE_INITIATOR, CAM_REQ_ABORTED,
SEARCH_COMPLETE) > 0) {
printf("%s:%d:%d:%d: Cmd aborted from QINFIFO\n",
ahc_name(ahc), cmd->channel, cmd->target,
cmd->lun);
retval = SUCCESS;
goto done;
}
} else if (ahc_search_qinfifo(ahc, cmd->target, cmd->channel + 'A',
cmd->lun, pending_scb->hscb->tag,
ROLE_INITIATOR, /*status*/0,
SEARCH_COUNT) > 0) {
disconnected = FALSE;
}
/*
* At this point, pending_scb is the scb associated with the
* passed in command. That command is currently active on the
* bus, is in the disconnected state, or we're hoping to find
* a command for the same target active on the bus to abuse to
* send a BDR. Queue the appropriate message based on which of
* these states we are in.
*/
last_phase = ahc_inb(ahc, LASTPHASE);
saved_scbptr = ahc_inb(ahc, SCBPTR);
active_scb_index = ahc_inb(ahc, SCB_TAG);
if (last_phase != P_BUSFREE
&& (pending_scb->hscb->tag == active_scb_index
|| (flag == SCB_DEVICE_RESET
&& SCSIID_TARGET(ahc, ahc_inb(ahc, SAVED_SCSIID)) == cmd->target))) {
/*
* We're active on the bus, so assert ATN
* and hope that the target responds.
*/
pending_scb = ahc_lookup_scb(ahc, active_scb_index);
pending_scb->flags |= SCB_RECOVERY_SCB|flag;
ahc_outb(ahc, MSG_OUT, HOST_MSG);
ahc_outb(ahc, SCSISIGO, last_phase|ATNO);
printf("%s:%d:%d:%d: Device is active, asserting ATN\n",
ahc_name(ahc), cmd->channel, cmd->target, cmd->lun);
wait = TRUE;
} else if (disconnected) {
/*
* Actually re-queue this SCB in an attempt
* to select the device before it reconnects.
* In either case (selection or reselection),
* we will now issue the approprate message
* to the timed-out device.
*
* Set the MK_MESSAGE control bit indicating
* that we desire to send a message. We
* also set the disconnected flag since
* in the paging case there is no guarantee
* that our SCB control byte matches the
* version on the card. We don't want the
* sequencer to abort the command thinking
* an unsolicited reselection occurred.
*/
pending_scb->hscb->control |= MK_MESSAGE|DISCONNECTED;
pending_scb->flags |= SCB_RECOVERY_SCB|flag;
/*
* Remove any cached copy of this SCB in the
* disconnected list in preparation for the
* queuing of our abort SCB. We use the
* same element in the SCB, SCB_NEXT, for
* both the qinfifo and the disconnected list.
*/
ahc_search_disc_list(ahc, cmd->target, cmd->channel + 'A',
cmd->lun, pending_scb->hscb->tag,
/*stop_on_first*/TRUE,
/*remove*/TRUE,
/*save_state*/FALSE);
/*
* In the non-paging case, the sequencer will
* never re-reference the in-core SCB.
* To make sure we are notified during
* reslection, set the MK_MESSAGE flag in
* the card's copy of the SCB.
*/
if ((ahc->flags & AHC_PAGESCBS) == 0) {
ahc_outb(ahc, SCBPTR, pending_scb->hscb->tag);
ahc_outb(ahc, SCB_CONTROL,
ahc_inb(ahc, SCB_CONTROL)|MK_MESSAGE);
}
/*
* Clear out any entries in the QINFIFO first
* so we are the next SCB for this target
* to run.
*/
ahc_search_qinfifo(ahc, cmd->target, cmd->channel + 'A',
cmd->lun, SCB_LIST_NULL, ROLE_INITIATOR,
CAM_REQUEUE_REQ, SEARCH_COMPLETE);
ahc_print_path(ahc, pending_scb);
printf("Queuing a recovery SCB\n");
ahc_qinfifo_requeue_tail(ahc, pending_scb);
ahc_outb(ahc, SCBPTR, saved_scbptr);
printf("%s:%d:%d:%d: Device is disconnected, re-queuing SCB\n",
ahc_name(ahc), cmd->channel, cmd->target, cmd->lun);
wait = TRUE;
} else {
printf("%s:%d:%d:%d: Unable to deliver message\n",
ahc_name(ahc), cmd->channel, cmd->target, cmd->lun);
retval = FAILED;
goto done;
}
no_cmd:
/*
* Our assumption is that if we don't have the command, no
* recovery action was required, so we return success. Again,
* the semantics of the mid-layer recovery engine are not
* well defined, so this may change in time.
*/
retval = SUCCESS;
done:
if (paused)
ahc_unpause(ahc);
if (wait) {
struct timer_list timer;
int ret;
ahc_unlock(ahc, &s);
init_timer(&timer);
timer.data = (u_long)&ahc->platform_data->eh_sem;
timer.expires = jiffies + (5 * HZ);
timer.function = ahc_linux_sem_timeout;
add_timer(&timer);
printf("Recovery code sleeping\n");
down(&ahc->platform_data->eh_sem);
printf("Recovery code awake\n");
ret = del_timer(&timer);
if (ret == 0) {
printf("Timer Expired\n");
retval = FAILED;
}
ahc_lock(ahc, &s);
}
ahc_linux_run_device_queues(ahc);
acmd = TAILQ_FIRST(&ahc->platform_data->completeq);
TAILQ_INIT(&ahc->platform_data->completeq);
ahc_unlock(ahc, &s);
if (acmd != NULL)
ahc_linux_run_complete_queue(ahc, acmd);
spin_lock_irq(&io_request_lock);
return (retval);
}
/*
* Abort the current SCSI command(s).
*/
int
ahc_linux_abort(Scsi_Cmnd *cmd)
{
int error;
error = ahc_linux_queue_recovery_cmd(cmd, SCB_ABORT);
if (error != 0)
printf("aic7xxx_abort returns 0x%x\n", error);
return (error);
}
/*
* Attempt to send a target reset message to the device that timed out.
*/
int
ahc_linux_dev_reset(Scsi_Cmnd *cmd)
{
int error;
error = ahc_linux_queue_recovery_cmd(cmd, SCB_DEVICE_RESET);
if (error != 0)
printf("aic7xxx_dev_reset returns 0x%x\n", error);
return (error);
}
/*
* Reset the SCSI bus.
*/
int
ahc_linux_bus_reset(Scsi_Cmnd *cmd)
{
struct ahc_softc *ahc;
struct ahc_cmd *acmd;
u_long s;
int found;
/*
* It is a bug that the upper layer takes
* this lock just prior to calling us.
*/
spin_unlock_irq(&io_request_lock);
ahc = *(struct ahc_softc **)cmd->host->hostdata;
ahc_lock(ahc, &s);
found = ahc_reset_channel(ahc, cmd->channel + 'A',
/*initiate reset*/TRUE);
acmd = TAILQ_FIRST(&ahc->platform_data->completeq);
TAILQ_INIT(&ahc->platform_data->completeq);
ahc_unlock(ahc, &s);
if (bootverbose)
printf("%s: SCSI bus reset delivered. "
"%d SCBs aborted.\n", ahc_name(ahc), found);
if (acmd != NULL)
ahc_linux_run_complete_queue(ahc, acmd);
spin_lock_irq(&io_request_lock);
return SUCCESS;
}
/*
* Return the disk geometry for the given SCSI device.
*/
int
ahc_linux_biosparam(Disk *disk, kdev_t dev, int geom[])
{
int heads;
int sectors;
int cylinders;
int ret;
int extended;
struct ahc_softc *ahc;
struct buffer_head *bh;
ahc = *((struct ahc_softc **)disk->device->host->hostdata);
bh = bread(MKDEV(MAJOR(dev), MINOR(dev) & ~0xf), 0, block_size(dev));
if (bh) {
ret = scsi_partsize(bh, disk->capacity,
&geom[2], &geom[0], &geom[1]);
brelse(bh);
if (ret != -1)
return (ret);
}
heads = 64;
sectors = 32;
cylinders = disk->capacity / (heads * sectors);
if (aic7xxx_extended != 0)
extended = 1;
else if (disk->device->channel == 0)
extended = (ahc->flags & AHC_EXTENDED_TRANS_A) != 0;
else
extended = (ahc->flags & AHC_EXTENDED_TRANS_B) != 0;
if (extended && cylinders >= 1024) {
heads = 255;
sectors = 63;
cylinders = disk->capacity / (heads * sectors);
}
geom[0] = heads;
geom[1] = sectors;
geom[2] = cylinders;
return (0);
}
/*
* Free the passed in Scsi_Host memory structures prior to unloading the
* module.
*/
int
ahc_linux_release(struct Scsi_Host * host)
{
struct ahc_softc *ahc;
if (host != NULL) {
ahc = *(struct ahc_softc **)host->hostdata;
ahc_free(ahc);
}
if (TAILQ_EMPTY(&ahc_tailq)) {
unregister_reboot_notifier(&ahc_linux_notifier);
#ifdef CONFIG_PCI
#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)
pci_unregister_driver(&aic7xxx_pci_driver);
#endif
#endif
}
return (0);
}
void
ahc_platform_dump_card_state(struct ahc_softc *ahc)
{
struct ahc_linux_device *dev;
int channel;
int maxchannel;
int target;
int maxtarget;
int lun;
int i;
maxchannel = (ahc->features & AHC_TWIN) ? 1 : 0;
maxtarget = (ahc->features & AHC_WIDE) ? 15 : 7;
for (channel = 0; channel <= maxchannel; channel++) {
for (target = 0; target <=maxtarget; target++) {
for (lun = 0; lun < AHC_NUM_LUNS; lun++) {
struct ahc_cmd *acmd;
dev = ahc_linux_get_device(ahc, channel, target,
lun, /*alloc*/FALSE);
if (dev == NULL)
continue;
printf("DevQ(%d:%d:%d): ",
channel, target, lun);
i = 0;
TAILQ_FOREACH(acmd, &dev->busyq,
acmd_links.tqe) {
if (i++ > 256)
break;
}
printf("%d waiting\n", i);
}
}
}
}
#if defined(MODULE) || LINUX_VERSION_CODE >= KERNEL_VERSION(2,4,0)
static Scsi_Host_Template driver_template = AIC7XXX;
Scsi_Host_Template *aic7xxx_driver_template = &driver_template;
#include "../scsi_module.c"
#endif
|