Viewing file:  parport_amiga.c (7.13 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* Low-level parallel port routines for the Amiga built-in port
*
* Author: Joerg Dorchain <joerg@dorchain.net>
*
* This is a complete rewrite of the code, but based heaviy upon the old
* lp_intern. code.
*
* The built-in Amiga parallel port provides one port at a fixed address
* with 8 bidirectional data lines (D0 - D7) and 3 bidirectional status
* lines (BUSY, POUT, SEL), 1 output control line /STROBE (raised automatically
* in hardware when the data register is accessed), and 1 input control line
* /ACK, able to cause an interrupt, but both not directly settable by
* software.
*/
#include <linux/module.h>
#include <linux/init.h>
#include <linux/parport.h>
#include <linux/ioport.h>
#include <asm/setup.h>
#include <asm/amigahw.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/amigaints.h>
#undef DEBUG
#ifdef DEBUG
#define DPRINTK printk
#else
#define DPRINTK(x...) do { } while (0)
#endif
static struct parport *this_port = NULL;
static void amiga_write_data(struct parport *p, unsigned char data)
{
DPRINTK(KERN_DEBUG "write_data %c\n",data);
/* Triggers also /STROBE. This behavior cannot be changed */
ciaa.prb = data;
mb();
}
static unsigned char amiga_read_data(struct parport *p)
{
/* Triggers also /STROBE. This behavior cannot be changed */
return ciaa.prb;
}
#if 0
static unsigned char control_pc_to_amiga(unsigned char control)
{
unsigned char ret = 0;
if (control & PARPORT_CONTROL_SELECT) /* XXX: What is SELECP? */
;
if (control & PARPORT_CONTROL_INIT) /* INITP */
/* reset connected to cpu reset pin */;
if (control & PARPORT_CONTROL_AUTOFD) /* AUTOLF */
/* Not connected */;
if (control & PARPORT_CONTROL_STROBE) /* Strobe */
/* Handled only directly by hardware */;
return ret;
}
#endif
static unsigned char control_amiga_to_pc(unsigned char control)
{
return PARPORT_CONTROL_SELECT |
PARPORT_CONTROL_AUTOFD | PARPORT_CONTROL_STROBE;
/* fake value: interrupt enable, select in, no reset,
no autolf, no strobe - seems to be closest the wiring diagram */
}
static void amiga_write_control(struct parport *p, unsigned char control)
{
DPRINTK(KERN_DEBUG "write_control %02x\n",control);
/* No implementation possible */
}
static unsigned char amiga_read_control( struct parport *p)
{
DPRINTK(KERN_DEBUG "read_control \n");
return control_amiga_to_pc(0);
}
static unsigned char amiga_frob_control( struct parport *p, unsigned char mask, unsigned char val)
{
unsigned char old;
DPRINTK(KERN_DEBUG "frob_control mask %02x, value %02x\n",mask,val);
old = amiga_read_control(p);
amiga_write_control(p, (old & ~mask) ^ val);
return old;
}
#if 0 /* currently unused */
static unsigned char status_pc_to_amiga(unsigned char status)
{
unsigned char ret = 1;
if (status & PARPORT_STATUS_BUSY) /* Busy */
ret &= ~1;
if (status & PARPORT_STATUS_ACK) /* Ack */
/* handled in hardware */;
if (status & PARPORT_STATUS_PAPEROUT) /* PaperOut */
ret |= 2;
if (status & PARPORT_STATUS_SELECT) /* select */
ret |= 4;
if (status & PARPORT_STATUS_ERROR) /* error */
/* not connected */;
return ret;
}
#endif
static unsigned char status_amiga_to_pc(unsigned char status)
{
unsigned char ret = PARPORT_STATUS_BUSY | PARPORT_STATUS_ACK | PARPORT_STATUS_ERROR;
if (status & 1) /* Busy */
ret &= ~PARPORT_STATUS_BUSY;
if (status & 2) /* PaperOut */
ret |= PARPORT_STATUS_PAPEROUT;
if (status & 4) /* Selected */
ret |= PARPORT_STATUS_SELECT;
/* the rest is not connected or handled autonomously in hardware */
return ret;
}
static unsigned char amiga_read_status(struct parport *p)
{
unsigned char status;
status = status_amiga_to_pc(ciab.pra & 7);
DPRINTK(KERN_DEBUG "read_status %02x\n", status);
return status;
}
/* as this ports irq handling is already done, we use a generic funktion */
static void amiga_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
parport_generic_irq(irq, (struct parport *) dev_id, regs);
}
static void amiga_enable_irq(struct parport *p)
{
enable_irq(IRQ_AMIGA_CIAA_FLG);
}
static void amiga_disable_irq(struct parport *p)
{
disable_irq(IRQ_AMIGA_CIAA_FLG);
}
static void amiga_data_forward(struct parport *p)
{
DPRINTK(KERN_DEBUG "forward\n");
ciaa.ddrb = 0xff; /* all pins output */
mb();
}
static void amiga_data_reverse(struct parport *p)
{
DPRINTK(KERN_DEBUG "reverse\n");
ciaa.ddrb = 0; /* all pins input */
mb();
}
static void amiga_init_state(struct pardevice *dev, struct parport_state *s)
{
s->u.amiga.data = 0;
s->u.amiga.datadir = 255;
s->u.amiga.status = 0;
s->u.amiga.statusdir = 0;
}
static void amiga_save_state(struct parport *p, struct parport_state *s)
{
mb();
s->u.amiga.data = ciaa.prb;
s->u.amiga.datadir = ciaa.ddrb;
s->u.amiga.status = ciab.pra & 7;
s->u.amiga.statusdir = ciab.ddra & 7;
mb();
}
static void amiga_restore_state(struct parport *p, struct parport_state *s)
{
mb();
ciaa.prb = s->u.amiga.data;
ciaa.ddrb = s->u.amiga.datadir;
ciab.pra |= (ciab.pra & 0xf8) | s->u.amiga.status;
ciab.ddra |= (ciab.ddra & 0xf8) | s->u.amiga.statusdir;
mb();
}
static void amiga_inc_use_count(void)
{
MOD_INC_USE_COUNT;
}
static void amiga_dec_use_count(void)
{
MOD_DEC_USE_COUNT;
}
static struct parport_operations pp_amiga_ops = {
amiga_write_data,
amiga_read_data,
amiga_write_control,
amiga_read_control,
amiga_frob_control,
amiga_read_status,
amiga_enable_irq,
amiga_disable_irq,
amiga_data_forward,
amiga_data_reverse,
amiga_init_state,
amiga_save_state,
amiga_restore_state,
amiga_inc_use_count,
amiga_dec_use_count,
parport_ieee1284_epp_write_data,
parport_ieee1284_epp_read_data,
parport_ieee1284_epp_write_addr,
parport_ieee1284_epp_read_addr,
parport_ieee1284_ecp_write_data,
parport_ieee1284_ecp_read_data,
parport_ieee1284_ecp_write_addr,
parport_ieee1284_write_compat,
parport_ieee1284_read_nibble,
parport_ieee1284_read_byte,
};
/* ----------- Initialisation code --------------------------------- */
int __init parport_amiga_init(void)
{
struct parport *p;
int err;
if (!MACH_IS_AMIGA || !AMIGAHW_PRESENT(AMI_PARALLEL))
return -ENODEV;
err = -EBUSY;
if (!request_mem_region(CIAA_PHYSADDR-1+0x100, 0x100, "parallel"))
goto out_mem;
ciaa.ddrb = 0xff;
ciab.ddra &= 0xf8;
mb();
p = parport_register_port((unsigned long)&ciaa.prb, IRQ_AMIGA_CIAA_FLG,
PARPORT_DMA_NONE, &pp_amiga_ops);
if (!p)
goto out_port;
err = request_irq(IRQ_AMIGA_CIAA_FLG, amiga_interrupt, 0, p->name, p);
if (err)
goto out_irq;
this_port = p;
printk(KERN_INFO "%s: Amiga built-in port using irq\n", p->name);
/* XXX: set operating mode */
parport_proc_register(p);
parport_announce_port(p);
return 0;
out_irq:
parport_unregister_port(p);
out_port:
release_mem_region(CIAA_PHYSADDR-1+0x100, 0x100);
out_mem:
return err;
}
void __exit parport_amiga_exit(void)
{
if (this_port->irq != PARPORT_IRQ_NONE)
free_irq(IRQ_AMIGA_CIAA_FLG, this_port);
parport_proc_unregister(this_port);
parport_unregister_port(this_port);
release_mem_region(CIAA_PHYSADDR-1+0x100, 0x100);
}
MODULE_AUTHOR("Joerg Dorchain <joerg@dorchain.net>");
MODULE_DESCRIPTION("Parport Driver for Amiga builtin Port");
MODULE_SUPPORTED_DEVICE("Amiga builtin Parallel Port");
MODULE_LICENSE("GPL");
module_init(parport_amiga_init)
module_exit(parport_amiga_exit)
|