Viewing file:  cmtdef.h (20.71 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/******************************************************************************
*
* (C)Copyright 1998,1999 SysKonnect,
* a business unit of Schneider & Koch & Co. Datensysteme GmbH.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* The information in this file is provided "AS IS" without warranty.
*
******************************************************************************/
#ifndef _CMTDEF_
#define _CMTDEF_
/* **************************************************************** */
/*
* implementation specific constants
* MODIIFY THE FOLLWOING THREE DEFINES
*/
#define AMDPLC /* if Amd PLC chip used */
#ifdef CONC
#define NUMPHYS 12 /* 2 for SAS or DAS, more for Concentrator */
#else
#ifdef CONC_II
#define NUMPHYS 24 /* 2 for SAS or DAS, more for Concentrator */
#else
#define NUMPHYS 2 /* 2 for SAS or DAS, more for Concentrator */
#endif
#endif
#define NUMMACS 1 /* only 1 supported at the moment */
#define NUMPATHS 2 /* primary and secondary path supported */
/*
* DO NOT MODIFY BEYOND THIS POINT
*/
/* **************************************************************** */
#if NUMPHYS > 2
#define CONCENTRATOR
#endif
/*
* Definitions for comfortable LINT usage
*/
#ifdef lint
#define LINT_USE(x) (x)=(x)
#else
#define LINT_USE(x)
#endif
#ifdef DEBUG
#define DB_PR(flag,a,b,c) { if (flag) printf(a,b,c) ; }
#else
#define DB_PR(flag,a,b,c)
#endif
#ifdef DEBUG_BRD
#define DB_ECM(a,b,c) DB_PR((smc->debug.d_smt&1),a,b,c)
#define DB_ECMN(n,a,b,c) DB_PR((smc->debug.d_ecm >=(n)),a,b,c)
#define DB_RMT(a,b,c) DB_PR((smc->debug.d_smt&2),a,b,c)
#define DB_RMTN(n,a,b,c) DB_PR((smc->debug.d_rmt >=(n)),a,b,c)
#define DB_CFM(a,b,c) DB_PR((smc->debug.d_smt&4),a,b,c)
#define DB_CFMN(n,a,b,c) DB_PR((smc->debug.d_cfm >=(n)),a,b,c)
#define DB_PCM(a,b,c) DB_PR((smc->debug.d_smt&8),a,b,c)
#define DB_PCMN(n,a,b,c) DB_PR((smc->debug.d_pcm >=(n)),a,b,c)
#define DB_SMT(a,b,c) DB_PR((smc->debug.d_smtf),a,b,c)
#define DB_SMTN(n,a,b,c) DB_PR((smc->debug.d_smtf >=(n)),a,b,c)
#define DB_SBA(a,b,c) DB_PR((smc->debug.d_sba),a,b,c)
#define DB_SBAN(n,a,b,c) DB_PR((smc->debug.d_sba >=(n)),a,b,c)
#define DB_ESS(a,b,c) DB_PR((smc->debug.d_ess),a,b,c)
#define DB_ESSN(n,a,b,c) DB_PR((smc->debug.d_ess >=(n)),a,b,c)
#else
#define DB_ECM(a,b,c) DB_PR((debug.d_smt&1),a,b,c)
#define DB_ECMN(n,a,b,c) DB_PR((debug.d_ecm >=(n)),a,b,c)
#define DB_RMT(a,b,c) DB_PR((debug.d_smt&2),a,b,c)
#define DB_RMTN(n,a,b,c) DB_PR((debug.d_rmt >=(n)),a,b,c)
#define DB_CFM(a,b,c) DB_PR((debug.d_smt&4),a,b,c)
#define DB_CFMN(n,a,b,c) DB_PR((debug.d_cfm >=(n)),a,b,c)
#define DB_PCM(a,b,c) DB_PR((debug.d_smt&8),a,b,c)
#define DB_PCMN(n,a,b,c) DB_PR((debug.d_pcm >=(n)),a,b,c)
#define DB_SMT(a,b,c) DB_PR((debug.d_smtf),a,b,c)
#define DB_SMTN(n,a,b,c) DB_PR((debug.d_smtf >=(n)),a,b,c)
#define DB_SBA(a,b,c) DB_PR((debug.d_sba),a,b,c)
#define DB_SBAN(n,a,b,c) DB_PR((debug.d_sba >=(n)),a,b,c)
#define DB_ESS(a,b,c) DB_PR((debug.d_ess),a,b,c)
#define DB_ESSN(n,a,b,c) DB_PR((debug.d_ess >=(n)),a,b,c)
#endif
#ifndef SS_NOT_DS
#define SK_LOC_DECL(type,var) type var
#else
#define SK_LOC_DECL(type,var) static type var
#endif
/*
* PHYs and PORTS
* Note: Don't touch the definition of PA and PB. Those might be used
* by some "for" loops.
*/
#define PA 0
#define PB 1
#if defined(SUPERNET_3) || defined(CONC_II)
/*
* The port indices have to be different,
* because the MAC output goes through the 2. PLC
* Conc II: It has to be the first port in the row.
*/
#define PS 0 /* Internal PLC which is the same as PA */
#else
#define PS 1
#endif
#define PM 2 /* PM .. PA+NUM_PHYS-1 */
/*
* PHY types - as in path descriptor 'fddiPHYType'
*/
#define TA 0 /* A port */
#define TB 1 /* B port */
#define TS 2 /* S port */
#define TM 3 /* M port */
#define TNONE 4
/*
* indexes in MIB
*/
#define INDEX_MAC 1
#define INDEX_PATH 1
#define INDEX_PORT 1
/*
* policies
*/
#define POLICY_AA (1<<0) /* reject AA */
#define POLICY_AB (1<<1) /* reject AB */
#define POLICY_AS (1<<2) /* reject AS */
#define POLICY_AM (1<<3) /* reject AM */
#define POLICY_BA (1<<4) /* reject BA */
#define POLICY_BB (1<<5) /* reject BB */
#define POLICY_BS (1<<6) /* reject BS */
#define POLICY_BM (1<<7) /* reject BM */
#define POLICY_SA (1<<8) /* reject SA */
#define POLICY_SB (1<<9) /* reject SB */
#define POLICY_SS (1<<10) /* reject SS */
#define POLICY_SM (1<<11) /* reject SM */
#define POLICY_MA (1<<12) /* reject MA */
#define POLICY_MB (1<<13) /* reject MB */
#define POLICY_MS (1<<14) /* reject MS */
#define POLICY_MM (1<<15) /* reject MM */
/*
* commands
*/
/*
* EVENTS
* event classes
*/
#define EVENT_ECM 1 /* event class ECM */
#define EVENT_CFM 2 /* event class CFM */
#define EVENT_RMT 3 /* event class RMT */
#define EVENT_SMT 4 /* event class SMT */
#define EVENT_PCM 5 /* event class PCM */
#define EVENT_PCMA 5 /* event class PCMA */
#define EVENT_PCMB 6 /* event class PCMB */
/* WARNING :
* EVENT_PCM* must be last in the above list
* if more then two ports are used, EVENT_PCM .. EVENT_PCMA+NUM_PHYS-1
* are used !
*/
#define EV_TOKEN(class,event) (((u_long)(class)<<16L)|((u_long)(event)))
#define EV_T_CLASS(token) ((int)((token)>>16)&0xffff)
#define EV_T_EVENT(token) ((int)(token)&0xffff)
/*
* ECM events
*/
#define EC_CONNECT 1 /* connect request */
#define EC_DISCONNECT 2 /* disconnect request */
#define EC_TRACE_PROP 3 /* trace propagation */
#define EC_PATH_TEST 4 /* path test */
#define EC_TIMEOUT_TD 5 /* timer TD_min */
#define EC_TIMEOUT_TMAX 6 /* timer trace_max */
#define EC_TIMEOUT_IMAX 7 /* timer I_max */
#define EC_TIMEOUT_INMAX 8 /* timer IN_max */
#define EC_TEST_DONE 9 /* path test done */
/*
* CFM events
*/
#define CF_LOOP 1 /* cf_loop flag from PCM */
#define CF_LOOP_A 1 /* cf_loop flag from PCM */
#define CF_LOOP_B 2 /* cf_loop flag from PCM */
#define CF_JOIN 3 /* cf_join flag from PCM */
#define CF_JOIN_A 3 /* cf_join flag from PCM */
#define CF_JOIN_B 4 /* cf_join flag from PCM */
/*
* PCM events
*/
#define PC_START 1
#define PC_STOP 2
#define PC_LOOP 3
#define PC_JOIN 4
#define PC_SIGNAL 5
#define PC_REJECT 6
#define PC_MAINT 7
#define PC_TRACE 8
#define PC_PDR 9
#define PC_ENABLE 10
#define PC_DISABLE 11
/*
* must be ordered as in LineStateType
*/
#define PC_QLS 12
#define PC_ILS 13
#define PC_MLS 14
#define PC_HLS 15
#define PC_LS_PDR 16
#define PC_LS_NONE 17
#define LS2MIB(x) ((x)-PC_QLS)
#define MIB2LS(x) ((x)+PC_QLS)
#define PC_TIMEOUT_TB_MAX 18 /* timer TB_max */
#define PC_TIMEOUT_TB_MIN 19 /* timer TB_min */
#define PC_TIMEOUT_C_MIN 20 /* timer C_Min */
#define PC_TIMEOUT_T_OUT 21 /* timer T_Out */
#define PC_TIMEOUT_TL_MIN 22 /* timer TL_Min */
#define PC_TIMEOUT_T_NEXT 23 /* timer t_next[] */
#define PC_TIMEOUT_LCT 24
#define PC_NSE 25 /* NOISE hardware timer */
#define PC_LEM 26 /* LEM done */
/*
* RMT events meaning from
*/
#define RM_RING_OP 1 /* ring operational MAC */
#define RM_RING_NON_OP 2 /* ring not operational MAC */
#define RM_MY_BEACON 3 /* recvd my beacon MAC */
#define RM_OTHER_BEACON 4 /* recvd other beacon MAC */
#define RM_MY_CLAIM 5 /* recvd my claim MAC */
#define RM_TRT_EXP 6 /* TRT exp MAC */
#define RM_VALID_CLAIM 7 /* claim from dup addr MAC */
#define RM_JOIN 8 /* signal rm_join CFM */
#define RM_LOOP 9 /* signal rm_loop CFM */
#define RM_DUP_ADDR 10 /* dup_addr_test hange SMT-NIF */
#define RM_ENABLE_FLAG 11 /* enable flag */
#define RM_TIMEOUT_NON_OP 12 /* timeout T_Non_OP */
#define RM_TIMEOUT_T_STUCK 13 /* timeout T_Stuck */
#define RM_TIMEOUT_ANNOUNCE 14 /* timeout T_Announce */
#define RM_TIMEOUT_T_DIRECT 15 /* timeout T_Direct */
#define RM_TIMEOUT_D_MAX 16 /* timeout D_Max */
#define RM_TIMEOUT_POLL 17 /* claim/beacon poller */
#define RM_TX_STATE_CHANGE 18 /* To restart timer for D_Max */
/*
* SMT events
*/
#define SM_TIMER 1 /* timer */
#define SM_FAST 2 /* smt_force_irq */
/* PC modes */
#define PM_NONE 0
#define PM_PEER 1
#define PM_TREE 2
/*
* PCM withhold codes
* MIB PC-WithholdType ENUM
*/
#define PC_WH_NONE 0 /* ok */
#define PC_WH_M_M 1 /* M to M */
#define PC_WH_OTHER 2 /* other incompatible phys */
#define PC_WH_PATH 3 /* path not available */
/*
* LCT duration
*/
#define LC_SHORT 1 /* short LCT */
#define LC_MEDIUM 2 /* medium LCT */
#define LC_LONG 3 /* long LCT */
#define LC_EXTENDED 4 /* extended LCT */
/*
* path_test values
*/
#define PT_NONE 0
#define PT_TESTING 1 /* test is running */
#define PT_PASSED 2 /* test passed */
#define PT_FAILED 3 /* test failed */
#define PT_PENDING 4 /* path test follows */
#define PT_EXITING 5 /* disconnected while in trace/leave */
/*
* duplicate address test
* MIB DupAddressTest ENUM
*/
#define DA_NONE 0 /* */
#define DA_PASSED 1 /* test passed */
#define DA_FAILED 2 /* test failed */
/*
* optical bypass
*/
#define BP_DEINSERT 0 /* disable bypass */
#define BP_INSERT 1 /* enable bypass */
/*
* ODL enable/disable
*/
#define PM_TRANSMIT_DISABLE 0 /* disable xmit */
#define PM_TRANSMIT_ENABLE 1 /* enable xmit */
/*
* parameter for config_mux
* note : number is index in config_endec table !
*/
#define MUX_THRUA 0 /* through A */
#define MUX_THRUB 1 /* through B */
#define MUX_WRAPA 2 /* wrap A */
#define MUX_WRAPB 3 /* wrap B */
#define MUX_ISOLATE 4 /* isolated */
#define MUX_WRAPS 5 /* SAS */
/*
* MAC control
*/
#define MA_RESET 0
#define MA_BEACON 1
#define MA_CLAIM 2
#define MA_DIRECTED 3 /* directed beacon */
#define MA_TREQ 4 /* change T_Req */
#define MA_OFFLINE 5 /* switch MAC to offline */
/*
* trace prop
* bit map for trace propagation
*/
#define ENTITY_MAC (NUMPHYS)
#define ENTITY_PHY(p) (p)
#define ENTITY_BIT(m) (1<<(m))
/*
* Resource Tag Types
*/
#define PATH_ISO 0 /* isolated */
#define PATH_PRIM 3 /* primary path */
#define PATH_THRU 5 /* through path */
#define RES_MAC 2 /* resource type MAC */
#define RES_PORT 4 /* resource type PORT */
/*
* CFM state
* oops: MUST MATCH CF-StateType in SMT7.2 !
*/
#define SC0_ISOLATED 0 /* isolated */
#define SC1_WRAP_A 5 /* wrap A (not used) */
#define SC2_WRAP_B 6 /* wrap B (not used) */
#define SC4_THRU_A 12 /* through A */
#define SC5_THRU_B 7 /* through B (used in SMT 6.2) */
#define SC7_WRAP_S 8 /* SAS (not used) */
#define SC9_C_WRAP_A 9 /* c wrap A */
#define SC10_C_WRAP_B 10 /* c wrap B */
#define SC11_C_WRAP_S 11 /* c wrap S */
/*
* convert MIB time in units of 80nS to uS
*/
#define MIB2US(t) ((t)/12)
#define SEC2MIB(s) ((s)*12500000L)
/*
* SMT timer
*/
struct smt_timer {
struct smt_timer *tm_next ; /* linked list */
struct s_smc *tm_smc ; /* pointer to context */
u_long tm_delta ; /* delta time */
u_long tm_token ; /* token value */
u_short tm_active ; /* flag : active/inactive */
u_short tm_pad ; /* pad field */
} ;
/*
* communication structures
*/
struct mac_parameter {
u_long t_neg ; /* T_Neg parameter */
u_long t_pri ; /* T_Pri register in MAC */
} ;
/*
* MAC counters
*/
struct mac_counter {
u_long mac_nobuf_counter ; /* MAC SW counter: no buffer */
u_long mac_r_restart_counter ; /* MAC SW counter: rx restarted */
} ;
/*
* para struct context for SMT parameters
*/
struct s_pcon {
int pc_len ;
int pc_err ;
int pc_badset ;
void *pc_p ;
} ;
/*
* link error monitor
*/
#define LEM_AVG 5
struct lem_counter {
#ifdef AM29K
int lem_on ;
u_long lem_errors ;
u_long lem_symbols ;
u_long lem_tsymbols ;
int lem_s_count ;
int lem_n_s ;
int lem_values ;
int lem_index ;
int lem_avg_ber[LEM_AVG] ;
int lem_sum ;
#else
u_short lem_float_ber ; /* 10E-nn bit error rate */
u_long lem_errors ; /* accumulated error count */
u_short lem_on ;
#endif
} ;
#define NUMBITS 10
#ifdef AMDPLC
/*
* PLC state table
*/
struct s_plc {
u_short p_state ; /* current state */
u_short p_bits ; /* number of bits to send */
u_short p_start ; /* first bit pos */
u_short p_pad ; /* padding for alignment */
u_long soft_err ; /* error counter */
u_long parity_err ; /* error counter */
u_long ebuf_err ; /* error counter */
u_long ebuf_cont ; /* continous error counter */
u_long phyinv ; /* error counter */
u_long vsym_ctr ; /* error counter */
u_long mini_ctr ; /* error counter */
u_long tpc_exp ; /* error counter */
u_long np_err ; /* error counter */
u_long b_pcs ; /* error counter */
u_long b_tpc ; /* error counter */
u_long b_tne ; /* error counter */
u_long b_qls ; /* error counter */
u_long b_ils ; /* error counter */
u_long b_hls ; /* error counter */
} ;
#endif
#ifdef PROTOTYP_INC
#include "fddi/driver.pro"
#else /* PROTOTYP_INC */
/*
* function prototypes
*/
#include "h/mbuf.h" /* Type definitions for MBUFs */
void hwt_restart( /* hwt.c */
#ifdef ANSIC
struct s_smc *smc
#endif
) ;
SMbuf *smt_build_frame( /* smt.c */
#ifdef ANSIC
struct s_smc *smc,
int class,
int type,
int length
#endif
) ;
SMbuf *smt_get_mbuf( /* drvsr.c */
#ifdef ANSIC
struct s_smc *smc
#endif
) ;
void *sm_to_para( /* smt.c */
#ifdef ANSIC
struct s_smc *smc,
struct smt_header *sm,
int para
#endif
) ;
#ifndef SK_UNUSED
#define SK_UNUSED(var) (void)(var)
#endif
void queue_event() ;
void ecm() ;
void ecm_init() ;
void rmt() ;
void rmt_init() ;
void pcm() ;
void pcm_init() ;
void cfm() ;
void cfm_init() ;
void smt_timer_start() ;
void smt_timer_stop() ;
void pcm_status_state() ;
void plc_config_mux() ;
void sm_lem_evaluate() ;
void smt_clear_una_dna() ;
void mac_status_para() ;
void mac_update_counter() ;
void sm_pm_ls_latch() ;
void sm_ma_control() ;
void sm_mac_check_beacon_claim() ;
void config_mux() ;
void smt_agent_init() ;
void smt_timer_init() ;
void smt_received_pack() ;
void smt_add_para() ;
void smt_swap_para() ;
void ev_init() ;
void hwt_init() ;
u_long hwt_read() ;
void hwt_stop() ;
void hwt_start() ;
void smt_send_mbuf() ;
void smt_free_mbuf() ;
void sm_pm_bypass_req() ;
void rmt_indication() ;
void cfm_state_change() ;
void rx_indication() ;
void tx_indication() ;
#ifndef NO_SMT_PANIC
void smt_panic() ;
#else
#ifdef DEBUG
void smt_panic() ;
#else
#define smt_panic(smc,text)
#endif /* DEBUG */
#endif /* NO_SMT_PANIC */
void smt_stat_counter() ;
void smt_timer_poll() ;
u_long smt_get_time() ;
u_long smt_get_tid() ;
void smt_timer_done() ;
void smt_set_defaults() ;
void smt_fixup_mib() ;
void smt_reset_defaults() ;
void smt_agent_task() ;
void smt_please_reconnect() ;
int smt_check_para() ;
void driver_get_bia() ;
#ifdef SUPERNET_3
void drv_reset_indication() ;
#endif /* SUPERNET_3 */
void smt_start_watchdog() ;
void smt_event() ;
void pcm_event() ;
void rmt_event() ;
void cfm_event() ;
void timer_event() ;
void ev_dispatcher() ;
void smt_get_state() ;
void ecm_get_state() ;
void pcm_get_state() ;
void rmt_get_state() ;
void ecm_state_change() ;
int sm_pm_bypass_present() ;
void pcm_state_change() ;
void rmt_state_change() ;
int sm_pm_get_ls() ;
int pcm_get_s_port() ;
int pcm_rooted_station() ;
int cfm_get_mac_input() ;
int cfm_get_mac_output() ;
int port_to_mib() ;
int cem_build_path() ;
int sm_mac_get_tx_state() ;
int is_individual() ;
int is_my_addr() ;
int is_broadcast() ;
int is_equal() ;
char *get_pcmstate() ;
int smt_action() ;
u_short smt_online() ;
void smt_force_irq() ;
void smt_pmf_received_pack() ;
void smt_send_frame() ;
void smt_set_timestamp() ;
void mac_set_rx_mode() ;
int mac_add_multicast() ;
int mac_set_func_addr() ;
void mac_del_multicast() ;
void mac_update_multicast() ;
void mac_clear_multicast() ;
void mac_rx_directed_beacon() ;
void set_formac_tsync() ;
void formac_reinit_tx() ;
void formac_tx_restart() ;
void process_receive() ;
void init_driver_fplus() ;
void rtm_irq() ;
void rtm_set_timer() ;
void ring_status_indication() ;
void llc_recover_tx() ;
void llc_restart_tx() ;
void plc_clear_irq() ;
void plc_irq() ;
int smt_set_mac_opvalues() ;
#ifdef TAG_MODE
void mac_drv_pci_fix() ;
void mac_do_pci_fix() ;
void mac_drv_clear_tx_queue() ;
void mac_drv_repair_descr() ;
u_long hwt_quick_read() ;
void hwt_wait_time() ;
#endif
#ifdef SMT_PNMI
#ifdef ANSIC
int pnmi_init (struct s_smc* smc);
int pnmi_process_ndis_id (struct s_smc* smc, u_long ndis_oid, void* buf,
int len, int* BytesAccessed, int* BytesNeeded, u_char action);
#else
int pnmi_init ();
int pnmi_process_ndis_id ();
#endif
#endif
#ifdef SBA
#ifndef _H2INC
void sba() ;
#endif
void sba_raf_received_pack() ;
void sba_timer_poll() ;
void smt_init_sba() ;
#endif
#ifdef ESS
int ess_raf_received_pack() ;
void ess_timer_poll() ;
void ess_para_change() ;
#endif
#ifdef BOOT
#define smt_srf_event(a,b,c,d)
#define smt_init_evc(a)
#else
void smt_init_evc() ;
void smt_srf_event() ;
#endif
#ifndef SMT_REAL_TOKEN_CT
void smt_emulate_token_ct();
#endif
#if defined(DEBUG) && !defined(BOOT)
void dump_smt() ;
#else
#define dump_smt(smc,sm,text)
#endif
#ifdef DEBUG
char *addr_to_string() ;
void dump_hex() ;
#endif
#endif /* PROTOTYP_INC */
/* PNMI default defines */
#ifndef PNMI_INIT
#define PNMI_INIT(smc) /* Nothing */
#endif
#ifndef PNMI_GET_ID
#define PNMI_GET_ID( smc, ndis_oid, buf, len, BytesWritten, BytesNeeded ) \
( 1 ? (-1) : (-1) )
#endif
#ifndef PNMI_SET_ID
#define PNMI_SET_ID( smc, ndis_oid, buf, len, BytesRead, BytesNeeded, \
set_type) ( 1 ? (-1) : (-1) )
#endif
/*
* SMT_PANIC defines
*/
#ifndef SMT_PANIC
#define SMT_PANIC(smc,nr,msg) smt_panic (smc, msg)
#endif
#ifndef SMT_ERR_LOG
#define SMT_ERR_LOG(smc,nr,msg) SMT_PANIC (smc, nr, msg)
#endif
#ifndef SMT_EBASE
#define SMT_EBASE 100
#endif
#define SMT_E0100 SMT_EBASE + 0
#define SMT_E0100_MSG "cfm FSM: illegal ce_type"
#define SMT_E0101 SMT_EBASE + 1
#define SMT_E0101_MSG "CEM: case ???"
#define SMT_E0102 SMT_EBASE + 2
#define SMT_E0102_MSG "CEM A: illegal state"
#define SMT_E0103 SMT_EBASE + 3
#define SMT_E0103_MSG "CEM B: illegal state"
#define SMT_E0104 SMT_EBASE + 4
#define SMT_E0104_MSG "CEM M: illegal state"
#define SMT_E0105 SMT_EBASE + 5
#define SMT_E0105_MSG "CEM S: illegal state"
#define SMT_E0106 SMT_EBASE + 6
#define SMT_E0106_MSG "CFM : illegal state"
#define SMT_E0107 SMT_EBASE + 7
#define SMT_E0107_MSG "ECM : illegal state"
#define SMT_E0108 SMT_EBASE + 8
#define SMT_E0108_MSG "prop_actions : NAC in DAS CFM"
#define SMT_E0109 SMT_EBASE + 9
#define SMT_E0109_MSG "ST2U.FM_SERRSF error in special frame"
#define SMT_E0110 SMT_EBASE + 10
#define SMT_E0110_MSG "ST2U.FM_SRFRCTOV recv. count. overflow"
#define SMT_E0111 SMT_EBASE + 11
#define SMT_E0111_MSG "ST2U.FM_SNFSLD NP & FORMAC simult. load"
#define SMT_E0112 SMT_EBASE + 12
#define SMT_E0112_MSG "ST2U.FM_SRCVFRM single-frame recv.-mode"
#define SMT_E0113 SMT_EBASE + 13
#define SMT_E0113_MSG "FPLUS: Buffer Memory Error"
#define SMT_E0114 SMT_EBASE + 14
#define SMT_E0114_MSG "ST2U.FM_SERRSF error in special frame"
#define SMT_E0115 SMT_EBASE + 15
#define SMT_E0115_MSG "ST3L: parity error in receive queue 2"
#define SMT_E0116 SMT_EBASE + 16
#define SMT_E0116_MSG "ST3L: parity error in receive queue 1"
#define SMT_E0117 SMT_EBASE + 17
#define SMT_E0117_MSG "E_SMT_001: RxD count for receive queue 1 = 0"
#define SMT_E0118 SMT_EBASE + 18
#define SMT_E0118_MSG "PCM : illegal state"
#define SMT_E0119 SMT_EBASE + 19
#define SMT_E0119_MSG "smt_add_para"
#define SMT_E0120 SMT_EBASE + 20
#define SMT_E0120_MSG "smt_set_para"
#define SMT_E0121 SMT_EBASE + 21
#define SMT_E0121_MSG "illegal event in dispatcher"
#define SMT_E0122 SMT_EBASE + 22
#define SMT_E0122_MSG "RMT : illegal state"
#define SMT_E0123 SMT_EBASE + 23
#define SMT_E0123_MSG "SBA: state machine has illegal state"
#define SMT_E0124 SMT_EBASE + 24
#define SMT_E0124_MSG "sba_free_session() called with NULL pointer"
#define SMT_E0125 SMT_EBASE + 25
#define SMT_E0125_MSG "SBA : illegal session pointer"
#define SMT_E0126 SMT_EBASE + 26
#define SMT_E0126_MSG "smt_free_mbuf() called with NULL pointer\n"
#define SMT_E0127 SMT_EBASE + 27
#define SMT_E0127_MSG "sizeof evcs"
#define SMT_E0128 SMT_EBASE + 28
#define SMT_E0128_MSG "evc->evc_cond_state = 0"
#define SMT_E0129 SMT_EBASE + 29
#define SMT_E0129_MSG "evc->evc_multiple = 0"
#define SMT_E0130 SMT_EBASE + 30
#define SMT_E0130_MSG write_mdr_warning
#define SMT_E0131 SMT_EBASE + 31
#define SMT_E0131_MSG cam_warning
#define SMT_E0132 SMT_EBASE + 32
#define SMT_E0132_MSG "ST1L.FM_SPCEPDx parity/coding error"
#define SMT_E0133 SMT_EBASE + 33
#define SMT_E0133_MSG "ST1L.FM_STBURx tx buffer underrun"
#define SMT_E0134 SMT_EBASE + 34
#define SMT_E0134_MSG "ST1L.FM_SPCEPDx parity error"
#define SMT_E0135 SMT_EBASE + 35
#define SMT_E0135_MSG "RMT: duplicate MAC address detected. Ring left!"
#define SMT_E0136 SMT_EBASE + 36
#define SMT_E0136_MSG "Elasticity Buffer hang-up"
#define SMT_E0137 SMT_EBASE + 37
#define SMT_E0137_MSG "SMT: queue overrun"
#define SMT_E0138 SMT_EBASE + 38
#define SMT_E0138_MSG "RMT: duplicate MAC address detected. Ring NOT left!"
#endif /* _CMTDEF_ */
|