Viewing file:  skgesirq.h (6.35 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/******************************************************************************
*
* Name: skgesirq.h
* Project: GEnesis, PCI Gigabit Ethernet Adapter
* Version: $Revision: 1.22 $
* Date: $Date: 2000/11/09 11:30:10 $
* Purpose: SK specific Gigabit Ethernet special IRQ functions
*
******************************************************************************/
/******************************************************************************
*
* (C)Copyright 1998-2000 SysKonnect GmbH.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* The information in this file is provided "AS IS" without warranty.
*
******************************************************************************/
/******************************************************************************
*
* History:
* $Log: skgesirq.h,v $
* Revision 1.22 2000/11/09 11:30:10 rassmann
* WA: Waiting after releasing reset until BCom chip is accessible.
*
* Revision 1.21 2000/10/18 12:22:40 cgoos
* Added workaround for half duplex hangup.
*
* Revision 1.20 1999/12/06 10:00:44 cgoos
* Added SET event for role.
*
* Revision 1.19 1999/11/22 13:58:26 cgoos
* Changed license header to GPL.
*
* Revision 1.18 1999/05/19 07:32:59 cgoos
* Changes for 1000Base-T.
*
* Revision 1.17 1999/03/12 13:29:31 malthoff
* Move Autonegotiation Error Codes to skgeinit.h.
*
* Revision 1.16 1999/03/08 10:11:28 gklug
* add: AutoNegDone return codes
*
* Revision 1.15 1998/11/18 13:20:53 gklug
* add: different timeouts for active and non-active links
*
* Revision 1.14 1998/11/04 07:18:14 cgoos
* Added prototype for SkXmRxTxEnable.
*
* Revision 1.13 1998/10/21 05:52:23 gklug
* add: parameter DoLoop to InitPhy function
*
* Revision 1.12 1998/10/19 06:45:03 cgoos
* Added prototype for SkXmInitPhy.
*
* Revision 1.11 1998/10/15 14:34:10 gklug
* add: WA_TIME is 500 msec
*
* Revision 1.10 1998/10/14 14:49:41 malthoff
* Remove err log defines E021 and E022. They are
* defined in skgeinit.h now.
*
* Revision 1.9 1998/10/14 14:00:39 gklug
* add: eroor logs for init phys
*
* Revision 1.8 1998/10/14 05:44:05 gklug
* add: E020
*
* Revision 1.7 1998/10/02 06:24:58 gklug
* add: error messages
*
* Revision 1.6 1998/10/01 07:54:45 gklug
* add: PNMI debug module
*
* Revision 1.5 1998/09/28 13:36:31 malthoff
* Move the bit definitions for Autonegotiation
* and Flow Control to skgeinit.h.
*
* Revision 1.4 1998/09/15 12:29:34 gklug
* add: error logs
*
* Revision 1.3 1998/09/03 13:54:02 gklug
* add: function prototypes
*
* Revision 1.2 1998/09/03 10:24:36 gklug
* add: Events send by PNMI
* add: parameter definition for Flow Control etc.
*
* Revision 1.1 1998/08/27 11:50:27 gklug
* initial revision
*
*
******************************************************************************/
#ifndef _INC_SKGESIRQ_H_
#define _INC_SKGESIRQ_H_
/*
* Define the Event the special IRQ/INI module can handle
*/
#define SK_HWEV_WATIM 1 /* Timeout for WA errata #2 XMAC */
#define SK_HWEV_PORT_START 2 /* Port Start Event by RLMT */
#define SK_HWEV_PORT_STOP 3 /* Port Stop Event by RLMT */
#define SK_HWEV_CLEAR_STAT 4 /* Clear Statistics by PNMI */
#define SK_HWEV_UPDATE_STAT 5 /* Update Statistics by PNMI */
#define SK_HWEV_SET_LMODE 6 /* Set Link Mode by PNMI */
#define SK_HWEV_SET_FLOWMODE 7 /* Set Flow Control Mode by PNMI */
#define SK_HWEV_SET_ROLE 8 /* Set Master/Slave (Role) by PNMI */
#define SK_HWEV_HALFDUP_CHK 9 /* Set Master/Slave (Role) by PNMI */
#define SK_WA_ACT_TIME (5000000L) /* 5 sec */
#define SK_WA_INA_TIME (100000L) /* 100 msec */
#define SK_HALFDUP_CHK_TIME (10000L) /* 10 msec */
/*
* Define the error numbers and messages
*/
#define SKERR_SIRQ_E001 (SK_ERRBASE_SIRQ+0)
#define SKERR_SIRQ_E001MSG "Unknown event"
#define SKERR_SIRQ_E002 (SKERR_SIRQ_E001+1)
#define SKERR_SIRQ_E002MSG "Packet timeout RX1"
#define SKERR_SIRQ_E003 (SKERR_SIRQ_E002+1)
#define SKERR_SIRQ_E003MSG "Packet timeout RX2"
#define SKERR_SIRQ_E004 (SKERR_SIRQ_E003+1)
#define SKERR_SIRQ_E004MSG "XMAC 1 not correctly initialized"
#define SKERR_SIRQ_E005 (SKERR_SIRQ_E004+1)
#define SKERR_SIRQ_E005MSG "XMAC 2 not correctly initialized"
#define SKERR_SIRQ_E006 (SKERR_SIRQ_E005+1)
#define SKERR_SIRQ_E006MSG "CHECK failure R1"
#define SKERR_SIRQ_E007 (SKERR_SIRQ_E006+1)
#define SKERR_SIRQ_E007MSG "CHECK failure R2"
#define SKERR_SIRQ_E008 (SKERR_SIRQ_E007+1)
#define SKERR_SIRQ_E008MSG "CHECK failure XS1"
#define SKERR_SIRQ_E009 (SKERR_SIRQ_E008+1)
#define SKERR_SIRQ_E009MSG "CHECK failure XA1"
#define SKERR_SIRQ_E010 (SKERR_SIRQ_E009+1)
#define SKERR_SIRQ_E010MSG "CHECK failure XS2"
#define SKERR_SIRQ_E011 (SKERR_SIRQ_E010+1)
#define SKERR_SIRQ_E011MSG "CHECK failure XA2"
#define SKERR_SIRQ_E012 (SKERR_SIRQ_E011+1)
#define SKERR_SIRQ_E012MSG "unexpected IRQ Master error"
#define SKERR_SIRQ_E013 (SKERR_SIRQ_E012+1)
#define SKERR_SIRQ_E013MSG "unexpected IRQ Status error"
#define SKERR_SIRQ_E014 (SKERR_SIRQ_E013+1)
#define SKERR_SIRQ_E014MSG "Parity error on RAM (read)"
#define SKERR_SIRQ_E015 (SKERR_SIRQ_E014+1)
#define SKERR_SIRQ_E015MSG "Parity error on RAM (write)"
#define SKERR_SIRQ_E016 (SKERR_SIRQ_E015+1)
#define SKERR_SIRQ_E016MSG "Parity error MAC 1"
#define SKERR_SIRQ_E017 (SKERR_SIRQ_E016+1)
#define SKERR_SIRQ_E017MSG "Parity error MAC 2"
#define SKERR_SIRQ_E018 (SKERR_SIRQ_E017+1)
#define SKERR_SIRQ_E018MSG "Parity error RX 1"
#define SKERR_SIRQ_E019 (SKERR_SIRQ_E018+1)
#define SKERR_SIRQ_E019MSG "Parity error RX 2"
#define SKERR_SIRQ_E020 (SKERR_SIRQ_E019+1)
#define SKERR_SIRQ_E020MSG "XMAC transmit FIFO underrun"
#define SKERR_SIRQ_E021 (SKERR_SIRQ_E020+1)
#define SKERR_SIRQ_E021MSG "Spurious I2C interrupt"
#define SKERR_SIRQ_E022 (SKERR_SIRQ_E020+1)
#define SKERR_SIRQ_E022MSG "Cable pair swap error"
extern void SkGeSirqIsr(SK_AC *pAC, SK_IOC IoC, SK_U32 Istatus);
extern int SkGeSirqEvent(SK_AC *pAC, SK_IOC IoC, SK_U32 Event, SK_EVPARA Para);
extern void SkXmInitPhy( SK_AC *pAC, SK_IOC IoC, int Port, SK_BOOL DoLoop);
extern int SkXmRxTxEnable(SK_AC *pAC, SK_IOC IoC, int Port);
extern void SkHWLinkUp(SK_AC *pAC, SK_IOC IoC, int Port);
extern void SkHWLinkDown(SK_AC *pAC, SK_IOC IoC, int Port);
#endif /* _INC_SKGESIRQ_H_ */
|