Viewing file:  skgeinit.h (23.38 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/******************************************************************************
*
* Name: skgeinit.h
* Project: GEnesis, PCI Gigabit Ethernet Adapter
* Version: $Revision: 1.51 $
* Date: $Date: 2001/02/09 12:26:38 $
* Purpose: Structures and prototypes for the GE Init Module
*
******************************************************************************/
/******************************************************************************
*
* (C)Copyright 1998-2001 SysKonnect GmbH.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* The information in this file is provided "AS IS" without warranty.
*
******************************************************************************/
/******************************************************************************
*
* History:
*
* $Log: skgeinit.h,v $
* Revision 1.51 2001/02/09 12:26:38 cgoos
* Inserted #ifdef DIAG for half duplex workaround timer.
*
* Revision 1.50 2001/02/07 07:56:40 rassmann
* Corrected copyright.
*
* Revision 1.49 2001/01/31 15:32:18 gklug
* fix: problem with autosensing an SR8800 switch
* add: counter for autoneg timeouts
*
* Revision 1.48 2000/11/09 11:30:10 rassmann
* WA: Waiting after releasing reset until BCom chip is accessible.
*
* Revision 1.47 2000/10/18 12:22:40 cgoos
* Added workaround for half duplex hangup.
*
* Revision 1.46 2000/08/10 11:28:00 rassmann
* Editorial changes.
* Preserving 32-bit alignment in structs for the adapter context.
*
* Revision 1.45 1999/11/22 13:56:19 cgoos
* Changed license header to GPL.
*
* Revision 1.44 1999/10/26 07:34:15 malthoff
* The define SK_LNK_ON has been lost in v1.41.
*
* Revision 1.43 1999/10/06 09:30:16 cgoos
* Changed SK_XM_THR_JUMBO.
*
* Revision 1.42 1999/09/16 12:58:26 cgoos
* Changed SK_LED_STANDY macro to be independent of HW link sync.
*
* Revision 1.41 1999/07/30 06:56:14 malthoff
* Correct comment for SK_MS_STAT_UNSET.
*
* Revision 1.40 1999/05/27 13:38:46 cgoos
* Added SK_BMU_TX_WM.
* Made SK_BMU_TX_WM and SK_BMU_RX_WM user-definable.
* Changed XMAC Tx treshold to max. values.
*
* Revision 1.39 1999/05/20 14:35:26 malthoff
* Remove prototypes for SkGeLinkLED().
*
* Revision 1.38 1999/05/19 11:59:12 cgoos
* Added SK_MS_CAP_INDETERMINATED define.
*
* Revision 1.37 1999/05/19 07:32:33 cgoos
* Changes for 1000Base-T.
* LED-defines for HWAC_LINK_LED macro.
*
* Revision 1.36 1999/04/08 14:00:24 gklug
* add:Port struct field PLinkResCt
*
* Revision 1.35 1999/03/25 07:43:07 malthoff
* Add error string for SKERR_HWI_E018MSG.
*
* Revision 1.34 1999/03/12 16:25:57 malthoff
* Remove PPollRxD and PPollTxD.
* Add SKERR_HWI_E017MSG. and SK_DPOLL_MAX.
*
* Revision 1.33 1999/03/12 13:34:41 malthoff
* Add Autonegotiation error codes.
* Change defines for parameter Mode in SkXmSetRxCmd().
* Replace __STDC__ by SK_KR_PROTO.
*
* Revision 1.32 1999/01/25 14:40:20 mhaveman
* Added new return states for the virtual management port if multiple
* ports are active but differently configured.
*
* Revision 1.31 1998/12/11 15:17:02 gklug
* add: Link partnet autoneg states : Unknown Manual and Autonegotiation
*
* Revision 1.30 1998/12/07 12:17:04 gklug
* add: Link Partner autonegotiation flag
*
* Revision 1.29 1998/12/01 10:54:42 gklug
* add: variables for XMAC Errata
*
* Revision 1.28 1998/12/01 10:14:15 gklug
* add: PIsave saves the Interrupt status word
*
* Revision 1.27 1998/11/26 15:24:52 mhaveman
* Added link status states SK_LMODE_STAT_AUTOHALF and
* SK_LMODE_STAT_AUTOFULL which are used by PNMI.
*
* Revision 1.26 1998/11/26 14:53:01 gklug
* add:autoNeg Timeout variable
*
* Revision 1.25 1998/11/26 08:58:50 gklug
* add: Link Mode configuration (AUTO Sense mode)
*
* Revision 1.24 1998/11/24 13:30:27 gklug
* add: PCheckPar to port struct
*
* Revision 1.23 1998/11/18 13:23:26 malthoff
* Add SK_PKT_TO_MAX.
*
* Revision 1.22 1998/11/18 13:19:54 gklug
* add: PPrevShorts and PLinkBroken to port struct for WA XMAC Errata #C1
*
* Revision 1.21 1998/10/26 08:02:57 malthoff
* Add GIRamOffs.
*
* Revision 1.20 1998/10/19 07:28:37 malthoff
* Add prototyp for SkGeInitRamIface().
*
* Revision 1.19 1998/10/14 14:47:48 malthoff
* SK_TIMER should not be defined for Diagnostics.
* Add SKERR_HWI_E015MSG and SKERR_HWI_E016MSG.
*
* Revision 1.18 1998/10/14 14:00:03 gklug
* add: timer to port struct for workaround of Errata #2
*
* Revision 1.17 1998/10/14 11:23:09 malthoff
* Add prototype for SkXmAutoNegDone().
* Fix SkXmSetRxCmd() prototype statement.
*
* Revision 1.16 1998/10/14 05:42:29 gklug
* add: HWLinkUp flag to Port struct
*
* Revision 1.15 1998/10/09 08:26:33 malthoff
* Rename SK_RB_ULPP_B to SK_RB_LLPP_B.
*
* Revision 1.14 1998/10/09 07:11:13 malthoff
* bug fix: SK_FACT_53 is 85 not 117.
* Rework time out init values.
* Add GIPortUsage and corresponding defines.
* Add some error log messages.
*
* Revision 1.13 1998/10/06 14:13:14 malthoff
* Add prototyp for SkGeLoadLnkSyncCnt().
*
* Revision 1.12 1998/10/05 11:29:53 malthoff
* bug fix: A comment was not closed.
*
* Revision 1.11 1998/10/05 08:01:59 malthoff
* Add default Timeout- Threshold- and
* Watermark constants. Add QRam start and end
* variables. Also add vars to store the polling
* mode and receive command. Add new Error Log
* Messages and function prototypes.
*
* Revision 1.10 1998/09/28 13:34:48 malthoff
* Add mode bits for LED functions.
* Move Autoneg and Flow Ctrl bits from shgesirq.h
* Add the required Error Log Entries
* and Function Prototypes.
*
* Revision 1.9 1998/09/16 14:38:41 malthoff
* Rework the SK_LNK_xxx defines.
* Add error log message defines.
* Add prototypes for skxmac2.c
*
* Revision 1.8 1998/09/11 05:29:18 gklug
* add: init state of a port
*
* Revision 1.7 1998/09/08 08:35:52 gklug
* add: defines of the Init Levels
*
* Revision 1.6 1998/09/03 13:48:42 gklug
* add: Link strati, capabilities to Port struct
*
* Revision 1.5 1998/09/03 13:30:59 malthoff
* Add SK_LNK_BLINK and SK_LNK_PERM.
*
* Revision 1.4 1998/09/03 09:55:31 malthoff
* Add constants for parameters Dir and RstMode
* when calling SkGeStopPort().
* Rework the prototyp section.
* Add Queue Address offsets PRxQOff, PXsQOff, and PXaQOff.
* Remove Ioc with IoC.
*
* Revision 1.3 1998/08/19 09:11:54 gklug
* fix: struct are removed from c-source (see CCC)
* add: typedefs for all structs
*
* Revision 1.2 1998/07/28 12:38:26 malthoff
* The prototypes got the parameter 'IoC'.
*
* Revision 1.1 1998/07/23 09:50:24 malthoff
* Created.
*
*
******************************************************************************/
#ifndef __INC_SKGEINIT_H_
#define __INC_SKGEINIT_H_
#ifdef __cplusplus
extern "C" {
#endif /* __cplusplus */
/* defines ********************************************************************/
/*
* defines for modifying Link LED behaviour (has been used with SkGeLinkLED())
*/
#define SK_LNK_OFF LED_OFF
#define SK_LNK_ON (LED_ON | LED_BLK_OFF| LED_SYNC_OFF)
#define SK_LNK_BLINK (LED_ON | LED_BLK_ON | LED_SYNC_ON)
#define SK_LNK_PERM (LED_ON | LED_BLK_OFF| LED_SYNC_ON)
#define SK_LNK_TST (LED_ON | LED_BLK_ON | LED_SYNC_OFF)
/*
* defines for parameter 'Mode' when calling SK_HWAC_LINK_LED()
*/
#define SK_LED_OFF LED_OFF
#define SK_LED_ACTIVE (LED_ON | LED_BLK_OFF| LED_SYNC_OFF)
#define SK_LED_STANDBY (LED_ON | LED_BLK_ON| LED_SYNC_OFF)
/*
* defines for parameter 'Mode' when calling SkGeXmitLED()
*/
#define SK_LED_DIS 0
#define SK_LED_ENA 1
#define SK_LED_TST 2
/*
* Counter and Timer constants, for a host clock of 62.5 MHz
*/
#define SK_XMIT_DUR 0x002faf08L /* 50 ms */
#define SK_BLK_DUR 0x01dcd650L /* 500 ms */
#define SK_DPOLL_DEF 0x00EE6B28L /* 250 ms */
#define SK_DPOLL_MAX 0x00FFFFFFL /* ca. 268ms */
#define SK_FACT_62 100 /* is given in percent */
#define SK_FACT_53 85
/*
* Timeout values
*/
#define SK_MAC_TO_53 72 /* MAC arbiter timeout */
#define SK_PKT_TO_53 0x2000 /* Packet arbiter timeout */
#define SK_PKT_TO_MAX 0xffff /* Maximum value */
#define SK_RI_TO_53 36 /* RAM interface timeout */
/*
* RAM Buffer High Pause Threshold values
*/
#define SK_RB_ULPP ( 8 * 1024) /* Upper Level in kB/8 */
#define SK_RB_LLPP_S (10 * 1024) /* Lower Level for small Queues */
#define SK_RB_LLPP_B (16 * 1024) /* Lower Level for big Queues */
#ifndef SK_BMU_RX_WM
#define SK_BMU_RX_WM 0x600 /* BMU Rx Watermark */
#endif
#ifndef SK_BMU_TX_WM
#define SK_BMU_TX_WM 0x600 /* BMU Rx Watermark */
#endif
/* XMAC II Tx Threshold */
#define SK_XM_THR_REDL 0x01fb /* .. for redundant link usage */
#define SK_XM_THR_SL 0x01fb /* .. for single link adapters */
#define SK_XM_THR_MULL 0x01fb /* .. for multiple link usage */
#define SK_XM_THR_JUMBO 0x03fc /* .. for jumbo frame usage */
/* values for GIPortUsage */
#define SK_RED_LINK 1 /* redundant link usage */
#define SK_MUL_LINK 2 /* multiple link usage */
#define SK_JUMBO_LINK 3 /* driver uses jumbo frames */
/* Minimum RAM Buffer Receive Queue Size */
#define SK_MIN_RXQ_SIZE 16 /* 16 kB */
/*
* defines for parameter 'Dir' when calling SkGeStopPort()
*/
#define SK_STOP_TX 1 /* Stops the transmit path, resets the XMAC */
#define SK_STOP_RX 2 /* Stops the receive path */
#define SK_STOP_ALL 3 /* Stops rx and tx path, resets the XMAC */
/*
* defines for parameter 'RstMode' when calling SkGeStopPort()
*/
#define SK_SOFT_RST 1 /* perform a software reset */
#define SK_HARD_RST 2 /* perform a hardware reset */
/*
* Define Init Levels
*/
#define SK_INIT_DATA 0 /* Init level 0: init data structures */
#define SK_INIT_IO 1 /* Init level 1: init with IOs */
#define SK_INIT_RUN 2 /* Init level 2: init for run time */
/*
* Set Link Mode Parameter
*/
#define SK_LMODE_HALF 1 /* Half Duplex Mode */
#define SK_LMODE_FULL 2 /* Full Duplex Mode */
#define SK_LMODE_AUTOHALF 3 /* AutoHalf Duplex Mode */
#define SK_LMODE_AUTOFULL 4 /* AutoFull Duplex Mode */
#define SK_LMODE_AUTOBOTH 5 /* AutoBoth Duplex Mode */
#define SK_LMODE_AUTOSENSE 6 /* configured mode auto sensing */
#define SK_LMODE_INDETERMINATED 7 /* Return value for virtual port if
* multiple ports are differently
* configured.
*/
/*
* Autonegotiation timeout in 100ms granularity.
*/
#define SK_AND_MAX_TO 6 /* Wait 600 msec before link comes up */
/*
* Define Autonegotiation error codes here
*/
#define SK_AND_OK 0 /* no error */
#define SK_AND_OTHER 1 /* other error than below */
#define SK_AND_DUP_CAP 2 /* Duplex capabilities error */
/*
* Link Capability value
*/
#define SK_LMODE_CAP_HALF (1<<0) /* Half Duplex Mode */
#define SK_LMODE_CAP_FULL (1<<1) /* Full Duplex Mode */
#define SK_LMODE_CAP_AUTOHALF (1<<2) /* AutoHalf Duplex Mode */
#define SK_LMODE_CAP_AUTOFULL (1<<3) /* AutoFull Duplex Mode */
#define SK_LMODE_CAP_INDETERMINATED (1<<4) /* Return value for virtual port if
* multiple ports are differently
* configured.
*/
/*
* Link mode current state
*/
#define SK_LMODE_STAT_UNKNOWN 1 /* Unknown Duplex Mode */
#define SK_LMODE_STAT_HALF 2 /* Half Duplex Mode */
#define SK_LMODE_STAT_FULL 3 /* Full Duplex Mode */
#define SK_LMODE_STAT_AUTOHALF 4 /* Half Duplex Mode obtained by AutoNeg */
#define SK_LMODE_STAT_AUTOFULL 5 /* Half Duplex Mode obtained by AutoNeg */
#define SK_LMODE_STAT_INDETERMINATED 6 /* Return value for virtual port if
* multiple ports are differently
* configured.
*/
/*
* Set Flow Control Mode Parameter (and capabilities)
*/
#define SK_FLOW_MODE_NONE 1 /* No Flow Control */
#define SK_FLOW_MODE_LOC_SEND 2 /* Local station sends PAUSE */
#define SK_FLOW_MODE_SYMMETRIC 3 /* Both station may send PAUSE */
#define SK_FLOW_MODE_SYM_OR_REM 4 /* Both station may send PAUSE or
* just the remote station may send
* PAUSE
*/
#define SK_FLOW_MODE_INDETERMINATED 5 /* Return value for virtual port if
* multiple ports are differently
* configured.
*/
/*
* Flow Control Status Parameter
*/
#define SK_FLOW_STAT_NONE 1 /* No Flow Control */
#define SK_FLOW_STAT_REM_SEND 2 /* Remote Station sends PAUSE */
#define SK_FLOW_STAT_LOC_SEND 3 /* Local station sends PAUSE */
#define SK_FLOW_STAT_SYMMETRIC 4 /* Both station may send PAUSE */
#define SK_FLOW_STAT_INDETERMINATED 5 /* Return value for virtual port if
* multiple ports are differently
* configured.
*/
/*
* Master/Slave Mode capabilities
*/
#define SK_MS_CAP_AUTO (1<<0) /* Automatic resolution */
#define SK_MS_CAP_MASTER (1<<1) /* This station is master */
#define SK_MS_CAP_SLAVE (1<<2) /* This station is slave */
#define SK_MS_CAP_INDETERMINATED (1<<3) /* Return value for virtual port if
* multiple ports are differently
* configured.
*/
/*
* Set Master/Slave Mode Parameter (and capabilities)
*/
#define SK_MS_MODE_AUTO 1 /* Automatic resolution */
#define SK_MS_MODE_MASTER 2 /* This station is master */
#define SK_MS_MODE_SLAVE 3 /* This station is slave */
#define SK_MS_MODE_INDETERMINATED 4 /* Return value for virtual port if
* multiple ports are differently
*/
/*
* Master/Slave Status Parameter
*/
#define SK_MS_STAT_UNSET 1 /* The MS status is never been determ*/
#define SK_MS_STAT_MASTER 2 /* This station is master */
#define SK_MS_STAT_SLAVE 3 /* This station is slave */
#define SK_MS_STAT_FAULT 4 /* MS resolution failed */
#define SK_MS_STAT_INDETERMINATED 5 /* Return value for virtual port if
* multiple ports are differently
*/
/*
* defines for parameter 'Mode' when calling SkXmSetRxCmd()
*/
#define SK_STRIP_FCS_ON (1<<0) /* Enable FCS stripping of rx frames */
#define SK_STRIP_FCS_OFF (1<<1) /* Disable FCS stripping of rx frames */
#define SK_STRIP_PAD_ON (1<<2) /* Enable pad byte stripping of rx f */
#define SK_STRIP_PAD_OFF (1<<3) /* Disable pad byte stripping of rx f */
#define SK_LENERR_OK_ON (1<<4) /* Don't chk fr for in range len error*/
#define SK_LENERR_OK_OFF (1<<5) /* Check frames for in range len error*/
#define SK_BIG_PK_OK_ON (1<<6) /* Don't set rcvError bit for big fr */
#define SK_BIG_PK_OK_OFF (1<<7) /* Set rcvError bit for big frames */
/*
* States of PState
*/
#define SK_PRT_RESET 0 /* the port is reset */
#define SK_PRT_STOP 1 /* the port is stopped (similar to sw reset) */
#define SK_PRT_INIT 2 /* the port is initialized */
#define SK_PRT_RUN 3 /* the port has an active link */
/*
* Default receive frame limit for Workaround of XMAC Errata
*/
#define SK_DEF_RX_WA_LIM SK_CONSTU64(100)
/*
* Define link partner Status
*/
#define SK_LIPA_UNKNOWN 0 /* Link partner is in unknown state */
#define SK_LIPA_MANUAL 1 /* Link partner is in detected manual state */
#define SK_LIPA_AUTO 2 /* Link partner is in autonegotiation state */
/*
* Define Maximum Restarts before restart is ignored (3com WA)
*/
#define SK_MAX_LRESTART 3 /* Max. 3 times the link is restarted */
/*
* define max. autonegotiation timeouts before link detection in sense mode is
* reset.
*/
#define SK_MAX_ANEG_TO 10 /* Max. 10 times the sense mode is reset */
/* structures *****************************************************************/
/*
* Port Structure
*/
typedef struct s_GePort {
#ifndef SK_DIAG
SK_TIMER PWaTimer; /* Workaround Timer */
#endif
SK_U64 PPrevShorts; /* Previous short Counter checking */
SK_U64 PPrevRx; /* Previous RxOk Counter checking */
SK_U64 PPrevFcs; /* Previous FCS Error Counter checking */
SK_U64 PRxLim; /* Previous RxOk Counter checking */
SK_U64 LastOctets; /* For half duplex hang check */
#ifndef SK_DIAG
SK_TIMER HalfDupChkTimer;
#endif
int PLinkResCt; /* Link Restart Counter */
int PAutoNegTimeOut;/* AutoNegotiation timeout current value */
int PAutoNegTOCt; /* AutoNeg Timeout Counter */
int PRxQSize; /* Port Rx Queue Size in kB */
int PXSQSize; /* Port Synchronous Transmit Queue Size in kB */
int PXAQSize; /* Port Asynchronous Transmit Queue Size in kB*/
SK_U32 PRxQRamStart; /* Receive Queue RAM Buffer Start Address */
SK_U32 PRxQRamEnd; /* Receive Queue RAM Buffer End Address */
SK_U32 PXsQRamStart; /* Sync Tx Queue RAM Buffer Start Address */
SK_U32 PXsQRamEnd; /* Sync Tx Queue RAM Buffer End Address */
SK_U32 PXaQRamStart; /* Async Tx Queue RAM Buffer Start Address */
SK_U32 PXaQRamEnd; /* Async Tx Queue RAM Buffer End Address */
int PRxQOff; /* Rx Queue Address Offset */
int PXsQOff; /* Synchronous Tx Queue Address Offset */
int PXaQOff; /* Asynchronous Tx Queue Address Offset */
int PhyType; /* PHY used on this port */
SK_U16 PhyAddr; /* MDIO/MDC PHY address */
SK_U16 PRxCmd; /* Port Receive Command Configuration Value */
SK_U16 PIsave; /* Saved Interrupt status word */
SK_U16 PSsave; /* Saved PHY status word */
SK_U16 Align01;
SK_BOOL PHWLinkUp; /* The hardware Link is up (wireing) */
SK_BOOL PState; /* Is port initialized ? */
SK_BOOL PLinkBroken; /* Is Link broken ? */
SK_BOOL PCheckPar; /* Do we check for parity errors ? */
SK_BOOL HalfDupTimerActive;
SK_U8 PLinkCap; /* Link Capabilities */
SK_U8 PLinkModeConf; /* Link Mode configured */
SK_U8 PLinkMode; /* Link Mode currently used */
SK_U8 PLinkModeStatus;/* Link Mode Status */
SK_U8 PFlowCtrlCap; /* Flow Control Capabilities */
SK_U8 PFlowCtrlMode; /* Flow Control Mode */
SK_U8 PFlowCtrlStatus;/* Flow Control Status */
SK_U8 PMSCap; /* Master/Slave Capabilities */
SK_U8 PMSMode; /* Master/Slave Mode */
SK_U8 PMSStatus; /* Master/Slave Status */
SK_U8 PAutoNegFail; /* Autonegotiation fail flag */
SK_U8 PLipaAutoNeg; /* Autonegotiation possible with Link Partner */
SK_U8 Align02;
} SK_GEPORT;
/*
* Gigabit Ethernet Initalization Struct
* (has to be included in the adapter context)
*/
typedef struct s_GeInit {
int GIMacsFound; /* Number of MACs found on this adapter */
int GIPciHwRev; /* PCI HW Revision Number */
SK_U32 GIRamOffs; /* RAM Address Offset for addr calculation */
int GIRamSize; /* The RAM size of the adapter in kB */
int GIHstClkFact; /* Host Clock Factor (62.5 / HstClk * 100) */
int GIPortUsage; /* driver port usage: SK_RED_LINK/SK_MUL_LINK */
SK_U32 GIPollTimerVal; /* Descriptor Poll Timer Init Val in clk ticks*/
int GILevel; /* Initialization Level Completed */
SK_GEPORT GP[SK_MAX_MACS];/* Port Dependent Information */
SK_BOOL GIAnyPortAct; /* Is True if one or more port is initialized */
SK_U8 Align01;
SK_U16 Align02;
} SK_GEINIT;
/*
* Define the error numbers and messages for xmac_ii.c and skgeinit.c
*/
#define SKERR_HWI_E001 (SK_ERRBASE_HWINIT)
#define SKERR_HWI_E001MSG "SkXmClrExactAddr() has got illegal parameters"
#define SKERR_HWI_E002 (SKERR_HWI_E001+1)
#define SKERR_HWI_E002MSG "SkGeInit() Level 1 call missing"
#define SKERR_HWI_E003 (SKERR_HWI_E002+1)
#define SKERR_HWI_E003MSG "SkGeInit() called with illegal init Level"
#define SKERR_HWI_E004 (SKERR_HWI_E003+1)
#define SKERR_HWI_E004MSG "SkGeInitPort() Queue size illegal configured"
#define SKERR_HWI_E005 (SKERR_HWI_E004+1)
#define SKERR_HWI_E005MSG "SkGeInitPort() cannot init running ports"
#define SKERR_HWI_E006 (SKERR_HWI_E005+1)
#define SKERR_HWI_E006MSG "SkGeXmInit(): PState does not match HW state"
#define SKERR_HWI_E007 (SKERR_HWI_E006+1)
#define SKERR_HWI_E007MSG "SkXmInitDupMd() called with invalid Dup Mode"
#define SKERR_HWI_E008 (SKERR_HWI_E007+1)
#define SKERR_HWI_E008MSG "SkXmSetRxCmd() called with invalid Mode"
#define SKERR_HWI_E009 (SKERR_HWI_E008+1)
#define SKERR_HWI_E009MSG "SkGeCfgSync() called although PXSQSize zero"
#define SKERR_HWI_E010 (SKERR_HWI_E009+1)
#define SKERR_HWI_E010MSG "SkGeCfgSync() called with invalid parameters"
#define SKERR_HWI_E011 (SKERR_HWI_E010+1)
#define SKERR_HWI_E011MSG "SkGeInitPort() Receive Queue Size to small"
#define SKERR_HWI_E012 (SKERR_HWI_E011+1)
#define SKERR_HWI_E012MSG "SkGeInitPort() invalid Queue Size specified"
#define SKERR_HWI_E013 (SKERR_HWI_E012+1)
#define SKERR_HWI_E013MSG "SkGeInitPort() cfg changed for running queue"
#define SKERR_HWI_E014 (SKERR_HWI_E013+1)
#define SKERR_HWI_E014MSG "SkGeInitPort() unknown GIPortUsage specified"
#define SKERR_HWI_E015 (SKERR_HWI_E014+1)
#define SKERR_HWI_E015MSG "Illegal Link mode parameter"
#define SKERR_HWI_E016 (SKERR_HWI_E015+1)
#define SKERR_HWI_E016MSG "Illegal Flow control mode parameter"
#define SKERR_HWI_E017 (SKERR_HWI_E016+1)
#define SKERR_HWI_E017MSG "Illegal value specified for GIPollTimerVal"
#define SKERR_HWI_E018 (SKERR_HWI_E017+1)
#define SKERR_HWI_E018MSG "FATAL: SkGeStopPort() does not terminate"
#define SKERR_HWI_E019 (SKERR_HWI_E018+1)
#define SKERR_HWI_E019MSG ""
/* function prototypes ********************************************************/
#ifndef SK_KR_PROTO
/*
* public functions in skgeinit.c
*/
extern void SkGePollRxD(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_BOOL PollRxD);
extern void SkGePollTxD(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_BOOL PollTxD);
extern void SkGeYellowLED(
SK_AC *pAC,
SK_IOC IoC,
int State);
extern int SkGeCfgSync(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_U32 IntTime,
SK_U32 LimCount,
int SyncMode);
extern void SkGeLoadLnkSyncCnt(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_U32 CntVal);
extern void SkGeStopPort(
SK_AC *pAC,
SK_IOC IoC,
int Port,
int Dir,
int RstMode);
extern int SkGeInit(
SK_AC *pAC,
SK_IOC IoC,
int Level);
extern void SkGeDeInit(
SK_AC *pAC,
SK_IOC IoC);
extern int SkGeInitPort(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern void SkGeXmitLED(
SK_AC *pAC,
SK_IOC IoC,
int Led,
int Mode);
extern void SkGeInitRamIface(
SK_AC *pAC,
SK_IOC IoC);
/*
* public functions in skxmac2.c
*/
extern void SkXmSetRxCmd(
SK_AC *pAC,
SK_IOC IoC,
int Port,
int Mode);
extern void SkXmClrExactAddr(
SK_AC *pAC,
SK_IOC IoC,
int Port,
int StartNum,
int StopNum);
extern void SkXmFlushTxFifo(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern void SkXmFlushRxFifo(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern void SkXmSoftRst(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern void SkXmHardRst(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern void SkXmInitMac(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern void SkXmInitDupMd(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern void SkXmInitPauseMd(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern int SkXmAutoNegDone(
SK_AC *pAC,
SK_IOC IoC,
int Port);
extern void SkXmAutoNegLipaXmac(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_U16 IStatus);
extern void SkXmAutoNegLipaBcom(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_U16 IStatus);
extern void SkXmAutoNegLipaLone(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_U16 IStatus);
extern void SkXmIrq(
SK_AC *pAC,
SK_IOC IoC,
int Port,
SK_U16 IStatus);
#else /* SK_KR_PROTO */
/*
* public functions in skgeinit.c
*/
extern void SkGePollRxD();
extern void SkGePollTxD();
extern void SkGeYellowLED();
extern int SkGeCfgSync();
extern void SkGeLoadLnkSyncCnt();
extern void SkGeStopPort();
extern int SkGeInit();
extern void SkGeDeInit();
extern int SkGeInitPort();
extern void SkGeXmitLED();
extern void SkGeInitRamIface();
/*
* public functions in skxmac2.c
*/
extern void SkXmSetRxCmd();
extern void SkXmClrExactAddr();
extern void SkXmFlushTxFifo();
extern void SkXmFlushRxFifo();
extern void SkXmSoftRst();
extern void SkXmHardRst();
extern void SkXmInitMac();
extern void SkXmInitDupMd();
extern void SkXmInitPauseMd();
extern int SkXmAutoNegDone();
extern void SkXmAutoNegLipa();
extern void SkXmIrq();
#endif /* SK_KR_PROTO */
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* __INC_SKGEINIT_H_ */
|