Viewing file:  skdebug.h (3.76 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/******************************************************************************
*
* Name: skdebug.h
* Project: GEnesis, PCI Gigabit Ethernet Adapter
* Version: $Revision: 1.10 $
* Date: $Date: 1999/11/22 13:47:40 $
* Purpose: SK specific DEBUG support
*
******************************************************************************/
/******************************************************************************
*
* (C)Copyright 1998,1999 SysKonnect,
* a business unit of Schneider & Koch & Co. Datensysteme GmbH.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* The information in this file is provided "AS IS" without warranty.
*
******************************************************************************/
/******************************************************************************
*
* History:
* $Log: skdebug.h,v $
* Revision 1.10 1999/11/22 13:47:40 cgoos
* Changed license header to GPL.
*
* Revision 1.9 1999/09/14 14:02:43 rwahl
* Added SK_DBGMOD_PECP.
*
* Revision 1.8 1998/11/25 08:31:54 gklug
* fix: no C++ comments allowed in common sources
*
* Revision 1.7 1998/11/24 16:47:24 swolf
* Driver may now define its own SK_DBG_MSG() (eg. in "h/skdrv1st.h").
*
* Revision 1.6 1998/10/28 10:23:55 rassmann
* ADDED SK_DBGMOD_ADDR.
*
* Revision 1.5 1998/10/22 09:43:55 gklug
* add: CSUM module
*
* Revision 1.4 1998/10/01 07:54:44 gklug
* add: PNMI debug module
*
* Revision 1.3 1998/09/18 08:32:34 afischer
* Macros changed according ssr-spec.:
* SK_DBG_MODCHK -> SK_DBG_CHKMOD
* SK_DBG_CATCHK -> SK_DBG_CHKCAT
*
* Revision 1.2 1998/07/03 14:38:25 malthoff
* Add category SK_DBGCAT_FATAL.
*
* Revision 1.1 1998/06/19 13:39:01 malthoff
* created.
*
*
******************************************************************************/
#ifndef __INC_SKDEBUG_H
#define __INC_SKDEBUG_H
#ifdef DEBUG
#ifndef SK_DBG_MSG
#define SK_DBG_MSG(pAC,comp,cat,arg) \
if ( ((comp) & SK_DBG_CHKMOD(pAC)) && \
((cat) & SK_DBG_CHKCAT(pAC)) ) { \
SK_DBG_PRINTF arg ; \
}
#endif
#else
#define SK_DBG_MSG(pAC,comp,lev,arg)
#endif
/* PLS NOTE:
* =========
* Due to any restrictions of kernel printf routines do not use other
* format identifiers as: %x %d %c %s .
* Never use any combined format identifiers such as: %lx %ld in your
* printf - argument (arg) because some OS specific kernel printfs may
* only support some basic identifiers.
*/
/* Debug modules */
#define SK_DBGMOD_MERR 0x00000001L /* general module error indication */
#define SK_DBGMOD_HWM 0x00000002L /* Hardware init module */
#define SK_DBGMOD_RLMT 0x00000004L /* RLMT module */
#define SK_DBGMOD_VPD 0x00000008L /* VPD module */
#define SK_DBGMOD_I2C 0x00000010L /* I2C module */
#define SK_DBGMOD_PNMI 0x00000020L /* PNMI module */
#define SK_DBGMOD_CSUM 0x00000040L /* CSUM module */
#define SK_DBGMOD_ADDR 0x00000080L /* ADDR module */
#define SK_DBGMOD_PECP 0x00000100L /* PECP module */
/* Debug events */
#define SK_DBGCAT_INIT 0x00000001L /* module/driver initialization */
#define SK_DBGCAT_CTRL 0x00000002L /* controlling: add/rmv MCA/MAC
* and other controls (IOCTL)
*/
#define SK_DBGCAT_ERR 0x00000004L /* error handling paths */
#define SK_DBGCAT_TX 0x00000008L /* transmit path */
#define SK_DBGCAT_RX 0x00000010L /* receive path */
#define SK_DBGCAT_IRQ 0x00000020L /* general IRQ handling */
#define SK_DBGCAT_QUEUE 0x00000040L /* any queue management */
#define SK_DBGCAT_DUMP 0x00000080L /* large data output e.g. hex dump */
#define SK_DBGCAT_FATAL 0x00000100L /* large data output e.g. hex dump */
#endif /* __INC_SKDEBUG_H */
|