!C99Shell v. 1.0 pre-release build #13!

Software: Apache/2.0.54 (Unix) mod_perl/1.99_09 Perl/v5.8.0 mod_ssl/2.0.54 OpenSSL/0.9.7l DAV/2 FrontPage/5.0.2.2635 PHP/4.4.0 mod_gzip/2.0.26.1a 

uname -a: Linux snow.he.net 4.4.276-v2-mono-1 #1 SMP Wed Jul 21 11:21:17 PDT 2021 i686 

uid=99(nobody) gid=98(nobody) groups=98(nobody) 

Safe-mode: OFF (not secure)

/usr/src/linux-2.4.18-xfs-1.1/drivers/net/pcmcia/   drwxr-xr-x
Free 318.33 GB of 458.09 GB (69.49%)
Home    Back    Forward    UPDIR    Refresh    Search    Buffer    Encoder    Tools    Proc.    FTP brute    Sec.    SQL    PHP-code    Update    Feedback    Self remove    Logout    


Viewing file:     wavelan_cs.h (29.05 KB)      -rw-r--r--
Select action/file-type:
(+) | (+) | (+) | Code (+) | Session (+) | (+) | SDB (+) | (+) | (+) | (+) | (+) | (+) |
/*
 *    Wavelan Pcmcia driver
 *
 *        Jean II - HPLB '96
 *
 * Reorganisation and extension of the driver.
 *
 * This file contain all definition and declarations necessary for the
 * wavelan pcmcia driver. This file is a private header, so it should
 * be included only on wavelan_cs.c !!!
 */

#ifndef WAVELAN_CS_H
#define WAVELAN_CS_H

/************************** DOCUMENTATION **************************/
/*
 * This driver provide a Linux interface to the Wavelan Pcmcia hardware
 * The Wavelan is a product of Lucent (http://www.wavelan.com/).
 * This division was formerly part of NCR and then AT&T.
 * Wavelan are also distributed by DEC (RoamAbout DS)...
 *
 * To know how to use this driver, read the PCMCIA HOWTO.
 * If you want to exploit the many other fonctionalities, look comments
 * in the code...
 *
 * This driver is the result of the effort of many peoples (see below).
 */

/* ------------------------ SPECIFIC NOTES ------------------------ */
/*
 * Web page
 * --------
 *    I try to maintain a web page with the Wireless LAN Howto at :
 *        http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/Wavelan.html
 *
 * Debugging and options
 * ---------------------
 *    You will find below a set of '#define" allowing a very fine control
 *    on the driver behaviour and the debug messages printed.
 *    The main options are :
 *    o WAVELAN_ROAMING, for the experimental roaming support.
 *    o SET_PSA_CRC, to have your card correctly recognised by
 *      an access point and the Point-to-Point diagnostic tool.
 *    o USE_PSA_CONFIG, to read configuration from the PSA (EEprom)
 *      (otherwise we always start afresh with some defaults)
 *
 * wavelan_cs.o is darn too big
 * -------------------------
 *    That's true ! There is a very simple way to reduce the driver
 *    object by 33% (yes !). Comment out the following line :
 *        #include <linux/wireless.h>
 *    Other compile options can also reduce the size of it...
 *
 * MAC address and hardware detection :
 * ----------------------------------
 *    The detection code of the wavelan chech that the first 3
 *    octets of the MAC address fit the company code. This type of
 *    detection work well for AT&T cards (because the AT&T code is
 *    hardcoded in wavelan.h), but of course will fail for other
 *    manufacturer.
 *
 *    If you are sure that your card is derived from the wavelan,
 *    here is the way to configure it :
 *    1) Get your MAC address
 *        a) With your card utilities (wfreqsel, instconf, ...)
 *        b) With the driver :
 *            o compile the kernel with DEBUG_CONFIG_INFO enabled
 *            o Boot and look the card messages
 *    2) Set your MAC code (3 octets) in MAC_ADDRESSES[][3] (wavelan.h)
 *    3) Compile & verify
 *    4) Send me the MAC code - I will include it in the next version...
 *
 */

/* --------------------- WIRELESS EXTENSIONS --------------------- */
/*
 * This driver is the first one to support "wireless extensions".
 * This set of extensions provide you some way to control the wireless
 * caracteristics of the hardware in a standard way and support for
 * applications for taking advantage of it (like Mobile IP).
 *
 * You will need to enable the CONFIG_NET_RADIO define in the kernel
 * configuration to enable the wireless extensions (this is the one
 * giving access to the radio network device choice).
 *
 * It might also be a good idea as well to fetch the wireless tools to
 * configure the device and play a bit.
 */

/* ---------------------------- FILES ---------------------------- */
/*
 * wavelan_cs.c :    The actual code for the driver - C functions
 *
 * wavelan_cs.h :    Private header : local types / vars for the driver
 *
 * wavelan.h :        Description of the hardware interface & structs
 *
 * i82593.h :        Description if the Ethernet controller
 */

/* --------------------------- HISTORY --------------------------- */
/*
 * The history of the Wavelan drivers is as complicated as history of
 * the Wavelan itself (NCR -> AT&T -> Lucent).
 *
 * All started with Anders Klemets <klemets@paul.rutgers.edu>,
 * writting a Wavelan ISA driver for the MACH microkernel. Girish
 * Welling <welling@paul.rutgers.edu> had also worked on it.
 * Keith Moore modify this for the Pcmcia hardware.
 * 
 * Robert Morris <rtm@das.harvard.edu> port these two drivers to BSDI
 * and add specific Pcmcia support (there is currently no equivalent
 * of the PCMCIA package under BSD...).
 *
 * Jim Binkley <jrb@cs.pdx.edu> port both BSDI drivers to FreeBSD.
 *
 * Bruce Janson <bruce@cs.usyd.edu.au> port the BSDI ISA driver to Linux.
 *
 * Anthony D. Joseph <adj@lcs.mit.edu> started modify Bruce driver
 * (with help of the BSDI PCMCIA driver) for PCMCIA.
 * Yunzhou Li <yunzhou@strat.iol.unh.edu> finished is work.
 * Joe Finney <joe@comp.lancs.ac.uk> patched the driver to start
 * correctly 2.00 cards (2.4 GHz with frequency selection).
 * David Hinds <dhinds@pcmcia.sourceforge.org> integrated the whole in his
 * Pcmcia package (+ bug corrections).
 *
 * I (Jean Tourrilhes - jt@hplb.hpl.hp.com) then started to make some
 * patchs to the Pcmcia driver. After, I added code in the ISA driver
 * for Wireless Extensions and full support of frequency selection
 * cards. Now, I'm doing the same to the Pcmcia driver + some
 * reorganisation.
 * Loeke Brederveld <lbrederv@wavelan.com> from Lucent has given me
 * much needed informations on the Wavelan hardware.
 */

/* By the way : for the copyright & legal stuff :
 * Almost everybody wrote code under GNU or BSD license (or alike),
 * and want that their original copyright remain somewhere in the
 * code (for myself, I go with the GPL).
 * Nobody want to take responsibility for anything, except the fame...
 */

/* --------------------------- CREDITS --------------------------- */
/*
 * Credits:
 *    Special thanks to Jan Hoogendoorn of AT&T GIS Utrecht and
 *    Loeke Brederveld of Lucent for providing extremely useful
 *    information about WaveLAN PCMCIA hardware
 *
 *    This driver is based upon several other drivers, in particular:
 *    David Hinds' Linux driver for the PCMCIA 3c589 ethernet adapter
 *    Bruce Janson's Linux driver for the AT-bus WaveLAN adapter
 *    Anders Klemets' PCMCIA WaveLAN adapter driver
 *    Robert Morris' BSDI driver for the PCMCIA WaveLAN adapter
 *
 * Additional Credits:
 *
 *    This software was originally developed under Linux 1.2.3
 *    (Slackware 2.0 distribution).
 *    And then under Linux 2.0.x (Debian 1.1 - pcmcia 2.8.18-23) with
 *    HP OmniBook 4000 & 5500.
 *
 *    It is based on other device drivers and information either written
 *    or supplied by:
 *    James Ashton (jaa101@syseng.anu.edu.au),
 *    Ajay Bakre (bakre@paul.rutgers.edu),
 *    Donald Becker (becker@super.org),
 *    Jim Binkley <jrb@cs.pdx.edu>,
 *    Loeke Brederveld <lbrederv@wavelan.com>,
 *    Allan Creighton (allanc@cs.su.oz.au),
 *    Brent Elphick <belphick@uwaterloo.ca>,
 *    Joe Finney <joe@comp.lancs.ac.uk>,
 *    Matthew Geier (matthew@cs.su.oz.au),
 *    Remo di Giovanni (remo@cs.su.oz.au),
 *    Mark Hagan (mhagan@wtcpost.daytonoh.NCR.COM),
 *    David Hinds <dhinds@pcmcia.sourceforge.org>,
 *    Jan Hoogendoorn (c/o marteijn@lucent.com),
 *      Bruce Janson <bruce@cs.usyd.edu.au>,
 *    Anthony D. Joseph <adj@lcs.mit.edu>,
 *    Anders Klemets (klemets@paul.rutgers.edu),
 *    Yunzhou Li <yunzhou@strat.iol.unh.edu>,
 *    Marc Meertens (mmeertens@lucent.com),
 *    Keith Moore,
 *    Robert Morris (rtm@das.harvard.edu),
 *    Ian Parkin (ian@cs.su.oz.au),
 *    John Rosenberg (johnr@cs.su.oz.au),
 *    George Rossi (george@phm.gov.au),
 *    Arthur Scott (arthur@cs.su.oz.au),
 *    Stanislav Sinyagin <stas@isf.ru>
 *    Peter Storey,
 *    Jean Tourrilhes <jt@hpl.hp.com>,
 *    Girish Welling (welling@paul.rutgers.edu)
 *    Clark Woodworth <clark@hiway1.exit109.com>
 *    Yongguang Zhang <ygz@isl.hrl.hac.com>...
 */

/* ------------------------- IMPROVEMENTS ------------------------- */
/*
 * I proudly present :
 *
 * Changes made in 2.8.22 :
 * ----------------------
 *    - improved wv_set_multicast_list
 *    - catch spurious interrupt
 *    - correct release of the device
 *
 * Changes mades in release :
 * ------------------------
 *    - Reorganisation of the code, function name change
 *    - Creation of private header (wavelan_cs.h)
 *    - Reorganised debug messages
 *    - More comments, history, ...
 *    - Configure earlier (in "insert" instead of "open")
 *        and do things only once
 *    - mmc_init : configure the PSA if not done
 *    - mmc_init : 2.00 detection better code for 2.00 init
 *    - better info at startup
 *    - Correct a HUGE bug (volatile & uncalibrated busy loop)
 *      in wv_82593_cmd => config speedup
 *    - Stop receiving & power down on close (and power up on open)
 *      use "ifconfig down" & "ifconfig up ; route add -net ..."
 *    - Send packets : add watchdog instead of pooling
 *    - Receive : check frame wrap around & try to recover some frames
 *    - wavelan_set_multicast_list : avoid reset
 *    - add wireless extensions (ioctl & get_wireless_stats)
 *      get/set nwid/frequency on fly, info for /proc/net/wireless
 *    - Suppress useless stuff from lp (net_local), but add link
 *    - More inlines
 *    - Lot of others minor details & cleanups
 *
 * Changes made in second release :
 * ------------------------------
 *    - Optimise wv_85893_reconfig stuff, fix potential problems
 *    - Change error values for ioctl
 *    - Non blocking wv_ru_stop() + call wv_reset() in case of problems
 *    - Remove development printk from wavelan_watchdog()
 *    - Remove of the watchdog to wavelan_close instead of wavelan_release
 *      fix potential problems...
 *    - Start debugging suspend stuff (but it's still a bit weird)
 *    - Debug & optimize dump header/packet in Rx & Tx (debug)
 *    - Use "readb" and "writeb" to be kernel 2.1 compliant
 *    - Better handling of bogus interrupts
 *    - Wireless extension : SETSPY and GETSPY
 *    - Remove old stuff (stats - for those needing it, just ask me...)
 *    - Make wireless extensions optional
 *
 * Changes made in third release :
 * -----------------------------
 *    - cleanups & typos
 *    - modif wireless ext (spy -> only one pointer)
 *    - new private ioctl to set/get quality & level threshold
 *    - Init : correct default value of level threshold for pcmcia
 *    - kill watchdog in hw_reset
 *    - more 2.1 support (copy_to/from_user instead of memcpy_to/fromfs)
 *    - Add message level (debug stuff in /var/adm/debug & errors not
 *      displayed at console and still in /var/adm/messages)
 *
 * Changes made in fourth release :
 * ------------------------------
 *    - multicast support (yes !) thanks to Yongguang Zhang.
 *
 * Changes made in fifth release (2.9.0) :
 * -------------------------------------
 *    - Revisited multicast code (it was mostly wrong).
 *    - protect code in wv_82593_reconfig with dev->tbusy (oups !)
 *
 * Changes made in sixth release (2.9.1a) :
 * --------------------------------------
 *    - Change the detection code for multi manufacturer code support
 *    - Correct bug (hang kernel) in init when we were "rejecting" a card 
 *
 * Changes made in seventh release (2.9.1b) :
 * ----------------------------------------
 *    - Update to wireless extensions changes
 *    - Silly bug in card initial configuration (psa_conf_status)
 *
 * Changes made in eigth release :
 * -----------------------------
 *    - Small bug in debug code (probably not the last one...)
 *    - 1.2.13 support (thanks to Clark Woodworth)
 *
 * Changes made for release in 2.9.2b :
 * ----------------------------------
 *    - Level threshold is now a standard wireless extension (version 4 !)
 *    - modules parameters types for kernel > 2.1.17
 *    - updated man page
 *    - Others cleanup from David Hinds
 *
 * Changes made for release in 2.9.5 :
 * ---------------------------------
 *    - byte count stats (courtesy of David Hinds)
 *    - Remove dev_tint stuff (courtesy of David Hinds)
 *    - Others cleanup from David Hinds
 *    - Encryption setting from Brent Elphick (thanks a lot !)
 *    - 'base' to 'u_long' for the Alpha (thanks to Stanislav Sinyagin)
 *
 * Changes made for release in 2.9.6 :
 * ---------------------------------
 *    - fix bug : no longuer disable watchdog in case of bogus interrupt
 *    - increase timeout in config code for picky hardware
 *    - mask unused bits in status (Wireless Extensions)
 *
 * Changes integrated by Justin Seger <jseger@MIT.EDU> & David Hinds :
 * -----------------------------------------------------------------
 *    - Roaming "hack" from Joe Finney <joe@comp.lancs.ac.uk>
 *    - PSA CRC code from Bob Gray <rgray@bald.cs.dartmouth.edu>
 *    - Better initialisation of the i82593 controller
 *      from Joseph K. O'Sullivan <josullvn+@cs.cmu.edu>
 *
 * Changes made for release in 3.0.10 :
 * ----------------------------------
 *    - Fix eject "hang" of the driver under 2.2.X :
 *        o create wv_flush_stale_links()
 *        o Rename wavelan_release to wv_pcmcia_release & move up
 *        o move unregister_netdev to wavelan_detach()
 *        o wavelan_release() no longer call wavelan_detach()
 *        o Suppress "release" timer
 *        o Other cleanups & fixes
 *    - New MAC address in the probe
 *    - Reorg PSA_CRC code (endian neutral & cleaner)
 *    - Correct initialisation of the i82593 from Lucent manual
 *    - Put back the watchdog, with larger timeout
 *    - TRANSMIT_NO_CRC is a "normal" error, so recover from it
 *      from Derrick J Brashear <shadow@dementia.org>
 *    - Better handling of TX and RX normal failure conditions
 *    - #ifdef out all the roaming code
 *    - Add ESSID & "AP current address" ioctl stubs
 *    - General cleanup of the code
 *
 * Changes made for release in 3.0.13 :
 * ----------------------------------
 *    - Re-enable compilation of roaming code by default, but with
 *      do_roaming = 0
 *    - Nuke `nwid=nwid^ntohs(beacon->domain_id)' in wl_roam_gather
 *      at the demand of John Carol Langford <jcl@gs176.sp.cs.cmu.edu>
 *    - Introduced WAVELAN_ROAMING_EXT for incomplete ESSID stuff.
 *
 * Changes made for release in 3.0.15 :
 * ----------------------------------
 *    - Change e-mail and web page addresses
 *    - Watchdog timer is now correctly expressed in HZ, not in jiffies
 *    - Add channel number to the list of frequencies in range
 *    - Add the (short) list of bit-rates in range
 *    - Developp a new sensitivity... (sens.value & sens.fixed)
 *
 * Changes made for release in 3.1.2 :
 * ---------------------------------
 *    - Fix check for root permission (break instead of exit)
 *    - New nwid & encoding setting (Wireless Extension 9)
 *
 * Wishes & dreams:
 * ----------------
 *    - Cleanup and integrate the roaming code
 *      (std debug, set DomainID, decay avg and co...)
 */

/***************************** INCLUDES *****************************/

/* Linux headers that we need */
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/ptrace.h>
#include <linux/slab.h>
#include <linux/string.h>
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/in.h>
#include <linux/delay.h>
#include <asm/uaccess.h>
#include <asm/io.h>
#include <asm/system.h>
#include <asm/bitops.h>

#include <linux/netdevice.h>
#include <linux/etherdevice.h>
#include <linux/skbuff.h>
#include <linux/if_arp.h>
#include <linux/ioport.h>
#include <linux/fcntl.h>

#ifdef CONFIG_NET_PCMCIA_RADIO
#include <linux/wireless.h>        /* Wireless extensions */
#endif    /* CONFIG_NET_PCMCIA_RADIO */

/* Pcmcia headers that we need */
#include <pcmcia/cs_types.h>
#include <pcmcia/cs.h>
#include <pcmcia/cistpl.h>
#include <pcmcia/cisreg.h>
#include <pcmcia/ds.h>
#include <pcmcia/version.h>

/* Wavelan declarations */
#include "i82593.h"    /* Definitions for the Intel chip */

#include "wavelan.h"    /* Others bits of the hardware */

/************************** DRIVER OPTIONS **************************/
/*
 * `#define' or `#undef' the following constant to change the behaviour
 * of the driver...
 */
#define WAVELAN_ROAMING        /* Include experimental roaming code */
#undef WAVELAN_ROAMING_EXT    /* Enable roaming wireless extensions */
#undef SET_PSA_CRC        /* Set the CRC in PSA (slower) */
#define USE_PSA_CONFIG        /* Use info from the PSA */
#undef STRUCT_CHECK        /* Verify padding of structures */
#undef EEPROM_IS_PROTECTED    /* Doesn't seem to be necessary */
#define MULTICAST_AVOID        /* Avoid extra multicast (I'm sceptical) */
#undef SET_MAC_ADDRESS        /* Experimental */

#ifdef WIRELESS_EXT    /* If wireless extension exist in the kernel */
/* Warning : these stuff will slow down the driver... */
#define WIRELESS_SPY        /* Enable spying addresses */
#undef HISTOGRAM        /* Enable histogram of sig level... */
#endif

/****************************** DEBUG ******************************/

#undef DEBUG_MODULE_TRACE    /* Module insertion/removal */
#undef DEBUG_CALLBACK_TRACE    /* Calls made by Linux */
#undef DEBUG_INTERRUPT_TRACE    /* Calls to handler */
#undef DEBUG_INTERRUPT_INFO    /* type of interrupt & so on */
#define DEBUG_INTERRUPT_ERROR    /* problems */
#undef DEBUG_CONFIG_TRACE    /* Trace the config functions */
#undef DEBUG_CONFIG_INFO    /* What's going on... */
#define DEBUG_CONFIG_ERRORS    /* Errors on configuration */
#undef DEBUG_TX_TRACE        /* Transmission calls */
#undef DEBUG_TX_INFO        /* Header of the transmitted packet */
#undef DEBUG_TX_FAIL        /* Normal failure conditions */
#define DEBUG_TX_ERROR        /* Unexpected conditions */
#undef DEBUG_RX_TRACE        /* Transmission calls */
#undef DEBUG_RX_INFO        /* Header of the transmitted packet */
#undef DEBUG_RX_FAIL        /* Normal failure conditions */
#define DEBUG_RX_ERROR        /* Unexpected conditions */
#undef DEBUG_PACKET_DUMP    /* Dump packet on the screen */
#undef DEBUG_IOCTL_TRACE    /* Misc call by Linux */
#undef DEBUG_IOCTL_INFO        /* Various debug info */
#define DEBUG_IOCTL_ERROR    /* What's going wrong */
#define DEBUG_BASIC_SHOW    /* Show basic startup info */
#undef DEBUG_VERSION_SHOW    /* Print version info */
#undef DEBUG_PSA_SHOW        /* Dump psa to screen */
#undef DEBUG_MMC_SHOW        /* Dump mmc to screen */
#undef DEBUG_SHOW_UNUSED    /* Show also unused fields */
#undef DEBUG_I82593_SHOW    /* Show i82593 status */
#undef DEBUG_DEVICE_SHOW    /* Show device parameters */

/************************ CONSTANTS & MACROS ************************/

#ifdef DEBUG_VERSION_SHOW
static const char *version = "wavelan_cs.c : v21 (wireless extensions) 18/10/99\n";
#endif

/* Watchdog temporisation */
#define    WATCHDOG_JIFFIES    (256*HZ/100)

/* Fix a bug in some old wireless extension definitions */
#ifndef IW_ESSID_MAX_SIZE
#define IW_ESSID_MAX_SIZE    32
#endif

/* ------------------------ PRIVATE IOCTL ------------------------ */

/* Wireless Extension Backward compatibility - Jean II
 * If the new wireless device private ioctl range is not defined,
 * default to standard device private ioctl range */
#ifndef SIOCIWFIRSTPRIV
#define SIOCIWFIRSTPRIV    SIOCDEVPRIVATE
#endif /* SIOCIWFIRSTPRIV */

#define SIOCSIPQTHR    SIOCIWFIRSTPRIV        /* Set quality threshold */
#define SIOCGIPQTHR    SIOCIWFIRSTPRIV + 1    /* Get quality threshold */
#define SIOCSIPROAM     SIOCIWFIRSTPRIV + 2    /* Set roaming state */
#define SIOCGIPROAM     SIOCIWFIRSTPRIV + 3    /* Get roaming state */

#define SIOCSIPHISTO    SIOCIWFIRSTPRIV + 6    /* Set histogram ranges */
#define SIOCGIPHISTO    SIOCIWFIRSTPRIV + 7    /* Get histogram values */

/*************************** WaveLAN Roaming  **************************/
#ifdef WAVELAN_ROAMING        /* Conditional compile, see above in options */

#define WAVELAN_ROAMING_DEBUG     0    /* 1 = Trace of handover decisions */
                    /* 2 = Info on each beacon rcvd... */
#define MAX_WAVEPOINTS        7    /* Max visible at one time */
#define WAVEPOINT_HISTORY    5    /* SNR sample history slow search */
#define WAVEPOINT_FAST_HISTORY    2    /* SNR sample history fast search */
#define SEARCH_THRESH_LOW    10    /* SNR to enter cell search */
#define SEARCH_THRESH_HIGH    13    /* SNR to leave cell search */
#define WAVELAN_ROAMING_DELTA    1    /* Hysteresis value (+/- SNR) */
#define CELL_TIMEOUT        2*HZ    /* in jiffies */

#define FAST_CELL_SEARCH    1    /* Boolean values... */
#define NWID_PROMISC        1    /* for code clarity. */

typedef struct wavepoint_beacon
{
  unsigned char        dsap,        /* Unused */
            ssap,        /* Unused */
            ctrl,        /* Unused */
            O,U,I,        /* Unused */
            spec_id1,    /* Unused */
            spec_id2,    /* Unused */
            pdu_type,    /* Unused */
            seq;        /* WavePoint beacon sequence number */
  unsigned short    domain_id,    /* WavePoint Domain ID */
            nwid;        /* WavePoint NWID */
} wavepoint_beacon;

typedef struct wavepoint_history
{
  unsigned short    nwid;        /* WavePoint's NWID */
  int            average_slow;    /* SNR running average */
  int            average_fast;    /* SNR running average */
  unsigned char      sigqual[WAVEPOINT_HISTORY]; /* Ringbuffer of recent SNR's */
  unsigned char        qualptr;    /* Index into ringbuffer */
  unsigned char        last_seq;    /* Last seq. no seen for WavePoint */
  struct wavepoint_history *next;    /* Next WavePoint in table */
  struct wavepoint_history *prev;    /* Previous WavePoint in table */
  unsigned long        last_seen;    /* Time of last beacon recvd, jiffies */
} wavepoint_history;

struct wavepoint_table
{
  wavepoint_history    *head;        /* Start of ringbuffer */
  int            num_wavepoints;    /* No. of WavePoints visible */
  unsigned char        locked;        /* Table lock */
};

#endif    /* WAVELAN_ROAMING */

/****************************** TYPES ******************************/

/* Shortcuts */
typedef struct net_device    device;
typedef struct net_device_stats    en_stats;
typedef struct iw_statistics    iw_stats;
typedef struct iw_quality    iw_qual;
typedef struct iw_freq        iw_freq;
typedef struct net_local    net_local;
typedef struct timer_list    timer_list;

/* Basic types */
typedef u_char        mac_addr[WAVELAN_ADDR_SIZE];    /* Hardware address */

/*
 * Static specific data for the interface.
 *
 * For each network interface, Linux keep data in two structure. "device"
 * keep the generic data (same format for everybody) and "net_local" keep
 * the additional specific data.
 * Note that some of this specific data is in fact generic (en_stats, for
 * example).
 */
struct net_local
{
  spinlock_t    lock;
  dev_node_t     node;        /* ???? What is this stuff ???? */
  device *    dev;        /* Reverse link... */
  dev_link_t *    link;        /* pcmcia structure */
  en_stats    stats;        /* Ethernet interface statistics */
  int        nresets;    /* Number of hw resets */
  u_char    configured;    /* If it is configured */
  u_char    reconfig_82593;    /* Need to reconfigure the controller */
  u_char    promiscuous;    /* Promiscuous mode */
  u_char    allmulticast;    /* All Multicast mode */
  int        mc_count;    /* Number of multicast addresses */
  timer_list    watchdog;    /* To avoid blocking state */

  u_char        status;        /* Current i82593 status */
  int       stop;        /* Current i82593 Stop Hit Register */
  int       rfp;        /* Last DMA machine receive pointer */
  int        overrunning;    /* Receiver overrun flag */

#ifdef WIRELESS_EXT
  iw_stats    wstats;        /* Wireless specific stats */
#endif

#ifdef WIRELESS_SPY
  int        spy_number;        /* Number of addresses to spy */
  mac_addr    spy_address[IW_MAX_SPY];    /* The addresses to spy */
  iw_qual    spy_stat[IW_MAX_SPY];        /* Statistics gathered */
#endif    /* WIRELESS_SPY */
#ifdef HISTOGRAM
  int        his_number;        /* Number of intervals */
  u_char    his_range[16];        /* Boundaries of interval ]n-1; n] */
  u_long    his_sum[16];        /* Sum in interval */
#endif    /* HISTOGRAM */
#ifdef WAVELAN_ROAMING
  u_long    domain_id;    /* Domain ID we lock on for roaming */
  int        filter_domains;    /* Check Domain ID of beacon found */
 struct wavepoint_table    wavepoint_table;    /* Table of visible WavePoints*/
  wavepoint_history *    curr_point;        /* Current wavepoint */
  int            cell_search;        /* Searching for new cell? */
  struct timer_list    cell_timer;        /* Garbage collection */
#endif    /* WAVELAN_ROAMING */
};

/**************************** PROTOTYPES ****************************/

#ifdef WAVELAN_ROAMING
/* ---------------------- ROAMING SUBROUTINES -----------------------*/

wavepoint_history *wl_roam_check(unsigned short nwid, net_local *lp);
wavepoint_history *wl_new_wavepoint(unsigned short nwid, unsigned char seq, net_local *lp);
void wl_del_wavepoint(wavepoint_history *wavepoint, net_local *lp);
void wl_cell_expiry(unsigned long data);
wavepoint_history *wl_best_sigqual(int fast_search, net_local *lp);
void wl_update_history(wavepoint_history *wavepoint, unsigned char sigqual, unsigned char seq);
void wv_roam_handover(wavepoint_history *wavepoint, net_local *lp);
void wv_nwid_filter(unsigned char mode, net_local *lp);
void wv_roam_init(struct net_device *dev);
void wv_roam_cleanup(struct net_device *dev);
#endif    /* WAVELAN_ROAMING */

/* ----------------------- MISC SUBROUTINES ------------------------ */
static void
    cs_error(client_handle_t, /* Report error to cardmgr */
         int,
         int);
/* ----------------- MODEM MANAGEMENT SUBROUTINES ----------------- */
static inline u_char        /* data */
    hasr_read(u_long);    /* Read the host interface : base address */
static inline void
    hacr_write(u_long,    /* Write to host interface : base address */
           u_char),    /* data */
    hacr_write_slow(u_long,
           u_char);
static void
    psa_read(device *,    /* Read the Parameter Storage Area */
         int,        /* offset in PSA */
         u_char *,    /* buffer to fill */
         int),        /* size to read */
    psa_write(device *,    /* Write to the PSA */
          int,        /* Offset in psa */
          u_char *,    /* Buffer in memory */
          int);        /* Length of buffer */
static inline void
    mmc_out(u_long,        /* Write 1 byte to the Modem Manag Control */
        u_short,
        u_char),
    mmc_write(u_long,    /* Write n bytes to the MMC */
          u_char,
          u_char *,
          int);
static inline u_char        /* Read 1 byte from the MMC */
    mmc_in(u_long,
           u_short);
static inline void
    mmc_read(u_long,    /* Read n bytes from the MMC */
         u_char,
         u_char *,
         int),
    fee_wait(u_long,    /* Wait for frequency EEprom : base address */
         int,        /* Base delay to wait for */
         int);        /* Number of time to wait */
static void
    fee_read(u_long,    /* Read the frequency EEprom : base address */
         u_short,    /* destination offset */
         u_short *,    /* data buffer */
         int);        /* number of registers */
/* ---------------------- I82593 SUBROUTINES ----------------------- */
static int
    wv_82593_cmd(device *,    /* synchronously send a command to i82593 */ 
             char *,
             int,
             int);
static inline int
    wv_diag(device *);    /* Diagnostique the i82593 */
static int
    read_ringbuf(device *,    /* Read a receive buffer */
             int,
             char *,
             int);
static inline void
    wv_82593_reconfig(device *);    /* Reconfigure the controller */
/* ------------------- DEBUG & INFO SUBROUTINES ------------------- */
static inline void
    wv_init_info(device *);    /* display startup info */
/* ------------------- IOCTL, STATS & RECONFIG ------------------- */
static en_stats    *
    wavelan_get_stats(device *);    /* Give stats /proc/net/dev */
/* ----------------------- PACKET RECEPTION ----------------------- */
static inline int
    wv_start_of_frame(device *,    /* Seek beggining of current frame */
              int,    /* end of frame */
              int);    /* start of buffer */
static inline void
    wv_packet_read(device *,    /* Read a packet from a frame */
               int,
               int),
    wv_packet_rcv(device *);    /* Read all packets waiting */
/* --------------------- PACKET TRANSMISSION --------------------- */
static inline void
    wv_packet_write(device *,    /* Write a packet to the Tx buffer */
            void *,
            short);
static int
    wavelan_packet_xmit(struct sk_buff *,    /* Send a packet */
                device *);
/* -------------------- HARDWARE CONFIGURATION -------------------- */
static inline int
    wv_mmc_init(device *);    /* Initialize the modem */
static int
    wv_ru_stop(device *),    /* Stop the i82593 receiver unit */
    wv_ru_start(device *);    /* Start the i82593 receiver unit */
static int
    wv_82593_config(device *);    /* Configure the i82593 */
static inline int
    wv_pcmcia_reset(device *);    /* Reset the pcmcia interface */
static int
    wv_hw_config(device *);    /* Reset & configure the whole hardware */
static inline void
    wv_hw_reset(device *);    /* Same, + start receiver unit */
static inline int
    wv_pcmcia_config(dev_link_t *);    /* Configure the pcmcia interface */
static void
    wv_pcmcia_release(u_long),    /* Remove a device */
    wv_flush_stale_links(void);    /* "detach" all possible devices */
/* ---------------------- INTERRUPT HANDLING ---------------------- */
static void
wavelan_interrupt(int,    /* Interrupt handler */
          void *,
          struct pt_regs *);
static void
    wavelan_watchdog(u_long);    /* Transmission watchdog */
/* ------------------- CONFIGURATION CALLBACKS ------------------- */
static int
    wavelan_open(device *),        /* Open the device */
    wavelan_close(device *),    /* Close the device */
    wavelan_init(device *);        /* Do nothing */
static dev_link_t *
    wavelan_attach(void);        /* Create a new device */
static void
    wavelan_detach(dev_link_t *);    /* Destroy a removed device */
static int
    wavelan_event(event_t,        /* Manage pcmcia events */
              int,
              event_callback_args_t *);

/**************************** VARIABLES ****************************/

static dev_info_t dev_info = "wavelan_cs";
static dev_link_t *dev_list;        /* Linked list of devices */

/* WARNING : the following variable MUST be volatile
 * It is used by wv_82593_cmd to syncronise with wavelan_interrupt */ 
static volatile int    wv_wait_completed;

/*
 * Parameters that can be set with 'insmod'
 * The exact syntax is 'insmod wavelan_cs.o <var>=<value>'
 */

/* Bit map of interrupts to choose from */
/* This means pick from 15, 14, 12, 11, 10, 9, 7, 5, 4 and 3 */
static int    irq_mask = 0xdeb8;
static int     irq_list[4] = { -1 };

/* Shared memory speed, in ns */
static int    mem_speed;

/* New module interface */
MODULE_PARM(irq_mask, "i");
MODULE_PARM(irq_list, "1-4i");
MODULE_PARM(mem_speed, "i");

#ifdef WAVELAN_ROAMING        /* Conditional compile, see above in options */
/* Enable roaming mode ? No ! Please keep this to 0 */
static int    do_roaming;
MODULE_PARM(do_roaming, "i");
#endif    /* WAVELAN_ROAMING */

#endif    /* WAVELAN_CS_H */


:: Command execute ::

Enter:
 
Select:
 

:: Search ::
  - regexp 

:: Upload ::
 
[ Read-Only ]

:: Make Dir ::
 
[ Read-Only ]
:: Make File ::
 
[ Read-Only ]

:: Go Dir ::
 
:: Go File ::
 

--[ c99shell v. 1.0 pre-release build #13 powered by Captain Crunch Security Team | http://ccteam.ru | Generation time: 0.0335 ]--