Viewing file:  timer.c (4.61 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* $Id: timer.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
*
* Copyright (C) 1996 SpellCaster Telecommunications Inc.
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
* For more information, please contact gpl-info@spellcast.com or write:
*
* SpellCaster Telecommunications Inc.
* 5621 Finch Avenue East, Unit #3
* Scarborough, Ontario Canada
* M1B 2T9
* +1 (416) 297-8565
* +1 (416) 297-6433 Facsimile
*/
#define __NO_VERSION__
#include "includes.h"
#include "hardware.h"
#include "message.h"
#include "card.h"
extern board *adapter[];
extern void flushreadfifo(int);
extern int startproc(int);
extern int indicate_status(int, int, unsigned long, char *);
extern int sendmessage(int, unsigned int, unsigned int, unsigned int,
unsigned int, unsigned int, unsigned int, unsigned int *);
/*
* Write the proper values into the I/O ports following a reset
*/
void setup_ports(int card)
{
outb((adapter[card]->rambase >> 12), adapter[card]->ioport[EXP_BASE]);
/* And the IRQ */
outb((adapter[card]->interrupt | 0x80),
adapter[card]->ioport[IRQ_SELECT]);
}
/*
* Timed function to check the status of a previous reset
* Must be very fast as this function runs in the context of
* an interrupt handler.
*
* Setup the ioports for the board that were cleared by the reset.
* Then, check to see if the signate has been set. Next, set the
* signature to a known value and issue a startproc if needed.
*/
void check_reset(unsigned long data)
{
unsigned long flags;
unsigned long sig;
int card = (unsigned int) data;
pr_debug("%s: check_timer timer called\n", adapter[card]->devicename);
/* Setup the io ports */
setup_ports(card);
save_flags(flags);
cli();
outb(adapter[card]->ioport[adapter[card]->shmem_pgport],
(adapter[card]->shmem_magic>>14) | 0x80);
sig = (unsigned long) *((unsigned long *)(adapter[card]->rambase + SIG_OFFSET));
/* check the signature */
if(sig == SIGNATURE) {
flushreadfifo(card);
restore_flags(flags);
/* See if we need to do a startproc */
if (adapter[card]->StartOnReset)
startproc(card);
}
else {
pr_debug("%s: No signature yet, waiting another %d jiffies.\n",
adapter[card]->devicename, CHECKRESET_TIME);
mod_timer(&adapter[card]->reset_timer, jiffies+CHECKRESET_TIME);
}
restore_flags(flags);
}
/*
* Timed function to check the status of a previous reset
* Must be very fast as this function runs in the context of
* an interrupt handler.
*
* Send check adapter->phystat to see if the channels are up
* If they are, tell ISDN4Linux that the board is up. If not,
* tell IADN4Linux that it is up. Always reset the timer to
* fire again (endless loop).
*/
void check_phystat(unsigned long data)
{
unsigned long flags;
int card = (unsigned int) data;
pr_debug("%s: Checking status...\n", adapter[card]->devicename);
/*
* check the results of the last PhyStat and change only if
* has changed drastically
*/
if (adapter[card]->nphystat && !adapter[card]->phystat) { /* All is well */
pr_debug("PhyStat transition to RUN\n");
pr_info("%s: Switch contacted, transmitter enabled\n",
adapter[card]->devicename);
indicate_status(card, ISDN_STAT_RUN, 0, NULL);
}
else if (!adapter[card]->nphystat && adapter[card]->phystat) { /* All is not well */
pr_debug("PhyStat transition to STOP\n");
pr_info("%s: Switch connection lost, transmitter disabled\n",
adapter[card]->devicename);
indicate_status(card, ISDN_STAT_STOP, 0, NULL);
}
adapter[card]->phystat = adapter[card]->nphystat;
/* Reinitialize the timer */
save_flags(flags);
cli();
mod_timer(&adapter[card]->stat_timer, jiffies+CHECKSTAT_TIME);
restore_flags(flags);
/* Send a new cePhyStatus message */
sendmessage(card, CEPID,ceReqTypePhy,ceReqClass2,
ceReqPhyStatus,0,0,NULL);
}
/*
* When in trace mode, this callback is used to swap the working shared
* RAM page to the trace page(s) and process all received messages. It
* must be called often enough to get all of the messages out of RAM before
* it loops around.
* Trace messages are \n terminated strings.
* We output the messages in 64 byte chunks through readstat. Each chunk
* is scanned for a \n followed by a time stamp. If the timerstamp is older
* than the current time, scanning stops and the page and offset are recorded
* as the starting point the next time the trace timer is called. The final
* step is to restore the working page and reset the timer.
*/
void trace_timer(unsigned long data)
{
unsigned long flags;
/*
* Disable interrupts and swap the first page
*/
save_flags(flags);
cli();
}
|