Viewing file:  command.c (12.85 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* $Id: command.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
*
* Copyright (C) 1996 SpellCaster Telecommunications Inc.
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
* For more information, please contact gpl-info@spellcast.com or write:
*
* SpellCaster Telecommunications Inc.
* 5621 Finch Avenue East, Unit #3
* Scarborough, Ontario Canada
* M1B 2T9
* +1 (416) 297-8565
* +1 (416) 297-6433 Facsimile
*/
#define __NO_VERSION__
#include <linux/module.h>
#include "includes.h" /* This must be first */
#include "hardware.h"
#include "message.h"
#include "card.h"
#include "scioc.h"
int dial(int card, unsigned long channel, setup_parm setup);
int hangup(int card, unsigned long channel);
int answer(int card, unsigned long channel);
int clreaz(int card, unsigned long channel);
int seteaz(int card, unsigned long channel, char *);
int geteaz(int card, unsigned long channel, char *);
int setsil(int card, unsigned long channel, char *);
int getsil(int card, unsigned long channel, char *);
int setl2(int card, unsigned long arg);
int getl2(int card, unsigned long arg);
int setl3(int card, unsigned long arg);
int getl3(int card, unsigned long arg);
int lock(void);
int unlock(void);
int acceptb(int card, unsigned long channel);
extern int cinst;
extern board *adapter[];
extern int sc_ioctl(int, scs_ioctl *);
extern int setup_buffers(int, int, unsigned int);
extern int indicate_status(int, int,ulong,char*);
extern void check_reset(unsigned long);
extern int send_and_receive(int, unsigned int, unsigned char, unsigned char,
unsigned char, unsigned char, unsigned char, unsigned char *,
RspMessage *, int);
extern int sendmessage(int, unsigned int, unsigned int, unsigned int,
unsigned int, unsigned int, unsigned int, unsigned int *);
extern inline void pullphone(char *, char *);
#ifdef DEBUG
/*
* Translate command codes to strings
*/
static char *commands[] = { "ISDN_CMD_IOCTL",
"ISDN_CMD_DIAL",
"ISDN_CMD_ACCEPTB",
"ISDN_CMD_ACCEPTB",
"ISDN_CMD_HANGUP",
"ISDN_CMD_CLREAZ",
"ISDN_CMD_SETEAZ",
"ISDN_CMD_GETEAZ",
"ISDN_CMD_SETSIL",
"ISDN_CMD_GETSIL",
"ISDN_CMD_SETL2",
"ISDN_CMD_GETL2",
"ISDN_CMD_SETL3",
"ISDN_CMD_GETL3",
"ISDN_CMD_LOCK",
"ISDN_CMD_UNLOCK",
"ISDN_CMD_SUSPEND",
"ISDN_CMD_RESUME" };
/*
* Translates ISDN4Linux protocol codes to strings for debug messages
*/
static char *l3protos[] = { "ISDN_PROTO_L3_TRANS" };
static char *l2protos[] = { "ISDN_PROTO_L2_X75I",
"ISDN_PROTO_L2_X75UI",
"ISDN_PROTO_L2_X75BUI",
"ISDN_PROTO_L2_HDLC",
"ISDN_PROTO_L2_TRANS" };
#endif
int get_card_from_id(int driver)
{
int i;
for(i = 0 ; i < cinst ; i++) {
if(adapter[i]->driverId == driver)
return i;
}
return -NODEV;
}
/*
* command
*/
int command(isdn_ctrl *cmd)
{
int card;
card = get_card_from_id(cmd->driver);
if(!IS_VALID_CARD(card)) {
pr_debug("Invalid param: %d is not a valid card id\n", card);
return -ENODEV;
}
pr_debug("%s: Received %s command from Link Layer\n",
adapter[card]->devicename, commands[cmd->command]);
/*
* Dispatch the command
*/
switch(cmd->command) {
case ISDN_CMD_IOCTL:
{
unsigned long cmdptr;
scs_ioctl ioc;
int err;
memcpy(&cmdptr, cmd->parm.num, sizeof(unsigned long));
if((err = copy_from_user(&ioc, (scs_ioctl *) cmdptr,
sizeof(scs_ioctl)))) {
pr_debug("%s: Failed to verify user space 0x%x\n",
adapter[card]->devicename, cmdptr);
return err;
}
return sc_ioctl(card, &ioc);
}
case ISDN_CMD_DIAL:
return dial(card, cmd->arg, cmd->parm.setup);
case ISDN_CMD_HANGUP:
return hangup(card, cmd->arg);
case ISDN_CMD_ACCEPTD:
return answer(card, cmd->arg);
case ISDN_CMD_ACCEPTB:
return acceptb(card, cmd->arg);
case ISDN_CMD_CLREAZ:
return clreaz(card, cmd->arg);
case ISDN_CMD_SETEAZ:
return seteaz(card, cmd->arg, cmd->parm.num);
case ISDN_CMD_GETEAZ:
return geteaz(card, cmd->arg, cmd->parm.num);
case ISDN_CMD_SETSIL:
return setsil(card, cmd->arg, cmd->parm.num);
case ISDN_CMD_GETSIL:
return getsil(card, cmd->arg, cmd->parm.num);
case ISDN_CMD_SETL2:
return setl2(card, cmd->arg);
case ISDN_CMD_GETL2:
return getl2(card, cmd->arg);
case ISDN_CMD_SETL3:
return setl3(card, cmd->arg);
case ISDN_CMD_GETL3:
return getl3(card, cmd->arg);
case ISDN_CMD_LOCK:
return lock();
case ISDN_CMD_UNLOCK:
return unlock();
default:
return -EINVAL;
}
return 0;
}
/*
* Confirm our ability to communicate with the board. This test assumes no
* other message activity is present
*/
int loopback(int card)
{
int status;
static char testmsg[] = "Test Message";
RspMessage rspmsg;
if(!IS_VALID_CARD(card)) {
pr_debug("Invalid param: %d is not a valid card id\n", card);
return -ENODEV;
}
pr_debug("%s: Sending loopback message\n", adapter[card]->devicename);
/*
* Send the loopback message to confirm that memory transfer is
* operational
*/
status = send_and_receive(card, CMPID, cmReqType1,
cmReqClass0,
cmReqMsgLpbk,
0,
(unsigned char) strlen(testmsg),
(unsigned char *)testmsg,
&rspmsg, SAR_TIMEOUT);
if (!status) {
pr_debug("%s: Loopback message successfully sent\n",
adapter[card]->devicename);
if(strcmp(rspmsg.msg_data.byte_array, testmsg)) {
pr_debug("%s: Loopback return != sent\n",
adapter[card]->devicename);
return -EIO;
}
return 0;
}
else {
pr_debug("%s: Send loopback message failed\n",
adapter[card]->devicename);
return -EIO;
}
}
/*
* start the onboard firmware
*/
int startproc(int card)
{
int status;
if(!IS_VALID_CARD(card)) {
pr_debug("Invalid param: %d is not a valid card id\n", card);
return -ENODEV;
}
/*
* send start msg
*/
status = sendmessage(card, CMPID,cmReqType2,
cmReqClass0,
cmReqStartProc,
0,0,0);
pr_debug("%s: Sent startProc\n", adapter[card]->devicename);
return status;
}
int loadproc(int card, char *data)
{
return -1;
}
/*
* Dials the number passed in
*/
int dial(int card, unsigned long channel, setup_parm setup)
{
int status;
char Phone[48];
if(!IS_VALID_CARD(card)) {
pr_debug("Invalid param: %d is not a valid card id\n", card);
return -ENODEV;
}
/*extract ISDN number to dial from eaz/msn string*/
strcpy(Phone,setup.phone);
/*send the connection message*/
status = sendmessage(card, CEPID,ceReqTypePhy,
ceReqClass1,
ceReqPhyConnect,
(unsigned char) channel+1,
strlen(Phone),
(unsigned int *) Phone);
pr_debug("%s: Dialing %s on channel %d\n",
adapter[card]->devicename, Phone, channel+1);
return status;
}
/*
* Answer an incoming call
*/
int answer(int card, unsigned long channel)
{
if(!IS_VALID_CARD(card)) {
pr_debug("Invalid param: %d is not a valid card id\n", card);
return -ENODEV;
}
if(setup_buffers(card, channel+1, BUFFER_SIZE)) {
hangup(card, channel+1);
return -ENOBUFS;
}
indicate_status(card, ISDN_STAT_BCONN,channel,NULL);
pr_debug("%s: Answered incoming call on channel %s\n",
adapter[card]->devicename, channel+1);
return 0;
}
/*
* Hangup up the call on specified channel
*/
int hangup(int card, unsigned long channel)
{
int status;
if(!IS_VALID_CARD(card)) {
pr_debug("Invalid param: %d is not a valid card id\n", card);
return -ENODEV;
}
status = sendmessage(card, CEPID, ceReqTypePhy,
ceReqClass1,
ceReqPhyDisconnect,
(unsigned char) channel+1,
0,
NULL);
pr_debug("%s: Sent HANGUP message to channel %d\n",
adapter[card]->devicename, channel+1);
return status;
}
/*
* Set the layer 2 protocol (X.25, HDLC, Raw)
*/
int setl2(int card, unsigned long arg)
{
int status =0;
int protocol,channel;
if(!IS_VALID_CARD(card)) {
pr_debug("Invalid param: %d is not a valid card id\n", card);
return -ENODEV;
}
protocol = arg >> 8;
channel = arg & 0xff;
adapter[card]->channel[channel].l2_proto = protocol;
pr_debug("%s: Level 2 protocol for channel %d set to %s from %d\n",
adapter[card]->devicename, channel+1,l2protos[adapter[card]->channel[channel].l2_proto],protocol);
/*
* check that the adapter is also set to the correct protocol
*/
pr_debug("%s: Sending GetFrameFormat for channel %d\n",
adapter[card]->devicename, channel+1);
status = sendmessage(card, CEPID, ceReqTypeCall,
ceReqClass0,
ceReqCallGetFrameFormat,
(unsigned char)channel+1,
1,
(unsigned int *) protocol);
if(status)
return status;
return 0;
}
/*
* Get the layer 2 protocol
*/
int getl2(int card, unsigned long channel) {
if(!IS_VALID_CARD(card)) {
pr_debug("Invalid param: %d is not a valid card id\n", card);
return -ENODEV;
}
pr_debug("%s: Level 2 protocol for channel %d reported as %s\n",
adapter[card]->devicename, channel+1,
l2protos[adapter[card]->channel[channel].l2_proto]);
return adapter[card]->channel[channel].l2_proto;
}
/*
* Set the layer 3 protocol
*/
int setl3(int card, unsigned long channel)
{
int protocol = channel >> 8;
if(!IS_VALID_CARD(card)) {
pr_debug("Invalid param: %d is not a valid card id\n", card);
return -ENODEV;
}
adapter[card]->channel[channel].l3_proto = protocol;
pr_debug("%s: Level 3 protocol for channel %d set to %s\n",
adapter[card]->devicename, channel+1, l3protos[protocol]);
return 0;
}
/*
* Get the layer 3 protocol
*/
int getl3(int card, unsigned long arg)
{
if(!IS_VALID_CARD(card)) {
pr_debug("Invalid param: %d is not a valid card id\n", card);
return -ENODEV;
}
pr_debug("%s: Level 3 protocol for channel %d reported as %s\n",
adapter[card]->devicename, arg+1,
l3protos[adapter[card]->channel[arg].l3_proto]);
return adapter[card]->channel[arg].l3_proto;
}
int acceptb(int card, unsigned long channel)
{
if(!IS_VALID_CARD(card)) {
pr_debug("Invalid param: %d is not a valid card id\n", card);
return -ENODEV;
}
if(setup_buffers(card, channel+1, BUFFER_SIZE))
{
hangup(card, channel+1);
return -ENOBUFS;
}
pr_debug("%s: B-Channel connection accepted on channel %d\n",
adapter[card]->devicename, channel+1);
indicate_status(card, ISDN_STAT_BCONN, channel, NULL);
return 0;
}
int clreaz(int card, unsigned long arg)
{
if(!IS_VALID_CARD(card)) {
pr_debug("Invalid param: %d is not a valid card id\n", card);
return -ENODEV;
}
strcpy(adapter[card]->channel[arg].eazlist, "");
adapter[card]->channel[arg].eazclear = 1;
pr_debug("%s: EAZ List cleared for channel %d\n",
adapter[card]->devicename, arg+1);
return 0;
}
int seteaz(int card, unsigned long arg, char *num)
{
if(!IS_VALID_CARD(card)) {
pr_debug("Invalid param: %d is not a valid card id\n", card);
return -ENODEV;
}
strcpy(adapter[card]->channel[arg].eazlist, num);
adapter[card]->channel[arg].eazclear = 0;
pr_debug("%s: EAZ list for channel %d set to: %s\n",
adapter[card]->devicename, arg+1,
adapter[card]->channel[arg].eazlist);
return 0;
}
int geteaz(int card, unsigned long arg, char *num)
{
if(!IS_VALID_CARD(card)) {
pr_debug("Invalid param: %d is not a valid card id\n", card);
return -ENODEV;
}
strcpy(num, adapter[card]->channel[arg].eazlist);
pr_debug("%s: EAZ List for channel %d reported: %s\n",
adapter[card]->devicename, arg+1,
adapter[card]->channel[arg].eazlist);
return 0;
}
int setsil(int card, unsigned long arg, char *num)
{
if(!IS_VALID_CARD(card)) {
pr_debug("Invalid param: %d is not a valid card id\n", card);
return -ENODEV;
}
strcpy(adapter[card]->channel[arg].sillist, num);
pr_debug("%s: Service Indicators for channel %d set: %s\n",
adapter[card]->devicename, arg+1,
adapter[card]->channel[arg].sillist);
return 0;
}
int getsil(int card, unsigned long arg, char *num)
{
if(!IS_VALID_CARD(card)) {
pr_debug("Invalid param: %d is not a valid card id\n", card);
return -ENODEV;
}
strcpy(num, adapter[card]->channel[arg].sillist);
pr_debug("%s: SIL for channel %d reported: %s\n",
adapter[card]->devicename, arg+1,
adapter[card]->channel[arg].sillist);
return 0;
}
int lock()
{
MOD_INC_USE_COUNT;
return 0;
}
int unlock()
{
MOD_DEC_USE_COUNT;
return 0;
}
int reset(int card)
{
unsigned long flags;
if(!IS_VALID_CARD(card)) {
pr_debug("Invalid param: %d is not a valid card id\n", card);
return -ENODEV;
}
indicate_status(card, ISDN_STAT_STOP, 0, NULL);
if(adapter[card]->EngineUp) {
del_timer(&adapter[card]->stat_timer);
}
adapter[card]->EngineUp = 0;
save_flags(flags);
cli();
init_timer(&adapter[card]->reset_timer);
adapter[card]->reset_timer.function = check_reset;
adapter[card]->reset_timer.data = card;
adapter[card]->reset_timer.expires = jiffies + CHECKRESET_TIME;
add_timer(&adapter[card]->reset_timer);
restore_flags(flags);
outb(0x1,adapter[card]->ioport[SFT_RESET]);
pr_debug("%s: Adapter Reset\n", adapter[card]->devicename);
return 0;
}
void flushreadfifo (int card)
{
while(inb(adapter[card]->ioport[FIFO_STATUS]) & RF_HAS_DATA)
inb(adapter[card]->ioport[FIFO_READ]);
}
|