Viewing file:  hysdn_init.c (8.39 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* $Id: hysdn_init.c,v 1.1.4.1 2001/11/20 14:19:37 kai Exp $
*
* Linux driver for HYSDN cards, init functions.
*
* Author Werner Cornelius (werner@titro.de) for Hypercope GmbH
* Copyright 1999 by Werner Cornelius (werner@titro.de)
*
* This software may be used and distributed according to the terms
* of the GNU General Public License, incorporated herein by reference.
*
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/version.h>
#include <linux/poll.h>
#include <linux/vmalloc.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include "hysdn_defs.h"
static struct pci_device_id hysdn_pci_tbl[] __initdata = {
{PCI_VENDOR_ID_HYPERCOPE, PCI_DEVICE_ID_HYPERCOPE_PLX, PCI_ANY_ID, PCI_SUBDEVICE_ID_HYPERCOPE_METRO},
{PCI_VENDOR_ID_HYPERCOPE, PCI_DEVICE_ID_HYPERCOPE_PLX, PCI_ANY_ID, PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2},
{PCI_VENDOR_ID_HYPERCOPE, PCI_DEVICE_ID_HYPERCOPE_PLX, PCI_ANY_ID, PCI_SUBDEVICE_ID_HYPERCOPE_ERGO},
{PCI_VENDOR_ID_HYPERCOPE, PCI_DEVICE_ID_HYPERCOPE_PLX, PCI_ANY_ID, PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO},
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(pci, hysdn_pci_tbl);
MODULE_DESCRIPTION("ISDN4Linux: Driver for HYSDN cards");
MODULE_AUTHOR("Werner Cornelius");
MODULE_LICENSE("GPL");
static char *hysdn_init_revision = "$Revision: 1.1.4.1 $";
int cardmax; /* number of found cards */
hysdn_card *card_root = NULL; /* pointer to first card */
/**********************************************/
/* table assigning PCI-sub ids to board types */
/* the last entry contains all 0 */
/**********************************************/
static struct {
word subid; /* PCI sub id */
uchar cardtyp; /* card type assigned */
} pci_subid_map[] = {
{
PCI_SUBDEVICE_ID_HYPERCOPE_METRO, BD_METRO
},
{
PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2, BD_CHAMP2
},
{
PCI_SUBDEVICE_ID_HYPERCOPE_ERGO, BD_ERGO
},
{
PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO, BD_ERGO
},
{
0, 0
} /* terminating entry */
};
/*********************************************************************/
/* search_cards searches for available cards in the pci config data. */
/* If a card is found, the card structure is allocated and the cards */
/* ressources are reserved. cardmax is incremented. */
/*********************************************************************/
static void
search_cards(void)
{
struct pci_dev *akt_pcidev = NULL;
hysdn_card *card, *card_last;
int i;
card_root = NULL;
card_last = NULL;
while ((akt_pcidev = pci_find_device(PCI_VENDOR_ID_HYPERCOPE, PCI_DEVICE_ID_HYPERCOPE_PLX,
akt_pcidev)) != NULL) {
if (pci_enable_device(akt_pcidev))
continue;
if (!(card = kmalloc(sizeof(hysdn_card), GFP_KERNEL))) {
printk(KERN_ERR "HYSDN: unable to alloc device mem \n");
return;
}
memset(card, 0, sizeof(hysdn_card));
card->myid = cardmax; /* set own id */
card->bus = akt_pcidev->bus->number;
card->devfn = akt_pcidev->devfn; /* slot + function */
card->subsysid = akt_pcidev->subsystem_device;
card->irq = akt_pcidev->irq;
card->iobase = pci_resource_start(akt_pcidev, PCI_REG_PLX_IO_BASE);
card->plxbase = pci_resource_start(akt_pcidev, PCI_REG_PLX_MEM_BASE);
card->membase = pci_resource_start(akt_pcidev, PCI_REG_MEMORY_BASE);
card->brdtype = BD_NONE; /* unknown */
card->debug_flags = DEF_DEB_FLAGS; /* set default debug */
card->faxchans = 0; /* default no fax channels */
card->bchans = 2; /* and 2 b-channels */
for (i = 0; pci_subid_map[i].subid; i++)
if (pci_subid_map[i].subid == card->subsysid) {
card->brdtype = pci_subid_map[i].cardtyp;
break;
}
if (card->brdtype != BD_NONE) {
if (ergo_inithardware(card)) {
printk(KERN_WARNING "HYSDN: card at io 0x%04x already in use\n", card->iobase);
kfree(card);
continue;
}
} else {
printk(KERN_WARNING "HYSDN: unknown card id 0x%04x\n", card->subsysid);
kfree(card); /* release mem */
continue;
}
cardmax++;
card->next = NULL; /*end of chain */
if (card_last)
card_last->next = card; /* pointer to next card */
else
card_root = card;
card_last = card; /* new chain end */
} /* device found */
} /* search_cards */
/************************************************************************************/
/* free_resources frees the acquired PCI resources and returns the allocated memory */
/************************************************************************************/
static void
free_resources(void)
{
hysdn_card *card;
while (card_root) {
card = card_root;
if (card->releasehardware)
card->releasehardware(card); /* free all hardware resources */
card_root = card_root->next; /* remove card from chain */
kfree(card); /* return mem */
} /* while card_root */
} /* free_resources */
/**************************************************************************/
/* stop_cards disables (hardware resets) all cards and disables interrupt */
/**************************************************************************/
static void
stop_cards(void)
{
hysdn_card *card;
card = card_root; /* first in chain */
while (card) {
if (card->stopcard)
card->stopcard(card);
card = card->next; /* remove card from chain */
} /* while card */
} /* stop_cards */
/****************************************************************************/
/* The module startup and shutdown code. Only compiled when used as module. */
/* Using the driver as module is always advisable, because the booting */
/* image becomes smaller and the driver code is only loaded when needed. */
/* Additionally newer versions may be activated without rebooting. */
/****************************************************************************/
/******************************************************/
/* extract revision number from string for log output */
/******************************************************/
char *
hysdn_getrev(const char *revision)
{
char *rev;
char *p;
if ((p = strchr(revision, ':'))) {
rev = p + 2;
p = strchr(rev, '$');
*--p = 0;
} else
rev = "???";
return rev;
}
/****************************************************************************/
/* init_module is called once when the module is loaded to do all necessary */
/* things like autodetect... */
/* If the return value of this function is 0 the init has been successful */
/* and the module is added to the list in /proc/modules, otherwise an error */
/* is assumed and the module will not be kept in memory. */
/****************************************************************************/
static int __init
hysdn_init(void)
{
char tmp[50];
strcpy(tmp, hysdn_init_revision);
printk(KERN_NOTICE "HYSDN: module Rev: %s loaded\n", hysdn_getrev(tmp));
strcpy(tmp, hysdn_net_revision);
printk(KERN_NOTICE "HYSDN: network interface Rev: %s \n", hysdn_getrev(tmp));
if (!pci_present()) {
printk(KERN_ERR "HYSDN: no PCI bus present, module not loaded\n");
return (-1);
}
search_cards();
printk(KERN_INFO "HYSDN: %d card(s) found.\n", cardmax);
if (hysdn_procconf_init()) {
free_resources(); /* proc file_sys not created */
return (-1);
}
#ifdef CONFIG_HYSDN_CAPI
if(cardmax > 0) {
if(hycapi_init()) {
printk(KERN_ERR "HYCAPI: init failed\n");
return(-1);
}
}
#endif /* CONFIG_HYSDN_CAPI */
return (0); /* no error */
} /* init_module */
/***********************************************************************/
/* cleanup_module is called when the module is released by the kernel. */
/* The routine is only called if init_module has been successful and */
/* the module counter has a value of 0. Otherwise this function will */
/* not be called. This function must release all resources still allo- */
/* cated as after the return from this function the module code will */
/* be removed from memory. */
/***********************************************************************/
static void __exit
hysdn_exit(void)
{
#ifdef CONFIG_HYSDN_CAPI
hysdn_card *card;
#endif /* CONFIG_HYSDN_CAPI */
stop_cards();
#ifdef CONFIG_HYSDN_CAPI
card = card_root; /* first in chain */
while (card) {
hycapi_capi_release(card);
card = card->next; /* remove card from chain */
} /* while card */
hycapi_cleanup();
#endif /* CONFIG_HYSDN_CAPI */
hysdn_procconf_release();
free_resources();
printk(KERN_NOTICE "HYSDN: module unloaded\n");
} /* cleanup_module */
module_init(hysdn_init);
module_exit(hysdn_exit);
|