Viewing file:  serverworks.c (19.21 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* linux/drivers/ide/serverworks.c Version 0.2 17 Oct 2000
*
* Copyright (C) 2000 Cobalt Networks, Inc. <asun@cobalt.com>
* May be copied or modified under the terms of the GNU General Public License
*
* interface borrowed from alim15x3.c:
* Copyright (C) 1998-2000 Michel Aubry, Maintainer
* Copyright (C) 1998-2000 Andrzej Krzysztofowicz, Maintainer
*
* Copyright (C) 1998-2000 Andre Hedrick <andre@linux-ide.org>
*
* IDE support for the ServerWorks OSB4 IDE chipset
*
* here's the default lspci:
*
* 00:0f.1 IDE interface: ServerWorks: Unknown device 0211 (prog-if 8a [Master SecP PriP])
* Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR+ FastB2B-
* Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
* Latency: 255
* Region 4: I/O ports at c200
* 00: 66 11 11 02 05 01 00 02 00 8a 01 01 00 ff 80 00
* 10: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* 20: 01 c2 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* 40: 99 99 99 99 ff ff ff ff 0c 0c 00 00 00 00 00 00
* 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
* 00:0f.1 IDE interface: ServerWorks: Unknown device 0212 (rev 92) (prog-if 8a [Master SecP PriP])
* Subsystem: ServerWorks: Unknown device 0212
* Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B-
* Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR-
* Latency: 64, cache line size 08
* Region 0: I/O ports at 01f0
* Region 1: I/O ports at 03f4
* Region 2: I/O ports at 0170
* Region 3: I/O ports at 0374
* Region 4: I/O ports at 08b0
* Region 5: I/O ports at 1000
*
* 00:0f.1 IDE interface: ServerWorks: Unknown device 0212 (rev 92)
* 00: 66 11 12 02 05 00 00 02 92 8a 01 01 08 40 80 00
* 10: f1 01 00 00 f5 03 00 00 71 01 00 00 75 03 00 00
* 20: b1 08 00 00 01 10 00 00 00 00 00 00 66 11 12 02
* 30: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* 40: 4f 4f 4f 4f 20 ff ff ff f0 50 44 44 00 00 00 00
* 50: 00 00 00 00 07 00 44 02 0f 04 03 00 00 00 00 00
* 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* 80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
* f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
*
*
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/ioport.h>
#include <linux/pci.h>
#include <linux/hdreg.h>
#include <linux/ide.h>
#include <linux/init.h>
#include <linux/delay.h>
#include <asm/io.h>
#include "ide_modes.h"
#define SVWKS_DEBUG_DRIVE_INFO 0
#define DISPLAY_SVWKS_TIMINGS
#if defined(DISPLAY_SVWKS_TIMINGS) && defined(CONFIG_PROC_FS)
#include <linux/stat.h>
#include <linux/proc_fs.h>
static struct pci_dev *bmide_dev;
static int svwks_get_info(char *, char **, off_t, int);
extern int (*svwks_display_info)(char *, char **, off_t, int); /* ide-proc.c */
extern char *ide_media_verbose(ide_drive_t *);
static int svwks_get_info (char *buffer, char **addr, off_t offset, int count)
{
char *p = buffer;
u32 bibma = pci_resource_start(bmide_dev, 4);
u32 reg40, reg44;
u16 reg48, reg56;
u8 c0 = 0, c1 = 0, reg54;
pci_read_config_dword(bmide_dev, 0x40, ®40);
pci_read_config_dword(bmide_dev, 0x44, ®44);
pci_read_config_word(bmide_dev, 0x48, ®48);
pci_read_config_byte(bmide_dev, 0x54, ®54);
pci_read_config_word(bmide_dev, 0x56, ®56);
/*
* at that point bibma+0x2 et bibma+0xa are byte registers
* to investigate:
*/
c0 = inb_p((unsigned short)bibma + 0x02);
c1 = inb_p((unsigned short)bibma + 0x0a);
switch(bmide_dev->device) {
case PCI_DEVICE_ID_SERVERWORKS_CSB5IDE:
p += sprintf(p, "\n ServerWorks CSB5 Chipset.\n");
break;
case PCI_DEVICE_ID_SERVERWORKS_OSB4:
p += sprintf(p, "\n ServerWorks OSB4 Chipset.\n");
break;
default:
p += sprintf(p, "\n ServerWorks 0x%04x Chipset.\n", bmide_dev->device);
break;
}
p += sprintf(p, "------------------------------- General Status ---------------------------------\n");
#if 0
p += sprintf(p, " : %s\n", "str");
#endif
p += sprintf(p, "--------------- Primary Channel ---------------- Secondary Channel -------------\n");
p += sprintf(p, " %sabled %sabled\n",
(c0&0x80) ? "dis" : " en",
(c1&0x80) ? "dis" : " en");
p += sprintf(p, "--------------- drive0 --------- drive1 -------- drive0 ---------- drive1 ------\n");
p += sprintf(p, "DMA enabled: %s %s %s %s\n",
(c0&0x20) ? "yes" : "no ",
(c0&0x40) ? "yes" : "no ",
(c1&0x20) ? "yes" : "no ",
(c1&0x40) ? "yes" : "no " );
p += sprintf(p, "UDMA enabled: %s %s %s %s\n",
(reg54 & 0x01) ? "yes" : "no ",
(reg54 & 0x02) ? "yes" : "no ",
(reg54 & 0x04) ? "yes" : "no ",
(reg54 & 0x08) ? "yes" : "no " );
p += sprintf(p, "UDMA enabled: %s %s %s %s\n",
((reg56&0x0005)==0x0005)?"5":
((reg56&0x0004)==0x0004)?"4":
((reg56&0x0003)==0x0003)?"3":
((reg56&0x0002)==0x0002)?"2":
((reg56&0x0001)==0x0001)?"1":
((reg56&0x000F))?"?":"0",
((reg56&0x0050)==0x0050)?"5":
((reg56&0x0040)==0x0040)?"4":
((reg56&0x0030)==0x0030)?"3":
((reg56&0x0020)==0x0020)?"2":
((reg56&0x0010)==0x0010)?"1":
((reg56&0x00F0))?"?":"0",
((reg56&0x0500)==0x0500)?"5":
((reg56&0x0400)==0x0400)?"4":
((reg56&0x0300)==0x0300)?"3":
((reg56&0x0200)==0x0200)?"2":
((reg56&0x0100)==0x0100)?"1":
((reg56&0x0F00))?"?":"0",
((reg56&0x5000)==0x5000)?"5":
((reg56&0x4000)==0x4000)?"4":
((reg56&0x3000)==0x3000)?"3":
((reg56&0x2000)==0x2000)?"2":
((reg56&0x1000)==0x1000)?"1":
((reg56&0xF000))?"?":"0");
p += sprintf(p, "DMA enabled: %s %s %s %s\n",
((reg44&0x00002000)==0x00002000)?"2":
((reg44&0x00002100)==0x00002100)?"1":
((reg44&0x00007700)==0x00007700)?"0":
((reg44&0x0000FF00)==0x0000FF00)?"X":"?",
((reg44&0x00000020)==0x00000020)?"2":
((reg44&0x00000021)==0x00000021)?"1":
((reg44&0x00000077)==0x00000077)?"0":
((reg44&0x000000FF)==0x000000FF)?"X":"?",
((reg44&0x20000000)==0x20000000)?"2":
((reg44&0x21000000)==0x21000000)?"1":
((reg44&0x77000000)==0x77000000)?"0":
((reg44&0xFF000000)==0xFF000000)?"X":"?",
((reg44&0x00200000)==0x00200000)?"2":
((reg44&0x00210000)==0x00210000)?"1":
((reg44&0x00770000)==0x00770000)?"0":
((reg44&0x00FF0000)==0x00FF0000)?"X":"?");
#if 0
if (bmide_dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
p += sprintf(p, "PIO enabled: %s %s %s %s\n",
if (bmide_dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4)
#endif
p += sprintf(p, "PIO enabled: %s %s %s %s\n",
((reg40&0x00002000)==0x00002000)?"4":
((reg40&0x00002200)==0x00002200)?"3":
((reg40&0x00003400)==0x00003400)?"2":
((reg40&0x00004700)==0x00004700)?"1":
((reg40&0x00005D00)==0x00005D00)?"0":"?",
((reg40&0x00000020)==0x00000020)?"4":
((reg40&0x00000022)==0x00000022)?"3":
((reg40&0x00000034)==0x00000034)?"2":
((reg40&0x00000047)==0x00000047)?"1":
((reg40&0x0000005D)==0x0000005D)?"0":"?",
((reg40&0x20000000)==0x20000000)?"4":
((reg40&0x22000000)==0x22000000)?"3":
((reg40&0x34000000)==0x34000000)?"2":
((reg40&0x47000000)==0x47000000)?"1":
((reg40&0x5D000000)==0x5D000000)?"0":"?",
((reg40&0x00200000)==0x00200000)?"4":
((reg40&0x00220000)==0x00220000)?"3":
((reg40&0x00340000)==0x00340000)?"2":
((reg40&0x00470000)==0x00470000)?"1":
((reg40&0x005D0000)==0x005D0000)?"0":"?");
return p-buffer; /* => must be less than 4k! */
}
#endif /* defined(DISPLAY_SVWKS_TIMINGS) && defined(CONFIG_PROC_FS) */
static byte svwks_revision = 0;
byte svwks_proc = 0;
extern char *ide_xfer_verbose (byte xfer_rate);
static struct pci_dev *isa_dev;
static int svwks_tune_chipset (ide_drive_t *drive, byte speed)
{
byte udma_modes[] = { 0x00, 0x01, 0x02, 0x03, 0x04, 0x05 };
byte dma_modes[] = { 0x77, 0x21, 0x20 };
byte pio_modes[] = { 0x5d, 0x47, 0x34, 0x22, 0x20 };
ide_hwif_t *hwif = HWIF(drive);
struct pci_dev *dev = hwif->pci_dev;
byte unit = (drive->select.b.unit & 0x01);
byte csb5 = (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) ? 1 : 0;
#ifdef CONFIG_BLK_DEV_IDEDMA
unsigned long dma_base = hwif->dma_base;
#endif /* CONFIG_BLK_DEV_IDEDMA */
int err;
byte drive_pci = 0x00;
byte drive_pci2 = 0x00;
byte drive_pci3 = hwif->channel ? 0x57 : 0x56;
byte ultra_enable = 0x00;
byte ultra_timing = 0x00;
byte dma_timing = 0x00;
byte pio_timing = 0x00;
unsigned short csb5_pio = 0x00;
byte pio = ide_get_best_pio_mode(drive, 255, 5, NULL);
switch (drive->dn) {
case 0: drive_pci = 0x41; drive_pci2 = 0x45; break;
case 1: drive_pci = 0x40; drive_pci2 = 0x44; break;
case 2: drive_pci = 0x43; drive_pci2 = 0x47; break;
case 3: drive_pci = 0x42; drive_pci2 = 0x46; break;
default:
return -1;
}
pci_read_config_byte(dev, drive_pci, &pio_timing);
pci_read_config_byte(dev, drive_pci2, &dma_timing);
pci_read_config_byte(dev, drive_pci3, &ultra_timing);
pci_read_config_word(dev, 0x4A, &csb5_pio);
pci_read_config_byte(dev, 0x54, &ultra_enable);
#ifdef DEBUG
printk("%s: UDMA 0x%02x DMAPIO 0x%02x PIO 0x%02x ",
drive->name, ultra_timing, dma_timing, pio_timing);
#endif
pio_timing &= ~0xFF;
dma_timing &= ~0xFF;
ultra_timing &= ~(0x0F << (4*unit));
ultra_enable &= ~(0x01 << drive->dn);
csb5_pio &= ~(0x0F << (4*drive->dn));
switch(speed) {
case XFER_PIO_4:
case XFER_PIO_3:
case XFER_PIO_2:
case XFER_PIO_1:
case XFER_PIO_0:
pio_timing |= pio_modes[speed - XFER_PIO_0];
csb5_pio |= ((speed - XFER_PIO_0) << (4*drive->dn));
break;
#ifdef CONFIG_BLK_DEV_IDEDMA
case XFER_MW_DMA_2:
case XFER_MW_DMA_1:
case XFER_MW_DMA_0:
pio_timing |= pio_modes[pio];
csb5_pio |= (pio << (4*drive->dn));
dma_timing |= dma_modes[speed - XFER_MW_DMA_0];
break;
case XFER_UDMA_5:
case XFER_UDMA_4:
case XFER_UDMA_3:
case XFER_UDMA_2:
case XFER_UDMA_1:
case XFER_UDMA_0:
pio_timing |= pio_modes[pio];
csb5_pio |= (pio << (4*drive->dn));
dma_timing |= dma_modes[2];
ultra_timing |= ((udma_modes[speed - XFER_UDMA_0]) << (4*unit));
ultra_enable |= (0x01 << drive->dn);
#endif
default:
break;
}
#ifdef DEBUG
printk("%s: UDMA 0x%02x DMAPIO 0x%02x PIO 0x%02x ",
drive->name, ultra_timing, dma_timing, pio_timing);
#endif
#if OSB4_DEBUG_DRIVE_INFO
printk("%s: %s drive%d\n", drive->name, ide_xfer_verbose(speed), drive->dn);
#endif /* OSB4_DEBUG_DRIVE_INFO */
if (!drive->init_speed)
drive->init_speed = speed;
pci_write_config_byte(dev, drive_pci, pio_timing);
if (csb5)
pci_write_config_word(dev, 0x4A, csb5_pio);
#ifdef CONFIG_BLK_DEV_IDEDMA
pci_write_config_byte(dev, drive_pci2, dma_timing);
pci_write_config_byte(dev, drive_pci3, ultra_timing);
pci_write_config_byte(dev, 0x54, ultra_enable);
if (speed > XFER_PIO_4) {
outb(inb(dma_base+2)|(1<<(5+unit)), dma_base+2);
} else {
outb(inb(dma_base+2) & ~(1<<(5+unit)), dma_base+2);
}
#endif /* CONFIG_BLK_DEV_IDEDMA */
err = ide_config_drive_speed(drive, speed);
drive->current_speed = speed;
return err;
}
static void config_chipset_for_pio (ide_drive_t *drive)
{
unsigned short eide_pio_timing[6] = {960, 480, 240, 180, 120, 90};
unsigned short xfer_pio = drive->id->eide_pio_modes;
byte timing, speed, pio;
pio = ide_get_best_pio_mode(drive, 255, 5, NULL);
if (xfer_pio> 4)
xfer_pio = 0;
if (drive->id->eide_pio_iordy > 0) {
for (xfer_pio = 5;
xfer_pio>0 &&
drive->id->eide_pio_iordy>eide_pio_timing[xfer_pio];
xfer_pio--);
} else {
xfer_pio = (drive->id->eide_pio_modes & 4) ? 0x05 :
(drive->id->eide_pio_modes & 2) ? 0x04 :
(drive->id->eide_pio_modes & 1) ? 0x03 :
(drive->id->tPIO & 2) ? 0x02 :
(drive->id->tPIO & 1) ? 0x01 : xfer_pio;
}
timing = (xfer_pio >= pio) ? xfer_pio : pio;
switch(timing) {
case 4: speed = XFER_PIO_4;break;
case 3: speed = XFER_PIO_3;break;
case 2: speed = XFER_PIO_2;break;
case 1: speed = XFER_PIO_1;break;
default:
speed = (!drive->id->tPIO) ? XFER_PIO_0 : XFER_PIO_SLOW;
break;
}
(void) svwks_tune_chipset(drive, speed);
drive->current_speed = speed;
}
static void svwks_tune_drive (ide_drive_t *drive, byte pio)
{
byte speed;
switch(pio) {
case 4: speed = XFER_PIO_4;break;
case 3: speed = XFER_PIO_3;break;
case 2: speed = XFER_PIO_2;break;
case 1: speed = XFER_PIO_1;break;
default: speed = XFER_PIO_0;break;
}
(void) svwks_tune_chipset(drive, speed);
}
#ifdef CONFIG_BLK_DEV_IDEDMA
static int config_chipset_for_dma (ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
struct pci_dev *dev = HWIF(drive)->pci_dev;
byte udma_66 = eighty_ninty_three(drive);
byte speed;
int ultra66 = (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) ? 1 : 0;
/* need specs to figure out if osb4 is capable of ata/66/100 */
int ultra100 = (dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE) ? 1 : 0;
if ((id->dma_ultra & 0x0020) && (udma_66) && (ultra100)) {
speed = XFER_UDMA_5;
} else if (id->dma_ultra & 0x0010) {
speed = ((udma_66) && (ultra66)) ? XFER_UDMA_4 : XFER_UDMA_2;
} else if (id->dma_ultra & 0x0008) {
speed = ((udma_66) && (ultra66)) ? XFER_UDMA_3 : XFER_UDMA_1;
} else if (id->dma_ultra & 0x0004) {
speed = XFER_UDMA_2;
} else if (id->dma_ultra & 0x0002) {
speed = XFER_UDMA_1;
} else if (id->dma_ultra & 0x0001) {
speed = XFER_UDMA_0;
} else if (id->dma_mword & 0x0004) {
speed = XFER_MW_DMA_2;
} else if (id->dma_mword & 0x0002) {
speed = XFER_MW_DMA_1;
} else if (id->dma_1word & 0x0004) {
speed = XFER_SW_DMA_2;
} else {
speed = XFER_PIO_0 + ide_get_best_pio_mode(drive, 255, 5, NULL);
}
(void) svwks_tune_chipset(drive, speed);
return ((int) ((id->dma_ultra >> 11) & 7) ? ide_dma_on :
((id->dma_ultra >> 8) & 7) ? ide_dma_on :
((id->dma_mword >> 8) & 7) ? ide_dma_on :
((id->dma_1word >> 8) & 7) ? ide_dma_on :
ide_dma_off_quietly);
}
static int config_drive_xfer_rate (ide_drive_t *drive)
{
struct hd_driveid *id = drive->id;
ide_dma_action_t dma_func = ide_dma_on;
if (id && (id->capability & 1) && HWIF(drive)->autodma) {
/* Consult the list of known "bad" drives */
if (ide_dmaproc(ide_dma_bad_drive, drive)) {
dma_func = ide_dma_off;
goto fast_ata_pio;
}
dma_func = ide_dma_off_quietly;
if (id->field_valid & 4) {
if (id->dma_ultra & 0x002F) {
/* Force if Capable UltraDMA */
dma_func = config_chipset_for_dma(drive);
if ((id->field_valid & 2) &&
(dma_func != ide_dma_on))
goto try_dma_modes;
}
} else if (id->field_valid & 2) {
try_dma_modes:
if ((id->dma_mword & 0x0007) ||
(id->dma_1word & 0x007)) {
/* Force if Capable regular DMA modes */
dma_func = config_chipset_for_dma(drive);
if (dma_func != ide_dma_on)
goto no_dma_set;
}
} else if (ide_dmaproc(ide_dma_good_drive, drive)) {
if (id->eide_dma_time > 150) {
goto no_dma_set;
}
/* Consult the list of known "good" drives */
dma_func = config_chipset_for_dma(drive);
if (dma_func != ide_dma_on)
goto no_dma_set;
} else {
goto fast_ata_pio;
}
} else if ((id->capability & 8) || (id->field_valid & 2)) {
fast_ata_pio:
dma_func = ide_dma_off_quietly;
no_dma_set:
config_chipset_for_pio(drive);
}
return HWIF(drive)->dmaproc(dma_func, drive);
}
static int svwks_dmaproc(ide_dma_action_t func, ide_drive_t *drive)
{
switch (func) {
case ide_dma_check:
return config_drive_xfer_rate(drive);
default :
break;
}
/* Other cases are done by generic IDE-DMA code. */
return ide_dmaproc(func, drive);
}
#endif /* CONFIG_BLK_DEV_IDEDMA */
unsigned int __init pci_init_svwks (struct pci_dev *dev, const char *name)
{
unsigned int reg64;
pci_read_config_byte(dev, PCI_REVISION_ID, &svwks_revision);
if (dev->device == PCI_DEVICE_ID_SERVERWORKS_OSB4IDE) {
isa_dev = pci_find_device(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_OSB4, NULL);
pci_read_config_dword(isa_dev, 0x64, ®64);
#ifdef DEBUG
printk("%s: reg64 == 0x%08x\n", name, reg64);
#endif
// reg64 &= ~0x0000A000;
//#ifdef CONFIG_SMP
// reg64 |= 0x00008000;
//#endif
/* Assume the APIC was set up properly by the BIOS for now . If it
wasnt we need to do a fix up _way_ earlier. Bits 15,10,3 control
APIC enable, routing and decode */
reg64 &= ~0x00002000;
pci_write_config_dword(isa_dev, 0x64, reg64);
}
pci_write_config_byte(dev, PCI_LATENCY_TIMER, 0x40);
#if defined(DISPLAY_SVWKS_TIMINGS) && defined(CONFIG_PROC_FS)
if (!svwks_proc) {
svwks_proc = 1;
bmide_dev = dev;
svwks_display_info = &svwks_get_info;
}
#endif /* DISPLAY_SVWKS_TIMINGS && CONFIG_PROC_FS */
return 0;
}
/* On Dell PowerEdge servers with a CSB5, the top two bits of the subsystem
* device ID indicate presence of an 80-pin cable.
* Bit 15 clear = secondary IDE channel does not have 80-pin cable.
* Bit 15 set = secondary IDE channel has 80-pin cable.
* Bit 14 clear = primary IDE channel does not have 80-pin cable.
* Bit 14 set = primary IDE channel has 80-pin cable.
*/
static unsigned int __init ata66_svwks_dell (ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL &&
dev->vendor == PCI_VENDOR_ID_SERVERWORKS &&
dev->device == PCI_DEVICE_ID_SERVERWORKS_CSB5IDE)
return ((1 << (hwif->channel + 14)) &
dev->subsystem_device) ? 1 : 0;
return 0;
}
unsigned int __init ata66_svwks (ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
if (dev->subsystem_vendor == PCI_VENDOR_ID_DELL)
return ata66_svwks_dell (hwif);
return 0;
}
void __init ide_init_svwks (ide_hwif_t *hwif)
{
if (!hwif->irq)
hwif->irq = hwif->channel ? 15 : 14;
hwif->tuneproc = &svwks_tune_drive;
hwif->speedproc = &svwks_tune_chipset;
#ifndef CONFIG_BLK_DEV_IDEDMA
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
hwif->autodma = 0;
return;
#else /* CONFIG_BLK_DEV_IDEDMA */
if (hwif->dma_base) {
if (!noautodma)
hwif->autodma = 1;
hwif->dmaproc = &svwks_dmaproc;
} else {
hwif->autodma = 0;
hwif->drives[0].autotune = 1;
hwif->drives[1].autotune = 1;
}
#endif /* !CONFIG_BLK_DEV_IDEDMA */
}
|