Viewing file:  ns87415.c (5.49 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* linux/drivers/ide/ns87415.c Version 1.01 Mar. 18, 2000
*
* Copyright (C) 1997-1998 Mark Lord <mlord@pobox.com>
* Copyright (C) 1998 Eddie C. Dost <ecd@skynet.be>
* Copyright (C) 1999-2000 Andre Hedrick <andre@linux-ide.org>
*
* Inspired by an earlier effort from David S. Miller <davem@redhat.com>
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/timer.h>
#include <linux/mm.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/pci.h>
#include <linux/delay.h>
#include <linux/ide.h>
#include <linux/init.h>
#include <asm/io.h>
static unsigned int ns87415_count = 0, ns87415_control[MAX_HWIFS] = { 0 };
/*
* This routine either enables/disables (according to drive->present)
* the IRQ associated with the port (HWIF(drive)),
* and selects either PIO or DMA handshaking for the next I/O operation.
*/
static void ns87415_prepare_drive (ide_drive_t *drive, unsigned int use_dma)
{
ide_hwif_t *hwif = HWIF(drive);
unsigned int bit, other, new, *old = (unsigned int *) hwif->select_data;
struct pci_dev *dev = hwif->pci_dev;
unsigned long flags;
__save_flags(flags); /* local CPU only */
__cli(); /* local CPU only */
new = *old;
/* Adjust IRQ enable bit */
bit = 1 << (8 + hwif->channel);
new = drive->present ? (new & ~bit) : (new | bit);
/* Select PIO or DMA, DMA may only be selected for one drive/channel. */
bit = 1 << (20 + drive->select.b.unit + (hwif->channel << 1));
other = 1 << (20 + (1 - drive->select.b.unit) + (hwif->channel << 1));
new = use_dma ? ((new & ~other) | bit) : (new & ~bit);
if (new != *old) {
unsigned char stat;
/*
* Don't change DMA engine settings while Write Buffers
* are busy.
*/
(void) pci_read_config_byte(dev, 0x43, &stat);
while (stat & 0x03) {
udelay(1);
(void) pci_read_config_byte(dev, 0x43, &stat);
}
*old = new;
(void) pci_write_config_dword(dev, 0x40, new);
/*
* And let things settle...
*/
udelay(10);
}
__restore_flags(flags); /* local CPU only */
}
static void ns87415_selectproc (ide_drive_t *drive)
{
ns87415_prepare_drive (drive, drive->using_dma);
}
#ifdef CONFIG_BLK_DEV_IDEDMA
static int ns87415_dmaproc(ide_dma_action_t func, ide_drive_t *drive)
{
ide_hwif_t *hwif = HWIF(drive);
byte dma_stat;
switch (func) {
case ide_dma_end: /* returns 1 on error, 0 otherwise */
drive->waiting_for_dma = 0;
dma_stat = inb(hwif->dma_base+2);
outb(inb(hwif->dma_base)&~1, hwif->dma_base); /* stop DMA */
outb(inb(hwif->dma_base)|6, hwif->dma_base); /* from ERRATA: clear the INTR & ERROR bits */
ide_destroy_dmatable(drive); /* and free any DMA resources */
return (dma_stat & 7) != 4; /* verify good DMA status */
case ide_dma_write:
case ide_dma_read:
ns87415_prepare_drive(drive, 1); /* select DMA xfer */
if (!ide_dmaproc(func, drive)) /* use standard DMA stuff */
return 0;
ns87415_prepare_drive(drive, 0); /* DMA failed: select PIO xfer */
return 1;
case ide_dma_check:
if (drive->media != ide_disk)
return ide_dmaproc(ide_dma_off_quietly, drive);
/* Fallthrough... */
default:
return ide_dmaproc(func, drive); /* use standard DMA stuff */
}
}
#endif /* CONFIG_BLK_DEV_IDEDMA */
void __init ide_init_ns87415 (ide_hwif_t *hwif)
{
struct pci_dev *dev = hwif->pci_dev;
unsigned int ctrl, using_inta;
byte progif;
#ifdef __sparc_v9__
int timeout;
byte stat;
#endif
/* Set a good latency timer and cache line size value. */
(void) pci_write_config_byte(dev, PCI_LATENCY_TIMER, 64);
#ifdef __sparc_v9__
(void) pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 0x10);
#endif
/*
* We cannot probe for IRQ: both ports share common IRQ on INTA.
* Also, leave IRQ masked during drive probing, to prevent infinite
* interrupts from a potentially floating INTA..
*
* IRQs get unmasked in selectproc when drive is first used.
*/
(void) pci_read_config_dword(dev, 0x40, &ctrl);
(void) pci_read_config_byte(dev, 0x09, &progif);
/* is irq in "native" mode? */
using_inta = progif & (1 << (hwif->channel << 1));
if (!using_inta)
using_inta = ctrl & (1 << (4 + hwif->channel));
if (hwif->mate) {
hwif->select_data = hwif->mate->select_data;
} else {
hwif->select_data = (unsigned long)
&ns87415_control[ns87415_count++];
ctrl |= (1 << 8) | (1 << 9); /* mask both IRQs */
if (using_inta)
ctrl &= ~(1 << 6); /* unmask INTA */
*((unsigned int *)hwif->select_data) = ctrl;
(void) pci_write_config_dword(dev, 0x40, ctrl);
/*
* Set prefetch size to 512 bytes for both ports,
* but don't turn on/off prefetching here.
*/
pci_write_config_byte(dev, 0x55, 0xee);
#ifdef __sparc_v9__
/*
* XXX: Reset the device, if we don't it will not respond
* to SELECT_DRIVE() properly during first probe_hwif().
*/
timeout = 10000;
outb(12, hwif->io_ports[IDE_CONTROL_OFFSET]);
udelay(10);
outb(8, hwif->io_ports[IDE_CONTROL_OFFSET]);
do {
udelay(50);
stat = inb(hwif->io_ports[IDE_STATUS_OFFSET]);
if (stat == 0xff)
break;
} while ((stat & BUSY_STAT) && --timeout);
#endif
}
if (hwif->dma_base)
outb(0x60, hwif->dma_base + 2);
if (!using_inta)
hwif->irq = hwif->channel ? 15 : 14; /* legacy mode */
else if (!hwif->irq && hwif->mate && hwif->mate->irq)
hwif->irq = hwif->mate->irq; /* share IRQ with mate */
#ifdef CONFIG_BLK_DEV_IDEDMA
if (hwif->dma_base)
hwif->dmaproc = &ns87415_dmaproc;
#endif /* CONFIG_BLK_DEV_IDEDMA */
hwif->selectproc = &ns87415_selectproc;
}
|