Viewing file:  buddha.c (5.65 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* linux/drivers/ide/buddha.c -- Amiga Buddha, Catweasel and X-Surf IDE Driver
*
* Copyright (C) 1997 by Geert Uytterhoeven
*
* This driver was written by based on the specifications in README.buddha and
* the X-Surf info from Inside_XSurf.txt available at
* http://www.jschoenfeld.com
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive for
* more details.
*
* TODO:
* - test it :-)
* - tune the timings using the speed-register
*/
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/interrupt.h>
#include <linux/blkdev.h>
#include <linux/hdreg.h>
#include <linux/zorro.h>
#include <linux/ide.h>
#include <linux/init.h>
#include <asm/amigahw.h>
#include <asm/amigaints.h>
/*
* The Buddha has 2 IDE interfaces, the Catweasel has 3, X-Surf has 2
*/
#define BUDDHA_NUM_HWIFS 2
#define CATWEASEL_NUM_HWIFS 3
#define XSURF_NUM_HWIFS 2
/*
* Bases of the IDE interfaces (relative to the board address)
*/
#define BUDDHA_BASE1 0x800
#define BUDDHA_BASE2 0xa00
#define BUDDHA_BASE3 0xc00
#define XSURF_BASE1 0xb000 /* 2.5" Interface */
#define XSURF_BASE2 0xd000 /* 3.5" Interface */
static u_int buddha_bases[CATWEASEL_NUM_HWIFS] __initdata = {
BUDDHA_BASE1, BUDDHA_BASE2, BUDDHA_BASE3
};
static const u_int xsurf_bases[XSURF_NUM_HWIFS] __initdata = {
XSURF_BASE1, XSURF_BASE2
};
/*
* Offsets from one of the above bases
*/
#define BUDDHA_DATA 0x00
#define BUDDHA_ERROR 0x06 /* see err-bits */
#define BUDDHA_NSECTOR 0x0a /* nr of sectors to read/write */
#define BUDDHA_SECTOR 0x0e /* starting sector */
#define BUDDHA_LCYL 0x12 /* starting cylinder */
#define BUDDHA_HCYL 0x16 /* high byte of starting cyl */
#define BUDDHA_SELECT 0x1a /* 101dhhhh , d=drive, hhhh=head */
#define BUDDHA_STATUS 0x1e /* see status-bits */
#define BUDDHA_CONTROL 0x11a
#define XSURF_CONTROL -1 /* X-Surf has no CS1* (Control/AltStat) */
static int buddha_offsets[IDE_NR_PORTS] __initdata = {
BUDDHA_DATA, BUDDHA_ERROR, BUDDHA_NSECTOR, BUDDHA_SECTOR, BUDDHA_LCYL,
BUDDHA_HCYL, BUDDHA_SELECT, BUDDHA_STATUS, BUDDHA_CONTROL, -1
};
static int xsurf_offsets[IDE_NR_PORTS] __initdata = {
BUDDHA_DATA, BUDDHA_ERROR, BUDDHA_NSECTOR, BUDDHA_SECTOR, BUDDHA_LCYL,
BUDDHA_HCYL, BUDDHA_SELECT, BUDDHA_STATUS, XSURF_CONTROL, -1
};
/*
* Other registers
*/
#define BUDDHA_IRQ1 0xf00 /* MSB = 1, Harddisk is source of */
#define BUDDHA_IRQ2 0xf40 /* interrupt */
#define BUDDHA_IRQ3 0xf80
#define XSURF_IRQ1 0x7e
#define XSURF_IRQ2 0x7e
static int buddha_irqports[CATWEASEL_NUM_HWIFS] __initdata = {
BUDDHA_IRQ1, BUDDHA_IRQ2, BUDDHA_IRQ3
};
static const int xsurf_irqports[XSURF_NUM_HWIFS] __initdata = {
XSURF_IRQ1, XSURF_IRQ2
};
#define BUDDHA_IRQ_MR 0xfc0 /* master interrupt enable */
/*
* Board information
*/
enum BuddhaType_Enum {BOARD_BUDDHA, BOARD_CATWEASEL, BOARD_XSURF};
typedef enum BuddhaType_Enum BuddhaType;
/*
* Check and acknowledge the interrupt status
*/
static int buddha_ack_intr(ide_hwif_t *hwif)
{
unsigned char ch;
ch = z_readb(hwif->io_ports[IDE_IRQ_OFFSET]);
if (!(ch & 0x80))
return 0;
return 1;
}
static int xsurf_ack_intr(ide_hwif_t *hwif)
{
unsigned char ch;
ch = z_readb(hwif->io_ports[IDE_IRQ_OFFSET]);
/* X-Surf needs a 0 written to IRQ register to ensure ISA bit A11 stays at 0 */
z_writeb(0, hwif->io_ports[IDE_IRQ_OFFSET]);
if (!(ch & 0x80))
return 0;
return 1;
}
/*
* Probe for a Buddha or Catweasel IDE interface
*/
void __init buddha_init(void)
{
hw_regs_t hw;
int i, index;
struct zorro_dev *z = NULL;
u_long buddha_board = 0;
BuddhaType type;
int buddha_num_hwifs;
while ((z = zorro_find_device(ZORRO_WILDCARD, z))) {
unsigned long board;
if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_BUDDHA) {
buddha_num_hwifs = BUDDHA_NUM_HWIFS;
type=BOARD_BUDDHA;
} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_CATWEASEL) {
buddha_num_hwifs = CATWEASEL_NUM_HWIFS;
type=BOARD_CATWEASEL;
} else if (z->id == ZORRO_PROD_INDIVIDUAL_COMPUTERS_X_SURF) {
buddha_num_hwifs = XSURF_NUM_HWIFS;
type=BOARD_XSURF;
} else
continue;
board = z->resource.start;
if(type != BOARD_XSURF) {
if (!request_mem_region(board+BUDDHA_BASE1, 0x800, "IDE"))
continue;
} else {
if (!request_mem_region(board+XSURF_BASE1, 0x1000, "IDE"))
continue;
if (!request_mem_region(board+XSURF_BASE2, 0x1000, "IDE"))
continue;
if (!request_mem_region(board+XSURF_IRQ1, 0x8, "IDE"))
continue;
}
buddha_board = ZTWO_VADDR(board);
/* write to BUDDHA_IRQ_MR to enable the board IRQ */
/* X-Surf doesn't have this. IRQs are always on */
if(type != BOARD_XSURF) *(char *)(buddha_board+BUDDHA_IRQ_MR) = 0;
for(i=0;i<buddha_num_hwifs;i++) {
if(type != BOARD_XSURF) {
ide_setup_ports(&hw, (ide_ioreg_t)(buddha_board+buddha_bases[i]),
buddha_offsets, 0,
(ide_ioreg_t)(buddha_board+buddha_irqports[i]),
buddha_ack_intr, IRQ_AMIGA_PORTS);
} else {
ide_setup_ports(&hw, (ide_ioreg_t)(buddha_board+xsurf_bases[i]),
xsurf_offsets, 0,
(ide_ioreg_t)(buddha_board+xsurf_irqports[i]),
xsurf_ack_intr, IRQ_AMIGA_PORTS);
}
index = ide_register_hw(&hw, NULL);
if (index != -1) {
printk("ide%d: ", index);
switch(type) {
case BOARD_BUDDHA:
printk("Buddha");
break;
case BOARD_CATWEASEL:
printk("Catweasel");
break;
case BOARD_XSURF:
printk("X-Surf");
break;
}
printk(" IDE interface\n");
}
}
}
}
|