Viewing file:  i2c-core.c (36.47 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/* i2c-core.c - a device driver for the iic-bus interface */
/* ------------------------------------------------------------------------- */
/* Copyright (C) 1995-99 Simon G. Vogl
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */
/* ------------------------------------------------------------------------- */
/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>.
All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl> */
/* $Id: i2c-core.c,v 1.64 2001/08/13 01:35:56 mds Exp $ */
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/errno.h>
#include <linux/slab.h>
#include <linux/proc_fs.h>
#include <linux/config.h>
#include <linux/i2c.h>
/* ----- compatibility stuff ----------------------------------------------- */
#include <linux/version.h>
#include <linux/init.h>
#if LINUX_VERSION_CODE < KERNEL_VERSION(2,3,1)
#define init_MUTEX(s) do { *(s) = MUTEX; } while(0)
#endif
#include <asm/uaccess.h>
/* ----- global defines ---------------------------------------------------- */
/* exclusive access to the bus */
#define I2C_LOCK(adap) down(&adap->lock)
#define I2C_UNLOCK(adap) up(&adap->lock)
#define ADAP_LOCK() down(&adap_lock)
#define ADAP_UNLOCK() up(&adap_lock)
#define DRV_LOCK() down(&driver_lock)
#define DRV_UNLOCK() up(&driver_lock)
#define DEB(x) if (i2c_debug>=1) x;
#define DEB2(x) if (i2c_debug>=2) x;
/* ----- global variables -------------------------------------------------- */
/**** lock for writing to global variables: the adapter & driver list */
struct semaphore adap_lock;
struct semaphore driver_lock;
/**** adapter list */
static struct i2c_adapter *adapters[I2C_ADAP_MAX];
static int adap_count;
/**** drivers list */
static struct i2c_driver *drivers[I2C_DRIVER_MAX];
static int driver_count;
/**** debug level */
static int i2c_debug=1;
/* ---------------------------------------------------
* /proc entry declarations
*----------------------------------------------------
*/
#ifdef CONFIG_PROC_FS
static int i2cproc_init(void);
static int i2cproc_cleanup(void);
#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,3,27))
static void monitor_bus_i2c(struct inode *inode, int fill);
#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2,1,58)) */
static ssize_t i2cproc_bus_read(struct file * file, char * buf,size_t count,
loff_t *ppos);
static int read_bus_i2c(char *buf, char **start, off_t offset, int len,
int *eof , void *private);
/* To implement the dynamic /proc/bus/i2c-? files, we need our own
implementation of the read hook */
static struct file_operations i2cproc_operations = {
read: i2cproc_bus_read,
};
#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,48))
static struct inode_operations i2cproc_inode_operations = {
&i2cproc_operations
};
#endif
static int i2cproc_initialized = 0;
#else /* undef CONFIG_PROC_FS */
#define i2cproc_init() 0
#define i2cproc_cleanup() 0
#endif /* CONFIG_PROC_FS */
/* ---------------------------------------------------
* registering functions
* ---------------------------------------------------
*/
/* -----
* i2c_add_adapter is called from within the algorithm layer,
* when a new hw adapter registers. A new device is register to be
* available for clients.
*/
int i2c_add_adapter(struct i2c_adapter *adap)
{
int i,j,res;
ADAP_LOCK();
for (i = 0; i < I2C_ADAP_MAX; i++)
if (NULL == adapters[i])
break;
if (I2C_ADAP_MAX == i) {
printk(KERN_WARNING
" i2c-core.o: register_adapter(%s) - enlarge I2C_ADAP_MAX.\n",
adap->name);
res = -ENOMEM;
goto ERROR0;
}
adapters[i] = adap;
adap_count++;
ADAP_UNLOCK();
/* init data types */
init_MUTEX(&adap->lock);
#ifdef CONFIG_PROC_FS
if (i2cproc_initialized) {
char name[8];
struct proc_dir_entry *proc_entry;
sprintf(name,"i2c-%d", i);
proc_entry = create_proc_entry(name,0,proc_bus);
if (! proc_entry) {
printk("i2c-core.o: Could not create /proc/bus/%s\n",
name);
res = -ENOENT;
goto ERROR1;
}
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,48))
proc_entry->proc_fops = &i2cproc_operations;
#else
proc_entry->ops = &i2cproc_inode_operations;
#endif
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,27))
proc_entry->owner = THIS_MODULE;
#else
proc_entry->fill_inode = &monitor_bus_i2c;
#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2,1,58)) */
adap->inode = proc_entry->low_ino;
}
#endif /* def CONFIG_PROC_FS */
/* inform drivers of new adapters */
DRV_LOCK();
for (j=0;j<I2C_DRIVER_MAX;j++)
if (drivers[j]!=NULL &&
(drivers[j]->flags&(I2C_DF_NOTIFY|I2C_DF_DUMMY)))
/* We ignore the return code; if it fails, too bad */
drivers[j]->attach_adapter(adap);
DRV_UNLOCK();
DEB(printk("i2c-core.o: adapter %s registered as adapter %d.\n",
adap->name,i));
return 0;
ERROR1:
ADAP_LOCK();
adapters[i] = NULL;
adap_count--;
ERROR0:
ADAP_UNLOCK();
return res;
}
int i2c_del_adapter(struct i2c_adapter *adap)
{
int i,j,res;
ADAP_LOCK();
for (i = 0; i < I2C_ADAP_MAX; i++)
if (adap == adapters[i])
break;
if (I2C_ADAP_MAX == i) {
printk( "i2c-core.o: unregister_adapter adap [%s] not found.\n",
adap->name);
res = -ENODEV;
goto ERROR0;
}
/* DUMMY drivers do not register their clients, so we have to
* use a trick here: we call driver->attach_adapter to
* *detach* it! Of course, each dummy driver should know about
* this or hell will break loose...
*/
DRV_LOCK();
for (j = 0; j < I2C_DRIVER_MAX; j++)
if (drivers[j] && (drivers[j]->flags & I2C_DF_DUMMY))
if ((res = drivers[j]->attach_adapter(adap))) {
printk("i2c-core.o: can't detach adapter %s "
"while detaching driver %s: driver not "
"detached!",adap->name,drivers[j]->name);
goto ERROR1;
}
DRV_UNLOCK();
/* detach any active clients. This must be done first, because
* it can fail; in which case we give upp. */
for (j=0;j<I2C_CLIENT_MAX;j++) {
struct i2c_client *client = adap->clients[j];
if (client!=NULL)
/* detaching devices is unconditional of the set notify
* flag, as _all_ clients that reside on the adapter
* must be deleted, as this would cause invalid states.
*/
if ((res=client->driver->detach_client(client))) {
printk("i2c-core.o: adapter %s not "
"unregistered, because client at "
"address %02x can't be detached. ",
adap->name, client->addr);
goto ERROR0;
}
}
#ifdef CONFIG_PROC_FS
if (i2cproc_initialized) {
char name[8];
sprintf(name,"i2c-%d", i);
remove_proc_entry(name,proc_bus);
}
#endif /* def CONFIG_PROC_FS */
adapters[i] = NULL;
adap_count--;
ADAP_UNLOCK();
DEB(printk("i2c-core.o: adapter unregistered: %s\n",adap->name));
return 0;
ERROR0:
ADAP_UNLOCK();
return res;
ERROR1:
DRV_UNLOCK();
return res;
}
/* -----
* What follows is the "upwards" interface: commands for talking to clients,
* which implement the functions to access the physical information of the
* chips.
*/
int i2c_add_driver(struct i2c_driver *driver)
{
int i;
DRV_LOCK();
for (i = 0; i < I2C_DRIVER_MAX; i++)
if (NULL == drivers[i])
break;
if (I2C_DRIVER_MAX == i) {
printk(KERN_WARNING
" i2c-core.o: register_driver(%s) "
"- enlarge I2C_DRIVER_MAX.\n",
driver->name);
DRV_UNLOCK();
return -ENOMEM;
}
drivers[i] = driver;
driver_count++;
DRV_UNLOCK(); /* driver was successfully added */
DEB(printk("i2c-core.o: driver %s registered.\n",driver->name));
ADAP_LOCK();
/* now look for instances of driver on our adapters
*/
if (driver->flags& (I2C_DF_NOTIFY|I2C_DF_DUMMY)) {
for (i=0;i<I2C_ADAP_MAX;i++)
if (adapters[i]!=NULL)
/* Ignore errors */
driver->attach_adapter(adapters[i]);
}
ADAP_UNLOCK();
return 0;
}
int i2c_del_driver(struct i2c_driver *driver)
{
int i,j,k,res;
DRV_LOCK();
for (i = 0; i < I2C_DRIVER_MAX; i++)
if (driver == drivers[i])
break;
if (I2C_DRIVER_MAX == i) {
printk(KERN_WARNING " i2c-core.o: unregister_driver: "
"[%s] not found\n",
driver->name);
DRV_UNLOCK();
return -ENODEV;
}
/* Have a look at each adapter, if clients of this driver are still
* attached. If so, detach them to be able to kill the driver
* afterwards.
*/
DEB2(printk("i2c-core.o: unregister_driver - looking for clients.\n"));
/* removing clients does not depend on the notify flag, else
* invalid operation might (will!) result, when using stale client
* pointers.
*/
ADAP_LOCK(); /* should be moved inside the if statement... */
for (k=0;k<I2C_ADAP_MAX;k++) {
struct i2c_adapter *adap = adapters[k];
if (adap == NULL) /* skip empty entries. */
continue;
DEB2(printk("i2c-core.o: examining adapter %s:\n",
adap->name));
if (driver->flags & I2C_DF_DUMMY) {
/* DUMMY drivers do not register their clients, so we have to
* use a trick here: we call driver->attach_adapter to
* *detach* it! Of course, each dummy driver should know about
* this or hell will break loose...
*/
if ((res = driver->attach_adapter(adap))) {
printk("i2c-core.o: while unregistering "
"dummy driver %s, adapter %s could "
"not be detached properly; driver "
"not unloaded!",driver->name,
adap->name);
ADAP_UNLOCK();
return res;
}
} else {
for (j=0;j<I2C_CLIENT_MAX;j++) {
struct i2c_client *client = adap->clients[j];
if (client != NULL &&
client->driver == driver) {
DEB2(printk("i2c-core.o: "
"detaching client %s:\n",
client->name));
if ((res = driver->
detach_client(client)))
{
printk("i2c-core.o: while "
"unregistering driver "
"`%s', the client at "
"address %02x of
adapter `%s' could not
be detached; driver
not unloaded!",
driver->name,
client->addr,
adap->name);
ADAP_UNLOCK();
return res;
}
}
}
}
}
ADAP_UNLOCK();
drivers[i] = NULL;
driver_count--;
DRV_UNLOCK();
DEB(printk("i2c-core.o: driver unregistered: %s\n",driver->name));
return 0;
}
int i2c_check_addr (struct i2c_adapter *adapter, int addr)
{
int i;
for (i = 0; i < I2C_CLIENT_MAX ; i++)
if (adapter->clients[i] && (adapter->clients[i]->addr == addr))
return -EBUSY;
return 0;
}
int i2c_attach_client(struct i2c_client *client)
{
struct i2c_adapter *adapter = client->adapter;
int i;
if (i2c_check_addr(client->adapter,client->addr))
return -EBUSY;
for (i = 0; i < I2C_CLIENT_MAX; i++)
if (NULL == adapter->clients[i])
break;
if (I2C_CLIENT_MAX == i) {
printk(KERN_WARNING
" i2c-core.o: attach_client(%s) - enlarge I2C_CLIENT_MAX.\n",
client->name);
return -ENOMEM;
}
adapter->clients[i] = client;
adapter->client_count++;
if (adapter->client_register)
if (adapter->client_register(client))
printk("i2c-core.o: warning: client_register seems "
"to have failed for client %02x at adapter %s\n",
client->addr,adapter->name);
DEB(printk("i2c-core.o: client [%s] registered to adapter [%s](pos. %d).\n",
client->name, adapter->name,i));
if(client->flags & I2C_CLIENT_ALLOW_USE)
client->usage_count = 0;
return 0;
}
int i2c_detach_client(struct i2c_client *client)
{
struct i2c_adapter *adapter = client->adapter;
int i,res;
for (i = 0; i < I2C_CLIENT_MAX; i++)
if (client == adapter->clients[i])
break;
if (I2C_CLIENT_MAX == i) {
printk(KERN_WARNING " i2c-core.o: unregister_client "
"[%s] not found\n",
client->name);
return -ENODEV;
}
if( (client->flags & I2C_CLIENT_ALLOW_USE) &&
(client->usage_count>0))
return -EBUSY;
if (adapter->client_unregister != NULL)
if ((res = adapter->client_unregister(client))) {
printk("i2c-core.o: client_unregister [%s] failed, "
"client not detached",client->name);
return res;
}
adapter->clients[i] = NULL;
adapter->client_count--;
DEB(printk("i2c-core.o: client [%s] unregistered.\n",client->name));
return 0;
}
void i2c_inc_use_client(struct i2c_client *client)
{
if (client->driver->inc_use != NULL)
client->driver->inc_use(client);
if (client->adapter->inc_use != NULL)
client->adapter->inc_use(client->adapter);
}
void i2c_dec_use_client(struct i2c_client *client)
{
if (client->driver->dec_use != NULL)
client->driver->dec_use(client);
if (client->adapter->dec_use != NULL)
client->adapter->dec_use(client->adapter);
}
struct i2c_client *i2c_get_client(int driver_id, int adapter_id,
struct i2c_client *prev)
{
int i,j;
/* Will iterate through the list of clients in each adapter of adapters-list
in search for a client that matches the search criteria. driver_id or
adapter_id are ignored if set to 0. If both are ignored this returns
first client found. */
i = j = 0;
/* set starting point */
if(prev)
{
if(!(prev->adapter))
return (struct i2c_client *) -EINVAL;
for(j=0; j < I2C_ADAP_MAX; j++)
if(prev->adapter == adapters[j])
break;
/* invalid starting point? */
if (I2C_ADAP_MAX == j) {
printk(KERN_WARNING " i2c-core.o: get_client adapter for client:[%s] not found\n",
prev->name);
return (struct i2c_client *) -ENODEV;
}
for(i=0; i < I2C_CLIENT_MAX; i++)
if(prev == adapters[j]->clients[i])
break;
/* invalid starting point? */
if (I2C_CLIENT_MAX == i) {
printk(KERN_WARNING " i2c-core.o: get_client client:[%s] not found\n",
prev->name);
return (struct i2c_client *) -ENODEV;
}
i++; /* start from one after prev */
}
for(; j < I2C_ADAP_MAX; j++)
{
if(!adapters[j])
continue;
if(adapter_id && (adapters[j]->id != adapter_id))
continue;
for(; i < I2C_CLIENT_MAX; i++)
{
if(!adapters[j]->clients[i])
continue;
if(driver_id && (adapters[j]->clients[i]->driver->id != driver_id))
continue;
if(adapters[j]->clients[i]->flags & I2C_CLIENT_ALLOW_USE)
return adapters[j]->clients[i];
}
i = 0;
}
return 0;
}
int i2c_use_client(struct i2c_client *client)
{
if(client->flags & I2C_CLIENT_ALLOW_USE) {
if (client->flags & I2C_CLIENT_ALLOW_MULTIPLE_USE)
client->usage_count++;
else {
if(client->usage_count > 0)
return -EBUSY;
else
client->usage_count++;
}
}
i2c_inc_use_client(client);
return 0;
}
int i2c_release_client(struct i2c_client *client)
{
if(client->flags & I2C_CLIENT_ALLOW_USE) {
if(client->usage_count>0)
client->usage_count--;
else
{
printk(KERN_WARNING " i2c-core.o: dec_use_client used one too many times\n");
return -EPERM;
}
}
i2c_dec_use_client(client);
return 0;
}
/* ----------------------------------------------------
* The /proc functions
* ----------------------------------------------------
*/
#ifdef CONFIG_PROC_FS
#if (LINUX_VERSION_CODE <= KERNEL_VERSION(2,3,27))
/* Monitor access to /proc/bus/i2c*; make unloading i2c-proc impossible
if some process still uses it or some file in it */
void monitor_bus_i2c(struct inode *inode, int fill)
{
if (fill)
MOD_INC_USE_COUNT;
else
MOD_DEC_USE_COUNT;
}
#endif /* (LINUX_VERSION_CODE <= KERNEL_VERSION(2,3,37)) */
/* This function generates the output for /proc/bus/i2c */
int read_bus_i2c(char *buf, char **start, off_t offset, int len, int *eof,
void *private)
{
int i;
int nr = 0;
/* Note that it is safe to write a `little' beyond len. Yes, really. */
for (i = 0; (i < I2C_ADAP_MAX) && (nr < len); i++)
if (adapters[i]) {
nr += sprintf(buf+nr, "i2c-%d\t", i);
if (adapters[i]->algo->smbus_xfer) {
if (adapters[i]->algo->master_xfer)
nr += sprintf(buf+nr,"smbus/i2c");
else
nr += sprintf(buf+nr,"smbus ");
} else if (adapters[i]->algo->master_xfer)
nr += sprintf(buf+nr,"i2c ");
else
nr += sprintf(buf+nr,"dummy ");
nr += sprintf(buf+nr,"\t%-32s\t%-32s\n",
adapters[i]->name,
adapters[i]->algo->name);
}
return nr;
}
/* This function generates the output for /proc/bus/i2c-? */
ssize_t i2cproc_bus_read(struct file * file, char * buf,size_t count,
loff_t *ppos)
{
struct inode * inode = file->f_dentry->d_inode;
char *kbuf;
struct i2c_client *client;
int i,j,k,order_nr,len=0,len_total;
int order[I2C_CLIENT_MAX];
if (count > 4000)
return -EINVAL;
len_total = file->f_pos + count;
/* Too bad if this gets longer (unlikely) */
if (len_total > 4000)
len_total = 4000;
for (i = 0; i < I2C_ADAP_MAX; i++)
if (adapters[i]->inode == inode->i_ino) {
/* We need a bit of slack in the kernel buffer; this makes the
sprintf safe. */
if (! (kbuf = kmalloc(count + 80,GFP_KERNEL)))
return -ENOMEM;
/* Order will hold the indexes of the clients
sorted by address */
order_nr=0;
for (j = 0; j < I2C_CLIENT_MAX; j++) {
if ((client = adapters[i]->clients[j]) &&
(client->driver->id != I2C_DRIVERID_I2CDEV)) {
for(k = order_nr;
(k > 0) &&
adapters[i]->clients[order[k-1]]->
addr > client->addr;
k--)
order[k] = order[k-1];
order[k] = j;
order_nr++;
}
}
for (j = 0; (j < order_nr) && (len < len_total); j++) {
client = adapters[i]->clients[order[j]];
len += sprintf(kbuf+len,"%02x\t%-32s\t%-32s\n",
client->addr,
client->name,
client->driver->name);
}
len = len - file->f_pos;
if (len > count)
len = count;
if (len < 0)
len = 0;
if (copy_to_user (buf,kbuf+file->f_pos, len)) {
kfree(kbuf);
return -EFAULT;
}
file->f_pos += len;
kfree(kbuf);
return len;
}
return -ENOENT;
}
int i2cproc_init(void)
{
struct proc_dir_entry *proc_bus_i2c;
i2cproc_initialized = 0;
if (! proc_bus) {
printk("i2c-core.o: /proc/bus/ does not exist");
i2cproc_cleanup();
return -ENOENT;
}
proc_bus_i2c = create_proc_entry("i2c",0,proc_bus);
if (!proc_bus_i2c) {
printk("i2c-core.o: Could not create /proc/bus/i2c");
i2cproc_cleanup();
return -ENOENT;
}
proc_bus_i2c->read_proc = &read_bus_i2c;
#if (LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,27))
proc_bus_i2c->owner = THIS_MODULE;
#else
proc_bus_i2c->fill_inode = &monitor_bus_i2c;
#endif /* (LINUX_VERSION_CODE >= KERNEL_VERSION(2,3,27)) */
i2cproc_initialized += 2;
return 0;
}
int i2cproc_cleanup(void)
{
if (i2cproc_initialized >= 1) {
remove_proc_entry("i2c",proc_bus);
i2cproc_initialized -= 2;
}
return 0;
}
#endif /* def CONFIG_PROC_FS */
/* ----------------------------------------------------
* the functional interface to the i2c busses.
* ----------------------------------------------------
*/
int i2c_transfer(struct i2c_adapter * adap, struct i2c_msg msgs[],int num)
{
int ret;
if (adap->algo->master_xfer) {
DEB2(printk("i2c-core.o: master_xfer: %s with %d msgs.\n",
adap->name,num));
I2C_LOCK(adap);
ret = adap->algo->master_xfer(adap,msgs,num);
I2C_UNLOCK(adap);
return ret;
} else {
printk("i2c-core.o: I2C adapter %04x: I2C level transfers not supported\n",
adap->id);
return -ENOSYS;
}
}
int i2c_master_send(struct i2c_client *client,const char *buf ,int count)
{
int ret;
struct i2c_adapter *adap=client->adapter;
struct i2c_msg msg;
if (client->adapter->algo->master_xfer) {
msg.addr = client->addr;
msg.flags = client->flags & I2C_M_TEN;
msg.len = count;
(const char *)msg.buf = buf;
DEB2(printk("i2c-core.o: master_send: writing %d bytes on %s.\n",
count,client->adapter->name));
I2C_LOCK(adap);
ret = adap->algo->master_xfer(adap,&msg,1);
I2C_UNLOCK(adap);
/* if everything went ok (i.e. 1 msg transmitted), return #bytes
* transmitted, else error code.
*/
return (ret == 1 )? count : ret;
} else {
printk("i2c-core.o: I2C adapter %04x: I2C level transfers not supported\n",
client->adapter->id);
return -ENOSYS;
}
}
int i2c_master_recv(struct i2c_client *client, char *buf ,int count)
{
struct i2c_adapter *adap=client->adapter;
struct i2c_msg msg;
int ret;
if (client->adapter->algo->master_xfer) {
msg.addr = client->addr;
msg.flags = client->flags & I2C_M_TEN;
msg.flags |= I2C_M_RD;
msg.len = count;
msg.buf = buf;
DEB2(printk("i2c-core.o: master_recv: reading %d bytes on %s.\n",
count,client->adapter->name));
I2C_LOCK(adap);
ret = adap->algo->master_xfer(adap,&msg,1);
I2C_UNLOCK(adap);
DEB2(printk("i2c-core.o: master_recv: return:%d (count:%d, addr:0x%02x)\n",
ret, count, client->addr));
/* if everything went ok (i.e. 1 msg transmitted), return #bytes
* transmitted, else error code.
*/
return (ret == 1 )? count : ret;
} else {
printk("i2c-core.o: I2C adapter %04x: I2C level transfers not supported\n",
client->adapter->id);
return -ENOSYS;
}
}
int i2c_control(struct i2c_client *client,
unsigned int cmd, unsigned long arg)
{
int ret = 0;
struct i2c_adapter *adap = client->adapter;
DEB2(printk("i2c-core.o: i2c ioctl, cmd: 0x%x, arg: %#lx\n", cmd, arg));
switch ( cmd ) {
case I2C_RETRIES:
adap->retries = arg;
break;
case I2C_TIMEOUT:
adap->timeout = arg;
break;
default:
if (adap->algo->algo_control!=NULL)
ret = adap->algo->algo_control(adap,cmd,arg);
}
return ret;
}
/* ----------------------------------------------------
* the i2c address scanning function
* Will not work for 10-bit addresses!
* ----------------------------------------------------
*/
int i2c_probe(struct i2c_adapter *adapter,
struct i2c_client_address_data *address_data,
i2c_client_found_addr_proc *found_proc)
{
int addr,i,found,err;
int adap_id = i2c_adapter_id(adapter);
/* Forget it if we can't probe using SMBUS_QUICK */
if (! i2c_check_functionality(adapter,I2C_FUNC_SMBUS_QUICK))
return -1;
for (addr = 0x00; addr <= 0x7f; addr++) {
/* Skip if already in use */
if (i2c_check_addr(adapter,addr))
continue;
/* If it is in one of the force entries, we don't do any detection
at all */
found = 0;
for (i = 0; !found && (address_data->force[i] != I2C_CLIENT_END); i += 3) {
if (((adap_id == address_data->force[i]) ||
(address_data->force[i] == ANY_I2C_BUS)) &&
(addr == address_data->force[i+1])) {
DEB2(printk("i2c-core.o: found force parameter for adapter %d, addr %04x\n",
adap_id,addr));
if ((err = found_proc(adapter,addr,0,0)))
return err;
found = 1;
}
}
if (found)
continue;
/* If this address is in one of the ignores, we can forget about
it right now */
for (i = 0;
!found && (address_data->ignore[i] != I2C_CLIENT_END);
i += 2) {
if (((adap_id == address_data->ignore[i]) ||
((address_data->ignore[i] == ANY_I2C_BUS))) &&
(addr == address_data->ignore[i+1])) {
DEB2(printk("i2c-core.o: found ignore parameter for adapter %d, "
"addr %04x\n", adap_id ,addr));
found = 1;
}
}
for (i = 0;
!found && (address_data->ignore_range[i] != I2C_CLIENT_END);
i += 3) {
if (((adap_id == address_data->ignore_range[i]) ||
((address_data->ignore_range[i]==ANY_I2C_BUS))) &&
(addr >= address_data->ignore_range[i+1]) &&
(addr <= address_data->ignore_range[i+2])) {
DEB2(printk("i2c-core.o: found ignore_range parameter for adapter %d, "
"addr %04x\n", adap_id,addr));
found = 1;
}
}
if (found)
continue;
/* Now, we will do a detection, but only if it is in the normal or
probe entries */
for (i = 0;
!found && (address_data->normal_i2c[i] != I2C_CLIENT_END);
i += 1) {
if (addr == address_data->normal_i2c[i]) {
found = 1;
DEB2(printk("i2c-core.o: found normal i2c entry for adapter %d, "
"addr %02x", adap_id,addr));
}
}
for (i = 0;
!found && (address_data->normal_i2c_range[i] != I2C_CLIENT_END);
i += 2) {
if ((addr >= address_data->normal_i2c_range[i]) &&
(addr <= address_data->normal_i2c_range[i+1])) {
found = 1;
DEB2(printk("i2c-core.o: found normal i2c_range entry for adapter %d, "
"addr %04x\n", adap_id,addr));
}
}
for (i = 0;
!found && (address_data->probe[i] != I2C_CLIENT_END);
i += 2) {
if (((adap_id == address_data->probe[i]) ||
((address_data->probe[i] == ANY_I2C_BUS))) &&
(addr == address_data->probe[i+1])) {
found = 1;
DEB2(printk("i2c-core.o: found probe parameter for adapter %d, "
"addr %04x\n", adap_id,addr));
}
}
for (i = 0;
!found && (address_data->probe_range[i] != I2C_CLIENT_END);
i += 3) {
if (((adap_id == address_data->probe_range[i]) ||
(address_data->probe_range[i] == ANY_I2C_BUS)) &&
(addr >= address_data->probe_range[i+1]) &&
(addr <= address_data->probe_range[i+2])) {
found = 1;
DEB2(printk("i2c-core.o: found probe_range parameter for adapter %d, "
"addr %04x\n", adap_id,addr));
}
}
if (!found)
continue;
/* OK, so we really should examine this address. First check
whether there is some client here at all! */
if (i2c_smbus_xfer(adapter,addr,0,0,0,I2C_SMBUS_QUICK,NULL) >= 0)
if ((err = found_proc(adapter,addr,0,-1)))
return err;
}
return 0;
}
/*
* return id number for a specific adapter
*/
int i2c_adapter_id(struct i2c_adapter *adap)
{
int i;
for (i = 0; i < I2C_ADAP_MAX; i++)
if (adap == adapters[i])
return i;
return -1;
}
/* The SMBus parts */
extern s32 i2c_smbus_write_quick(struct i2c_client * client, u8 value)
{
return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
value,0,I2C_SMBUS_QUICK,NULL);
}
extern s32 i2c_smbus_read_byte(struct i2c_client * client)
{
union i2c_smbus_data data;
if (i2c_smbus_xfer(client->adapter,client->addr,client->flags,
I2C_SMBUS_READ,0,I2C_SMBUS_BYTE, &data))
return -1;
else
return 0x0FF & data.byte;
}
extern s32 i2c_smbus_write_byte(struct i2c_client * client, u8 value)
{
return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
I2C_SMBUS_WRITE,value, I2C_SMBUS_BYTE,NULL);
}
extern s32 i2c_smbus_read_byte_data(struct i2c_client * client, u8 command)
{
union i2c_smbus_data data;
if (i2c_smbus_xfer(client->adapter,client->addr,client->flags,
I2C_SMBUS_READ,command, I2C_SMBUS_BYTE_DATA,&data))
return -1;
else
return 0x0FF & data.byte;
}
extern s32 i2c_smbus_write_byte_data(struct i2c_client * client, u8 command,
u8 value)
{
union i2c_smbus_data data;
data.byte = value;
return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
I2C_SMBUS_WRITE,command,
I2C_SMBUS_BYTE_DATA,&data);
}
extern s32 i2c_smbus_read_word_data(struct i2c_client * client, u8 command)
{
union i2c_smbus_data data;
if (i2c_smbus_xfer(client->adapter,client->addr,client->flags,
I2C_SMBUS_READ,command, I2C_SMBUS_WORD_DATA, &data))
return -1;
else
return 0x0FFFF & data.word;
}
extern s32 i2c_smbus_write_word_data(struct i2c_client * client,
u8 command, u16 value)
{
union i2c_smbus_data data;
data.word = value;
return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
I2C_SMBUS_WRITE,command,
I2C_SMBUS_WORD_DATA,&data);
}
extern s32 i2c_smbus_process_call(struct i2c_client * client,
u8 command, u16 value)
{
union i2c_smbus_data data;
data.word = value;
if (i2c_smbus_xfer(client->adapter,client->addr,client->flags,
I2C_SMBUS_WRITE,command,
I2C_SMBUS_PROC_CALL, &data))
return -1;
else
return 0x0FFFF & data.word;
}
/* Returns the number of read bytes */
extern s32 i2c_smbus_read_block_data(struct i2c_client * client,
u8 command, u8 *values)
{
union i2c_smbus_data data;
int i;
if (i2c_smbus_xfer(client->adapter,client->addr,client->flags,
I2C_SMBUS_READ,command,
I2C_SMBUS_BLOCK_DATA,&data))
return -1;
else {
for (i = 1; i <= data.block[0]; i++)
values[i-1] = data.block[i];
return data.block[0];
}
}
extern s32 i2c_smbus_write_block_data(struct i2c_client * client,
u8 command, u8 length, u8 *values)
{
union i2c_smbus_data data;
int i;
if (length > 32)
length = 32;
for (i = 1; i <= length; i++)
data.block[i] = values[i-1];
data.block[0] = length;
return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
I2C_SMBUS_WRITE,command,
I2C_SMBUS_BLOCK_DATA,&data);
}
extern s32 i2c_smbus_write_i2c_block_data(struct i2c_client * client,
u8 command, u8 length, u8 *values)
{
union i2c_smbus_data data;
int i;
if (length > 32)
length = 32;
for (i = 1; i <= length; i++)
data.block[i] = values[i-1];
data.block[0] = length;
return i2c_smbus_xfer(client->adapter,client->addr,client->flags,
I2C_SMBUS_WRITE,command,
I2C_SMBUS_I2C_BLOCK_DATA,&data);
}
/* Simulate a SMBus command using the i2c protocol
No checking of parameters is done! */
static s32 i2c_smbus_xfer_emulated(struct i2c_adapter * adapter, u16 addr,
unsigned short flags,
char read_write, u8 command, int size,
union i2c_smbus_data * data)
{
/* So we need to generate a series of msgs. In the case of writing, we
need to use only one message; when reading, we need two. We initialize
most things with sane defaults, to keep the code below somewhat
simpler. */
unsigned char msgbuf0[34];
unsigned char msgbuf1[34];
int num = read_write == I2C_SMBUS_READ?2:1;
struct i2c_msg msg[2] = { { addr, flags, 1, msgbuf0 },
{ addr, flags | I2C_M_RD, 0, msgbuf1 }
};
int i;
msgbuf0[0] = command;
switch(size) {
case I2C_SMBUS_QUICK:
msg[0].len = 0;
/* Special case: The read/write field is used as data */
msg[0].flags = flags | (read_write==I2C_SMBUS_READ)?I2C_M_RD:0;
num = 1;
break;
case I2C_SMBUS_BYTE:
if (read_write == I2C_SMBUS_READ) {
/* Special case: only a read! */
msg[0].flags = I2C_M_RD | flags;
num = 1;
}
break;
case I2C_SMBUS_BYTE_DATA:
if (read_write == I2C_SMBUS_READ)
msg[1].len = 1;
else {
msg[0].len = 2;
msgbuf0[1] = data->byte;
}
break;
case I2C_SMBUS_WORD_DATA:
if (read_write == I2C_SMBUS_READ)
msg[1].len = 2;
else {
msg[0].len=3;
msgbuf0[1] = data->word & 0xff;
msgbuf0[2] = (data->word >> 8) & 0xff;
}
break;
case I2C_SMBUS_PROC_CALL:
num = 2; /* Special case */
msg[0].len = 3;
msg[1].len = 2;
msgbuf0[1] = data->word & 0xff;
msgbuf0[2] = (data->word >> 8) & 0xff;
break;
case I2C_SMBUS_BLOCK_DATA:
if (read_write == I2C_SMBUS_READ) {
printk("i2c-core.o: Block read not supported under "
"I2C emulation!\n");
return -1;
} else {
msg[0].len = data->block[0] + 2;
if (msg[0].len > 34) {
printk("i2c-core.o: smbus_access called with "
"invalid block write size (%d)\n",
msg[0].len);
return -1;
}
for (i = 1; i <= msg[0].len; i++)
msgbuf0[i] = data->block[i-1];
}
break;
default:
printk("i2c-core.o: smbus_access called with invalid size (%d)\n",
size);
return -1;
}
if (i2c_transfer(adapter, msg, num) < 0)
return -1;
if (read_write == I2C_SMBUS_READ)
switch(size) {
case I2C_SMBUS_BYTE:
data->byte = msgbuf0[0];
break;
case I2C_SMBUS_BYTE_DATA:
data->byte = msgbuf1[0];
break;
case I2C_SMBUS_WORD_DATA:
case I2C_SMBUS_PROC_CALL:
data->word = msgbuf1[0] | (msgbuf1[1] << 8);
break;
}
return 0;
}
s32 i2c_smbus_xfer(struct i2c_adapter * adapter, u16 addr, unsigned short flags,
char read_write, u8 command, int size,
union i2c_smbus_data * data)
{
s32 res;
flags = flags & I2C_M_TEN;
if (adapter->algo->smbus_xfer) {
I2C_LOCK(adapter);
res = adapter->algo->smbus_xfer(adapter,addr,flags,read_write,
command,size,data);
I2C_UNLOCK(adapter);
} else
res = i2c_smbus_xfer_emulated(adapter,addr,flags,read_write,
command,size,data);
return res;
}
/* You should always define `functionality'; the 'else' is just for
backward compatibility. */
u32 i2c_get_functionality (struct i2c_adapter *adap)
{
if (adap->algo->functionality)
return adap->algo->functionality(adap);
else
return 0xffffffff;
}
int i2c_check_functionality (struct i2c_adapter *adap, u32 func)
{
u32 adap_func = i2c_get_functionality (adap);
return (func & adap_func) == func;
}
static int __init i2c_init(void)
{
printk("i2c-core.o: i2c core module\n");
memset(adapters,0,sizeof(adapters));
memset(drivers,0,sizeof(drivers));
adap_count=0;
driver_count=0;
init_MUTEX(&adap_lock);
init_MUTEX(&driver_lock);
i2cproc_init();
return 0;
}
#ifndef MODULE
#ifdef CONFIG_I2C_CHARDEV
extern int i2c_dev_init(void);
#endif
#ifdef CONFIG_I2C_ALGOBIT
extern int i2c_algo_bit_init(void);
#endif
#ifdef CONFIG_I2C_PHILIPSPAR
extern int i2c_bitlp_init(void);
#endif
#ifdef CONFIG_I2C_ELV
extern int i2c_bitelv_init(void);
#endif
#ifdef CONFIG_I2C_VELLEMAN
extern int i2c_bitvelle_init(void);
#endif
#ifdef CONFIG_I2C_BITVIA
extern int i2c_bitvia_init(void);
#endif
#ifdef CONFIG_I2C_ALGOPCF
extern int i2c_algo_pcf_init(void);
#endif
#ifdef CONFIG_I2C_ELEKTOR
extern int i2c_pcfisa_init(void);
#endif
#ifdef CONFIG_I2C_ALGO8XX
extern int i2c_algo_8xx_init(void);
#endif
#ifdef CONFIG_I2C_RPXLITE
extern int i2c_rpx_init(void);
#endif
#ifdef CONFIG_I2C_PROC
extern int sensors_init(void);
#endif
/* This is needed for automatic patch generation: sensors code starts here */
/* This is needed for automatic patch generation: sensors code ends here */
int __init i2c_init_all(void)
{
/* --------------------- global ----- */
i2c_init();
#ifdef CONFIG_I2C_CHARDEV
i2c_dev_init();
#endif
/* --------------------- bit -------- */
#ifdef CONFIG_I2C_ALGOBIT
i2c_algo_bit_init();
#endif
#ifdef CONFIG_I2C_PHILIPSPAR
i2c_bitlp_init();
#endif
#ifdef CONFIG_I2C_ELV
i2c_bitelv_init();
#endif
#ifdef CONFIG_I2C_VELLEMAN
i2c_bitvelle_init();
#endif
/* --------------------- pcf -------- */
#ifdef CONFIG_I2C_ALGOPCF
i2c_algo_pcf_init();
#endif
#ifdef CONFIG_I2C_ELEKTOR
i2c_pcfisa_init();
#endif
/* --------------------- 8xx -------- */
#ifdef CONFIG_I2C_ALGO8XX
i2c_algo_8xx_init();
#endif
#ifdef CONFIG_I2C_RPXLITE
i2c_rpx_init();
#endif
/* -------------- proc interface ---- */
#ifdef CONFIG_I2C_PROC
sensors_init();
#endif
/* This is needed for automatic patch generation: sensors code starts here */
/* This is needed for automatic patch generation: sensors code ends here */
return 0;
}
#endif
EXPORT_SYMBOL(i2c_add_adapter);
EXPORT_SYMBOL(i2c_del_adapter);
EXPORT_SYMBOL(i2c_add_driver);
EXPORT_SYMBOL(i2c_del_driver);
EXPORT_SYMBOL(i2c_attach_client);
EXPORT_SYMBOL(i2c_detach_client);
EXPORT_SYMBOL(i2c_inc_use_client);
EXPORT_SYMBOL(i2c_dec_use_client);
EXPORT_SYMBOL(i2c_get_client);
EXPORT_SYMBOL(i2c_use_client);
EXPORT_SYMBOL(i2c_release_client);
EXPORT_SYMBOL(i2c_check_addr);
EXPORT_SYMBOL(i2c_master_send);
EXPORT_SYMBOL(i2c_master_recv);
EXPORT_SYMBOL(i2c_control);
EXPORT_SYMBOL(i2c_transfer);
EXPORT_SYMBOL(i2c_adapter_id);
EXPORT_SYMBOL(i2c_probe);
EXPORT_SYMBOL(i2c_smbus_xfer);
EXPORT_SYMBOL(i2c_smbus_write_quick);
EXPORT_SYMBOL(i2c_smbus_read_byte);
EXPORT_SYMBOL(i2c_smbus_write_byte);
EXPORT_SYMBOL(i2c_smbus_read_byte_data);
EXPORT_SYMBOL(i2c_smbus_write_byte_data);
EXPORT_SYMBOL(i2c_smbus_read_word_data);
EXPORT_SYMBOL(i2c_smbus_write_word_data);
EXPORT_SYMBOL(i2c_smbus_process_call);
EXPORT_SYMBOL(i2c_smbus_read_block_data);
EXPORT_SYMBOL(i2c_smbus_write_block_data);
EXPORT_SYMBOL(i2c_get_functionality);
EXPORT_SYMBOL(i2c_check_functionality);
#ifdef MODULE
MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
MODULE_DESCRIPTION("I2C-Bus main module");
MODULE_PARM(i2c_debug, "i");
MODULE_PARM_DESC(i2c_debug,"debug level");
MODULE_LICENSE("GPL");
int init_module(void)
{
return i2c_init();
}
void cleanup_module(void)
{
i2cproc_cleanup();
}
#endif
|