Viewing file:  cpqphp_core.c (36.9 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* Compaq Hot Plug Controller Driver
*
* Copyright (c) 1995,2001 Compaq Computer Corporation
* Copyright (c) 2001 Greg Kroah-Hartman (greg@kroah.com)
* Copyright (c) 2001 IBM Corp.
*
* All rights reserved.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or (at
* your option) any later version.
*
* This program is distributed in the hope that it will be useful, but
* WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
* NON INFRINGEMENT. See the GNU General Public License for more
* details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
*
* Send feedback to <greg@kroah.com>
*
*/
#include <linux/config.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/proc_fs.h>
#include <linux/miscdevice.h>
#include <linux/slab.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <asm/uaccess.h>
#include "cpqphp.h"
#include "cpqphp_nvram.h"
#include "../../arch/i386/kernel/pci-i386.h" /* horrible hack showing how processor dependant we are... */
/* Global variables */
int cpqhp_debug;
struct controller *cpqhp_ctrl_list; /* = NULL */
struct pci_func *cpqhp_slot_list[256];
/* local variables */
static void *smbios_table;
static void *smbios_start;
static void *cpqhp_rom_start;
static u8 power_mode;
static int debug;
#define DRIVER_VERSION "0.9.6"
#define DRIVER_AUTHOR "Dan Zink <dan.zink@compaq.com>, Greg Kroah-Hartman <greg@kroah.com>"
#define DRIVER_DESC "Compaq Hot Plug PCI Controller Driver"
MODULE_AUTHOR(DRIVER_AUTHOR);
MODULE_DESCRIPTION(DRIVER_DESC);
MODULE_LICENSE("GPL");
MODULE_PARM(power_mode, "b");
MODULE_PARM_DESC(power_mode, "Power mode enabled or not");
MODULE_PARM(debug, "i");
MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
#define CPQHPC_MODULE_MINOR 208
static int one_time_init (void);
static int set_attention_status (struct hotplug_slot *slot, u8 value);
static int process_SI (struct hotplug_slot *slot);
static int process_SS (struct hotplug_slot *slot);
static int hardware_test (struct hotplug_slot *slot, u32 value);
static int get_power_status (struct hotplug_slot *slot, u8 *value);
static int get_attention_status (struct hotplug_slot *slot, u8 *value);
static int get_latch_status (struct hotplug_slot *slot, u8 *value);
static int get_adapter_status (struct hotplug_slot *slot, u8 *value);
static struct hotplug_slot_ops cpqphp_hotplug_slot_ops = {
owner: THIS_MODULE,
set_attention_status: set_attention_status,
enable_slot: process_SI,
disable_slot: process_SS,
hardware_test: hardware_test,
get_power_status: get_power_status,
get_attention_status: get_attention_status,
get_latch_status: get_latch_status,
get_adapter_status: get_adapter_status,
};
static inline int is_slot64bit (struct slot *slot)
{
if (!slot || !slot->p_sm_slot)
return 0;
if (readb(slot->p_sm_slot + SMBIOS_SLOT_WIDTH) == 0x06)
return 1;
return 0;
}
static inline int is_slot66mhz (struct slot *slot)
{
if (!slot || !slot->p_sm_slot)
return 0;
if (readb(slot->p_sm_slot + SMBIOS_SLOT_TYPE) == 0x0E)
return 1;
return 0;
}
/**
* detect_SMBIOS_pointer - find the system Management BIOS Table in the specified region of memory.
*
* @begin: begin pointer for region to be scanned.
* @end: end pointer for region to be scanned.
*
* Returns pointer to the head of the SMBIOS tables (or NULL)
*
*/
static void * detect_SMBIOS_pointer(void *begin, void *end)
{
void *fp;
void *endp;
u8 temp1, temp2, temp3, temp4;
int status = 0;
endp = (end - sizeof(u32) + 1);
for (fp = begin; fp <= endp; fp += 16) {
temp1 = readb(fp);
temp2 = readb(fp+1);
temp3 = readb(fp+2);
temp4 = readb(fp+3);
if (temp1 == '_' &&
temp2 == 'S' &&
temp3 == 'M' &&
temp4 == '_') {
status = 1;
break;
}
}
if (!status)
fp = NULL;
dbg("Discovered SMBIOS Entry point at %p\n", fp);
return fp;
}
/**
* init_SERR - Initializes the per slot SERR generation.
*
* For unexpected switch opens
*
*/
static int init_SERR(struct controller * ctrl)
{
u32 tempdword;
u32 number_of_slots;
u8 physical_slot;
if (!ctrl)
return 1;
tempdword = ctrl->first_slot;
number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
// Loop through slots
while (number_of_slots) {
physical_slot = tempdword;
writeb(0, ctrl->hpc_reg + SLOT_SERR);
tempdword++;
number_of_slots--;
}
return 0;
}
/* nice debugging output */
static int pci_print_IRQ_route (void)
{
struct irq_routing_table *routing_table;
int len;
int loop;
u8 tbus, tdevice, tslot;
routing_table = pcibios_get_irq_routing_table();
if (routing_table == NULL) {
err("No BIOS Routing Table??? Not good\n");
return -ENOMEM;
}
len = (routing_table->size - sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
// Make sure I got at least one entry
if (len == 0) {
kfree(routing_table);
return -1;
}
dbg("bus dev func slot\n");
for (loop = 0; loop < len; ++loop) {
tbus = routing_table->slots[loop].bus;
tdevice = routing_table->slots[loop].devfn;
tslot = routing_table->slots[loop].slot;
dbg("%d %d %d %d\n", tbus, tdevice >> 3, tdevice & 0x7, tslot);
}
kfree(routing_table);
return 0;
}
/*
* get_subsequent_smbios_entry
*
* Gets the first entry if previous == NULL
* Otherwise, returns the next entry
* Uses global SMBIOS Table pointer
*
* @curr: %NULL or pointer to previously returned structure
*
* returns a pointer to an SMBIOS structure or NULL if none found
*/
static void * get_subsequent_smbios_entry(void *smbios_start, void *smbios_table, void *curr)
{
u8 bail = 0;
u8 previous_byte = 1;
void *p_temp;
void *p_max;
if (!smbios_table || !curr)
return(NULL);
// set p_max to the end of the table
p_max = smbios_start + readw(smbios_table + ST_LENGTH);
p_temp = curr;
p_temp += readb(curr + SMBIOS_GENERIC_LENGTH);
while ((p_temp < p_max) && !bail) {
// Look for the double NULL terminator
// The first condition is the previous byte and the second is the curr
if (!previous_byte && !(readb(p_temp))) {
bail = 1;
}
previous_byte = readb(p_temp);
p_temp++;
}
if (p_temp < p_max) {
return p_temp;
} else {
return NULL;
}
}
/**
* get_SMBIOS_entry
*
* @type:SMBIOS structure type to be returned
* @previous: %NULL or pointer to previously returned structure
*
* Gets the first entry of the specified type if previous == NULL
* Otherwise, returns the next entry of the given type.
* Uses global SMBIOS Table pointer
* Uses get_subsequent_smbios_entry
*
* returns a pointer to an SMBIOS structure or %NULL if none found
*/
static void *get_SMBIOS_entry (void *smbios_start, void *smbios_table, u8 type, void * previous)
{
if (!smbios_table)
return NULL;
if (!previous) {
previous = smbios_start;
} else {
previous = get_subsequent_smbios_entry(smbios_start, smbios_table, previous);
}
while (previous) {
if (readb(previous + SMBIOS_GENERIC_TYPE) != type) {
previous = get_subsequent_smbios_entry(smbios_start, smbios_table, previous);
} else {
break;
}
}
return previous;
}
static int ctrl_slot_setup (struct controller * ctrl, void *smbios_start, void *smbios_table)
{
struct slot *new_slot;
u8 number_of_slots;
u8 slot_device;
u8 slot_number;
u8 ctrl_slot;
u32 tempdword;
void *slot_entry= NULL;
int result;
dbg(__FUNCTION__"\n");
tempdword = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
number_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
slot_device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
slot_number = ctrl->first_slot;
while (number_of_slots) {
new_slot = (struct slot *) kmalloc(sizeof(struct slot), GFP_KERNEL);
if (!new_slot)
return -ENOMEM;
memset(new_slot, 0, sizeof(struct slot));
new_slot->hotplug_slot = kmalloc (sizeof (struct hotplug_slot), GFP_KERNEL);
if (!new_slot->hotplug_slot) {
kfree (new_slot);
return -ENOMEM;
}
memset(new_slot->hotplug_slot, 0, sizeof (struct hotplug_slot));
new_slot->hotplug_slot->info = kmalloc (sizeof (struct hotplug_slot_info), GFP_KERNEL);
if (!new_slot->hotplug_slot->info) {
kfree (new_slot->hotplug_slot);
kfree (new_slot);
return -ENOMEM;
}
memset(new_slot->hotplug_slot->info, 0, sizeof (struct hotplug_slot_info));
new_slot->hotplug_slot->name = kmalloc (SLOT_NAME_SIZE, GFP_KERNEL);
if (!new_slot->hotplug_slot->name) {
kfree (new_slot->hotplug_slot->info);
kfree (new_slot->hotplug_slot);
kfree (new_slot);
return -ENOMEM;
}
new_slot->magic = SLOT_MAGIC;
new_slot->ctrl = ctrl;
new_slot->bus = ctrl->bus;
new_slot->device = slot_device;
new_slot->number = slot_number;
dbg("slot->number = %d\n",new_slot->number);
slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9, slot_entry);
while (slot_entry && (readw(slot_entry + SMBIOS_SLOT_NUMBER) != new_slot->number)) {
slot_entry = get_SMBIOS_entry(smbios_start, smbios_table, 9, slot_entry);
}
new_slot->p_sm_slot = slot_entry;
init_timer(&new_slot->task_event);
new_slot->task_event.expires = jiffies + 5 * HZ;
new_slot->task_event.function = cpqhp_pushbutton_thread;
//FIXME: these capabilities aren't used but if they are
// they need to be correctly implemented
new_slot->capabilities |= PCISLOT_REPLACE_SUPPORTED;
new_slot->capabilities |= PCISLOT_INTERLOCK_SUPPORTED;
if (is_slot64bit(new_slot))
new_slot->capabilities |= PCISLOT_64_BIT_SUPPORTED;
if (is_slot66mhz(new_slot))
new_slot->capabilities |= PCISLOT_66_MHZ_SUPPORTED;
if (ctrl->speed == 1)
new_slot->capabilities |= PCISLOT_66_MHZ_OPERATION;
ctrl_slot = slot_device - (readb(ctrl->hpc_reg + SLOT_MASK) >> 4);
// Check presence
new_slot->capabilities |= ((((~tempdword) >> 23) | ((~tempdword) >> 15)) >> ctrl_slot) & 0x02;
// Check the switch state
new_slot->capabilities |= ((~tempdword & 0xFF) >> ctrl_slot) & 0x01;
// Check the slot enable
new_slot->capabilities |= ((read_slot_enable(ctrl) << 2) >> ctrl_slot) & 0x04;
/* register this slot with the hotplug pci core */
new_slot->hotplug_slot->private = new_slot;
make_slot_name (new_slot->hotplug_slot->name, SLOT_NAME_SIZE, new_slot);
new_slot->hotplug_slot->ops = &cpqphp_hotplug_slot_ops;
new_slot->hotplug_slot->info->power_status = get_slot_enabled(ctrl, new_slot);
new_slot->hotplug_slot->info->attention_status = cpq_get_attention_status(ctrl, new_slot);
new_slot->hotplug_slot->info->latch_status = cpq_get_latch_status(ctrl, new_slot);
new_slot->hotplug_slot->info->adapter_status = get_presence_status(ctrl, new_slot);
dbg ("registering bus %d, dev %d, number %d, ctrl->slot_device_offset %d, slot %d\n",
new_slot->bus, new_slot->device, new_slot->number, ctrl->slot_device_offset, slot_number);
result = pci_hp_register (new_slot->hotplug_slot);
if (result) {
err ("pci_hp_register failed with error %d\n", result);
kfree (new_slot->hotplug_slot->info);
kfree (new_slot->hotplug_slot->name);
kfree (new_slot->hotplug_slot);
kfree (new_slot);
return result;
}
new_slot->next = ctrl->slot;
ctrl->slot = new_slot;
number_of_slots--;
slot_device++;
slot_number++;
}
return(0);
}
static int ctrl_slot_cleanup (struct controller * ctrl)
{
struct slot *old_slot, *next_slot;
old_slot = ctrl->slot;
ctrl->slot = NULL;
while (old_slot) {
next_slot = old_slot->next;
pci_hp_deregister (old_slot->hotplug_slot);
kfree(old_slot->hotplug_slot->info);
kfree(old_slot->hotplug_slot->name);
kfree(old_slot->hotplug_slot);
kfree(old_slot);
old_slot = next_slot;
}
//Free IRQ associated with hot plug device
free_irq(ctrl->interrupt, ctrl);
//Unmap the memory
iounmap(ctrl->hpc_reg);
//Finally reclaim PCI mem
release_mem_region(pci_resource_start(ctrl->pci_dev, 0),
pci_resource_len(ctrl->pci_dev, 0));
return(0);
}
//============================================================================
// function: get_slot_mapping
//
// Description: Attempts to determine a logical slot mapping for a PCI
// device. Won't work for more than one PCI-PCI bridge
// in a slot.
//
// Input: u8 bus_num - bus number of PCI device
// u8 dev_num - device number of PCI device
// u8 *slot - Pointer to u8 where slot number will
// be returned
//
// Output: SUCCESS or FAILURE
//=============================================================================
static int get_slot_mapping (struct pci_ops *ops, u8 bus_num, u8 dev_num, u8 *slot)
{
struct irq_routing_table *PCIIRQRoutingInfoLength;
u32 work;
long len;
long loop;
u8 tbus, tdevice, tslot, bridgeSlot;
dbg(__FUNCTION__" %p, %d, %d, %p\n", ops, bus_num, dev_num, slot);
bridgeSlot = 0xFF;
PCIIRQRoutingInfoLength = pcibios_get_irq_routing_table();
len = (PCIIRQRoutingInfoLength->size -
sizeof(struct irq_routing_table)) / sizeof(struct irq_info);
// Make sure I got at least one entry
if (len == 0) {
if (PCIIRQRoutingInfoLength != NULL) kfree(PCIIRQRoutingInfoLength );
return -1;
}
for (loop = 0; loop < len; ++loop) {
tbus = PCIIRQRoutingInfoLength->slots[loop].bus;
tdevice = PCIIRQRoutingInfoLength->slots[loop].devfn >> 3;
tslot = PCIIRQRoutingInfoLength->slots[loop].slot;
if ((tbus == bus_num) && (tdevice == dev_num)) {
*slot = tslot;
if (PCIIRQRoutingInfoLength != NULL) kfree(PCIIRQRoutingInfoLength );
return 0;
} else {
// Didn't get a match on the target PCI device. Check if the
// current IRQ table entry is a PCI-to-PCI bridge device. If so,
// and it's secondary bus matches the bus number for the target
// device, I need to save the bridge's slot number. If I can't
// find an entry for the target device, I will have to assume it's
// on the other side of the bridge, and assign it the bridge's slot.
pci_read_config_dword_nodev (ops, tbus, tdevice, 0, PCI_REVISION_ID, &work);
if ((work >> 8) == PCI_TO_PCI_BRIDGE_CLASS) {
pci_read_config_dword_nodev (ops, tbus, tdevice, 0, PCI_PRIMARY_BUS, &work);
// See if bridge's secondary bus matches target bus.
if (((work >> 8) & 0x000000FF) == (long) bus_num) {
bridgeSlot = tslot;
}
}
}
}
// If we got here, we didn't find an entry in the IRQ mapping table
// for the target PCI device. If we did determine that the target
// device is on the other side of a PCI-to-PCI bridge, return the
// slot number for the bridge.
if (bridgeSlot != 0xFF) {
*slot = bridgeSlot;
if (PCIIRQRoutingInfoLength != NULL) kfree(PCIIRQRoutingInfoLength );
return 0;
}
if (PCIIRQRoutingInfoLength != NULL) kfree(PCIIRQRoutingInfoLength );
// Couldn't find an entry in the routing table for this PCI device
return -1;
}
/**
* cpqhp_set_attention_status - Turns the Amber LED for a slot on or off
*
*/
static int cpqhp_set_attention_status (struct controller *ctrl, struct pci_func *func, u32 status)
{
u8 hp_slot;
hp_slot = func->device - ctrl->slot_device_offset;
if (func == NULL)
return(1);
// Wait for exclusive access to hardware
down(&ctrl->crit_sect);
if (status == 1) {
amber_LED_on (ctrl, hp_slot);
} else if (status == 0) {
amber_LED_off (ctrl, hp_slot);
} else {
// Done with exclusive hardware access
up(&ctrl->crit_sect);
return(1);
}
set_SOGO(ctrl);
// Wait for SOBS to be unset
wait_for_ctrl_irq (ctrl);
// Done with exclusive hardware access
up(&ctrl->crit_sect);
return(0);
}
/**
* set_attention_status - Turns the Amber LED for a slot on or off
*
*/
static int set_attention_status (struct hotplug_slot *hotplug_slot, u8 status)
{
struct pci_func *slot_func;
struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
struct controller *ctrl;
u8 bus;
u8 devfn;
u8 device;
u8 function;
if (slot == NULL)
return -ENODEV;
dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
ctrl = slot->ctrl;
if (ctrl == NULL)
return -ENODEV;
if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1)
return -ENODEV;
device = devfn >> 3;
function = devfn & 0x7;
dbg("bus, dev, fn = %d, %d, %d\n", bus, device, function);
slot_func = cpqhp_slot_find(bus, device, function);
if (!slot_func) {
return -ENODEV;
}
return cpqhp_set_attention_status(ctrl, slot_func, status);
}
static int process_SI (struct hotplug_slot *hotplug_slot)
{
struct pci_func *slot_func;
struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
struct controller *ctrl;
u8 bus;
u8 devfn;
u8 device;
u8 function;
if (slot == NULL)
return -ENODEV;
dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
ctrl = slot->ctrl;
if (ctrl == NULL)
return -ENODEV;
if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1)
return -ENODEV;
device = devfn >> 3;
function = devfn & 0x7;
dbg("bus, dev, fn = %d, %d, %d\n", bus, device, function);
slot_func = cpqhp_slot_find(bus, device, function);
if (!slot_func) {
return -ENODEV;
}
slot_func->bus = bus;
slot_func->device = device;
slot_func->function = function;
slot_func->configured = 0;
dbg("board_added(%p, %p)\n", slot_func, ctrl);
return cpqhp_process_SI(ctrl, slot_func);
}
static int process_SS (struct hotplug_slot *hotplug_slot)
{
struct pci_func *slot_func;
struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
struct controller *ctrl;
u8 bus;
u8 devfn;
u8 device;
u8 function;
if (slot == NULL)
return -ENODEV;
dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
ctrl = slot->ctrl;
if (ctrl == NULL)
return -ENODEV;
if (cpqhp_get_bus_dev(ctrl, &bus, &devfn, slot->number) == -1)
return -ENODEV;
device = devfn >> 3;
function = devfn & 0x7;
dbg("bus, dev, fn = %d, %d, %d\n", bus, device, function);
slot_func = cpqhp_slot_find(bus, device, function);
if (!slot_func) {
return -ENODEV;
}
dbg("In power_down_board, slot_func = %p, ctrl = %p\n", slot_func, ctrl);
return cpqhp_process_SS(ctrl, slot_func);
}
static int hardware_test (struct hotplug_slot *hotplug_slot, u32 value)
{
struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
struct controller *ctrl;
dbg(__FUNCTION__"\n");
if (slot == NULL)
return -ENODEV;
ctrl = slot->ctrl;
if (ctrl == NULL)
return -ENODEV;
return cpqhp_hardware_test (ctrl, value);
}
static int get_power_status (struct hotplug_slot *hotplug_slot, u8 *value)
{
struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
struct controller *ctrl;
if (slot == NULL)
return -ENODEV;
dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
ctrl = slot->ctrl;
if (ctrl == NULL)
return -ENODEV;
*value = get_slot_enabled(ctrl, slot);
return 0;
}
static int get_attention_status (struct hotplug_slot *hotplug_slot, u8 *value)
{
struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
struct controller *ctrl;
if (slot == NULL)
return -ENODEV;
dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
ctrl = slot->ctrl;
if (ctrl == NULL)
return -ENODEV;
*value = cpq_get_attention_status(ctrl, slot);
return 0;
}
static int get_latch_status (struct hotplug_slot *hotplug_slot, u8 *value)
{
struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
struct controller *ctrl;
if (slot == NULL)
return -ENODEV;
dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
ctrl = slot->ctrl;
if (ctrl == NULL)
return -ENODEV;
*value = cpq_get_latch_status (ctrl, slot);
return 0;
}
static int get_adapter_status (struct hotplug_slot *hotplug_slot, u8 *value)
{
struct slot *slot = get_slot (hotplug_slot, __FUNCTION__);
struct controller *ctrl;
if (slot == NULL)
return -ENODEV;
dbg(__FUNCTION__" - physical_slot = %s\n", hotplug_slot->name);
ctrl = slot->ctrl;
if (ctrl == NULL)
return -ENODEV;
*value = get_presence_status (ctrl, slot);
return 0;
}
static int cpqhpc_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
{
u8 num_of_slots = 0;
u8 hp_slot = 0;
u8 device;
u8 rev;
u16 temp_word;
u16 vendor_id;
u16 subsystem_vid;
u16 subsystem_deviceid;
u32 rc;
struct controller *ctrl;
struct pci_func *func;
// Need to read VID early b/c it's used to differentiate CPQ and INTC discovery
rc = pci_read_config_word(pdev, PCI_VENDOR_ID, &vendor_id);
if (rc || ((vendor_id != PCI_VENDOR_ID_COMPAQ) && (vendor_id != PCI_VENDOR_ID_INTEL))) {
err(msg_HPC_non_compaq_or_intel);
return -ENODEV;
}
dbg("Vendor ID: %x\n", vendor_id);
rc = pci_read_config_byte(pdev, PCI_REVISION_ID, &rev);
dbg("revision: %d\n", rev);
if (rc || ((vendor_id == PCI_VENDOR_ID_COMPAQ) && (!rev))) {
err(msg_HPC_rev_error);
return -ENODEV;
}
/* Check for the proper subsytem ID's
* Intel uses a different SSID programming model than Compaq.
* For Intel, each SSID bit identifies a PHP capability.
* Also Intel HPC's may have RID=0.
*/
if ((rev > 2) || (vendor_id == PCI_VENDOR_ID_INTEL)) {
// TODO: This code can be made to support non-Compaq or Intel subsystem IDs
rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &subsystem_vid);
if (rc) {
err(__FUNCTION__" : pci_read_config_word failed\n");
return rc;
}
dbg("Subsystem Vendor ID: %x\n", subsystem_vid);
if ((subsystem_vid != PCI_VENDOR_ID_COMPAQ) && (subsystem_vid != PCI_VENDOR_ID_INTEL)) {
err(msg_HPC_non_compaq_or_intel);
return -ENODEV;
}
ctrl = (struct controller *) kmalloc(sizeof(struct controller), GFP_KERNEL);
if (!ctrl) {
err(__FUNCTION__" : out of memory\n");
return -ENOMEM;
}
memset(ctrl, 0, sizeof(struct controller));
rc = pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &subsystem_deviceid);
if (rc) {
err(__FUNCTION__" : pci_read_config_word failed\n");
goto err_free_ctrl;
}
info("Hot Plug Subsystem Device ID: %x\n", subsystem_deviceid);
/* Set Vendor ID, so it can be accessed later from other functions */
ctrl->vendor_id = vendor_id;
switch (subsystem_vid) {
case PCI_VENDOR_ID_COMPAQ:
switch (subsystem_deviceid) {
case PCI_SUB_HPC_ID:
/* Original 6500/7000 implementation */
ctrl->slot_switch_type = 1; // Switch is present
ctrl->speed_capability = CTRL_SPEED_33MHz;
ctrl->push_button = 0; // No pushbutton
ctrl->pci_config_space = 1; // Index/data access to working registers 0 = not supported, 1 = supported
ctrl->defeature_PHP = 1; // PHP is supported
ctrl->pcix_support = 0; // PCI-X not supported
ctrl->pcix_speed_capability = 0; // N/A since PCI-X not supported
break;
case PCI_SUB_HPC_ID2:
/* First Pushbutton implementation */
ctrl->push_flag = 1;
ctrl->slot_switch_type = 1; // Switch is present
ctrl->speed_capability = CTRL_SPEED_33MHz;
ctrl->push_button = 1; // Pushbutton is present
ctrl->pci_config_space = 1; // Index/data access to working registers 0 = not supported, 1 = supported
ctrl->defeature_PHP = 1; // PHP is supported
ctrl->pcix_support = 0; // PCI-X not supported
ctrl->pcix_speed_capability = 0; // N/A since PCI-X not supported
break;
case PCI_SUB_HPC_ID_INTC:
/* Third party (6500/7000) */
ctrl->slot_switch_type = 1; // Switch is present
ctrl->speed_capability = CTRL_SPEED_33MHz;
ctrl->push_button = 0; // No pushbutton
ctrl->pci_config_space = 1; // Index/data access to working registers 0 = not supported, 1 = supported
ctrl->defeature_PHP = 1; // PHP is supported
ctrl->pcix_support = 0; // PCI-X not supported
ctrl->pcix_speed_capability = 0; // N/A since PCI-X not supported
break;
case PCI_SUB_HPC_ID3:
/* First 66 Mhz implementation */
ctrl->push_flag = 1;
ctrl->slot_switch_type = 1; // Switch is present
ctrl->speed_capability = CTRL_SPEED_66MHz;
ctrl->push_button = 1; // Pushbutton is present
ctrl->pci_config_space = 1; // Index/data access to working registers 0 = not supported, 1 = supported
ctrl->defeature_PHP = 1; // PHP is supported
ctrl->pcix_support = 0; // PCI-X not supported
ctrl->pcix_speed_capability = 0; // N/A since PCI-X not supported
break;
default:
// TODO: Add SSIDs for CPQ systems that support PCI-X
err(msg_HPC_not_supported);
rc = -ENODEV;
goto err_free_ctrl;
}
break;
case PCI_VENDOR_ID_INTEL:
/* Check for speed capability (0=33, 1=66) */
if (subsystem_deviceid & 0x0001) {
ctrl->speed_capability = CTRL_SPEED_66MHz;
} else {
ctrl->speed_capability = CTRL_SPEED_33MHz;
}
/* Check for push button */
if (subsystem_deviceid & 0x0002) {
/* no push button */
ctrl->push_button = 0;
} else {
/* push button supported */
ctrl->push_button = 1;
}
/* Check for slot switch type (0=mechanical, 1=not mechanical) */
if (subsystem_deviceid & 0x0004) {
/* no switch */
ctrl->slot_switch_type = 0;
} else {
/* switch */
ctrl->slot_switch_type = 1;
}
/* PHP Status (0=De-feature PHP, 1=Normal operation) */
if (subsystem_deviceid & 0x0008) {
ctrl->defeature_PHP = 1; // PHP supported
} else {
ctrl->defeature_PHP = 0; // PHP not supported
}
/* Alternate Base Address Register Interface (0=not supported, 1=supported) */
if (subsystem_deviceid & 0x0010) {
ctrl->alternate_base_address = 1; // supported
} else {
ctrl->alternate_base_address = 0; // not supported
}
/* PCI Config Space Index (0=not supported, 1=supported) */
if (subsystem_deviceid & 0x0020) {
ctrl->pci_config_space = 1; // supported
} else {
ctrl->pci_config_space = 0; // not supported
}
/* PCI-X support */
if (subsystem_deviceid & 0x0080) {
/* PCI-X capable */
ctrl->pcix_support = 1;
/* Frequency of operation in PCI-X mode */
if (subsystem_deviceid & 0x0040) {
/* 133MHz PCI-X if bit 7 is 1 */
ctrl->pcix_speed_capability = 1;
} else {
/* 100MHz PCI-X if bit 7 is 1 and bit 0 is 0, */
/* 66MHz PCI-X if bit 7 is 1 and bit 0 is 1 */
ctrl->pcix_speed_capability = 0;
}
} else {
/* Conventional PCI */
ctrl->pcix_support = 0;
ctrl->pcix_speed_capability = 0;
}
break;
default:
err(msg_HPC_not_supported);
rc = -ENODEV;
goto err_free_ctrl;
}
} else {
err(msg_HPC_not_supported);
return -ENODEV;
}
// Tell the user that we found one.
info("Initializing the PCI hot plug controller residing on PCI bus %d\n", pdev->bus->number);
dbg ("Hotplug controller capabilities:\n");
dbg (" speed_capability %s\n", ctrl->speed_capability == CTRL_SPEED_33MHz ? "33MHz" : "66Mhz");
dbg (" slot_switch_type %s\n", ctrl->slot_switch_type == 0 ? "no switch" : "switch present");
dbg (" defeature_PHP %s\n", ctrl->defeature_PHP == 0 ? "PHP not supported" : "PHP supported");
dbg (" alternate_base_address %s\n", ctrl->alternate_base_address == 0 ? "not supported" : "supported");
dbg (" pci_config_space %s\n", ctrl->pci_config_space == 0 ? "not supported" : "supported");
dbg (" pcix_speed_capability %s\n", ctrl->pcix_speed_capability == 0 ? "not supported" : "supported");
dbg (" pcix_support %s\n", ctrl->pcix_support == 0 ? "not supported" : "supported");
ctrl->pci_dev = pdev;
ctrl->pci_ops = pdev->bus->ops;
ctrl->bus = pdev->bus->number;
ctrl->device = PCI_SLOT(pdev->devfn);
ctrl->function = PCI_FUNC(pdev->devfn);
ctrl->rev = rev;
dbg("bus device function rev: %d %d %d %d\n", ctrl->bus, ctrl->device, ctrl->function, ctrl->rev);
init_MUTEX(&ctrl->crit_sect);
init_waitqueue_head(&ctrl->queue);
/* initialize our threads if they haven't already been started up */
rc = one_time_init();
if (rc) {
goto err_free_ctrl;
}
dbg("pdev = %p\n", pdev);
dbg("pci resource start %lx\n", pci_resource_start(pdev, 0));
dbg("pci resource len %lx\n", pci_resource_len(pdev, 0));
if (!request_mem_region(pci_resource_start(pdev, 0),
pci_resource_len(pdev, 0), MY_NAME)) {
err("cannot reserve MMIO region\n");
rc = -ENOMEM;
goto err_free_ctrl;
}
ctrl->hpc_reg = ioremap(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
if (!ctrl->hpc_reg) {
err("cannot remap MMIO region %lx @ %lx\n", pci_resource_len(pdev, 0), pci_resource_start(pdev, 0));
rc = -ENODEV;
goto err_free_mem_region;
}
// Check for 66Mhz operation
// TODO: Add PCI-X support
ctrl->speed = get_controller_speed(ctrl);
//**************************************************
//
// Save configuration headers for this and
// subordinate PCI buses
//
//**************************************************
// find the physical slot number of the first hot plug slot
// Get slot won't work for devices behind bridges, but
// in this case it will always be called for the "base"
// bus/dev/func of a slot.
// CS: this is leveraging the PCIIRQ routing code from the kernel (pci-pc.c: get_irq_routing_table)
rc = get_slot_mapping(ctrl->pci_ops, pdev->bus->number, (readb(ctrl->hpc_reg + SLOT_MASK) >> 4), &(ctrl->first_slot));
dbg("get_slot_mapping: first_slot = %d, returned = %d\n", ctrl->first_slot, rc);
if (rc) {
err(msg_initialization_err, rc);
goto err_iounmap;
}
// Store PCI Config Space for all devices on this bus
rc = cpqhp_save_config(ctrl, ctrl->bus, readb(ctrl->hpc_reg + SLOT_MASK));
if (rc) {
err(__FUNCTION__": unable to save PCI configuration data, error %d\n", rc);
goto err_iounmap;
}
/*
* Get IO, memory, and IRQ resources for new devices
*/
rc = cpqhp_find_available_resources(ctrl, cpqhp_rom_start);
ctrl->add_support = !rc;
if (rc) {
dbg("cpqhp_find_available_resources = 0x%x\n", rc);
err("unable to locate PCI configuration resources for hot plug add.\n");
goto err_iounmap;
}
/*
* Finish setting up the hot plug ctrl device
*/
ctrl->slot_device_offset = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
dbg("NumSlots %d \n", ctrl->slot_device_offset);
ctrl->next_event = 0;
/* Setup the slot information structures */
rc = ctrl_slot_setup(ctrl, smbios_start, smbios_table);
if (rc) {
err(msg_initialization_err, 6);
err(__FUNCTION__": unable to save PCI configuration data, error %d\n", rc);
goto err_iounmap;
}
/* Mask all general input interrupts */
writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_MASK);
/* set up the interrupt */
ctrl->interrupt = pdev->irq;
dbg("HPC interrupt = %d \n", ctrl->interrupt);
if (request_irq(ctrl->interrupt,
(void (*)(int, void *, struct pt_regs *)) &cpqhp_ctrl_intr,
SA_SHIRQ, MY_NAME, ctrl)) {
err("Can't get irq %d for the hotplug pci controller\n", ctrl->interrupt);
rc = -ENODEV;
goto err_iounmap;
}
/* Enable Shift Out interrupt and clear it, also enable SERR on power fault */
temp_word = readw(ctrl->hpc_reg + MISC);
temp_word |= 0x4006;
writew(temp_word, ctrl->hpc_reg + MISC);
// Changed 05/05/97 to clear all interrupts at start
writel(0xFFFFFFFFL, ctrl->hpc_reg + INT_INPUT_CLEAR);
ctrl->ctrl_int_comp = readl(ctrl->hpc_reg + INT_INPUT_CLEAR);
writel(0x0L, ctrl->hpc_reg + INT_MASK);
if (!cpqhp_ctrl_list) {
cpqhp_ctrl_list = ctrl;
ctrl->next = NULL;
} else {
ctrl->next = cpqhp_ctrl_list;
cpqhp_ctrl_list = ctrl;
}
// turn off empty slots here unless command line option "ON" set
// Wait for exclusive access to hardware
down(&ctrl->crit_sect);
num_of_slots = readb(ctrl->hpc_reg + SLOT_MASK) & 0x0F;
// find first device number for the ctrl
device = readb(ctrl->hpc_reg + SLOT_MASK) >> 4;
while (num_of_slots) {
dbg("num_of_slots: %d\n", num_of_slots);
func = cpqhp_slot_find(ctrl->bus, device, 0);
if (!func)
break;
hp_slot = func->device - ctrl->slot_device_offset;
dbg("hp_slot: %d\n", hp_slot);
// We have to save the presence info for these slots
temp_word = ctrl->ctrl_int_comp >> 16;
func->presence_save = (temp_word >> hp_slot) & 0x01;
func->presence_save |= (temp_word >> (hp_slot + 7)) & 0x02;
if (ctrl->ctrl_int_comp & (0x1L << hp_slot)) {
func->switch_save = 0;
} else {
func->switch_save = 0x10;
}
if (!power_mode) {
if (!func->is_a_board) {
green_LED_off (ctrl, hp_slot);
slot_disable (ctrl, hp_slot);
}
}
device++;
num_of_slots--;
}
if (!power_mode) {
set_SOGO(ctrl);
// Wait for SOBS to be unset
wait_for_ctrl_irq (ctrl);
}
rc = init_SERR(ctrl);
if (rc) {
err("init_SERR failed\n");
up(&ctrl->crit_sect);
goto err_free_irq;
}
// Done with exclusive hardware access
up(&ctrl->crit_sect);
rc = cpqhp_proc_create_ctrl (ctrl);
if (rc) {
err("cpqhp_proc_create_ctrl failed\n");
goto err_free_irq;
}
return 0;
err_free_irq:
free_irq(ctrl->interrupt, ctrl);
err_iounmap:
iounmap(ctrl->hpc_reg);
err_free_mem_region:
release_mem_region(pci_resource_start(pdev, 0), pci_resource_len(pdev, 0));
err_free_ctrl:
kfree(ctrl);
return rc;
}
static int one_time_init(void)
{
int loop;
int retval = 0;
static int initialized = 0;
if (initialized)
return 0;
power_mode = 0;
retval = pci_print_IRQ_route();
if (retval)
goto error;
dbg("Initialize + Start the notification mechanism \n");
retval = cpqhp_event_start_thread();
if (retval)
goto error;
dbg("Initialize slot lists\n");
for (loop = 0; loop < 256; loop++) {
cpqhp_slot_list[loop] = NULL;
}
// FIXME: We also need to hook the NMI handler eventually.
// this also needs to be worked with Christoph
// register_NMI_handler();
// Map rom address
cpqhp_rom_start = ioremap(ROM_PHY_ADDR, ROM_PHY_LEN);
if (!cpqhp_rom_start) {
err ("Could not ioremap memory region for ROM\n");
retval = -EIO;;
goto error;
}
/* Now, map the int15 entry point if we are on compaq specific hardware */
compaq_nvram_init(cpqhp_rom_start);
/* Map smbios table entry point structure */
smbios_table = detect_SMBIOS_pointer(cpqhp_rom_start, cpqhp_rom_start + ROM_PHY_LEN);
if (!smbios_table) {
err ("Could not find the SMBIOS pointer in memory\n");
retval = -EIO;;
goto error;
}
smbios_start = ioremap(readl(smbios_table + ST_ADDRESS), readw(smbios_table + ST_LENGTH));
if (!smbios_start) {
err ("Could not ioremap memory region taken from SMBIOS values\n");
retval = -EIO;;
goto error;
}
retval = cpqhp_proc_init_ctrl();
if (retval)
goto error;
initialized = 1;
return retval;
error:
if (cpqhp_rom_start)
iounmap(cpqhp_rom_start);
if (smbios_start)
iounmap(smbios_start);
return retval;
}
static void unload_cpqphpd(void)
{
struct pci_func *next;
struct pci_func *TempSlot;
int loop;
u32 rc;
struct controller *ctrl;
struct controller *tctrl;
struct pci_resource *res;
struct pci_resource *tres;
rc = compaq_nvram_store(cpqhp_rom_start);
ctrl = cpqhp_ctrl_list;
while (ctrl) {
cpqhp_proc_remove_ctrl (ctrl);
if (ctrl->hpc_reg) {
u16 misc;
rc = read_slot_enable (ctrl);
writeb(0, ctrl->hpc_reg + SLOT_SERR);
writel(0xFFFFFFC0L | ~rc, ctrl->hpc_reg + INT_MASK);
misc = readw(ctrl->hpc_reg + MISC);
misc &= 0xFFFD;
writew(misc, ctrl->hpc_reg + MISC);
}
ctrl_slot_cleanup(ctrl);
res = ctrl->io_head;
while (res) {
tres = res;
res = res->next;
kfree(tres);
}
res = ctrl->mem_head;
while (res) {
tres = res;
res = res->next;
kfree(tres);
}
res = ctrl->p_mem_head;
while (res) {
tres = res;
res = res->next;
kfree(tres);
}
res = ctrl->bus_head;
while (res) {
tres = res;
res = res->next;
kfree(tres);
}
tctrl = ctrl;
ctrl = ctrl->next;
kfree(tctrl);
}
for (loop = 0; loop < 256; loop++) {
next = cpqhp_slot_list[loop];
while (next != NULL) {
res = next->io_head;
while (res) {
tres = res;
res = res->next;
kfree(tres);
}
res = next->mem_head;
while (res) {
tres = res;
res = res->next;
kfree(tres);
}
res = next->p_mem_head;
while (res) {
tres = res;
res = res->next;
kfree(tres);
}
res = next->bus_head;
while (res) {
tres = res;
res = res->next;
kfree(tres);
}
TempSlot = next;
next = next->next;
kfree(TempSlot);
}
}
remove_proc_entry("hpc", 0);
// Stop the notification mechanism
cpqhp_event_stop_thread();
//unmap the rom address
if (cpqhp_rom_start)
iounmap(cpqhp_rom_start);
if (smbios_start)
iounmap(smbios_start);
}
static struct pci_device_id hpcd_pci_tbl[] __devinitdata = {
{
/* handle any PCI Hotplug controller */
class: ((PCI_CLASS_SYSTEM_PCI_HOTPLUG << 8) | 0x00),
class_mask: ~0,
/* no matter who makes it */
vendor: PCI_ANY_ID,
device: PCI_ANY_ID,
subvendor: PCI_ANY_ID,
subdevice: PCI_ANY_ID,
}, { /* end: all zeroes */ }
};
MODULE_DEVICE_TABLE(pci, hpcd_pci_tbl);
static struct pci_driver cpqhpc_driver = {
name: "pci_hotplug",
id_table: hpcd_pci_tbl,
probe: cpqhpc_probe,
/* remove: cpqhpc_remove_one, */
};
static int __init cpqhpc_init(void)
{
int result;
cpqhp_debug = debug;
result = pci_module_init(&cpqhpc_driver);
dbg("pci_module_init = %d\n", result);
if (result)
return result;
info (DRIVER_DESC " version: " DRIVER_VERSION "\n");
return 0;
}
static void __exit cpqhpc_cleanup(void)
{
dbg("cleaning up proc entries\n");
cpqhp_proc_destroy_ctrl();
dbg("unload_cpqphpd()\n");
unload_cpqphpd();
dbg("pci_unregister_driver\n");
pci_unregister_driver(&cpqhpc_driver);
}
module_init(cpqhpc_init);
module_exit(cpqhpc_cleanup);
|