Viewing file:  tty_io.c (59.74 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* linux/drivers/char/tty_io.c
*
* Copyright (C) 1991, 1992 Linus Torvalds
*/
/*
* 'tty_io.c' gives an orthogonal feeling to tty's, be they consoles
* or rs-channels. It also implements echoing, cooked mode etc.
*
* Kill-line thanks to John T Kohl, who also corrected VMIN = VTIME = 0.
*
* Modified by Theodore Ts'o, 9/14/92, to dynamically allocate the
* tty_struct and tty_queue structures. Previously there was an array
* of 256 tty_struct's which was statically allocated, and the
* tty_queue structures were allocated at boot time. Both are now
* dynamically allocated only when the tty is open.
*
* Also restructured routines so that there is more of a separation
* between the high-level tty routines (tty_io.c and tty_ioctl.c) and
* the low-level tty routines (serial.c, pty.c, console.c). This
* makes for cleaner and more compact code. -TYT, 9/17/92
*
* Modified by Fred N. van Kempen, 01/29/93, to add line disciplines
* which can be dynamically activated and de-activated by the line
* discipline handling modules (like SLIP).
*
* NOTE: pay no attention to the line discipline code (yet); its
* interface is still subject to change in this version...
* -- TYT, 1/31/92
*
* Added functionality to the OPOST tty handling. No delays, but all
* other bits should be there.
* -- Nick Holloway <alfie@dcs.warwick.ac.uk>, 27th May 1993.
*
* Rewrote canonical mode and added more termios flags.
* -- julian@uhunix.uhcc.hawaii.edu (J. Cowley), 13Jan94
*
* Reorganized FASYNC support so mouse code can share it.
* -- ctm@ardi.com, 9Sep95
*
* New TIOCLINUX variants added.
* -- mj@k332.feld.cvut.cz, 19-Nov-95
*
* Restrict vt switching via ioctl()
* -- grif@cs.ucr.edu, 5-Dec-95
*
* Move console and virtual terminal code to more appropriate files,
* implement CONFIG_VT and generalize console device interface.
* -- Marko Kohtala <Marko.Kohtala@hut.fi>, March 97
*
* Rewrote init_dev and release_dev to eliminate races.
* -- Bill Hawes <whawes@star.net>, June 97
*
* Added devfs support.
* -- C. Scott Ananian <cananian@alumni.princeton.edu>, 13-Jan-1998
*
* Added support for a Unix98-style ptmx device.
* -- C. Scott Ananian <cananian@alumni.princeton.edu>, 14-Jan-1998
*
* Reduced memory usage for older ARM systems
* -- Russell King <rmk@arm.linux.org.uk>
*
* Move do_SAK() into process context. Less stack use in devfs functions.
* alloc_tty_struct() always uses kmalloc() -- Andrew Morton <andrewm@uow.edu.eu> 17Mar01
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/major.h>
#include <linux/errno.h>
#include <linux/signal.h>
#include <linux/fcntl.h>
#include <linux/sched.h>
#include <linux/interrupt.h>
#include <linux/tty.h>
#include <linux/tty_driver.h>
#include <linux/tty_flip.h>
#include <linux/devpts_fs.h>
#include <linux/file.h>
#include <linux/console.h>
#include <linux/timer.h>
#include <linux/ctype.h>
#include <linux/kd.h>
#include <linux/mm.h>
#include <linux/string.h>
#include <linux/slab.h>
#include <linux/poll.h>
#include <linux/proc_fs.h>
#include <linux/init.h>
#include <linux/module.h>
#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/system.h>
#include <asm/bitops.h>
#include <linux/kbd_kern.h>
#include <linux/vt_kern.h>
#include <linux/selection.h>
#include <linux/devfs_fs_kernel.h>
#include <linux/kmod.h>
#ifdef CONFIG_VT
extern void con_init_devfs (void);
#endif
#define CONSOLE_DEV MKDEV(TTY_MAJOR,0)
#define TTY_DEV MKDEV(TTYAUX_MAJOR,0)
#define SYSCONS_DEV MKDEV(TTYAUX_MAJOR,1)
#define PTMX_DEV MKDEV(TTYAUX_MAJOR,2)
#undef TTY_DEBUG_HANGUP
#define TTY_PARANOIA_CHECK 1
#define CHECK_TTY_COUNT 1
struct termios tty_std_termios; /* for the benefit of tty drivers */
struct tty_driver *tty_drivers; /* linked list of tty drivers */
struct tty_ldisc ldiscs[NR_LDISCS]; /* line disc dispatch table */
#ifdef CONFIG_UNIX98_PTYS
extern struct tty_driver ptm_driver[]; /* Unix98 pty masters; for /dev/ptmx */
extern struct tty_driver pts_driver[]; /* Unix98 pty slaves; for /dev/ptmx */
#endif
/*
* redirect is the pseudo-tty that console output
* is redirected to if asked by TIOCCONS.
*/
struct tty_struct * redirect;
static void initialize_tty_struct(struct tty_struct *tty);
static ssize_t tty_read(struct file *, char *, size_t, loff_t *);
static ssize_t tty_write(struct file *, const char *, size_t, loff_t *);
static unsigned int tty_poll(struct file *, poll_table *);
static int tty_open(struct inode *, struct file *);
static int tty_release(struct inode *, struct file *);
int tty_ioctl(struct inode * inode, struct file * file,
unsigned int cmd, unsigned long arg);
static int tty_fasync(int fd, struct file * filp, int on);
extern int vme_scc_init (void);
extern long vme_scc_console_init(void);
extern int serial167_init(void);
extern long serial167_console_init(void);
extern void console_8xx_init(void);
extern int rs_8xx_init(void);
extern void mac_scc_console_init(void);
extern void hwc_console_init(void);
extern void hwc_tty_init(void);
extern void con3215_init(void);
extern void tty3215_init(void);
extern void tub3270_con_init(void);
extern void tub3270_init(void);
extern void rs285_console_init(void);
extern void sa1100_rs_console_init(void);
extern void sgi_serial_console_init(void);
extern void sci_console_init(void);
extern void tx3912_console_init(void);
extern void tx3912_rs_init(void);
#ifndef MIN
#define MIN(a,b) ((a) < (b) ? (a) : (b))
#endif
#ifndef MAX
#define MAX(a,b) ((a) < (b) ? (b) : (a))
#endif
static struct tty_struct *alloc_tty_struct(void)
{
struct tty_struct *tty;
tty = kmalloc(sizeof(struct tty_struct), GFP_KERNEL);
if (tty)
memset(tty, 0, sizeof(struct tty_struct));
return tty;
}
static inline void free_tty_struct(struct tty_struct *tty)
{
kfree(tty);
}
/*
* This routine returns the name of tty.
*/
static char *
_tty_make_name(struct tty_struct *tty, const char *name, char *buf)
{
int idx = (tty)?MINOR(tty->device) - tty->driver.minor_start:0;
if (!tty) /* Hmm. NULL pointer. That's fun. */
strcpy(buf, "NULL tty");
else
sprintf(buf, name,
idx + tty->driver.name_base);
return buf;
}
#define TTY_NUMBER(tty) (MINOR((tty)->device) - (tty)->driver.minor_start + \
(tty)->driver.name_base)
char *tty_name(struct tty_struct *tty, char *buf)
{
return _tty_make_name(tty, (tty)?tty->driver.name:NULL, buf);
}
inline int tty_paranoia_check(struct tty_struct *tty, kdev_t device,
const char *routine)
{
#ifdef TTY_PARANOIA_CHECK
static const char badmagic[] = KERN_WARNING
"Warning: bad magic number for tty struct (%s) in %s\n";
static const char badtty[] = KERN_WARNING
"Warning: null TTY for (%s) in %s\n";
if (!tty) {
printk(badtty, kdevname(device), routine);
return 1;
}
if (tty->magic != TTY_MAGIC) {
printk(badmagic, kdevname(device), routine);
return 1;
}
#endif
return 0;
}
static int check_tty_count(struct tty_struct *tty, const char *routine)
{
#ifdef CHECK_TTY_COUNT
struct list_head *p;
int count = 0;
file_list_lock();
for(p = tty->tty_files.next; p != &tty->tty_files; p = p->next) {
if(list_entry(p, struct file, f_list)->private_data == tty)
count++;
}
file_list_unlock();
if (tty->driver.type == TTY_DRIVER_TYPE_PTY &&
tty->driver.subtype == PTY_TYPE_SLAVE &&
tty->link && tty->link->count)
count++;
if (tty->count != count) {
printk(KERN_WARNING "Warning: dev (%s) tty->count(%d) "
"!= #fd's(%d) in %s\n",
kdevname(tty->device), tty->count, count, routine);
return count;
}
#endif
return 0;
}
int tty_register_ldisc(int disc, struct tty_ldisc *new_ldisc)
{
if (disc < N_TTY || disc >= NR_LDISCS)
return -EINVAL;
if (new_ldisc) {
ldiscs[disc] = *new_ldisc;
ldiscs[disc].flags |= LDISC_FLAG_DEFINED;
ldiscs[disc].num = disc;
} else
memset(&ldiscs[disc], 0, sizeof(struct tty_ldisc));
return 0;
}
EXPORT_SYMBOL(tty_register_ldisc);
/* Set the discipline of a tty line. */
static int tty_set_ldisc(struct tty_struct *tty, int ldisc)
{
int retval = 0;
struct tty_ldisc o_ldisc;
char buf[64];
if ((ldisc < N_TTY) || (ldisc >= NR_LDISCS))
return -EINVAL;
/* Eduardo Blanco <ejbs@cs.cs.com.uy> */
/* Cyrus Durgin <cider@speakeasy.org> */
if (!(ldiscs[ldisc].flags & LDISC_FLAG_DEFINED)) {
char modname [20];
sprintf(modname, "tty-ldisc-%d", ldisc);
request_module (modname);
}
if (!(ldiscs[ldisc].flags & LDISC_FLAG_DEFINED))
return -EINVAL;
if (tty->ldisc.num == ldisc)
return 0; /* We are already in the desired discipline */
o_ldisc = tty->ldisc;
tty_wait_until_sent(tty, 0);
/* Shutdown the current discipline. */
if (tty->ldisc.close)
(tty->ldisc.close)(tty);
/* Now set up the new line discipline. */
tty->ldisc = ldiscs[ldisc];
tty->termios->c_line = ldisc;
if (tty->ldisc.open)
retval = (tty->ldisc.open)(tty);
if (retval < 0) {
tty->ldisc = o_ldisc;
tty->termios->c_line = tty->ldisc.num;
if (tty->ldisc.open && (tty->ldisc.open(tty) < 0)) {
tty->ldisc = ldiscs[N_TTY];
tty->termios->c_line = N_TTY;
if (tty->ldisc.open) {
int r = tty->ldisc.open(tty);
if (r < 0)
panic("Couldn't open N_TTY ldisc for "
"%s --- error %d.",
tty_name(tty, buf), r);
}
}
}
if (tty->ldisc.num != o_ldisc.num && tty->driver.set_ldisc)
tty->driver.set_ldisc(tty);
return retval;
}
/*
* This routine returns a tty driver structure, given a device number
*/
struct tty_driver *get_tty_driver(kdev_t device)
{
int major, minor;
struct tty_driver *p;
minor = MINOR(device);
major = MAJOR(device);
for (p = tty_drivers; p; p = p->next) {
if (p->major != major)
continue;
if (minor < p->minor_start)
continue;
if (minor >= p->minor_start + p->num)
continue;
return p;
}
return NULL;
}
/*
* If we try to write to, or set the state of, a terminal and we're
* not in the foreground, send a SIGTTOU. If the signal is blocked or
* ignored, go ahead and perform the operation. (POSIX 7.2)
*/
int tty_check_change(struct tty_struct * tty)
{
if (current->tty != tty)
return 0;
if (tty->pgrp <= 0) {
printk(KERN_WARNING "tty_check_change: tty->pgrp <= 0!\n");
return 0;
}
if (current->pgrp == tty->pgrp)
return 0;
if (is_ignored(SIGTTOU))
return 0;
if (is_orphaned_pgrp(current->pgrp))
return -EIO;
(void) kill_pg(current->pgrp,SIGTTOU,1);
return -ERESTARTSYS;
}
static ssize_t hung_up_tty_read(struct file * file, char * buf,
size_t count, loff_t *ppos)
{
/* Can't seek (pread) on ttys. */
if (ppos != &file->f_pos)
return -ESPIPE;
return 0;
}
static ssize_t hung_up_tty_write(struct file * file, const char * buf,
size_t count, loff_t *ppos)
{
/* Can't seek (pwrite) on ttys. */
if (ppos != &file->f_pos)
return -ESPIPE;
return -EIO;
}
/* No kernel lock held - none needed ;) */
static unsigned int hung_up_tty_poll(struct file * filp, poll_table * wait)
{
return POLLIN | POLLOUT | POLLERR | POLLHUP | POLLRDNORM | POLLWRNORM;
}
static int hung_up_tty_ioctl(struct inode * inode, struct file * file,
unsigned int cmd, unsigned long arg)
{
return cmd == TIOCSPGRP ? -ENOTTY : -EIO;
}
static struct file_operations tty_fops = {
llseek: no_llseek,
read: tty_read,
write: tty_write,
poll: tty_poll,
ioctl: tty_ioctl,
open: tty_open,
release: tty_release,
fasync: tty_fasync,
};
static struct file_operations hung_up_tty_fops = {
llseek: no_llseek,
read: hung_up_tty_read,
write: hung_up_tty_write,
poll: hung_up_tty_poll,
ioctl: hung_up_tty_ioctl,
release: tty_release,
};
/*
* This can be called by the "eventd" kernel thread. That is process synchronous,
* but doesn't hold any locks, so we need to make sure we have the appropriate
* locks for what we're doing..
*/
void do_tty_hangup(void *data)
{
struct tty_struct *tty = (struct tty_struct *) data;
struct file * cons_filp = NULL;
struct task_struct *p;
struct list_head *l;
int closecount = 0, n;
if (!tty)
return;
/* inuse_filps is protected by the single kernel lock */
lock_kernel();
check_tty_count(tty, "do_tty_hangup");
file_list_lock();
for (l = tty->tty_files.next; l != &tty->tty_files; l = l->next) {
struct file * filp = list_entry(l, struct file, f_list);
if (filp->f_dentry->d_inode->i_rdev == CONSOLE_DEV ||
filp->f_dentry->d_inode->i_rdev == SYSCONS_DEV) {
cons_filp = filp;
continue;
}
if (filp->f_op != &tty_fops)
continue;
closecount++;
tty_fasync(-1, filp, 0); /* can't block */
filp->f_op = &hung_up_tty_fops;
}
file_list_unlock();
/* FIXME! What are the locking issues here? This may me overdoing things.. */
{
unsigned long flags;
save_flags(flags); cli();
if (tty->ldisc.flush_buffer)
tty->ldisc.flush_buffer(tty);
if (tty->driver.flush_buffer)
tty->driver.flush_buffer(tty);
if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) &&
tty->ldisc.write_wakeup)
(tty->ldisc.write_wakeup)(tty);
restore_flags(flags);
}
wake_up_interruptible(&tty->write_wait);
wake_up_interruptible(&tty->read_wait);
/*
* Shutdown the current line discipline, and reset it to
* N_TTY.
*/
if (tty->driver.flags & TTY_DRIVER_RESET_TERMIOS)
*tty->termios = tty->driver.init_termios;
if (tty->ldisc.num != ldiscs[N_TTY].num) {
if (tty->ldisc.close)
(tty->ldisc.close)(tty);
tty->ldisc = ldiscs[N_TTY];
tty->termios->c_line = N_TTY;
if (tty->ldisc.open) {
int i = (tty->ldisc.open)(tty);
if (i < 0)
printk(KERN_ERR "do_tty_hangup: N_TTY open: "
"error %d\n", -i);
}
}
read_lock(&tasklist_lock);
for_each_task(p) {
if ((tty->session > 0) && (p->session == tty->session) &&
p->leader) {
send_sig(SIGHUP,p,1);
send_sig(SIGCONT,p,1);
if (tty->pgrp > 0)
p->tty_old_pgrp = tty->pgrp;
}
if (p->tty == tty)
p->tty = NULL;
}
read_unlock(&tasklist_lock);
tty->flags = 0;
tty->session = 0;
tty->pgrp = -1;
tty->ctrl_status = 0;
/*
* If one of the devices matches a console pointer, we
* cannot just call hangup() because that will cause
* tty->count and state->count to go out of sync.
* So we just call close() the right number of times.
*/
if (cons_filp) {
if (tty->driver.close)
for (n = 0; n < closecount; n++)
tty->driver.close(tty, cons_filp);
} else if (tty->driver.hangup)
(tty->driver.hangup)(tty);
unlock_kernel();
}
void tty_hangup(struct tty_struct * tty)
{
#ifdef TTY_DEBUG_HANGUP
char buf[64];
printk(KERN_DEBUG "%s hangup...\n", tty_name(tty, buf));
#endif
schedule_task(&tty->tq_hangup);
}
void tty_vhangup(struct tty_struct * tty)
{
#ifdef TTY_DEBUG_HANGUP
char buf[64];
printk(KERN_DEBUG "%s vhangup...\n", tty_name(tty, buf));
#endif
do_tty_hangup((void *) tty);
}
int tty_hung_up_p(struct file * filp)
{
return (filp->f_op == &hung_up_tty_fops);
}
/*
* This function is typically called only by the session leader, when
* it wants to disassociate itself from its controlling tty.
*
* It performs the following functions:
* (1) Sends a SIGHUP and SIGCONT to the foreground process group
* (2) Clears the tty from being controlling the session
* (3) Clears the controlling tty for all processes in the
* session group.
*
* The argument on_exit is set to 1 if called when a process is
* exiting; it is 0 if called by the ioctl TIOCNOTTY.
*/
void disassociate_ctty(int on_exit)
{
struct tty_struct *tty = current->tty;
struct task_struct *p;
int tty_pgrp = -1;
if (tty) {
tty_pgrp = tty->pgrp;
if (on_exit && tty->driver.type != TTY_DRIVER_TYPE_PTY)
tty_vhangup(tty);
} else {
if (current->tty_old_pgrp) {
kill_pg(current->tty_old_pgrp, SIGHUP, on_exit);
kill_pg(current->tty_old_pgrp, SIGCONT, on_exit);
}
return;
}
if (tty_pgrp > 0) {
kill_pg(tty_pgrp, SIGHUP, on_exit);
if (!on_exit)
kill_pg(tty_pgrp, SIGCONT, on_exit);
}
current->tty_old_pgrp = 0;
tty->session = 0;
tty->pgrp = -1;
read_lock(&tasklist_lock);
for_each_task(p)
if (p->session == current->session)
p->tty = NULL;
read_unlock(&tasklist_lock);
}
void wait_for_keypress(void)
{
struct console *c = console_drivers;
if (c) c->wait_key(c);
}
void stop_tty(struct tty_struct *tty)
{
if (tty->stopped)
return;
tty->stopped = 1;
if (tty->link && tty->link->packet) {
tty->ctrl_status &= ~TIOCPKT_START;
tty->ctrl_status |= TIOCPKT_STOP;
wake_up_interruptible(&tty->link->read_wait);
}
if (tty->driver.stop)
(tty->driver.stop)(tty);
}
void start_tty(struct tty_struct *tty)
{
if (!tty->stopped || tty->flow_stopped)
return;
tty->stopped = 0;
if (tty->link && tty->link->packet) {
tty->ctrl_status &= ~TIOCPKT_STOP;
tty->ctrl_status |= TIOCPKT_START;
wake_up_interruptible(&tty->link->read_wait);
}
if (tty->driver.start)
(tty->driver.start)(tty);
if ((test_bit(TTY_DO_WRITE_WAKEUP, &tty->flags)) &&
tty->ldisc.write_wakeup)
(tty->ldisc.write_wakeup)(tty);
wake_up_interruptible(&tty->write_wait);
}
static ssize_t tty_read(struct file * file, char * buf, size_t count,
loff_t *ppos)
{
int i;
struct tty_struct * tty;
struct inode *inode;
/* Can't seek (pread) on ttys. */
if (ppos != &file->f_pos)
return -ESPIPE;
tty = (struct tty_struct *)file->private_data;
inode = file->f_dentry->d_inode;
if (tty_paranoia_check(tty, inode->i_rdev, "tty_read"))
return -EIO;
if (!tty || (test_bit(TTY_IO_ERROR, &tty->flags)))
return -EIO;
/* This check not only needs to be done before reading, but also
whenever read_chan() gets woken up after sleeping, so I've
moved it to there. This should only be done for the N_TTY
line discipline, anyway. Same goes for write_chan(). -- jlc. */
#if 0
if ((inode->i_rdev != CONSOLE_DEV) && /* don't stop on /dev/console */
(tty->pgrp > 0) &&
(current->tty == tty) &&
(tty->pgrp != current->pgrp))
if (is_ignored(SIGTTIN) || is_orphaned_pgrp(current->pgrp))
return -EIO;
else {
(void) kill_pg(current->pgrp, SIGTTIN, 1);
return -ERESTARTSYS;
}
#endif
lock_kernel();
if (tty->ldisc.read)
i = (tty->ldisc.read)(tty,file,buf,count);
else
i = -EIO;
unlock_kernel();
if (i > 0)
inode->i_atime = CURRENT_TIME;
return i;
}
/*
* Split writes up in sane blocksizes to avoid
* denial-of-service type attacks
*/
static inline ssize_t do_tty_write(
ssize_t (*write)(struct tty_struct *, struct file *, const unsigned char *, size_t),
struct tty_struct *tty,
struct file *file,
const unsigned char *buf,
size_t count)
{
ssize_t ret = 0, written = 0;
if (file->f_flags & O_NONBLOCK) {
if (down_trylock(&tty->atomic_write))
return -EAGAIN;
}
else {
if (down_interruptible(&tty->atomic_write))
return -ERESTARTSYS;
}
if ( test_bit(TTY_NO_WRITE_SPLIT, &tty->flags) ) {
lock_kernel();
written = write(tty, file, buf, count);
unlock_kernel();
} else {
for (;;) {
unsigned long size = MAX(PAGE_SIZE*2,16384);
if (size > count)
size = count;
lock_kernel();
ret = write(tty, file, buf, size);
unlock_kernel();
if (ret <= 0)
break;
written += ret;
buf += ret;
count -= ret;
if (!count)
break;
ret = -ERESTARTSYS;
if (signal_pending(current))
break;
if (current->need_resched)
schedule();
}
}
if (written) {
file->f_dentry->d_inode->i_mtime = CURRENT_TIME;
ret = written;
}
up(&tty->atomic_write);
return ret;
}
static ssize_t tty_write(struct file * file, const char * buf, size_t count,
loff_t *ppos)
{
int is_console;
struct tty_struct * tty;
struct inode *inode;
/* Can't seek (pwrite) on ttys. */
if (ppos != &file->f_pos)
return -ESPIPE;
/*
* For now, we redirect writes from /dev/console as
* well as /dev/tty0.
*/
inode = file->f_dentry->d_inode;
is_console = (inode->i_rdev == SYSCONS_DEV ||
inode->i_rdev == CONSOLE_DEV);
if (is_console && redirect)
tty = redirect;
else
tty = (struct tty_struct *)file->private_data;
if (tty_paranoia_check(tty, inode->i_rdev, "tty_write"))
return -EIO;
if (!tty || !tty->driver.write || (test_bit(TTY_IO_ERROR, &tty->flags)))
return -EIO;
#if 0
if (!is_console && L_TOSTOP(tty) && (tty->pgrp > 0) &&
(current->tty == tty) && (tty->pgrp != current->pgrp)) {
if (is_orphaned_pgrp(current->pgrp))
return -EIO;
if (!is_ignored(SIGTTOU)) {
(void) kill_pg(current->pgrp, SIGTTOU, 1);
return -ERESTARTSYS;
}
}
#endif
if (!tty->ldisc.write)
return -EIO;
return do_tty_write(tty->ldisc.write, tty, file,
(const unsigned char *)buf, count);
}
/* Semaphore to protect creating and releasing a tty */
static DECLARE_MUTEX(tty_sem);
static void down_tty_sem(int index)
{
down(&tty_sem);
}
static void up_tty_sem(int index)
{
up(&tty_sem);
}
static void release_mem(struct tty_struct *tty, int idx);
/*
* WSH 06/09/97: Rewritten to remove races and properly clean up after a
* failed open. The new code protects the open with a semaphore, so it's
* really quite straightforward. The semaphore locking can probably be
* relaxed for the (most common) case of reopening a tty.
*/
static int init_dev(kdev_t device, struct tty_struct **ret_tty)
{
struct tty_struct *tty, *o_tty;
struct termios *tp, **tp_loc, *o_tp, **o_tp_loc;
struct termios *ltp, **ltp_loc, *o_ltp, **o_ltp_loc;
struct tty_driver *driver;
int retval=0;
int idx;
driver = get_tty_driver(device);
if (!driver)
return -ENODEV;
idx = MINOR(device) - driver->minor_start;
/*
* Check whether we need to acquire the tty semaphore to avoid
* race conditions. For now, play it safe.
*/
down_tty_sem(idx);
/* check whether we're reopening an existing tty */
tty = driver->table[idx];
if (tty) goto fast_track;
/*
* First time open is complex, especially for PTY devices.
* This code guarantees that either everything succeeds and the
* TTY is ready for operation, or else the table slots are vacated
* and the allocated memory released. (Except that the termios
* and locked termios may be retained.)
*/
o_tty = NULL;
tp = o_tp = NULL;
ltp = o_ltp = NULL;
tty = alloc_tty_struct();
if(!tty)
goto fail_no_mem;
initialize_tty_struct(tty);
tty->device = device;
tty->driver = *driver;
tp_loc = &driver->termios[idx];
if (!*tp_loc) {
tp = (struct termios *) kmalloc(sizeof(struct termios),
GFP_KERNEL);
if (!tp)
goto free_mem_out;
*tp = driver->init_termios;
}
ltp_loc = &driver->termios_locked[idx];
if (!*ltp_loc) {
ltp = (struct termios *) kmalloc(sizeof(struct termios),
GFP_KERNEL);
if (!ltp)
goto free_mem_out;
memset(ltp, 0, sizeof(struct termios));
}
if (driver->type == TTY_DRIVER_TYPE_PTY) {
o_tty = alloc_tty_struct();
if (!o_tty)
goto free_mem_out;
initialize_tty_struct(o_tty);
o_tty->device = (kdev_t) MKDEV(driver->other->major,
driver->other->minor_start + idx);
o_tty->driver = *driver->other;
o_tp_loc = &driver->other->termios[idx];
if (!*o_tp_loc) {
o_tp = (struct termios *)
kmalloc(sizeof(struct termios), GFP_KERNEL);
if (!o_tp)
goto free_mem_out;
*o_tp = driver->other->init_termios;
}
o_ltp_loc = &driver->other->termios_locked[idx];
if (!*o_ltp_loc) {
o_ltp = (struct termios *)
kmalloc(sizeof(struct termios), GFP_KERNEL);
if (!o_ltp)
goto free_mem_out;
memset(o_ltp, 0, sizeof(struct termios));
}
/*
* Everything allocated ... set up the o_tty structure.
*/
driver->other->table[idx] = o_tty;
if (!*o_tp_loc)
*o_tp_loc = o_tp;
if (!*o_ltp_loc)
*o_ltp_loc = o_ltp;
o_tty->termios = *o_tp_loc;
o_tty->termios_locked = *o_ltp_loc;
(*driver->other->refcount)++;
if (driver->subtype == PTY_TYPE_MASTER)
o_tty->count++;
/* Establish the links in both directions */
tty->link = o_tty;
o_tty->link = tty;
}
/*
* All structures have been allocated, so now we install them.
* Failures after this point use release_mem to clean up, so
* there's no need to null out the local pointers.
*/
driver->table[idx] = tty;
if (!*tp_loc)
*tp_loc = tp;
if (!*ltp_loc)
*ltp_loc = ltp;
tty->termios = *tp_loc;
tty->termios_locked = *ltp_loc;
(*driver->refcount)++;
tty->count++;
/*
* Structures all installed ... call the ldisc open routines.
* If we fail here just call release_mem to clean up. No need
* to decrement the use counts, as release_mem doesn't care.
*/
if (tty->ldisc.open) {
retval = (tty->ldisc.open)(tty);
if (retval)
goto release_mem_out;
}
if (o_tty && o_tty->ldisc.open) {
retval = (o_tty->ldisc.open)(o_tty);
if (retval) {
if (tty->ldisc.close)
(tty->ldisc.close)(tty);
goto release_mem_out;
}
}
goto success;
/*
* This fast open can be used if the tty is already open.
* No memory is allocated, and the only failures are from
* attempting to open a closing tty or attempting multiple
* opens on a pty master.
*/
fast_track:
if (test_bit(TTY_CLOSING, &tty->flags)) {
retval = -EIO;
goto end_init;
}
if (driver->type == TTY_DRIVER_TYPE_PTY &&
driver->subtype == PTY_TYPE_MASTER) {
/*
* special case for PTY masters: only one open permitted,
* and the slave side open count is incremented as well.
*/
if (tty->count) {
retval = -EIO;
goto end_init;
}
tty->link->count++;
}
tty->count++;
tty->driver = *driver; /* N.B. why do this every time?? */
success:
*ret_tty = tty;
/* All paths come through here to release the semaphore */
end_init:
up_tty_sem(idx);
return retval;
/* Release locally allocated memory ... nothing placed in slots */
free_mem_out:
if (o_tp)
kfree(o_tp);
if (o_tty)
free_tty_struct(o_tty);
if (ltp)
kfree(ltp);
if (tp)
kfree(tp);
free_tty_struct(tty);
fail_no_mem:
retval = -ENOMEM;
goto end_init;
/* call the tty release_mem routine to clean out this slot */
release_mem_out:
printk(KERN_INFO "init_dev: ldisc open failed, "
"clearing slot %d\n", idx);
release_mem(tty, idx);
goto end_init;
}
/*
* Releases memory associated with a tty structure, and clears out the
* driver table slots.
*/
static void release_mem(struct tty_struct *tty, int idx)
{
struct tty_struct *o_tty;
struct termios *tp;
if ((o_tty = tty->link) != NULL) {
o_tty->driver.table[idx] = NULL;
if (o_tty->driver.flags & TTY_DRIVER_RESET_TERMIOS) {
tp = o_tty->driver.termios[idx];
o_tty->driver.termios[idx] = NULL;
kfree(tp);
}
o_tty->magic = 0;
(*o_tty->driver.refcount)--;
list_del(&o_tty->tty_files);
free_tty_struct(o_tty);
}
tty->driver.table[idx] = NULL;
if (tty->driver.flags & TTY_DRIVER_RESET_TERMIOS) {
tp = tty->driver.termios[idx];
tty->driver.termios[idx] = NULL;
kfree(tp);
}
tty->magic = 0;
(*tty->driver.refcount)--;
list_del(&tty->tty_files);
free_tty_struct(tty);
}
/*
* Even releasing the tty structures is a tricky business.. We have
* to be very careful that the structures are all released at the
* same time, as interrupts might otherwise get the wrong pointers.
*
* WSH 09/09/97: rewritten to avoid some nasty race conditions that could
* lead to double frees or releasing memory still in use.
*/
static void release_dev(struct file * filp)
{
struct tty_struct *tty, *o_tty;
int pty_master, tty_closing, o_tty_closing, do_sleep;
int idx;
char buf[64];
tty = (struct tty_struct *)filp->private_data;
if (tty_paranoia_check(tty, filp->f_dentry->d_inode->i_rdev, "release_dev"))
return;
check_tty_count(tty, "release_dev");
tty_fasync(-1, filp, 0);
idx = MINOR(tty->device) - tty->driver.minor_start;
pty_master = (tty->driver.type == TTY_DRIVER_TYPE_PTY &&
tty->driver.subtype == PTY_TYPE_MASTER);
o_tty = tty->link;
#ifdef TTY_PARANOIA_CHECK
if (idx < 0 || idx >= tty->driver.num) {
printk(KERN_DEBUG "release_dev: bad idx when trying to "
"free (%s)\n", kdevname(tty->device));
return;
}
if (tty != tty->driver.table[idx]) {
printk(KERN_DEBUG "release_dev: driver.table[%d] not tty "
"for (%s)\n", idx, kdevname(tty->device));
return;
}
if (tty->termios != tty->driver.termios[idx]) {
printk(KERN_DEBUG "release_dev: driver.termios[%d] not termios "
"for (%s)\n",
idx, kdevname(tty->device));
return;
}
if (tty->termios_locked != tty->driver.termios_locked[idx]) {
printk(KERN_DEBUG "release_dev: driver.termios_locked[%d] not "
"termios_locked for (%s)\n",
idx, kdevname(tty->device));
return;
}
#endif
#ifdef TTY_DEBUG_HANGUP
printk(KERN_DEBUG "release_dev of %s (tty count=%d)...",
tty_name(tty, buf), tty->count);
#endif
#ifdef TTY_PARANOIA_CHECK
if (tty->driver.other) {
if (o_tty != tty->driver.other->table[idx]) {
printk(KERN_DEBUG "release_dev: other->table[%d] "
"not o_tty for (%s)\n",
idx, kdevname(tty->device));
return;
}
if (o_tty->termios != tty->driver.other->termios[idx]) {
printk(KERN_DEBUG "release_dev: other->termios[%d] "
"not o_termios for (%s)\n",
idx, kdevname(tty->device));
return;
}
if (o_tty->termios_locked !=
tty->driver.other->termios_locked[idx]) {
printk(KERN_DEBUG "release_dev: other->termios_locked["
"%d] not o_termios_locked for (%s)\n",
idx, kdevname(tty->device));
return;
}
if (o_tty->link != tty) {
printk(KERN_DEBUG "release_dev: bad pty pointers\n");
return;
}
}
#endif
if (tty->driver.close)
tty->driver.close(tty, filp);
/*
* Sanity check: if tty->count is going to zero, there shouldn't be
* any waiters on tty->read_wait or tty->write_wait. We test the
* wait queues and kick everyone out _before_ actually starting to
* close. This ensures that we won't block while releasing the tty
* structure.
*
* The test for the o_tty closing is necessary, since the master and
* slave sides may close in any order. If the slave side closes out
* first, its count will be one, since the master side holds an open.
* Thus this test wouldn't be triggered at the time the slave closes,
* so we do it now.
*
* Note that it's possible for the tty to be opened again while we're
* flushing out waiters. By recalculating the closing flags before
* each iteration we avoid any problems.
*/
while (1) {
tty_closing = tty->count <= 1;
o_tty_closing = o_tty &&
(o_tty->count <= (pty_master ? 1 : 0));
do_sleep = 0;
if (tty_closing) {
if (waitqueue_active(&tty->read_wait)) {
wake_up(&tty->read_wait);
do_sleep++;
}
if (waitqueue_active(&tty->write_wait)) {
wake_up(&tty->write_wait);
do_sleep++;
}
}
if (o_tty_closing) {
if (waitqueue_active(&o_tty->read_wait)) {
wake_up(&o_tty->read_wait);
do_sleep++;
}
if (waitqueue_active(&o_tty->write_wait)) {
wake_up(&o_tty->write_wait);
do_sleep++;
}
}
if (!do_sleep)
break;
printk(KERN_WARNING "release_dev: %s: read/write wait queue "
"active!\n", tty_name(tty, buf));
schedule();
}
/*
* The closing flags are now consistent with the open counts on
* both sides, and we've completed the last operation that could
* block, so it's safe to proceed with closing.
*/
if (pty_master) {
if (--o_tty->count < 0) {
printk(KERN_WARNING "release_dev: bad pty slave count "
"(%d) for %s\n",
o_tty->count, tty_name(o_tty, buf));
o_tty->count = 0;
}
}
if (--tty->count < 0) {
printk(KERN_WARNING "release_dev: bad tty->count (%d) for %s\n",
tty->count, tty_name(tty, buf));
tty->count = 0;
}
/*
* We've decremented tty->count, so we should zero out
* filp->private_data, to break the link between the tty and
* the file descriptor. Otherwise if filp_close() blocks before
* the file descriptor is removed from the inuse_filp
* list, check_tty_count() could observe a discrepancy and
* printk a warning message to the user.
*/
filp->private_data = 0;
/*
* Perform some housekeeping before deciding whether to return.
*
* Set the TTY_CLOSING flag if this was the last open. In the
* case of a pty we may have to wait around for the other side
* to close, and TTY_CLOSING makes sure we can't be reopened.
*/
if(tty_closing)
set_bit(TTY_CLOSING, &tty->flags);
if(o_tty_closing)
set_bit(TTY_CLOSING, &o_tty->flags);
/*
* If _either_ side is closing, make sure there aren't any
* processes that still think tty or o_tty is their controlling
* tty. Also, clear redirect if it points to either tty.
*/
if (tty_closing || o_tty_closing) {
struct task_struct *p;
read_lock(&tasklist_lock);
for_each_task(p) {
if (p->tty == tty || (o_tty && p->tty == o_tty))
p->tty = NULL;
}
read_unlock(&tasklist_lock);
if (redirect == tty || (o_tty && redirect == o_tty))
redirect = NULL;
}
/* check whether both sides are closing ... */
if (!tty_closing || (o_tty && !o_tty_closing))
return;
#ifdef TTY_DEBUG_HANGUP
printk(KERN_DEBUG "freeing tty structure...");
#endif
/*
* Shutdown the current line discipline, and reset it to N_TTY.
* N.B. why reset ldisc when we're releasing the memory??
*/
if (tty->ldisc.close)
(tty->ldisc.close)(tty);
tty->ldisc = ldiscs[N_TTY];
tty->termios->c_line = N_TTY;
if (o_tty) {
if (o_tty->ldisc.close)
(o_tty->ldisc.close)(o_tty);
o_tty->ldisc = ldiscs[N_TTY];
}
/*
* Make sure that the tty's task queue isn't activated.
*/
run_task_queue(&tq_timer);
flush_scheduled_tasks();
/*
* The release_mem function takes care of the details of clearing
* the slots and preserving the termios structure.
*/
release_mem(tty, idx);
}
/*
* tty_open and tty_release keep up the tty count that contains the
* number of opens done on a tty. We cannot use the inode-count, as
* different inodes might point to the same tty.
*
* Open-counting is needed for pty masters, as well as for keeping
* track of serial lines: DTR is dropped when the last close happens.
* (This is not done solely through tty->count, now. - Ted 1/27/92)
*
* The termios state of a pty is reset on first open so that
* settings don't persist across reuse.
*/
static int tty_open(struct inode * inode, struct file * filp)
{
struct tty_struct *tty;
int noctty, retval;
kdev_t device;
unsigned short saved_flags;
char buf[64];
saved_flags = filp->f_flags;
retry_open:
noctty = filp->f_flags & O_NOCTTY;
device = inode->i_rdev;
if (device == TTY_DEV) {
if (!current->tty)
return -ENXIO;
device = current->tty->device;
filp->f_flags |= O_NONBLOCK; /* Don't let /dev/tty block */
/* noctty = 1; */
}
#ifdef CONFIG_VT
if (device == CONSOLE_DEV) {
extern int fg_console;
device = MKDEV(TTY_MAJOR, fg_console + 1);
noctty = 1;
}
#endif
if (device == SYSCONS_DEV) {
struct console *c = console_drivers;
while(c && !c->device)
c = c->next;
if (!c)
return -ENODEV;
device = c->device(c);
filp->f_flags |= O_NONBLOCK; /* Don't let /dev/console block */
noctty = 1;
}
if (device == PTMX_DEV) {
#ifdef CONFIG_UNIX98_PTYS
/* find a free pty. */
int major, minor;
struct tty_driver *driver;
/* find a device that is not in use. */
retval = -1;
for ( major = 0 ; major < UNIX98_NR_MAJORS ; major++ ) {
driver = &ptm_driver[major];
for (minor = driver->minor_start ;
minor < driver->minor_start + driver->num ;
minor++) {
device = MKDEV(driver->major, minor);
if (!init_dev(device, &tty)) goto ptmx_found; /* ok! */
}
}
return -EIO; /* no free ptys */
ptmx_found:
set_bit(TTY_PTY_LOCK, &tty->flags); /* LOCK THE SLAVE */
minor -= driver->minor_start;
devpts_pty_new(driver->other->name_base + minor, MKDEV(driver->other->major, minor + driver->other->minor_start));
tty_register_devfs(&pts_driver[major], DEVFS_FL_DEFAULT,
pts_driver[major].minor_start + minor);
noctty = 1;
goto init_dev_done;
#else /* CONFIG_UNIX_98_PTYS */
return -ENODEV;
#endif /* CONFIG_UNIX_98_PTYS */
}
retval = init_dev(device, &tty);
if (retval)
return retval;
#ifdef CONFIG_UNIX98_PTYS
init_dev_done:
#endif
filp->private_data = tty;
file_move(filp, &tty->tty_files);
check_tty_count(tty, "tty_open");
if (tty->driver.type == TTY_DRIVER_TYPE_PTY &&
tty->driver.subtype == PTY_TYPE_MASTER)
noctty = 1;
#ifdef TTY_DEBUG_HANGUP
printk(KERN_DEBUG "opening %s...", tty_name(tty, buf));
#endif
if (tty->driver.open)
retval = tty->driver.open(tty, filp);
else
retval = -ENODEV;
filp->f_flags = saved_flags;
if (!retval && test_bit(TTY_EXCLUSIVE, &tty->flags) && !suser())
retval = -EBUSY;
if (retval) {
#ifdef TTY_DEBUG_HANGUP
printk(KERN_DEBUG "error %d in opening %s...", retval,
tty_name(tty, buf));
#endif
release_dev(filp);
if (retval != -ERESTARTSYS)
return retval;
if (signal_pending(current))
return retval;
schedule();
/*
* Need to reset f_op in case a hangup happened.
*/
filp->f_op = &tty_fops;
goto retry_open;
}
if (!noctty &&
current->leader &&
!current->tty &&
tty->session == 0) {
task_lock(current);
current->tty = tty;
task_unlock(current);
current->tty_old_pgrp = 0;
tty->session = current->session;
tty->pgrp = current->pgrp;
}
if ((tty->driver.type == TTY_DRIVER_TYPE_SERIAL) &&
(tty->driver.subtype == SERIAL_TYPE_CALLOUT) &&
(tty->count == 1)) {
static int nr_warns;
if (nr_warns < 5) {
printk(KERN_WARNING "tty_io.c: "
"process %d (%s) used obsolete /dev/%s - "
"update software to use /dev/ttyS%d\n",
current->pid, current->comm,
tty_name(tty, buf), TTY_NUMBER(tty));
nr_warns++;
}
}
return 0;
}
static int tty_release(struct inode * inode, struct file * filp)
{
lock_kernel();
release_dev(filp);
unlock_kernel();
return 0;
}
/* No kernel lock held - fine */
static unsigned int tty_poll(struct file * filp, poll_table * wait)
{
struct tty_struct * tty;
tty = (struct tty_struct *)filp->private_data;
if (tty_paranoia_check(tty, filp->f_dentry->d_inode->i_rdev, "tty_poll"))
return 0;
if (tty->ldisc.poll)
return (tty->ldisc.poll)(tty, filp, wait);
return 0;
}
static int tty_fasync(int fd, struct file * filp, int on)
{
struct tty_struct * tty;
int retval;
tty = (struct tty_struct *)filp->private_data;
if (tty_paranoia_check(tty, filp->f_dentry->d_inode->i_rdev, "tty_fasync"))
return 0;
retval = fasync_helper(fd, filp, on, &tty->fasync);
if (retval <= 0)
return retval;
if (on) {
if (!waitqueue_active(&tty->read_wait))
tty->minimum_to_wake = 1;
if (filp->f_owner.pid == 0) {
filp->f_owner.pid = (-tty->pgrp) ? : current->pid;
filp->f_owner.uid = current->uid;
filp->f_owner.euid = current->euid;
}
} else {
if (!tty->fasync && !waitqueue_active(&tty->read_wait))
tty->minimum_to_wake = N_TTY_BUF_SIZE;
}
return 0;
}
static int tiocsti(struct tty_struct *tty, char * arg)
{
char ch, mbz = 0;
if ((current->tty != tty) && !suser())
return -EPERM;
if (get_user(ch, arg))
return -EFAULT;
tty->ldisc.receive_buf(tty, &ch, &mbz, 1);
return 0;
}
static int tiocgwinsz(struct tty_struct *tty, struct winsize * arg)
{
if (copy_to_user(arg, &tty->winsize, sizeof(*arg)))
return -EFAULT;
return 0;
}
static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty,
struct winsize * arg)
{
struct winsize tmp_ws;
if (copy_from_user(&tmp_ws, arg, sizeof(*arg)))
return -EFAULT;
if (!memcmp(&tmp_ws, &tty->winsize, sizeof(*arg)))
return 0;
if (tty->pgrp > 0)
kill_pg(tty->pgrp, SIGWINCH, 1);
if ((real_tty->pgrp != tty->pgrp) && (real_tty->pgrp > 0))
kill_pg(real_tty->pgrp, SIGWINCH, 1);
tty->winsize = tmp_ws;
real_tty->winsize = tmp_ws;
return 0;
}
static int tioccons(struct inode *inode,
struct tty_struct *tty, struct tty_struct *real_tty)
{
if (inode->i_rdev == SYSCONS_DEV ||
inode->i_rdev == CONSOLE_DEV) {
if (!suser())
return -EPERM;
redirect = NULL;
return 0;
}
if (redirect)
return -EBUSY;
redirect = real_tty;
return 0;
}
static int fionbio(struct file *file, int *arg)
{
int nonblock;
if (get_user(nonblock, arg))
return -EFAULT;
if (nonblock)
file->f_flags |= O_NONBLOCK;
else
file->f_flags &= ~O_NONBLOCK;
return 0;
}
static int tiocsctty(struct tty_struct *tty, int arg)
{
if (current->leader &&
(current->session == tty->session))
return 0;
/*
* The process must be a session leader and
* not have a controlling tty already.
*/
if (!current->leader || current->tty)
return -EPERM;
if (tty->session > 0) {
/*
* This tty is already the controlling
* tty for another session group!
*/
if ((arg == 1) && suser()) {
/*
* Steal it away
*/
struct task_struct *p;
read_lock(&tasklist_lock);
for_each_task(p)
if (p->tty == tty)
p->tty = NULL;
read_unlock(&tasklist_lock);
} else
return -EPERM;
}
task_lock(current);
current->tty = tty;
task_unlock(current);
current->tty_old_pgrp = 0;
tty->session = current->session;
tty->pgrp = current->pgrp;
return 0;
}
static int tiocgpgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t *arg)
{
/*
* (tty == real_tty) is a cheap way of
* testing if the tty is NOT a master pty.
*/
if (tty == real_tty && current->tty != real_tty)
return -ENOTTY;
return put_user(real_tty->pgrp, arg);
}
static int tiocspgrp(struct tty_struct *tty, struct tty_struct *real_tty, pid_t *arg)
{
pid_t pgrp;
int retval = tty_check_change(real_tty);
if (retval == -EIO)
return -ENOTTY;
if (retval)
return retval;
if (!current->tty ||
(current->tty != real_tty) ||
(real_tty->session != current->session))
return -ENOTTY;
if (get_user(pgrp, (pid_t *) arg))
return -EFAULT;
if (pgrp < 0)
return -EINVAL;
if (session_of_pgrp(pgrp) != current->session)
return -EPERM;
real_tty->pgrp = pgrp;
return 0;
}
static int tiocgsid(struct tty_struct *tty, struct tty_struct *real_tty, pid_t *arg)
{
/*
* (tty == real_tty) is a cheap way of
* testing if the tty is NOT a master pty.
*/
if (tty == real_tty && current->tty != real_tty)
return -ENOTTY;
if (real_tty->session <= 0)
return -ENOTTY;
return put_user(real_tty->session, arg);
}
static int tiocttygstruct(struct tty_struct *tty, struct tty_struct *arg)
{
if (copy_to_user(arg, tty, sizeof(*arg)))
return -EFAULT;
return 0;
}
static int tiocsetd(struct tty_struct *tty, int *arg)
{
int ldisc;
if (get_user(ldisc, arg))
return -EFAULT;
return tty_set_ldisc(tty, ldisc);
}
static int send_break(struct tty_struct *tty, int duration)
{
set_current_state(TASK_INTERRUPTIBLE);
tty->driver.break_ctl(tty, -1);
if (!signal_pending(current))
schedule_timeout(duration);
tty->driver.break_ctl(tty, 0);
if (signal_pending(current))
return -EINTR;
return 0;
}
/*
* Split this up, as gcc can choke on it otherwise..
*/
int tty_ioctl(struct inode * inode, struct file * file,
unsigned int cmd, unsigned long arg)
{
struct tty_struct *tty, *real_tty;
int retval;
tty = (struct tty_struct *)file->private_data;
if (tty_paranoia_check(tty, inode->i_rdev, "tty_ioctl"))
return -EINVAL;
real_tty = tty;
if (tty->driver.type == TTY_DRIVER_TYPE_PTY &&
tty->driver.subtype == PTY_TYPE_MASTER)
real_tty = tty->link;
/*
* Break handling by driver
*/
if (!tty->driver.break_ctl) {
switch(cmd) {
case TIOCSBRK:
case TIOCCBRK:
if (tty->driver.ioctl)
return tty->driver.ioctl(tty, file, cmd, arg);
return -EINVAL;
/* These two ioctl's always return success; even if */
/* the driver doesn't support them. */
case TCSBRK:
case TCSBRKP:
if (!tty->driver.ioctl)
return 0;
retval = tty->driver.ioctl(tty, file, cmd, arg);
if (retval == -ENOIOCTLCMD)
retval = 0;
return retval;
}
}
/*
* Factor out some common prep work
*/
switch (cmd) {
case TIOCSETD:
case TIOCSBRK:
case TIOCCBRK:
case TCSBRK:
case TCSBRKP:
retval = tty_check_change(tty);
if (retval)
return retval;
if (cmd != TIOCCBRK) {
tty_wait_until_sent(tty, 0);
if (signal_pending(current))
return -EINTR;
}
break;
}
switch (cmd) {
case TIOCSTI:
return tiocsti(tty, (char *)arg);
case TIOCGWINSZ:
return tiocgwinsz(tty, (struct winsize *) arg);
case TIOCSWINSZ:
return tiocswinsz(tty, real_tty, (struct winsize *) arg);
case TIOCCONS:
return tioccons(inode, tty, real_tty);
case FIONBIO:
return fionbio(file, (int *) arg);
case TIOCEXCL:
set_bit(TTY_EXCLUSIVE, &tty->flags);
return 0;
case TIOCNXCL:
clear_bit(TTY_EXCLUSIVE, &tty->flags);
return 0;
case TIOCNOTTY:
if (current->tty != tty)
return -ENOTTY;
if (current->leader)
disassociate_ctty(0);
task_lock(current);
current->tty = NULL;
task_unlock(current);
return 0;
case TIOCSCTTY:
return tiocsctty(tty, arg);
case TIOCGPGRP:
return tiocgpgrp(tty, real_tty, (pid_t *) arg);
case TIOCSPGRP:
return tiocspgrp(tty, real_tty, (pid_t *) arg);
case TIOCGSID:
return tiocgsid(tty, real_tty, (pid_t *) arg);
case TIOCGETD:
return put_user(tty->ldisc.num, (int *) arg);
case TIOCSETD:
return tiocsetd(tty, (int *) arg);
#ifdef CONFIG_VT
case TIOCLINUX:
return tioclinux(tty, arg);
#endif
case TIOCTTYGSTRUCT:
return tiocttygstruct(tty, (struct tty_struct *) arg);
/*
* Break handling
*/
case TIOCSBRK: /* Turn break on, unconditionally */
tty->driver.break_ctl(tty, -1);
return 0;
case TIOCCBRK: /* Turn break off, unconditionally */
tty->driver.break_ctl(tty, 0);
return 0;
case TCSBRK: /* SVID version: non-zero arg --> no break */
/*
* XXX is the above comment correct, or the
* code below correct? Is this ioctl used at
* all by anyone?
*/
if (!arg)
return send_break(tty, HZ/4);
return 0;
case TCSBRKP: /* support for POSIX tcsendbreak() */
return send_break(tty, arg ? arg*(HZ/10) : HZ/4);
}
if (tty->driver.ioctl) {
int retval = (tty->driver.ioctl)(tty, file, cmd, arg);
if (retval != -ENOIOCTLCMD)
return retval;
}
if (tty->ldisc.ioctl) {
int retval = (tty->ldisc.ioctl)(tty, file, cmd, arg);
if (retval != -ENOIOCTLCMD)
return retval;
}
return -EINVAL;
}
/*
* This implements the "Secure Attention Key" --- the idea is to
* prevent trojan horses by killing all processes associated with this
* tty when the user hits the "Secure Attention Key". Required for
* super-paranoid applications --- see the Orange Book for more details.
*
* This code could be nicer; ideally it should send a HUP, wait a few
* seconds, then send a INT, and then a KILL signal. But you then
* have to coordinate with the init process, since all processes associated
* with the current tty must be dead before the new getty is allowed
* to spawn.
*
* Now, if it would be correct ;-/ The current code has a nasty hole -
* it doesn't catch files in flight. We may send the descriptor to ourselves
* via AF_UNIX socket, close it and later fetch from socket. FIXME.
*
* Nasty bug: do_SAK is being called in interrupt context. This can
* deadlock. We punt it up to process context. AKPM - 16Mar2001
*/
static void __do_SAK(void *arg)
{
#ifdef TTY_SOFT_SAK
tty_hangup(tty);
#else
struct tty_struct *tty = arg;
struct task_struct *p;
int session;
int i;
struct file *filp;
if (!tty)
return;
session = tty->session;
if (tty->ldisc.flush_buffer)
tty->ldisc.flush_buffer(tty);
if (tty->driver.flush_buffer)
tty->driver.flush_buffer(tty);
read_lock(&tasklist_lock);
for_each_task(p) {
if ((p->tty == tty) ||
((session > 0) && (p->session == session))) {
send_sig(SIGKILL, p, 1);
continue;
}
task_lock(p);
if (p->files) {
read_lock(&p->files->file_lock);
for (i=0; i < p->files->max_fds; i++) {
filp = fcheck_files(p->files, i);
if (filp && (filp->f_op == &tty_fops) &&
(filp->private_data == tty)) {
send_sig(SIGKILL, p, 1);
break;
}
}
read_unlock(&p->files->file_lock);
}
task_unlock(p);
}
read_unlock(&tasklist_lock);
#endif
}
/*
* The tq handling here is a little racy - tty->SAK_tq may already be queued.
* But there's no mechanism to fix that without futzing with tqueue_lock.
* Fortunately we don't need to worry, because if ->SAK_tq is already queued,
* the values which we write to it will be identical to the values which it
* already has. --akpm
*/
void do_SAK(struct tty_struct *tty)
{
if (!tty)
return;
PREPARE_TQUEUE(&tty->SAK_tq, __do_SAK, tty);
schedule_task(&tty->SAK_tq);
}
/*
* This routine is called out of the software interrupt to flush data
* from the flip buffer to the line discipline.
*/
static void flush_to_ldisc(void *private_)
{
struct tty_struct *tty = (struct tty_struct *) private_;
unsigned char *cp;
char *fp;
int count;
unsigned long flags;
if (test_bit(TTY_DONT_FLIP, &tty->flags)) {
queue_task(&tty->flip.tqueue, &tq_timer);
return;
}
if (tty->flip.buf_num) {
cp = tty->flip.char_buf + TTY_FLIPBUF_SIZE;
fp = tty->flip.flag_buf + TTY_FLIPBUF_SIZE;
tty->flip.buf_num = 0;
save_flags(flags); cli();
tty->flip.char_buf_ptr = tty->flip.char_buf;
tty->flip.flag_buf_ptr = tty->flip.flag_buf;
} else {
cp = tty->flip.char_buf;
fp = tty->flip.flag_buf;
tty->flip.buf_num = 1;
save_flags(flags); cli();
tty->flip.char_buf_ptr = tty->flip.char_buf + TTY_FLIPBUF_SIZE;
tty->flip.flag_buf_ptr = tty->flip.flag_buf + TTY_FLIPBUF_SIZE;
}
count = tty->flip.count;
tty->flip.count = 0;
restore_flags(flags);
tty->ldisc.receive_buf(tty, cp, fp, count);
}
/*
* Routine which returns the baud rate of the tty
*
* Note that the baud_table needs to be kept in sync with the
* include/asm/termbits.h file.
*/
static int baud_table[] = {
0, 50, 75, 110, 134, 150, 200, 300, 600, 1200, 1800, 2400, 4800,
9600, 19200, 38400, 57600, 115200, 230400, 460800,
#ifdef __sparc__
76800, 153600, 307200, 614400, 921600
#else
500000, 576000, 921600, 1000000, 1152000, 1500000, 2000000,
2500000, 3000000, 3500000, 4000000
#endif
};
static int n_baud_table = sizeof(baud_table)/sizeof(int);
int tty_get_baud_rate(struct tty_struct *tty)
{
unsigned int cflag, i;
cflag = tty->termios->c_cflag;
i = cflag & CBAUD;
if (i & CBAUDEX) {
i &= ~CBAUDEX;
if (i < 1 || i+15 >= n_baud_table)
tty->termios->c_cflag &= ~CBAUDEX;
else
i += 15;
}
if (i==15 && tty->alt_speed) {
if (!tty->warned) {
printk(KERN_WARNING "Use of setserial/setrocket to "
"set SPD_* flags is deprecated\n");
tty->warned = 1;
}
return(tty->alt_speed);
}
return baud_table[i];
}
void tty_flip_buffer_push(struct tty_struct *tty)
{
if (tty->low_latency)
flush_to_ldisc((void *) tty);
else
queue_task(&tty->flip.tqueue, &tq_timer);
}
/*
* This subroutine initializes a tty structure.
*/
static void initialize_tty_struct(struct tty_struct *tty)
{
memset(tty, 0, sizeof(struct tty_struct));
tty->magic = TTY_MAGIC;
tty->ldisc = ldiscs[N_TTY];
tty->pgrp = -1;
tty->flip.char_buf_ptr = tty->flip.char_buf;
tty->flip.flag_buf_ptr = tty->flip.flag_buf;
tty->flip.tqueue.routine = flush_to_ldisc;
tty->flip.tqueue.data = tty;
init_MUTEX(&tty->flip.pty_sem);
init_waitqueue_head(&tty->write_wait);
init_waitqueue_head(&tty->read_wait);
tty->tq_hangup.routine = do_tty_hangup;
tty->tq_hangup.data = tty;
sema_init(&tty->atomic_read, 1);
sema_init(&tty->atomic_write, 1);
spin_lock_init(&tty->read_lock);
INIT_LIST_HEAD(&tty->tty_files);
INIT_TQUEUE(&tty->SAK_tq, 0, 0);
}
/*
* The default put_char routine if the driver did not define one.
*/
void tty_default_put_char(struct tty_struct *tty, unsigned char ch)
{
tty->driver.write(tty, 0, &ch, 1);
}
/*
* Register a tty device described by <driver>, with minor number <minor>.
*/
void tty_register_devfs (struct tty_driver *driver, unsigned int flags, unsigned minor)
{
#ifdef CONFIG_DEVFS_FS
umode_t mode = S_IFCHR | S_IRUSR | S_IWUSR;
kdev_t device = MKDEV (driver->major, minor);
int idx = minor - driver->minor_start;
char buf[32];
switch (device) {
case TTY_DEV:
case PTMX_DEV:
mode |= S_IRGRP | S_IWGRP | S_IROTH | S_IWOTH;
break;
default:
if (driver->major == PTY_MASTER_MAJOR)
mode |= S_IRGRP | S_IWGRP | S_IROTH | S_IWOTH;
break;
}
if ( (minor < driver->minor_start) ||
(minor >= driver->minor_start + driver->num) ) {
printk(KERN_ERR "Attempt to register invalid minor number "
"with devfs (%d:%d).\n", (int)driver->major,(int)minor);
return;
}
# ifdef CONFIG_UNIX98_PTYS
if ( (driver->major >= UNIX98_PTY_SLAVE_MAJOR) &&
(driver->major < UNIX98_PTY_SLAVE_MAJOR + UNIX98_NR_MAJORS) )
flags |= DEVFS_FL_CURRENT_OWNER;
# endif
sprintf(buf, driver->name, idx + driver->name_base);
devfs_register (NULL, buf, flags | DEVFS_FL_DEFAULT,
driver->major, minor, mode, &tty_fops, NULL);
#endif /* CONFIG_DEVFS_FS */
}
void tty_unregister_devfs (struct tty_driver *driver, unsigned minor)
{
#ifdef CONFIG_DEVFS_FS
void * handle;
int idx = minor - driver->minor_start;
char buf[32];
sprintf(buf, driver->name, idx + driver->name_base);
handle = devfs_find_handle (NULL, buf, driver->major, minor,
DEVFS_SPECIAL_CHR, 0);
devfs_unregister (handle);
#endif /* CONFIG_DEVFS_FS */
}
EXPORT_SYMBOL(tty_register_devfs);
EXPORT_SYMBOL(tty_unregister_devfs);
/*
* Called by a tty driver to register itself.
*/
int tty_register_driver(struct tty_driver *driver)
{
int error;
int i;
if (driver->flags & TTY_DRIVER_INSTALLED)
return 0;
error = devfs_register_chrdev(driver->major, driver->name, &tty_fops);
if (error < 0)
return error;
else if(driver->major == 0)
driver->major = error;
if (!driver->put_char)
driver->put_char = tty_default_put_char;
driver->prev = 0;
driver->next = tty_drivers;
if (tty_drivers) tty_drivers->prev = driver;
tty_drivers = driver;
if ( !(driver->flags & TTY_DRIVER_NO_DEVFS) ) {
for(i = 0; i < driver->num; i++)
tty_register_devfs(driver, 0, driver->minor_start + i);
}
proc_tty_register_driver(driver);
return error;
}
/*
* Called by a tty driver to unregister itself.
*/
int tty_unregister_driver(struct tty_driver *driver)
{
int retval;
struct tty_driver *p;
int i, found = 0;
struct termios *tp;
const char *othername = NULL;
if (*driver->refcount)
return -EBUSY;
for (p = tty_drivers; p; p = p->next) {
if (p == driver)
found++;
else if (p->major == driver->major)
othername = p->name;
}
if (!found)
return -ENOENT;
if (othername == NULL) {
retval = devfs_unregister_chrdev(driver->major, driver->name);
if (retval)
return retval;
} else
devfs_register_chrdev(driver->major, othername, &tty_fops);
if (driver->prev)
driver->prev->next = driver->next;
else
tty_drivers = driver->next;
if (driver->next)
driver->next->prev = driver->prev;
/*
* Free the termios and termios_locked structures because
* we don't want to get memory leaks when modular tty
* drivers are removed from the kernel.
*/
for (i = 0; i < driver->num; i++) {
tp = driver->termios[i];
if (tp) {
driver->termios[i] = NULL;
kfree(tp);
}
tp = driver->termios_locked[i];
if (tp) {
driver->termios_locked[i] = NULL;
kfree(tp);
}
tty_unregister_devfs(driver, driver->minor_start + i);
}
proc_tty_unregister_driver(driver);
return 0;
}
/*
* Initialize the console device. This is called *early*, so
* we can't necessarily depend on lots of kernel help here.
* Just do some early initializations, and do the complex setup
* later.
*/
void __init console_init(void)
{
/* Setup the default TTY line discipline. */
memset(ldiscs, 0, sizeof(ldiscs));
(void) tty_register_ldisc(N_TTY, &tty_ldisc_N_TTY);
/*
* Set up the standard termios. Individual tty drivers may
* deviate from this; this is used as a template.
*/
memset(&tty_std_termios, 0, sizeof(struct termios));
memcpy(tty_std_termios.c_cc, INIT_C_CC, NCCS);
tty_std_termios.c_iflag = ICRNL | IXON;
tty_std_termios.c_oflag = OPOST | ONLCR;
tty_std_termios.c_cflag = B38400 | CS8 | CREAD | HUPCL;
tty_std_termios.c_lflag = ISIG | ICANON | ECHO | ECHOE | ECHOK |
ECHOCTL | ECHOKE | IEXTEN;
/*
* set up the console device so that later boot sequences can
* inform about problems etc..
*/
#ifdef CONFIG_VT
con_init();
#endif
#ifdef CONFIG_AU1000_SERIAL_CONSOLE
au1000_serial_console_init();
#endif
#ifdef CONFIG_SERIAL_CONSOLE
#if (defined(CONFIG_8xx) || defined(CONFIG_8260))
console_8xx_init();
#elif defined(CONFIG_MAC_SERIAL) && defined(CONFIG_SERIAL)
if (_machine == _MACH_Pmac)
mac_scc_console_init();
else
serial_console_init();
#elif defined(CONFIG_MAC_SERIAL)
mac_scc_console_init();
#elif defined(CONFIG_PARISC)
pdc_console_init();
#elif defined(CONFIG_SERIAL)
serial_console_init();
#endif /* CONFIG_8xx */
#ifdef CONFIG_SGI_SERIAL
sgi_serial_console_init();
#endif
#if defined(CONFIG_MVME162_SCC) || defined(CONFIG_BVME6000_SCC) || defined(CONFIG_MVME147_SCC)
vme_scc_console_init();
#endif
#if defined(CONFIG_SERIAL167)
serial167_console_init();
#endif
#if defined(CONFIG_SH_SCI)
sci_console_init();
#endif
#endif
#ifdef CONFIG_TN3270_CONSOLE
tub3270_con_init();
#endif
#ifdef CONFIG_TN3215
con3215_init();
#endif
#ifdef CONFIG_HWC
hwc_console_init();
#endif
#ifdef CONFIG_STDIO_CONSOLE
stdio_console_init();
#endif
#ifdef CONFIG_SERIAL_21285_CONSOLE
rs285_console_init();
#endif
#ifdef CONFIG_SERIAL_SA1100_CONSOLE
sa1100_rs_console_init();
#endif
#ifdef CONFIG_ARC_CONSOLE
arc_console_init();
#endif
#ifdef CONFIG_SERIAL_AMBA_CONSOLE
ambauart_console_init();
#endif
#ifdef CONFIG_SERIAL_TX3912_CONSOLE
tx3912_console_init();
#endif
}
static struct tty_driver dev_tty_driver, dev_syscons_driver;
#ifdef CONFIG_UNIX98_PTYS
static struct tty_driver dev_ptmx_driver;
#endif
#ifdef CONFIG_VT
static struct tty_driver dev_console_driver;
#endif
/*
* Ok, now we can initialize the rest of the tty devices and can count
* on memory allocations, interrupts etc..
*/
void __init tty_init(void)
{
/*
* dev_tty_driver and dev_console_driver are actually magic
* devices which get redirected at open time. Nevertheless,
* we register them so that register_chrdev is called
* appropriately.
*/
memset(&dev_tty_driver, 0, sizeof(struct tty_driver));
dev_tty_driver.magic = TTY_DRIVER_MAGIC;
dev_tty_driver.driver_name = "/dev/tty";
dev_tty_driver.name = dev_tty_driver.driver_name + 5;
dev_tty_driver.name_base = 0;
dev_tty_driver.major = TTYAUX_MAJOR;
dev_tty_driver.minor_start = 0;
dev_tty_driver.num = 1;
dev_tty_driver.type = TTY_DRIVER_TYPE_SYSTEM;
dev_tty_driver.subtype = SYSTEM_TYPE_TTY;
if (tty_register_driver(&dev_tty_driver))
panic("Couldn't register /dev/tty driver\n");
dev_syscons_driver = dev_tty_driver;
dev_syscons_driver.driver_name = "/dev/console";
dev_syscons_driver.name = dev_syscons_driver.driver_name + 5;
dev_syscons_driver.major = TTYAUX_MAJOR;
dev_syscons_driver.minor_start = 1;
dev_syscons_driver.type = TTY_DRIVER_TYPE_SYSTEM;
dev_syscons_driver.subtype = SYSTEM_TYPE_SYSCONS;
if (tty_register_driver(&dev_syscons_driver))
panic("Couldn't register /dev/console driver\n");
/* console calls tty_register_driver() before kmalloc() works.
* Thus, we can't devfs_register() then. Do so now, instead.
*/
#ifdef CONFIG_VT
con_init_devfs();
#endif
#ifdef CONFIG_UNIX98_PTYS
dev_ptmx_driver = dev_tty_driver;
dev_ptmx_driver.driver_name = "/dev/ptmx";
dev_ptmx_driver.name = dev_ptmx_driver.driver_name + 5;
dev_ptmx_driver.major= MAJOR(PTMX_DEV);
dev_ptmx_driver.minor_start = MINOR(PTMX_DEV);
dev_ptmx_driver.type = TTY_DRIVER_TYPE_SYSTEM;
dev_ptmx_driver.subtype = SYSTEM_TYPE_SYSPTMX;
if (tty_register_driver(&dev_ptmx_driver))
panic("Couldn't register /dev/ptmx driver\n");
#endif
#ifdef CONFIG_VT
dev_console_driver = dev_tty_driver;
dev_console_driver.driver_name = "/dev/vc/0";
dev_console_driver.name = dev_console_driver.driver_name + 5;
dev_console_driver.major = TTY_MAJOR;
dev_console_driver.type = TTY_DRIVER_TYPE_SYSTEM;
dev_console_driver.subtype = SYSTEM_TYPE_CONSOLE;
if (tty_register_driver(&dev_console_driver))
panic("Couldn't register /dev/tty0 driver\n");
kbd_init();
#endif
#ifdef CONFIG_ESPSERIAL /* init ESP before rs, so rs doesn't see the port */
espserial_init();
#endif
#if defined(CONFIG_MVME162_SCC) || defined(CONFIG_BVME6000_SCC) || defined(CONFIG_MVME147_SCC)
vme_scc_init();
#endif
#ifdef CONFIG_SERIAL_TX3912
tx3912_rs_init();
#endif
#ifdef CONFIG_ROCKETPORT
rp_init();
#endif
#ifdef CONFIG_SERIAL167
serial167_init();
#endif
#ifdef CONFIG_CYCLADES
cy_init();
#endif
#ifdef CONFIG_STALLION
stl_init();
#endif
#ifdef CONFIG_ISTALLION
stli_init();
#endif
#ifdef CONFIG_DIGI
pcxe_init();
#endif
#ifdef CONFIG_DIGIEPCA
pc_init();
#endif
#ifdef CONFIG_SPECIALIX
specialix_init();
#endif
#if (defined(CONFIG_8xx) || defined(CONFIG_8260))
rs_8xx_init();
#endif /* CONFIG_8xx */
pty_init();
#ifdef CONFIG_MOXA_SMARTIO
mxser_init();
#endif
#ifdef CONFIG_MOXA_INTELLIO
moxa_init();
#endif
#ifdef CONFIG_VT
vcs_init();
#endif
#ifdef CONFIG_TN3270
tub3270_init();
#endif
#ifdef CONFIG_TN3215
tty3215_init();
#endif
#ifdef CONFIG_HWC
hwc_tty_init();
#endif
#ifdef CONFIG_A2232
a2232board_init();
#endif
}
|