Viewing file:  mixcomwd.c (5.64 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* MixCom Watchdog: A Simple Hardware Watchdog Device
* Based on Softdog driver by Alan Cox and PC Watchdog driver by Ken Hollis
*
* Author: Gergely Madarasz <gorgo@itc.hu>
*
* Copyright (c) 1999 ITConsult-Pro Co. <info@itc.hu>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* as published by the Free Software Foundation; either version
* 2 of the License, or (at your option) any later version.
*
* Version 0.1 (99/04/15):
* - first version
*
* Version 0.2 (99/06/16):
* - added kernel timer watchdog ping after close
* since the hardware does not support watchdog shutdown
*
* Version 0.3 (99/06/21):
* - added WDIOC_GETSTATUS and WDIOC_GETSUPPORT ioctl calls
*
* Version 0.3.1 (99/06/22):
* - allow module removal while internal timer is active,
* print warning about probable reset
*
* Version 0.4 (99/11/15):
* - support for one more type board
*
*/
#define VERSION "0.4"
#include <linux/module.h>
#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/fs.h>
#include <linux/mm.h>
#include <linux/miscdevice.h>
#include <linux/ioport.h>
#include <linux/watchdog.h>
#include <linux/reboot.h>
#include <linux/init.h>
#include <linux/smp_lock.h>
#include <asm/uaccess.h>
#include <asm/io.h>
static int mixcomwd_ioports[] = { 0x180, 0x280, 0x380, 0x000 };
#define MIXCOM_WATCHDOG_OFFSET 0xc10
#define MIXCOM_ID 0x11
#define FLASHCOM_WATCHDOG_OFFSET 0x4
#define FLASHCOM_ID 0x18
static long mixcomwd_opened; /* long req'd for setbit --RR */
static int watchdog_port;
#ifndef CONFIG_WATCHDOG_NOWAYOUT
static int mixcomwd_timer_alive;
static struct timer_list mixcomwd_timer;
#endif
static void mixcomwd_ping(void)
{
outb_p(55,watchdog_port);
return;
}
#ifndef CONFIG_WATCHDOG_NOWAYOUT
static void mixcomwd_timerfun(unsigned long d)
{
mixcomwd_ping();
mod_timer(&mixcomwd_timer,jiffies+ 5*HZ);
}
#endif
/*
* Allow only one person to hold it open
*/
static int mixcomwd_open(struct inode *inode, struct file *file)
{
if(test_and_set_bit(0,&mixcomwd_opened)) {
return -EBUSY;
}
mixcomwd_ping();
#ifndef CONFIG_WATCHDOG_NOWAYOUT
if(mixcomwd_timer_alive) {
del_timer(&mixcomwd_timer);
mixcomwd_timer_alive=0;
}
#endif
return 0;
}
static int mixcomwd_release(struct inode *inode, struct file *file)
{
lock_kernel();
#ifndef CONFIG_WATCHDOG_NOWAYOUT
if(mixcomwd_timer_alive) {
printk(KERN_ERR "mixcomwd: release called while internal timer alive");
unlock_kernel();
return -EBUSY;
}
init_timer(&mixcomwd_timer);
mixcomwd_timer.expires=jiffies + 5 * HZ;
mixcomwd_timer.function=mixcomwd_timerfun;
mixcomwd_timer.data=0;
mixcomwd_timer_alive=1;
add_timer(&mixcomwd_timer);
#endif
clear_bit(0,&mixcomwd_opened);
unlock_kernel();
return 0;
}
static ssize_t mixcomwd_write(struct file *file, const char *data, size_t len, loff_t *ppos)
{
if (ppos != &file->f_pos) {
return -ESPIPE;
}
if(len)
{
mixcomwd_ping();
return 1;
}
return 0;
}
static int mixcomwd_ioctl(struct inode *inode, struct file *file,
unsigned int cmd, unsigned long arg)
{
int status;
static struct watchdog_info ident = {
WDIOF_KEEPALIVEPING, 1, "MixCOM watchdog"
};
switch(cmd)
{
case WDIOC_GETSTATUS:
status=mixcomwd_opened;
#ifndef CONFIG_WATCHDOG_NOWAYOUT
status|=mixcomwd_timer_alive;
#endif
if (copy_to_user((int *)arg, &status, sizeof(int))) {
return -EFAULT;
}
break;
case WDIOC_GETSUPPORT:
if (copy_to_user((struct watchdog_info *)arg, &ident,
sizeof(ident))) {
return -EFAULT;
}
break;
case WDIOC_KEEPALIVE:
mixcomwd_ping();
break;
default:
return -ENOTTY;
}
return 0;
}
static struct file_operations mixcomwd_fops=
{
owner: THIS_MODULE,
write: mixcomwd_write,
ioctl: mixcomwd_ioctl,
open: mixcomwd_open,
release: mixcomwd_release,
};
static struct miscdevice mixcomwd_miscdev=
{
WATCHDOG_MINOR,
"watchdog",
&mixcomwd_fops
};
static int __init mixcomwd_checkcard(int port)
{
int id;
if(check_region(port+MIXCOM_WATCHDOG_OFFSET,1)) {
return 0;
}
id=inb_p(port + MIXCOM_WATCHDOG_OFFSET) & 0x3f;
if(id!=MIXCOM_ID) {
return 0;
}
return 1;
}
static int __init flashcom_checkcard(int port)
{
int id;
if(check_region(port + FLASHCOM_WATCHDOG_OFFSET,1)) {
return 0;
}
id=inb_p(port + FLASHCOM_WATCHDOG_OFFSET);
if(id!=FLASHCOM_ID) {
return 0;
}
return 1;
}
static int __init mixcomwd_init(void)
{
int i;
int ret;
int found=0;
for (i = 0; !found && mixcomwd_ioports[i] != 0; i++) {
if (mixcomwd_checkcard(mixcomwd_ioports[i])) {
found = 1;
watchdog_port = mixcomwd_ioports[i] + MIXCOM_WATCHDOG_OFFSET;
}
}
/* The FlashCOM card can be set up at 0x300 -> 0x378, in 0x8 jumps */
for (i = 0x300; !found && i < 0x380; i+=0x8) {
if (flashcom_checkcard(i)) {
found = 1;
watchdog_port = i + FLASHCOM_WATCHDOG_OFFSET;
}
}
if (!found) {
printk("mixcomwd: No card detected, or port not available.\n");
return -ENODEV;
}
request_region(watchdog_port,1,"MixCOM watchdog");
ret = misc_register(&mixcomwd_miscdev);
if (ret)
return ret;
printk(KERN_INFO "MixCOM watchdog driver v%s, watchdog port at 0x%3x\n",VERSION,watchdog_port);
return 0;
}
static void __exit mixcomwd_exit(void)
{
#ifndef CONFIG_WATCHDOG_NOWAYOUT
if(mixcomwd_timer_alive) {
printk(KERN_WARNING "mixcomwd: I quit now, hardware will"
" probably reboot!\n");
del_timer(&mixcomwd_timer);
mixcomwd_timer_alive=0;
}
#endif
release_region(watchdog_port,1);
misc_deregister(&mixcomwd_miscdev);
}
module_init(mixcomwd_init);
module_exit(mixcomwd_exit);
MODULE_LICENSE("GPL");
EXPORT_NO_SYMBOLS;
|