Viewing file:  adbmouse.c (5.31 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* Macintosh ADB Mouse driver for Linux
*
* 27 Oct 1997 Michael Schmitz
* logitech fixes by anthony tong
* further hacking by Paul Mackerras
*
* Apple mouse protocol according to:
*
* Device code shamelessly stolen from:
*/
/*
* Atari Mouse Driver for Linux
* by Robert de Vries (robert@and.nl) 19Jul93
*
* 16 Nov 1994 Andreas Schwab
* Compatibility with busmouse
* Support for three button mouse (shamelessly stolen from MiNT)
* third button wired to one of the joystick directions on joystick 1
*
* 1996/02/11 Andreas Schwab
* Module support
* Allow multiple open's
*
* Converted to use new generic busmouse code. 11 July 1998
* Russell King <rmk@arm.uk.linux.org>
*/
#include <linux/module.h>
#include <linux/sched.h>
#include <linux/errno.h>
#include <linux/miscdevice.h>
#include <linux/mm.h>
#include <linux/random.h>
#include <linux/poll.h>
#include <linux/init.h>
#include <linux/adb_mouse.h>
#ifdef __powerpc__
#include <asm/processor.h>
#endif
#if defined(__mc68000__) || defined(MODULE)
#include <asm/setup.h>
#endif
#include "busmouse.h"
static int msedev;
static unsigned char adb_mouse_buttons[16];
extern void (*adb_mouse_interrupt_hook)(unsigned char *, int);
extern int adb_emulate_buttons;
extern int adb_button2_keycode;
extern int adb_button3_keycode;
/*
* XXX: need to figure out what ADB mouse packets mean ...
* This is the stuff stolen from the Atari driver ...
*/
static void adb_mouse_interrupt(unsigned char *buf, int nb)
{
int buttons, id;
char dx, dy;
/*
Handler 1 -- 100cpi original Apple mouse protocol.
Handler 2 -- 200cpi original Apple mouse protocol.
For Apple's standard one-button mouse protocol the data array will
contain the following values:
BITS COMMENTS
data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd.
data[1] = bxxx xxxx First button and x-axis motion.
data[2] = byyy yyyy Second button and y-axis motion.
Handler 4 -- Apple Extended mouse protocol.
For Apple's 3-button mouse protocol the data array will contain the
following values:
BITS COMMENTS
data[0] = dddd 1100 ADB command: Talk, register 0, for device dddd.
data[1] = bxxx xxxx Left button and x-axis motion.
data[2] = byyy yyyy Second button and y-axis motion.
data[3] = byyy bxxx Third button and fourth button.
Y is additiona. high bits of y-axis motion.
X is additional high bits of x-axis motion.
'buttons' here means 'button down' states!
Button 1 (left) : bit 2, busmouse button 3
Button 2 (right) : bit 0, busmouse button 1
Button 3 (middle): bit 1, busmouse button 2
*/
/* x/y and buttons swapped */
id = (buf[0] >> 4) & 0xf;
buttons = adb_mouse_buttons[id];
/* button 1 (left, bit 2) */
buttons = (buttons & 3) | (buf[1] & 0x80 ? 4 : 0); /* 1+2 unchanged */
/* button 2 (middle) */
buttons = (buttons & 5) | (buf[2] & 0x80 ? 2 : 0); /* 2+3 unchanged */
/* button 3 (right) present?
* on a logitech mouseman, the right and mid buttons sometimes behave
* strangely until they both have been pressed after booting. */
/* data valid only if extended mouse format ! */
if (nb >= 4)
buttons = (buttons & 6) | (buf[3] & 0x80 ? 1 : 0); /* 1+3 unchanged */
adb_mouse_buttons[id] = buttons;
/* a button is down if it is down on any mouse */
for (id = 0; id < 16; ++id)
buttons &= adb_mouse_buttons[id];
dx = ((buf[2] & 0x7f) < 64 ? (buf[2] & 0x7f) : (buf[2] & 0x7f) - 128);
dy = ((buf[1] & 0x7f) < 64 ? (buf[1] & 0x7f) : (buf[1] & 0x7f) - 128);
busmouse_add_movementbuttons(msedev, dx, -dy, buttons);
if (console_loglevel >= 8)
printk(" %X %X %X dx %d dy %d \n",
buf[1], buf[2], buf[3], dx, dy);
}
static int release_mouse(struct inode *inode, struct file *file)
{
adb_mouse_interrupt_hook = NULL;
/*
* FIXME?: adb_mouse_interrupt_hook may still be executing
* on another CPU.
*/
return 0;
}
static int open_mouse(struct inode *inode, struct file *file)
{
adb_mouse_interrupt_hook = adb_mouse_interrupt;
return 0;
}
static struct busmouse adb_mouse =
{
ADB_MOUSE_MINOR, "adbmouse", THIS_MODULE, open_mouse, release_mouse, 7
};
static int __init adb_mouse_init(void)
{
#ifdef __powerpc__
if ((_machine != _MACH_chrp) && (_machine != _MACH_Pmac))
return -ENODEV;
#endif
#ifdef __mc68000__
if (!MACH_IS_MAC)
return -ENODEV;
#endif
/* all buttons up */
memset(adb_mouse_buttons, 7, sizeof(adb_mouse_buttons));
msedev = register_busmouse(&adb_mouse);
if (msedev < 0)
printk(KERN_WARNING "Unable to register ADB mouse driver.\n");
else
printk(KERN_INFO "Macintosh ADB mouse driver installed.\n");
return msedev < 0 ? msedev : 0;
}
#ifndef MODULE
/*
* XXX this function is misnamed.
* It is called if the kernel is booted with the adb_buttons=xxx
* option, which is about using ADB keyboard buttons to emulate
* mouse buttons. -- paulus
*/
static int __init adb_mouse_setup(char *str)
{
int ints[4];
str = get_options(str, ARRAY_SIZE(ints), ints);
if (ints[0] >= 1) {
adb_emulate_buttons = ints[1];
if (ints[0] >= 2)
adb_button2_keycode = ints[2];
if (ints[0] >= 3)
adb_button3_keycode = ints[3];
}
return 1;
}
__setup("adb_buttons=", adb_mouse_setup);
#endif /* !MODULE */
static void __exit adb_mouse_cleanup(void)
{
unregister_busmouse(msedev);
}
module_init(adb_mouse_init);
module_exit(adb_mouse_cleanup);
MODULE_LICENSE("GPL");
|