Viewing file:  board.h (3.71 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
** -----------------------------------------------------------------------------
**
** Perle Specialix driver for Linux
** Ported from existing RIO Driver for SCO sources.
*
* (C) 1990 - 2000 Specialix International Ltd., Byfleet, Surrey, UK.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
**
** Module : board.h
** SID : 1.2
** Last Modified : 11/6/98 11:34:07
** Retrieved : 11/6/98 11:34:20
**
** ident @(#)board.h 1.2
**
** -----------------------------------------------------------------------------
*/
#ifndef __rio_board_h__
#define __rio_board_h__
#ifdef SCCS_LABELS
static char *_board_h_sccs_ = "@(#)board.h 1.2";
#endif
/*
** board.h contains the definitions for the *hardware* of the host cards.
** It describes the memory overlay for the dual port RAM area.
*/
#define DP_SRAM1_SIZE 0x7C00
#define DP_SRAM2_SIZE 0x0200
#define DP_SRAM3_SIZE 0x7000
#define DP_SCRATCH_SIZE 0x1000
#define DP_PARMMAP_ADDR 0x01FE /* offset into SRAM2 */
#define DP_STARTUP_ADDR 0x01F8 /* offset into SRAM2 */
/*
** The shape of the Host Control area, at offset 0x7C00, Write Only
*/
struct s_Ctrl
{
BYTE DpCtl; /* 7C00 */
BYTE Dp_Unused2_[127];
BYTE DpIntSet; /* 7C80 */
BYTE Dp_Unused3_[127];
BYTE DpTpuReset; /* 7D00 */
BYTE Dp_Unused4_[127];
BYTE DpIntReset; /* 7D80 */
BYTE Dp_Unused5_[127];
};
/*
** The PROM data area on the host (0x7C00), Read Only
*/
struct s_Prom
{
WORD DpSlxCode[2];
WORD DpRev;
WORD Dp_Unused6_;
WORD DpUniq[4];
WORD DpJahre;
WORD DpWoche;
WORD DpHwFeature[5];
WORD DpOemId;
WORD DpSiggy[16];
};
/*
** Union of the Ctrl and Prom areas
*/
union u_CtrlProm /* This is the control/PROM area (0x7C00) */
{
struct s_Ctrl DpCtrl;
struct s_Prom DpProm;
};
/*
** The top end of memory!
*/
struct s_ParmMapS /* Area containing Parm Map Pointer */
{
BYTE Dp_Unused8_[DP_PARMMAP_ADDR];
WORD DpParmMapAd;
};
struct s_StartUpS
{
BYTE Dp_Unused9_[DP_STARTUP_ADDR];
BYTE Dp_LongJump[0x4];
BYTE Dp_Unused10_[2];
BYTE Dp_ShortJump[0x2];
};
union u_Sram2ParmMap /* This is the top of memory (0x7E00-0x7FFF) */
{
BYTE DpSramMem[DP_SRAM2_SIZE];
struct s_ParmMapS DpParmMapS;
struct s_StartUpS DpStartUpS;
};
/*
** This is the DP RAM overlay.
*/
struct DpRam
{
BYTE DpSram1[DP_SRAM1_SIZE]; /* 0000 - 7BFF */
union u_CtrlProm DpCtrlProm; /* 7C00 - 7DFF */
union u_Sram2ParmMap DpSram2ParmMap; /* 7E00 - 7FFF */
BYTE DpScratch[DP_SCRATCH_SIZE]; /* 8000 - 8FFF */
BYTE DpSram3[DP_SRAM3_SIZE]; /* 9000 - FFFF */
};
#define DpControl DpCtrlProm.DpCtrl.DpCtl
#define DpSetInt DpCtrlProm.DpCtrl.DpIntSet
#define DpResetTpu DpCtrlProm.DpCtrl.DpTpuReset
#define DpResetInt DpCtrlProm.DpCtrl.DpIntReset
#define DpSlx DpCtrlProm.DpProm.DpSlxCode
#define DpRevision DpCtrlProm.DpProm.DpRev
#define DpUnique DpCtrlProm.DpProm.DpUniq
#define DpYear DpCtrlProm.DpProm.DpJahre
#define DpWeek DpCtrlProm.DpProm.DpWoche
#define DpSignature DpCtrlProm.DpProm.DpSiggy
#define DpParmMapR DpSram2ParmMap.DpParmMapS.DpParmMapAd
#define DpSram2 DpSram2ParmMap.DpSramMem
#endif
|