Viewing file:  elevator.c (5.56 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* linux/drivers/block/elevator.c
*
* Block device elevator/IO-scheduler.
*
* Copyright (C) 2000 Andrea Arcangeli <andrea@suse.de> SuSE
*
* 30042000 Jens Axboe <axboe@suse.de> :
*
* Split the elevator a bit so that it is possible to choose a different
* one or even write a new "plug in". There are three pieces:
* - elevator_fn, inserts a new request in the queue list
* - elevator_merge_fn, decides whether a new buffer can be merged with
* an existing request
* - elevator_dequeue_fn, called when a request is taken off the active list
*
* 20082000 Dave Jones <davej@suse.de> :
* Removed tests for max-bomb-segments, which was breaking elvtune
* when run without -bN
*
*/
#include <linux/fs.h>
#include <linux/blkdev.h>
#include <linux/elevator.h>
#include <linux/blk.h>
#include <linux/module.h>
#include <asm/uaccess.h>
/*
* This is a bit tricky. It's given that bh and rq are for the same
* device, but the next request might of course not be. Run through
* the tests below to check if we want to insert here if we can't merge
* bh into an existing request
*/
inline int bh_rq_in_between(struct buffer_head *bh, struct request *rq,
struct list_head *head)
{
struct list_head *next;
struct request *next_rq;
next = rq->queue.next;
if (next == head)
return 0;
/*
* if the device is different (usually on a different partition),
* just check if bh is after rq
*/
next_rq = blkdev_entry_to_request(next);
if (next_rq->rq_dev != rq->rq_dev)
return bh->b_rsector > rq->sector;
/*
* ok, rq, next_rq and bh are on the same device. if bh is in between
* the two, this is the sweet spot
*/
if (bh->b_rsector < next_rq->sector && bh->b_rsector > rq->sector)
return 1;
/*
* next_rq is ordered wrt rq, but bh is not in between the two
*/
if (next_rq->sector > rq->sector)
return 0;
/*
* next_rq and rq not ordered, if we happen to be either before
* next_rq or after rq insert here anyway
*/
if (bh->b_rsector > rq->sector || bh->b_rsector < next_rq->sector)
return 1;
return 0;
}
int elevator_linus_merge(request_queue_t *q, struct request **req,
struct list_head * head,
struct buffer_head *bh, int rw,
int max_sectors)
{
struct list_head *entry = &q->queue_head;
unsigned int count = bh->b_size >> 9, ret = ELEVATOR_NO_MERGE;
while ((entry = entry->prev) != head) {
struct request *__rq = blkdev_entry_to_request(entry);
/*
* simply "aging" of requests in queue
*/
if (__rq->elevator_sequence-- <= 0)
break;
if (__rq->waiting)
continue;
if (__rq->rq_dev != bh->b_rdev)
continue;
if (!*req && bh_rq_in_between(bh, __rq, &q->queue_head))
*req = __rq;
if (__rq->cmd != rw)
continue;
if (__rq->nr_sectors + count > max_sectors)
continue;
if (__rq->elevator_sequence < count)
break;
if (__rq->sector + __rq->nr_sectors == bh->b_rsector) {
ret = ELEVATOR_BACK_MERGE;
*req = __rq;
break;
} else if (__rq->sector - count == bh->b_rsector) {
ret = ELEVATOR_FRONT_MERGE;
__rq->elevator_sequence -= count;
*req = __rq;
break;
}
}
return ret;
}
void elevator_linus_merge_cleanup(request_queue_t *q, struct request *req, int count)
{
struct list_head *entry = &req->queue, *head = &q->queue_head;
/*
* second pass scan of requests that got passed over, if any
*/
while ((entry = entry->next) != head) {
struct request *tmp = blkdev_entry_to_request(entry);
tmp->elevator_sequence -= count;
}
}
void elevator_linus_merge_req(struct request *req, struct request *next)
{
if (next->elevator_sequence < req->elevator_sequence)
req->elevator_sequence = next->elevator_sequence;
}
/*
* See if we can find a request that this buffer can be coalesced with.
*/
int elevator_noop_merge(request_queue_t *q, struct request **req,
struct list_head * head,
struct buffer_head *bh, int rw,
int max_sectors)
{
struct list_head *entry;
unsigned int count = bh->b_size >> 9;
if (list_empty(&q->queue_head))
return ELEVATOR_NO_MERGE;
entry = &q->queue_head;
while ((entry = entry->prev) != head) {
struct request *__rq = blkdev_entry_to_request(entry);
if (__rq->cmd != rw)
continue;
if (__rq->rq_dev != bh->b_rdev)
continue;
if (__rq->nr_sectors + count > max_sectors)
continue;
if (__rq->waiting)
continue;
if (__rq->sector + __rq->nr_sectors == bh->b_rsector) {
*req = __rq;
return ELEVATOR_BACK_MERGE;
} else if (__rq->sector - count == bh->b_rsector) {
*req = __rq;
return ELEVATOR_FRONT_MERGE;
}
}
*req = blkdev_entry_to_request(q->queue_head.prev);
return ELEVATOR_NO_MERGE;
}
void elevator_noop_merge_cleanup(request_queue_t *q, struct request *req, int count) {}
void elevator_noop_merge_req(struct request *req, struct request *next) {}
int blkelvget_ioctl(elevator_t * elevator, blkelv_ioctl_arg_t * arg)
{
blkelv_ioctl_arg_t output;
output.queue_ID = elevator->queue_ID;
output.read_latency = elevator->read_latency;
output.write_latency = elevator->write_latency;
output.max_bomb_segments = 0;
if (copy_to_user(arg, &output, sizeof(blkelv_ioctl_arg_t)))
return -EFAULT;
return 0;
}
int blkelvset_ioctl(elevator_t * elevator, const blkelv_ioctl_arg_t * arg)
{
blkelv_ioctl_arg_t input;
if (copy_from_user(&input, arg, sizeof(blkelv_ioctl_arg_t)))
return -EFAULT;
if (input.read_latency < 0)
return -EINVAL;
if (input.write_latency < 0)
return -EINVAL;
elevator->read_latency = input.read_latency;
elevator->write_latency = input.write_latency;
return 0;
}
void elevator_init(elevator_t * elevator, elevator_t type)
{
static unsigned int queue_ID;
*elevator = type;
elevator->queue_ID = queue_ID++;
}
|