!C99Shell v. 1.0 pre-release build #13!

Software: Apache/2.0.54 (Unix) mod_perl/1.99_09 Perl/v5.8.0 mod_ssl/2.0.54 OpenSSL/0.9.7l DAV/2 FrontPage/5.0.2.2635 PHP/4.4.0 mod_gzip/2.0.26.1a 

uname -a: Linux snow.he.net 4.4.276-v2-mono-1 #1 SMP Wed Jul 21 11:21:17 PDT 2021 i686 

uid=99(nobody) gid=98(nobody) groups=98(nobody) 

Safe-mode: OFF (not secure)

/usr/src/linux-2.4.18-xfs-1.1/drivers/block/paride/   drwxr-xr-x
Free 318.36 GB of 458.09 GB (69.5%)
Home    Back    Forward    UPDIR    Refresh    Search    Buffer    Encoder    Tools    Proc.    FTP brute    Sec.    SQL    PHP-code    Update    Feedback    Self remove    Logout    


Viewing file:     pcd.c (24.09 KB)      -rw-r--r--
Select action/file-type:
(+) | (+) | (+) | Code (+) | Session (+) | (+) | SDB (+) | (+) | (+) | (+) | (+) | (+) |
/* 
    pcd.c    (c) 1997-8  Grant R. Guenther <grant@torque.net>
                    Under the terms of the GNU General Public License.

    This is a high-level driver for parallel port ATAPI CD-ROM
        drives based on chips supported by the paride module.

        By default, the driver will autoprobe for a single parallel
        port ATAPI CD-ROM drive, but if their individual parameters are
        specified, the driver can handle up to 4 drives.

        The behaviour of the pcd driver can be altered by setting
        some parameters from the insmod command line.  The following
        parameters are adjustable:

            drive0      These four arguments can be arrays of       
            drive1      1-6 integers as follows:
            drive2
            drive3      <prt>,<pro>,<uni>,<mod>,<slv>,<dly>

                        Where,

                <prt>   is the base of the parallel port address for
                        the corresponding drive.  (required)

                <pro>   is the protocol number for the adapter that
                        supports this drive.  These numbers are
                        logged by 'paride' when the protocol modules
                        are initialised.  (0 if not given)

                <uni>   for those adapters that support chained
                        devices, this is the unit selector for the
                        chain of devices on the given port.  It should
                        be zero for devices that don't support chaining.
                        (0 if not given)

                <mod>   this can be -1 to choose the best mode, or one
                        of the mode numbers supported by the adapter.
                        (-1 if not given)

        <slv>   ATAPI CD-ROMs can be jumpered to master or slave.
            Set this to 0 to choose the master drive, 1 to
                        choose the slave, -1 (the default) to choose the
            first drive found.

                <dly>   some parallel ports require the driver to 
                        go more slowly.  -1 sets a default value that
                        should work with the chosen protocol.  Otherwise,
                        set this to a small integer, the larger it is
                        the slower the port i/o.  In some cases, setting
                        this to zero will speed up the device. (default -1)
                        
            major       You may use this parameter to overide the
                        default major number (46) that this driver
                        will use.  Be sure to change the device
                        name as well.

            name        This parameter is a character string that
                        contains the name the kernel will use for this
                        device (in /proc output, for instance).
                        (default "pcd")

            verbose     This parameter controls the amount of logging
                        that the driver will do.  Set it to 0 for
                        normal operation, 1 to see autoprobe progress
                        messages, or 2 to see additional debugging
                        output.  (default 0)
  
            nice        This parameter controls the driver's use of
                        idle CPU time, at the expense of some speed.
 
    If this driver is built into the kernel, you can use kernel
        the following command line parameters, with the same values
        as the corresponding module parameters listed above:

        pcd.drive0
        pcd.drive1
        pcd.drive2
        pcd.drive3
        pcd.nice

        In addition, you can use the parameter pcd.disable to disable
        the driver entirely.

*/

/* Changes:

    1.01    GRG 1998.01.24    Added test unit ready support
    1.02    GRG 1998.05.06  Changes to pcd_completion, ready_wait,
                and loosen interpretation of ATAPI
                    standard for clearing error status.
                Use spinlocks. Eliminate sti().
    1.03    GRG 1998.06.16  Eliminated an Ugh
    1.04    GRG 1998.08.15  Added extra debugging, improvements to
                pcd_completion, use HZ in loop timing
    1.05    GRG 1998.08.16    Conformed to "Uniform CD-ROM" standard
    1.06    GRG 1998.08.19  Added audio ioctl support
    1.07    GRG 1998.09.24  Increased reset timeout, added jumbo support

*/

#define    PCD_VERSION    "1.07"
#define PCD_MAJOR    46
#define PCD_NAME    "pcd"
#define PCD_UNITS    4

/* Here are things one can override from the insmod command.
   Most are autoprobed by paride unless set here.  Verbose is off
   by default.

*/

static int      verbose = 0;
static int      major = PCD_MAJOR;
static char     *name = PCD_NAME;
static int      nice = 0;
static int      disable = 0;

static int drive0[6] = {0,0,0,-1,-1,-1};
static int drive1[6] = {0,0,0,-1,-1,-1};
static int drive2[6] = {0,0,0,-1,-1,-1};
static int drive3[6] = {0,0,0,-1,-1,-1};

static int (*drives[4])[6] = {&drive0,&drive1,&drive2,&drive3};
static int pcd_drive_count;

#define D_PRT   0
#define D_PRO   1
#define D_UNI   2
#define D_MOD   3
#define D_SLV   4
#define D_DLY   5

#define DU              (*drives[unit])

/* end of parameters */

#include <linux/module.h>
#include <linux/errno.h>
#include <linux/fs.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/cdrom.h>
#include <linux/spinlock.h>

#include <asm/uaccess.h>

#ifndef MODULE

#include "setup.h"

static STT pcd_stt[6] = {{"drive0",6,drive0},
                         {"drive1",6,drive1},
                         {"drive2",6,drive2},
                         {"drive3",6,drive3},
             {"disable",1,&disable},
                         {"nice",1,&nice}};

void pcd_setup( char *str, int *ints)

{       generic_setup(pcd_stt,6,str);
}

#endif

MODULE_PARM(verbose,"i");
MODULE_PARM(major,"i");
MODULE_PARM(name,"s");
MODULE_PARM(nice,"i");
MODULE_PARM(drive0,"1-6i");
MODULE_PARM(drive1,"1-6i");
MODULE_PARM(drive2,"1-6i");
MODULE_PARM(drive3,"1-6i");

#include "paride.h"

/* set up defines for blk.h,  why don't all drivers do it this way ? */

#define MAJOR_NR    major
#define DEVICE_NAME "PCD"
#define DEVICE_REQUEST do_pcd_request
#define DEVICE_NR(device) (MINOR(device))
#define DEVICE_ON(device)
#define DEVICE_OFF(device)

#include <linux/blk.h>

#include "pseudo.h"

#define PCD_RETRIES         5
#define PCD_TMO           800        /* timeout in jiffies */
#define PCD_DELAY           50          /* spin delay in uS */
#define PCD_READY_TMO        20        /* in seconds */
#define PCD_RESET_TMO       100        /* in tenths of a second */

#define PCD_SPIN    (1000000*PCD_TMO)/(HZ*PCD_DELAY)

#define IDE_ERR        0x01
#define IDE_DRQ         0x08
#define IDE_READY       0x40
#define IDE_BUSY        0x80

int pcd_init(void);
void cleanup_module( void );

static int pcd_open(struct cdrom_device_info *cdi, int purpose);
static void pcd_release(struct cdrom_device_info *cdi);
static int pcd_drive_status(struct cdrom_device_info *cdi, int slot_nr);
static int pcd_media_changed(struct cdrom_device_info *cdi, int slot_nr);
static int pcd_tray_move(struct cdrom_device_info *cdi, int position);
static int pcd_lock_door(struct cdrom_device_info *cdi, int lock);
static int pcd_drive_reset(struct cdrom_device_info *cdi);
static int pcd_get_mcn (struct cdrom_device_info *cdi, struct cdrom_mcn *mcn);
static int pcd_audio_ioctl(struct cdrom_device_info *cdi,
                unsigned int cmd, void *arg);
static int pcd_packet(struct cdrom_device_info *cdi,
                struct cdrom_generic_command *cgc);

static int     pcd_detect(void);
static void     pcd_probe_capabilities(void);
static void     do_pcd_read_drq(void);
static void     do_pcd_request(request_queue_t * q);
static void     do_pcd_read(void);

static int pcd_blocksizes[PCD_UNITS];

struct pcd_unit {
    struct pi_adapter pia;        /* interface to paride layer */
    struct pi_adapter *pi;
    int drive;            /* master/slave */
    int last_sense;            /* result of last request sense */
    int changed;            /* media change seen */
    int present;            /* does this unit exist ? */
    char *name;            /* pcd0, pcd1, etc */
    struct cdrom_device_info info;    /* uniform cdrom interface */
    };

struct pcd_unit pcd[PCD_UNITS];

/*  'unit' must be defined in all functions - either as a local or a param */

#define PCD pcd[unit]
#define PI PCD.pi

static char pcd_scratch[64];
static char pcd_buffer[2048];           /* raw block buffer */
static int pcd_bufblk = -1;             /* block in buffer, in CD units,
                                           -1 for nothing there. See also
                       pd_unit.
                     */

/* the variables below are used mainly in the I/O request engine, which
   processes only one request at a time.
*/

static int pcd_unit = -1;        /* unit of current request & bufblk */
static int pcd_retries;            /* retries on current request */
static int pcd_busy = 0;        /* request being processed ? */
static int pcd_sector;            /* address of next requested sector */
static int pcd_count;            /* number of blocks still to do */
static char * pcd_buf;            /* buffer for request in progress */

static int pcd_warned = 0;        /* Have we logged a phase warning ? */

/* kernel glue structures */

static struct block_device_operations pcd_bdops = {
    owner:            THIS_MODULE,
    open:            cdrom_open,
    release:        cdrom_release,
    ioctl:            cdrom_ioctl,
    check_media_change:    cdrom_media_changed,
};

static struct cdrom_device_ops pcd_dops = {
    pcd_open,
    pcd_release,
    pcd_drive_status,
    pcd_media_changed,
    pcd_tray_move,
    pcd_lock_door,
    0,            /* select speed */
    0,            /* select disk  */
    0,             /* get last session */
    pcd_get_mcn,
    pcd_drive_reset,
    pcd_audio_ioctl,
    0,            /* dev_ioctl */
    CDC_CLOSE_TRAY       |
    CDC_OPEN_TRAY       |
    CDC_LOCK       |
    CDC_MCN           |
    CDC_MEDIA_CHANGED  |
    CDC_RESET       |
    CDC_PLAY_AUDIO       |
    CDC_GENERIC_PACKET |
    CDC_CD_R       |
    CDC_CD_RW,
    0,
    pcd_packet,
};

static void pcd_init_units( void )

{       int     unit, j;

        pcd_drive_count = 0;
        for (unit=0;unit<PCD_UNITS;unit++) {
                PCD.pi = & PCD.pia;
                PCD.present = 0;
        PCD.last_sense = 0;
        PCD.changed = 1;
                PCD.drive = DU[D_SLV];
                if (DU[D_PRT]) pcd_drive_count++;
 
                j = 0;
                while ((j < (sizeof(PCD.info.name)-2)) && 
               (PCD.info.name[j]=name[j])) j++;
                PCD.info.name[j++] = '0' + unit;
                PCD.info.name[j] = 0;
        PCD.name = &PCD.info.name[0];

        PCD.info.ops = &pcd_dops;
        PCD.info.handle = NULL;
        PCD.info.dev = MKDEV(major,unit);
        PCD.info.speed = 0;
        PCD.info.capacity = 1;
        PCD.info.mask = 0;
        }
}

int pcd_init (void)    /* preliminary initialisation */

{       int     i, unit;

    if (disable) return -1;

    pcd_init_units();

    if (pcd_detect()) return -1;

    /* get the atapi capabilities page */
    pcd_probe_capabilities();

    if (register_blkdev(MAJOR_NR,name,&pcd_bdops)) {
        printk("pcd: unable to get major number %d\n",MAJOR_NR);
        return -1;
    }

    for (unit=0;unit<PCD_UNITS;unit++) {
        if (PCD.present) {
            register_cdrom(&PCD.info);
            devfs_plain_cdrom(&PCD.info, &pcd_bdops);
        }
    }

    blk_init_queue(BLK_DEFAULT_QUEUE(MAJOR_NR), DEVICE_REQUEST);
    read_ahead[MAJOR_NR] = 8;    /* 8 sector (4kB) read ahead */

    for (i=0;i<PCD_UNITS;i++) pcd_blocksizes[i] = 1024;
        blksize_size[MAJOR_NR] = pcd_blocksizes;

    return 0;
}

static int pcd_open(struct cdrom_device_info *cdi, int purpose)

{    int unit = DEVICE_NR(cdi->dev);

    if  ((unit >= PCD_UNITS) || (!PCD.present)) return -ENODEV;

    return 0;
}

static void pcd_release(struct cdrom_device_info *cdi)

{
}

#ifdef MODULE

/* Glue for modules ... */

int    init_module(void)

{    int    err;

#ifdef PARIDE_JUMBO
       { extern paride_init();
         paride_init();
       } 
#endif

    err = pcd_init();

    return err;
}

void    cleanup_module(void)

{    int unit;
    
        for (unit=0;unit<PCD_UNITS;unit++) 
           if (PCD.present) {
        pi_release(PI);
        unregister_cdrom(&PCD.info);
       }

    unregister_blkdev(MAJOR_NR,name);
}

#endif

#define WR(c,r,v)       pi_write_regr(PI,c,r,v)
#define RR(c,r)         (pi_read_regr(PI,c,r))

static int pcd_wait( int unit, int go, int stop, char * fun, char * msg )

{    int j, r, e, s, p;

    j = 0;
    while ((((r=RR(1,6))&go)||(stop&&(!(r&stop))))&&(j++<PCD_SPIN))
        udelay(PCD_DELAY);

    if ((r&(IDE_ERR&stop))||(j>=PCD_SPIN)) {
       s = RR(0,7);
       e = RR(0,1);
       p = RR(0,2);
              if (j >= PCD_SPIN) e |= 0x100;
           if (fun) printk("%s: %s %s: alt=0x%x stat=0x%x err=0x%x"
               " loop=%d phase=%d\n",
                PCD.name,fun,msg,r,s,e,j,p);
       return (s<<8)+r;
    }
    return 0;
}

static int pcd_command( int unit, char * cmd, int dlen, char * fun )

{    pi_connect(PI);

        WR(0,6,0xa0 + 0x10*PCD.drive);

    if (pcd_wait(unit,IDE_BUSY|IDE_DRQ,0,fun,"before command")) {
        pi_disconnect(PI);
        return -1;
    }

        WR(0,4,dlen % 256);
        WR(0,5,dlen / 256);
        WR(0,7,0xa0);          /* ATAPI packet command */

        if (pcd_wait(unit,IDE_BUSY,IDE_DRQ,fun,"command DRQ")) {
        pi_disconnect(PI);
        return -1;
    }

        if (RR(0,2) != 1) {
           printk("%s: %s: command phase error\n",PCD.name,fun);
       pi_disconnect(PI);
           return -1;
        }

    pi_write_block(PI,cmd,12);

    return 0;
}

static int pcd_completion( int unit, char * buf,  char * fun )

{    int r, d, p, n, k, j;

    r = -1; k = 0; j = 0;

    if (!pcd_wait(unit,IDE_BUSY,IDE_DRQ|IDE_READY|IDE_ERR,
                        fun,"completion")) {
        r = 0;
        while (RR(0,7)&IDE_DRQ) {
            d = (RR(0,4)+256*RR(0,5));
            n = ((d+3)&0xfffc);
            p = RR(0,2)&3;

            if ((p == 2) && (n > 0) && (j == 0)) {
            pi_read_block(PI,buf,n);
                if (verbose > 1) 
            printk("%s: %s: Read %d bytes\n",PCD.name,fun,n);
            r = 0; j++;
            } else {
            if (verbose > 1) 
                printk("%s: %s: Unexpected phase %d, d=%d, k=%d\n",
                    PCD.name,fun,p,d,k);
            if ((verbose < 2) && !pcd_warned) {
                       pcd_warned = 1;
            printk("%s: WARNING: ATAPI phase errors\n",PCD.name);
            }
            mdelay(1);
            } 
        if (k++ > PCD_TMO) {
            printk("%s: Stuck DRQ\n",PCD.name);
            break;
        }
            if (pcd_wait(unit,IDE_BUSY,IDE_DRQ|IDE_READY|IDE_ERR,
                fun,"completion")) { 
            r = -1;
            break;
        }
        }
    }
    
    pi_disconnect(PI); 

    return r;
}

static void pcd_req_sense( int unit, char *fun )

{    char    rs_cmd[12] = { 0x03,0,0,0,16,0,0,0,0,0,0,0 };
    char    buf[16];
    int     r, c;

    r = pcd_command(unit,rs_cmd,16,"Request sense");
    mdelay(1);
    if (!r) pcd_completion(unit,buf,"Request sense");

    PCD.last_sense = -1;  c = 2;
    if (!r) {
            if (fun) printk("%s: %s: Sense key: %x, ASC: %x, ASQ: %x\n",
                           PCD.name,fun,buf[2]&0xf,buf[12],buf[13]);
        c = buf[2]&0xf;
        PCD.last_sense = c | ((buf[12]&0xff)<<8) | ((buf[13]&0xff)<<16);
        } 
    if ((c == 2) || (c == 6)) PCD.changed = 1;
}

static int pcd_atapi( int unit, char * cmd, int dlen, char * buf, char * fun )

{    int r;

    r = pcd_command(unit,cmd,dlen,fun);
    mdelay(1);
    if (!r) r = pcd_completion(unit,buf,fun);
    if (r) pcd_req_sense(unit,fun);
    
    return r;
}

static int pcd_packet(struct cdrom_device_info *cdi,
                struct cdrom_generic_command *cgc)
{
    char    *un_cmd;
    int    unit = DEVICE_NR(cdi->dev);

    un_cmd = cgc->cmd;
    return pcd_atapi(unit,un_cmd,cgc->buflen,cgc->buffer, "generic packet");
}

#define DBMSG(msg)    ((verbose>1)?(msg):NULL)

static int pcd_media_changed(struct cdrom_device_info *cdi, int slot_nr)

{    int     r;
    int    unit = DEVICE_NR(cdi->dev);

    r = PCD.changed;
    PCD.changed = 0;

    return r;    
}

static int pcd_lock_door(struct cdrom_device_info *cdi, int lock)

{    char    un_cmd[12] = { 0x1e,0,0,0,lock,0,0,0,0,0,0,0 };
        int     unit = DEVICE_NR(cdi->dev);

    return pcd_atapi(unit,un_cmd,0,pcd_scratch,
                lock?"lock door":"unlock door");
}

static int pcd_tray_move(struct cdrom_device_info *cdi, int position)

{    char    ej_cmd[12] = { 0x1b,0,0,0,3-position,0,0,0,0,0,0,0 };
    int    unit = DEVICE_NR(cdi->dev);

    return pcd_atapi(unit,ej_cmd,0,pcd_scratch,
                position?"eject":"close tray");
}

static void pcd_sleep( int cs )

{       current->state = TASK_INTERRUPTIBLE;
        schedule_timeout(cs);
}

static int pcd_reset( int unit )

{    int    i, k, flg;
    int    expect[5] = {1,1,1,0x14,0xeb};

    pi_connect(PI);
    WR(0,6,0xa0 + 0x10*PCD.drive);
    WR(0,7,8);

    pcd_sleep(20*HZ/1000);          /* delay a bit */

    k = 0;
    while ((k++ < PCD_RESET_TMO) && (RR(1,6)&IDE_BUSY))
        pcd_sleep(HZ/10);

    flg = 1;
    for(i=0;i<5;i++) flg &= (RR(0,i+1) == expect[i]);

    if (verbose) {
        printk("%s: Reset (%d) signature = ",PCD.name,k);
        for (i=0;i<5;i++) printk("%3x",RR(0,i+1));
        if (!flg) printk(" (incorrect)");
        printk("\n");
    }
    
    pi_disconnect(PI);
    return flg-1;    
}

static int pcd_drive_reset(struct cdrom_device_info *cdi)

{    return pcd_reset(DEVICE_NR(cdi->dev));
}

static int pcd_ready_wait( int unit, int tmo )

{       char    tr_cmd[12] = {0,0,0,0,0,0,0,0,0,0,0,0};
        int     k, p;

        k = 0;
        while (k < tmo) {
          PCD.last_sense = 0;
          pcd_atapi(unit,tr_cmd,0,NULL,DBMSG("test unit ready"));
          p = PCD.last_sense;
          if (!p) return 0;
      if (!(((p & 0xffff) == 0x0402)||((p & 0xff) == 6))) return p;
          k++;
          pcd_sleep(HZ);
        }
        return 0x000020;        /* timeout */
}

static int pcd_drive_status(struct cdrom_device_info *cdi, int slot_nr)

{    char    rc_cmd[12] = { 0x25,0,0,0,0,0,0,0,0,0,0,0};
    int    unit = DEVICE_NR(cdi->dev);

    if (pcd_ready_wait(unit,PCD_READY_TMO)) 
        return CDS_DRIVE_NOT_READY;
    if (pcd_atapi(unit,rc_cmd,8,pcd_scratch,DBMSG("check media")))
        return CDS_NO_DISC;
    return CDS_DISC_OK;
}

static int pcd_identify( int unit, char * id )

{    int k, s;
    char   id_cmd[12] = {0x12,0,0,0,36,0,0,0,0,0,0,0};

    pcd_bufblk = -1;

        s = pcd_atapi(unit,id_cmd,36,pcd_buffer,"identify");

    if (s) return -1;
    if ((pcd_buffer[0] & 0x1f) != 5) {
      if (verbose) printk("%s: %s is not a CD-ROM\n",
            PCD.name,PCD.drive?"Slave":"Master");
      return -1;
    }
    for (k=0;k<16;k++) id[k] = pcd_buffer[16+k]; id[16] = 0;
    k = 16; while ((k >= 0) && (id[k] <= 0x20)) { id[k] = 0; k--; }

    printk("%s: %s: %s\n",PCD.name,PCD.drive?"Slave":"Master",id);

    return 0;
}

static int pcd_probe( int unit, int ms, char * id )

/*    returns  0, with id set if drive is detected
            -1, if drive detection failed
*/

{    if (ms == -1) {
            for (PCD.drive=0;PCD.drive<=1;PCD.drive++)
           if (!pcd_reset(unit) && !pcd_identify(unit,id)) 
          return 0;
    } else {
        PCD.drive = ms;
            if (!pcd_reset(unit) && !pcd_identify(unit,id)) 
        return 0;
    }
    return -1;
}

static void pcd_probe_capabilities( void )

{    int    unit, r;
    char    buffer[32];
    char     cmd[12]={0x5a,1<<3,0x2a,0,0,0,0,18,0,0,0,0};

    for (unit=0;unit<PCD_UNITS;unit++) {
        if (!PCD.present) continue;
        r = pcd_atapi(unit,cmd,18, buffer,"mode sense capabilities");
        if (r) continue;
        /* we should now have the cap page */
        if ((buffer[11] & 1) == 0)
            PCD.info.mask |= CDC_CD_R;
        if ((buffer[11] & 2) == 0)
            PCD.info.mask |= CDC_CD_RW;
        if ((buffer[12] & 1) == 0)
            PCD.info.mask |= CDC_PLAY_AUDIO;
        if ((buffer[14] & 1) == 0)
            PCD.info.mask |= CDC_LOCK;
        if ((buffer[14] & 8) == 0)
            PCD.info.mask |= CDC_OPEN_TRAY;
        if ((buffer[14] >> 6) == 0)
            PCD.info.mask |= CDC_CLOSE_TRAY;
    }
}

static int pcd_detect( void )

{    char    id[18];
    int    k, unit;

    printk("%s: %s version %s, major %d, nice %d\n",
        name,name,PCD_VERSION,major,nice);

    k = 0;
    if (pcd_drive_count == 0) {  /* nothing spec'd - so autoprobe for 1 */
        unit = 0;
        if (pi_init(PI,1,-1,-1,-1,-1,-1,pcd_buffer,
                     PI_PCD,verbose,PCD.name)) {
        if (!pcd_probe(unit,-1,id)) {
            PCD.present = 1;
            k++;
        } else pi_release(PI);
        }

    } else for (unit=0;unit<PCD_UNITS;unit++) if (DU[D_PRT])
        if (pi_init(PI,0,DU[D_PRT],DU[D_MOD],DU[D_UNI],
                        DU[D_PRO],DU[D_DLY],pcd_buffer,PI_PCD,verbose,
                        PCD.name)) {
        if (!pcd_probe(unit,DU[D_SLV],id)) {
                        PCD.present = 1;
                        k++;
                } else pi_release(PI);
            }

    if (k) return 0;
    
    printk("%s: No CD-ROM drive found\n",name);
    return -1;
}

/* I/O request processing */

static void do_pcd_request (request_queue_t * q)

{       int unit;

    if (pcd_busy) return;
        while (1) {
        if (QUEUE_EMPTY || (CURRENT->rq_status == RQ_INACTIVE)) return;
        INIT_REQUEST;
        if (CURRENT->cmd == READ) {
        unit = MINOR(CURRENT->rq_dev);
        if (unit != pcd_unit) {
            pcd_bufblk = -1;
            pcd_unit = unit;
        }
            pcd_sector = CURRENT->sector;
            pcd_count = CURRENT->current_nr_sectors;
            pcd_buf = CURRENT->buffer;
        pcd_busy = 1;
            ps_set_intr(do_pcd_read,0,0,nice); 
        return;
        } 
        else end_request(0);
    }
}

static int pcd_ready( void )

{    int    unit = pcd_unit;

    return (((RR(1,6)&(IDE_BUSY|IDE_DRQ))==IDE_DRQ)) ;
}

static void pcd_transfer( void )

{    int    k, o;

    while (pcd_count && (pcd_sector/4 == pcd_bufblk)) {
        o = (pcd_sector % 4) * 512;
        for(k=0;k<512;k++) pcd_buf[k] = pcd_buffer[o+k];
        pcd_count--;
        pcd_buf += 512;
        pcd_sector++;
    }
}

static void pcd_start( void )

{    int    unit = pcd_unit;
    int    b, i;
    char    rd_cmd[12] = {0xa8,0,0,0,0,0,0,0,0,1,0,0};
    long    saved_flags;

    pcd_bufblk = pcd_sector / 4;
        b = pcd_bufblk;
    for(i=0;i<4;i++) { 
       rd_cmd[5-i] = b & 0xff;
       b = b >> 8;
    }

    if (pcd_command(unit,rd_cmd,2048,"read block")) {
        pcd_bufblk = -1; 
        spin_lock_irqsave(&io_request_lock,saved_flags);
        pcd_busy = 0;
        end_request(0);
        do_pcd_request(NULL);
        spin_unlock_irqrestore(&io_request_lock,saved_flags);
        return;
    }

    mdelay(1);

    ps_set_intr(do_pcd_read_drq,pcd_ready,PCD_TMO,nice);

}

static void do_pcd_read( void )


{    int    unit = pcd_unit;
    long    saved_flags;

    pcd_busy = 1;
    pcd_retries = 0;
    pcd_transfer();
    if (!pcd_count) {
        spin_lock_irqsave(&io_request_lock,saved_flags);
        end_request(1);
        pcd_busy = 0;
        do_pcd_request(NULL);
        spin_unlock_irqrestore(&io_request_lock,saved_flags);
        return;
    }

    pi_do_claimed(PI,pcd_start);
}

static void do_pcd_read_drq( void )

{    int    unit = pcd_unit;
    long    saved_flags;

    if (pcd_completion(unit,pcd_buffer,"read block")) {
                if (pcd_retries < PCD_RETRIES) {
                        mdelay(1); 
                        pcd_retries++;
            pi_do_claimed(PI,pcd_start);
                        return;
                        }
        spin_lock_irqsave(&io_request_lock,saved_flags);
        pcd_busy = 0;
        pcd_bufblk = -1;
        end_request(0);
        do_pcd_request(NULL);
        spin_unlock_irqrestore(&io_request_lock,saved_flags);
        return;
    }

    do_pcd_read();
    spin_lock_irqsave(&io_request_lock,saved_flags);
    do_pcd_request(NULL);
    spin_unlock_irqrestore(&io_request_lock,saved_flags); 
}

/* the audio_ioctl stuff is adapted from sr_ioctl.c */

static int pcd_audio_ioctl(struct cdrom_device_info *cdi,
                                unsigned int cmd, void *arg)

{    int    unit = DEVICE_NR(cdi->dev);
 
        switch (cmd) { 
    
        case CDROMREADTOCHDR:
    
    {    char cmd[12]={GPCMD_READ_TOC_PMA_ATIP,0,0,0,0,0,0,0,12,0,0,0};
        struct cdrom_tochdr* tochdr = (struct cdrom_tochdr*)arg;
        char buffer[32];
        int r;
    
        r = pcd_atapi(unit,cmd,12,buffer,"read toc header");

        tochdr->cdth_trk0 = buffer[2];
        tochdr->cdth_trk1 = buffer[3];
    
        return r * EIO;
        }
    
        case CDROMREADTOCENTRY:

        {    char cmd[12]={GPCMD_READ_TOC_PMA_ATIP,0,0,0,0,0,0,0,12,0,0,0};

        struct cdrom_tocentry* tocentry = (struct cdrom_tocentry*)arg;
        unsigned char buffer[32];
        int    r;
    
        cmd[1] = (tocentry->cdte_format == CDROM_MSF ? 0x02 : 0);
        cmd[6] = tocentry->cdte_track;
    
        r = pcd_atapi(unit,cmd,12,buffer,"read toc entry");

            tocentry->cdte_ctrl = buffer[5] & 0xf;    
            tocentry->cdte_adr = buffer[5] >> 4;
            tocentry->cdte_datamode = (tocentry->cdte_ctrl & 0x04)?1:0;
        if (tocentry->cdte_format == CDROM_MSF) {
            tocentry->cdte_addr.msf.minute = buffer[9];
                tocentry->cdte_addr.msf.second = buffer[10];
                tocentry->cdte_addr.msf.frame = buffer[11];
            } else
                tocentry->cdte_addr.lba = 
                (((((buffer[8] << 8) + buffer[9]) << 8)
                                       + buffer[10]) << 8) + buffer[11];
    
                return r * EIO;
        }

        default:

            return -ENOSYS;
        }
}
    
static int pcd_get_mcn (struct cdrom_device_info *cdi, struct cdrom_mcn *mcn)

{    char     cmd[12]={GPCMD_READ_SUBCHANNEL,0,0x40,2,0,0,0,0,24,0,0,0};
        char     buffer[32];
    int    k;
    int    unit = DEVICE_NR(cdi->dev);

        if (pcd_atapi(unit,cmd,24,buffer,"get mcn")) return -EIO;

    for (k=0;k<13;k++) mcn->medium_catalog_number[k] = buffer[k+9];
    mcn->medium_catalog_number[13] = 0;
    
    return 0;
}

/* end of pcd.c */

MODULE_LICENSE("GPL");

:: Command execute ::

Enter:
 
Select:
 

:: Search ::
  - regexp 

:: Upload ::
 
[ Read-Only ]

:: Make Dir ::
 
[ Read-Only ]
:: Make File ::
 
[ Read-Only ]

:: Go Dir ::
 
:: Go File ::
 

--[ c99shell v. 1.0 pre-release build #13 powered by Captain Crunch Security Team | http://ccteam.ru | Generation time: 0.0057 ]--