!C99Shell v. 1.0 pre-release build #13!

Software: Apache/2.0.54 (Unix) mod_perl/1.99_09 Perl/v5.8.0 mod_ssl/2.0.54 OpenSSL/0.9.7l DAV/2 FrontPage/5.0.2.2635 PHP/4.4.0 mod_gzip/2.0.26.1a 

uname -a: Linux snow.he.net 4.4.276-v2-mono-1 #1 SMP Wed Jul 21 11:21:17 PDT 2021 i686 

uid=99(nobody) gid=98(nobody) groups=98(nobody) 

Safe-mode: OFF (not secure)

/usr/src/linux-2.4.18-xfs-1.1/arch/sh/kernel/   drwxr-xr-x
Free 318.36 GB of 458.09 GB (69.5%)
Home    Back    Forward    UPDIR    Refresh    Search    Buffer    Encoder    Tools    Proc.    FTP brute    Sec.    SQL    PHP-code    Update    Feedback    Self remove    Logout    


Viewing file:     setup_hd64465.c (4.84 KB)      -rw-r--r--
Select action/file-type:
(+) | (+) | (+) | Code (+) | Session (+) | (+) | SDB (+) | (+) | (+) | (+) | (+) | (+) |
/*
 * $Id: setup_hd64465.c,v 1.4 2001/07/15 23:26:56 gniibe Exp $
 *
 * Setup and IRQ handling code for the HD64465 companion chip.
 * by Greg Banks <gbanks@pocketpenguins.com>
 * Copyright (c) 2000 PocketPenguins Inc
 *
 * Derived from setup_hd64461.c which bore the message:
 * Copyright (C) 2000 YAEGASHI Takeshi
 */

#include <linux/config.h>
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/irq.h>

#include <asm/io.h>
#include <asm/irq.h>

#include <asm/hd64465.h>

#undef HD64465_DEBUG

#ifdef HD64465_DEBUG
#define DPRINTK(args...)    printk(args)
#else
#define DPRINTK(args...)
#endif

static void disable_hd64465_irq(unsigned int irq)
{
    unsigned long flags;
    unsigned short nimr;
    unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);

        DPRINTK("disable_hd64465_irq(%d): mask=%x\n", irq, mask);
    save_and_cli(flags);
    nimr = inw(HD64465_REG_NIMR);
    nimr |= mask;
    outw(nimr, HD64465_REG_NIMR);
    restore_flags(flags);
}


static void enable_hd64465_irq(unsigned int irq)
{
    unsigned long flags;
    unsigned short nimr;
    unsigned short mask = 1 << (irq - HD64465_IRQ_BASE);

        DPRINTK("enable_hd64465_irq(%d): mask=%x\n", irq, mask);
    save_and_cli(flags);
    nimr = inw(HD64465_REG_NIMR);
    nimr &= ~mask;
    outw(nimr, HD64465_REG_NIMR);
    restore_flags(flags);
}


static void mask_and_ack_hd64465(unsigned int irq)
{
    disable_hd64465_irq(irq);
}


static void end_hd64465_irq(unsigned int irq)
{
    if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS)))
        enable_hd64465_irq(irq);
}


static unsigned int startup_hd64465_irq(unsigned int irq)

    enable_hd64465_irq(irq);
    return 0;
}


static void shutdown_hd64465_irq(unsigned int irq)
{
    disable_hd64465_irq(irq);
}


static struct hw_interrupt_type hd64465_irq_type = {
    typename:    "HD64465-IRQ",
    startup:    startup_hd64465_irq,
    shutdown:    shutdown_hd64465_irq,
    enable:        enable_hd64465_irq,
    disable:    disable_hd64465_irq,
    ack:        mask_and_ack_hd64465,
    end:        end_hd64465_irq
};


static void hd64465_interrupt(int irq, void *dev_id, struct pt_regs *regs)
{
    printk(KERN_INFO
           "HD64465: spurious interrupt, nirr: 0x%x nimr: 0x%x\n",
           inw(HD64465_REG_NIRR), inw(HD64465_REG_NIMR));
}


/*====================================================*/

/*
 * Support for a secondary IRQ demux step.  This is necessary
 * because the HD64465 presents a very thin interface to the
 * PCMCIA bus; a lot of features (such as remapping interrupts)
 * normally done in hardware by other PCMCIA host bridges is
 * instead done in software.
 */
static struct
{
    int (*func)(int, void *);
    void *dev;
} hd64465_demux[HD64465_IRQ_NUM];

void hd64465_register_irq_demux(int irq,
        int (*demux)(int irq, void *dev), void *dev)
{
        hd64465_demux[irq - HD64465_IRQ_BASE].func = demux;
        hd64465_demux[irq - HD64465_IRQ_BASE].dev = dev;
}
EXPORT_SYMBOL(hd64465_register_irq_demux);

void hd64465_unregister_irq_demux(int irq)
{
        hd64465_demux[irq - HD64465_IRQ_BASE].func = 0;
}
EXPORT_SYMBOL(hd64465_unregister_irq_demux);



int hd64465_irq_demux(int irq)
{
    if (irq == CONFIG_HD64465_IRQ) {
        unsigned short i, bit;
        unsigned short nirr = inw(HD64465_REG_NIRR);
        unsigned short nimr = inw(HD64465_REG_NIMR);

                DPRINTK("hd64465_irq_demux, nirr=%04x, nimr=%04x\n", nirr, nimr);
        nirr &= ~nimr;
        for (bit = 1, i = 0 ; i < HD64465_IRQ_NUM ; bit <<= 1, i++)
            if (nirr & bit)
                break;

                if (i < HD64465_IRQ_NUM) {
            irq = HD64465_IRQ_BASE + i;
                    if (hd64465_demux[i].func != 0)
                irq = hd64465_demux[i].func(irq, hd64465_demux[i].dev);
        }
    }
    return irq;
}

static struct irqaction irq0  = { hd64465_interrupt, SA_INTERRUPT, 0, "HD64465", NULL, NULL};


static int __init setup_hd64465(void)
{
    int i;
    unsigned short rev;
    unsigned short smscr;

    if (!MACH_HD64465)
        return 0;

    printk(KERN_INFO "HD64465 configured at 0x%x on irq %d(mapped into %d to %d)\n",
           CONFIG_HD64465_IOBASE,
           CONFIG_HD64465_IRQ,
           HD64465_IRQ_BASE,
           HD64465_IRQ_BASE+HD64465_IRQ_NUM-1);

    if (inw(HD64465_REG_SDID) != HD64465_SDID) {
        printk(KERN_ERR "HD64465 device ID not found, check base address\n");
    }

    rev = inw(HD64465_REG_SRR);
    printk(KERN_INFO "HD64465 hardware revision %d.%d\n", (rev >> 8) & 0xff, rev & 0xff);
           
    outw(0xffff, HD64465_REG_NIMR);     /* mask all interrupts */

    for (i = 0; i < HD64465_IRQ_NUM ; i++) {
        irq_desc[HD64465_IRQ_BASE + i].handler = &hd64465_irq_type;
    }

    setup_irq(CONFIG_HD64465_IRQ, &irq0);

#ifdef CONFIG_SERIAL
    /* wake up the UART from STANDBY at this point */
    smscr = inw(HD64465_REG_SMSCR);
    outw(smscr & (~HD64465_SMSCR_UARTST), HD64465_REG_SMSCR);

    /* remap IO ports for first ISA serial port to HD64465 UART */
    hd64465_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1);
#endif

    return 0;
}

module_init(setup_hd64465);

:: Command execute ::

Enter:
 
Select:
 

:: Search ::
  - regexp 

:: Upload ::
 
[ Read-Only ]

:: Make Dir ::
 
[ Read-Only ]
:: Make File ::
 
[ Read-Only ]

:: Go Dir ::
 
:: Go File ::
 

--[ c99shell v. 1.0 pre-release build #13 powered by Captain Crunch Security Team | http://ccteam.ru | Generation time: 0.0046 ]--