Viewing file:  setup_bigsur.c (10.9 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
*
* By Dustin McIntire (dustin@sensoria.com) (c)2001
*
* Setup and IRQ handling code for the HD64465 companion chip.
* by Greg Banks <gbanks@pocketpenguins.com>
* Copyright (c) 2000 PocketPenguins Inc
*
* Derived from setup_hd64465.c which bore the message:
* Greg Banks <gbanks@pocketpenguins.com>
* Copyright (c) 2000 PocketPenguins Inc and
* Copyright (C) 2000 YAEGASHI Takeshi
* and setup_cqreek.c which bore message:
* Copyright (C) 2000 Niibe Yutaka
*
* May be copied or modified under the terms of the GNU General Public
* License. See linux/COPYING for more information.
*
* Setup and IRQ functions for a Hitachi Big Sur Evaluation Board.
*
*/
#include <linux/config.h>
#include <linux/sched.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/param.h>
#include <linux/ioport.h>
#include <linux/interrupt.h>
#include <linux/init.h>
#include <linux/irq.h>
#include <asm/io.h>
#include <asm/irq.h>
#include <asm/bitops.h>
#include <asm/io_bigsur.h>
#include <asm/hd64465.h>
#include <asm/bigsur.h>
//#define BIGSUR_DEBUG 3
#undef BIGSUR_DEBUG
#ifdef BIGSUR_DEBUG
#define DPRINTK(args...) printk(args)
#define DIPRINTK(n, args...) if (BIGSUR_DEBUG>(n)) printk(args)
#else
#define DPRINTK(args...)
#define DIPRINTK(n, args...)
#endif /* BIGSUR_DEBUG */
#ifdef CONFIG_HD64465
extern int hd64465_irq_demux(int irq);
#endif /* CONFIG_HD64465 */
/*===========================================================*/
// Big Sur CPLD IRQ Routines
/*===========================================================*/
/* Level 1 IRQ routines */
static void disable_bigsur_l1irq(unsigned int irq)
{
unsigned long flags;
unsigned char mask;
unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0;
unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) );
if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) {
DPRINTK("Disable L1 IRQ %d\n", irq);
DIPRINTK(2,"disable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n",
mask_port, bit);
save_and_cli(flags);
/* Disable IRQ - set mask bit */
mask = inb(mask_port) | bit;
outb(mask, mask_port);
restore_flags(flags);
return;
}
DPRINTK("disable_bigsur_l1irq: Invalid IRQ %d\n", irq);
}
static void enable_bigsur_l1irq(unsigned int irq)
{
unsigned long flags;
unsigned char mask;
unsigned int mask_port = ((irq - BIGSUR_IRQ_LOW)/8) ? BIGSUR_IRLMR1 : BIGSUR_IRLMR0;
unsigned char bit = (1 << ((irq - MGATE_IRQ_LOW)%8) );
if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) {
DPRINTK("Enable L1 IRQ %d\n", irq);
DIPRINTK(2,"enable_bigsur_l1irq: IMR=0x%08x mask=0x%x\n",
mask_port, bit);
save_and_cli(flags);
/* Enable L1 IRQ - clear mask bit */
mask = inb(mask_port) & ~bit;
outb(mask, mask_port);
restore_flags(flags);
return;
}
DPRINTK("enable_bigsur_l1irq: Invalid IRQ %d\n", irq);
}
/* Level 2 irq masks and registers for L2 decoding */
/* Level2 bitmasks for each level 1 IRQ */
const u32 bigsur_l2irq_mask[] =
{0x40,0x80,0x08,0x01,0x01,0x3C,0x3E,0xFF,0x40,0x80,0x06,0x03};
/* Level2 to ISR[n] map for each level 1 IRQ */
const u32 bigsur_l2irq_reg[] =
{ 2, 2, 3, 3, 1, 2, 1, 0, 1, 1, 3, 2};
/* Level2 to Level 1 IRQ map */
const u32 bigsur_l2_l1_map[] =
{7,7,7,7,7,7,7,7, 4,6,6,6,6,6,8,9, 11,11,5,5,5,5,0,1, 3,10,10,2,-1,-1,-1,-1};
/* IRQ inactive level (high or low) */
const u32 bigsur_l2_inactv_state[] = {0x00, 0xBE, 0xFC, 0xF7};
/* CPLD external status and mask registers base and offsets */
static const u32 isr_base = BIGSUR_IRQ0;
static const u32 isr_offset = BIGSUR_IRQ0 - BIGSUR_IRQ1;
static const u32 imr_base = BIGSUR_IMR0;
static const u32 imr_offset = BIGSUR_IMR0 - BIGSUR_IMR1;
#define REG_NUM(irq) ((irq-BIGSUR_2NDLVL_IRQ_LOW)/8 )
/* Level 2 IRQ routines */
static void disable_bigsur_l2irq(unsigned int irq)
{
unsigned long flags;
unsigned char mask;
unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8);
unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset;
if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) {
DPRINTK("Disable L2 IRQ %d\n", irq);
DIPRINTK(2,"disable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n",
mask_port, bit);
save_and_cli(flags);
/* Disable L2 IRQ - set mask bit */
mask = inb(mask_port) | bit;
outb(mask, mask_port);
restore_flags(flags);
return;
}
DPRINTK("disable_bigsur_l2irq: Invalid IRQ %d\n", irq);
}
static void enable_bigsur_l2irq(unsigned int irq)
{
unsigned long flags;
unsigned char mask;
unsigned char bit = 1 << ((irq-BIGSUR_2NDLVL_IRQ_LOW)%8);
unsigned int mask_port = imr_base - REG_NUM(irq)*imr_offset;
if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) {
DPRINTK("Enable L2 IRQ %d\n", irq);
DIPRINTK(2,"enable_bigsur_l2irq: IMR=0x%08x mask=0x%x\n",
mask_port, bit);
save_and_cli(flags);
/* Enable L2 IRQ - clear mask bit */
mask = inb(mask_port) & ~bit;
outb(mask, mask_port);
restore_flags(flags);
return;
}
DPRINTK("enable_bigsur_l2irq: Invalid IRQ %d\n", irq);
}
static void mask_and_ack_bigsur(unsigned int irq)
{
DPRINTK("mask_and_ack_bigsur IRQ %d\n", irq);
if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH)
disable_bigsur_l1irq(irq);
else
disable_bigsur_l2irq(irq);
}
static void end_bigsur_irq(unsigned int irq)
{
DPRINTK("end_bigsur_irq IRQ %d\n", irq);
if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) {
if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH)
enable_bigsur_l1irq(irq);
else
enable_bigsur_l2irq(irq);
}
}
static unsigned int startup_bigsur_irq(unsigned int irq)
{
u8 mask;
u32 reg;
DPRINTK("startup_bigsur_irq IRQ %d\n", irq);
if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) {
/* Enable the L1 IRQ */
enable_bigsur_l1irq(irq);
/* Enable all L2 IRQs in this L1 IRQ */
mask = ~(bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW]);
reg = imr_base - bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW] * imr_offset;
mask &= inb(reg);
outb(mask,reg);
DIPRINTK(2,"startup_bigsur_irq: IMR=0x%08x mask=0x%x\n",reg,inb(reg));
}
else {
/* Enable the L2 IRQ - clear mask bit */
enable_bigsur_l2irq(irq);
/* Enable the L1 bit masking this L2 IRQ */
enable_bigsur_l1irq(bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW]);
DIPRINTK(2,"startup_bigsur_irq: L1=%d L2=%d\n",
bigsur_l2_l1_map[irq-BIGSUR_2NDLVL_IRQ_LOW],irq);
}
return 0;
}
static void shutdown_bigsur_irq(unsigned int irq)
{
DPRINTK("shutdown_bigsur_irq IRQ %d\n", irq);
if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH)
disable_bigsur_l1irq(irq);
else
disable_bigsur_l2irq(irq);
}
/* Define the IRQ structures for the L1 and L2 IRQ types */
static struct hw_interrupt_type bigsur_l1irq_type = {
"BigSur-CPLD-Level1-IRQ",
startup_bigsur_irq,
shutdown_bigsur_irq,
enable_bigsur_l1irq,
disable_bigsur_l1irq,
mask_and_ack_bigsur,
end_bigsur_irq
};
static struct hw_interrupt_type bigsur_l2irq_type = {
"BigSur-CPLD-Level2-IRQ",
startup_bigsur_irq,
shutdown_bigsur_irq,
enable_bigsur_l2irq,
disable_bigsur_l2irq,
mask_and_ack_bigsur,
end_bigsur_irq
};
static void make_bigsur_l1isr(unsigned int irq) {
/* sanity check first */
if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) {
/* save the handler in the main description table */
irq_desc[irq].handler = &bigsur_l1irq_type;
irq_desc[irq].status = IRQ_DISABLED;
irq_desc[irq].action = 0;
irq_desc[irq].depth = 1;
disable_bigsur_l1irq(irq);
return;
}
DPRINTK("make_bigsur_l1isr: bad irq, %d\n", irq);
return;
}
static void make_bigsur_l2isr(unsigned int irq) {
/* sanity check first */
if(irq >= BIGSUR_2NDLVL_IRQ_LOW && irq < BIGSUR_2NDLVL_IRQ_HIGH) {
/* save the handler in the main description table */
irq_desc[irq].handler = &bigsur_l2irq_type;
irq_desc[irq].status = IRQ_DISABLED;
irq_desc[irq].action = 0;
irq_desc[irq].depth = 1;
disable_bigsur_l2irq(irq);
return;
}
DPRINTK("make_bigsur_l2isr: bad irq, %d\n", irq);
return;
}
/* The IRQ's will be decoded as follows:
* If a level 2 handler exists and there is an unmasked active
* IRQ, the 2nd level handler will be called.
* If a level 2 handler does not exist for the active IRQ
* the 1st level handler will be called.
*/
int bigsur_irq_demux(int irq)
{
int dmux_irq = irq;
u8 mask, actv_irqs;
u32 reg_num;
DIPRINTK(3,"bigsur_irq_demux, irq=%d\n", irq);
/* decode the 1st level IRQ */
if(irq >= BIGSUR_IRQ_LOW && irq < BIGSUR_IRQ_HIGH) {
/* Get corresponding L2 ISR bitmask and ISR number */
mask = bigsur_l2irq_mask[irq-BIGSUR_IRQ_LOW];
reg_num = bigsur_l2irq_reg[irq-BIGSUR_IRQ_LOW];
/* find the active IRQ's (XOR with inactive level)*/
actv_irqs = inb(isr_base-reg_num*isr_offset) ^
bigsur_l2_inactv_state[reg_num];
/* decode active IRQ's */
actv_irqs = actv_irqs & mask & ~(inb(imr_base-reg_num*imr_offset));
/* if NEZ then we have an active L2 IRQ */
if(actv_irqs) dmux_irq = ffz(~actv_irqs) + reg_num*8+BIGSUR_2NDLVL_IRQ_LOW;
/* if no 2nd level IRQ action, but has 1st level, use 1st level handler */
if(!irq_desc[dmux_irq].action && irq_desc[irq].action)
dmux_irq = irq;
DIPRINTK(1,"bigsur_irq_demux: irq=%d dmux_irq=%d mask=0x%04x reg=%d\n",
irq, dmux_irq, mask, reg_num);
}
#ifdef CONFIG_HD64465
dmux_irq = hd64465_irq_demux(dmux_irq);
#endif /* CONFIG_HD64465 */
DIPRINTK(3,"bigsur_irq_demux, demux_irq=%d\n", dmux_irq);
return dmux_irq;
}
/*===========================================================*/
// Big Sur Init Routines
/*===========================================================*/
void __init init_bigsur_IRQ(void)
{
int i;
if (!MACH_BIGSUR) return;
/* Create ISR's for Big Sur CPLD IRQ's */
/*==============================================================*/
for(i=BIGSUR_IRQ_LOW;i<BIGSUR_IRQ_HIGH;i++)
make_bigsur_l1isr(i);
printk(KERN_INFO "Big Sur CPLD L1 interrupts %d to %d.\n",
BIGSUR_IRQ_LOW,BIGSUR_IRQ_HIGH);
for(i=BIGSUR_2NDLVL_IRQ_LOW;i<BIGSUR_2NDLVL_IRQ_HIGH;i++)
make_bigsur_l2isr(i);
printk(KERN_INFO "Big Sur CPLD L2 interrupts %d to %d.\n",
BIGSUR_2NDLVL_IRQ_LOW,BIGSUR_2NDLVL_IRQ_HIGH);
}
int __init setup_bigsur(void)
{
static int done = 0; /* run this only once */
if (!MACH_BIGSUR || done) return 0;
done = 1;
/* Mask all 2nd level IRQ's */
outb(-1,BIGSUR_IMR0);
outb(-1,BIGSUR_IMR1);
outb(-1,BIGSUR_IMR2);
outb(-1,BIGSUR_IMR3);
/* Mask 1st level interrupts */
outb(-1,BIGSUR_IRLMR0);
outb(-1,BIGSUR_IRLMR1);
#if defined (CONFIG_HD64465) && defined (CONFIG_SERIAL)
/* remap IO ports for first ISA serial port to HD64465 UART */
bigsur_port_map(0x3f8, 8, CONFIG_HD64465_IOBASE + 0x8000, 1);
#endif /* CONFIG_HD64465 && CONFIG_SERIAL */
/* TODO: setup IDE registers */
bigsur_port_map(BIGSUR_IDECTL_IOPORT, 2, BIGSUR_ICTL, 8);
/* Setup the Ethernet port to BIGSUR_ETHER_IOPORT */
bigsur_port_map(BIGSUR_ETHER_IOPORT, 16, BIGSUR_ETHR+BIGSUR_ETHER_IOPORT, 0);
/* set page to 1 */
outw(1, BIGSUR_ETHR+0xe);
/* set the IO port to BIGSUR_ETHER_IOPORT */
outw(BIGSUR_ETHER_IOPORT<<3, BIGSUR_ETHR+0x2);
return 0;
}
module_init(setup_bigsur);
|