Viewing file:  setup.c (13.51 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* linux/arch/m68k/kernel/setup.c
*
* Copyright (C) 1995 Hamish Macdonald
*/
/*
* This file handles the architecture-dependent parts of system setup
*/
#include <linux/config.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/delay.h>
#include <linux/interrupt.h>
#include <linux/fs.h>
#include <linux/console.h>
#include <linux/genhd.h>
#include <linux/errno.h>
#include <linux/string.h>
#include <linux/init.h>
#include <linux/bootmem.h>
#include <linux/module.h>
#include <asm/bootinfo.h>
#include <asm/setup.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/machdep.h>
#ifdef CONFIG_AMIGA
#include <asm/amigahw.h>
#endif
#ifdef CONFIG_ATARI
#include <asm/atarihw.h>
#endif
#ifdef CONFIG_SUN3X
#include <asm/dvma.h>
extern void sun_serial_setup(void);
#endif
#ifdef CONFIG_BLK_DEV_INITRD
#include <linux/blk.h>
#endif
unsigned long m68k_machtype;
unsigned long m68k_cputype;
unsigned long m68k_fputype;
unsigned long m68k_mmutype;
#ifdef CONFIG_VME
unsigned long vme_brdtype;
#endif
int m68k_is040or060 = 0;
extern int end;
extern unsigned long availmem;
int m68k_num_memory = 0;
int m68k_realnum_memory = 0;
unsigned long m68k_memoffset;
struct mem_info m68k_memory[NUM_MEMINFO];
static struct mem_info m68k_ramdisk = { 0, 0 };
static char m68k_command_line[CL_SIZE];
char saved_command_line[CL_SIZE];
char m68k_debug_device[6] = "";
void (*mach_sched_init) (void (*handler)(int, void *, struct pt_regs *)) __initdata = NULL;
/* machine dependent keyboard functions */
int (*mach_keyb_init) (void) __initdata = NULL;
int (*mach_kbdrate) (struct kbd_repeat *) = NULL;
void (*mach_kbd_leds) (unsigned int) = NULL;
int (*mach_kbd_translate)(unsigned char scancode, unsigned char *keycode, char raw_mode) = NULL;
unsigned int SYSRQ_KEY;
/* machine dependent irq functions */
void (*mach_init_IRQ) (void) __initdata = NULL;
void (*(*mach_default_handler)[]) (int, void *, struct pt_regs *) = NULL;
void (*mach_get_model) (char *model) = NULL;
int (*mach_get_hardware_list) (char *buffer) = NULL;
int (*mach_get_irq_list) (char *) = NULL;
void (*mach_process_int) (int, struct pt_regs *) = NULL;
/* machine dependent timer functions */
unsigned long (*mach_gettimeoffset) (void);
void (*mach_gettod) (int*, int*, int*, int*, int*, int*);
int (*mach_hwclk) (int, struct hwclk_time*) = NULL;
int (*mach_set_clock_mmss) (unsigned long) = NULL;
void (*mach_reset)( void );
void (*mach_halt)( void ) = NULL;
void (*mach_power_off)( void ) = NULL;
long mach_max_dma_address = 0x00ffffff; /* default set to the lower 16MB */
#if defined(CONFIG_AMIGA_FLOPPY) || defined(CONFIG_ATARI_FLOPPY)
void (*mach_floppy_setup) (char *, int *) __initdata = NULL;
void (*mach_floppy_eject) (void) = NULL;
#endif
#ifdef CONFIG_HEARTBEAT
void (*mach_heartbeat) (int) = NULL;
EXPORT_SYMBOL(mach_heartbeat);
#endif
#ifdef CONFIG_M68K_L2_CACHE
void (*mach_l2_flush) (int) = NULL;
#endif
#ifdef CONFIG_MAGIC_SYSRQ
int mach_sysrq_key = -1;
int mach_sysrq_shift_state = 0;
int mach_sysrq_shift_mask = 0;
char *mach_sysrq_xlate = NULL;
#endif
#if defined(CONFIG_ISA)
int isa_type;
int isa_sex;
#endif
extern int amiga_parse_bootinfo(const struct bi_record *);
extern int atari_parse_bootinfo(const struct bi_record *);
extern int mac_parse_bootinfo(const struct bi_record *);
extern int q40_parse_bootinfo(const struct bi_record *);
extern int bvme6000_parse_bootinfo(const struct bi_record *);
extern int mvme16x_parse_bootinfo(const struct bi_record *);
extern int mvme147_parse_bootinfo(const struct bi_record *);
extern void config_amiga(void);
extern void config_atari(void);
extern void config_mac(void);
extern void config_sun3(void);
extern void config_apollo(void);
extern void config_mvme147(void);
extern void config_mvme16x(void);
extern void config_bvme6000(void);
extern void config_hp300(void);
extern void config_q40(void);
extern void config_sun3x(void);
extern void mac_debugging_short (int, short);
extern void mac_debugging_long (int, long);
#define MASK_256K 0xfffc0000
extern void paging_init(void);
static void __init m68k_parse_bootinfo(const struct bi_record *record)
{
while (record->tag != BI_LAST) {
int unknown = 0;
const unsigned long *data = record->data;
switch (record->tag) {
case BI_MACHTYPE:
case BI_CPUTYPE:
case BI_FPUTYPE:
case BI_MMUTYPE:
/* Already set up by head.S */
break;
case BI_MEMCHUNK:
if (m68k_num_memory < NUM_MEMINFO) {
m68k_memory[m68k_num_memory].addr = data[0];
m68k_memory[m68k_num_memory].size = data[1];
m68k_num_memory++;
} else
printk("m68k_parse_bootinfo: too many memory chunks\n");
break;
case BI_RAMDISK:
m68k_ramdisk.addr = data[0];
m68k_ramdisk.size = data[1];
break;
case BI_COMMAND_LINE:
strncpy(m68k_command_line, (const char *)data, CL_SIZE);
m68k_command_line[CL_SIZE-1] = '\0';
break;
default:
if (MACH_IS_AMIGA)
unknown = amiga_parse_bootinfo(record);
else if (MACH_IS_ATARI)
unknown = atari_parse_bootinfo(record);
else if (MACH_IS_MAC)
unknown = mac_parse_bootinfo(record);
else if (MACH_IS_Q40)
unknown = q40_parse_bootinfo(record);
else if (MACH_IS_BVME6000)
unknown = bvme6000_parse_bootinfo(record);
else if (MACH_IS_MVME16x)
unknown = mvme16x_parse_bootinfo(record);
else if (MACH_IS_MVME147)
unknown = mvme147_parse_bootinfo(record);
else
unknown = 1;
}
if (unknown)
printk("m68k_parse_bootinfo: unknown tag 0x%04x ignored\n",
record->tag);
record = (struct bi_record *)((unsigned long)record+record->size);
}
m68k_realnum_memory = m68k_num_memory;
#ifdef CONFIG_SINGLE_MEMORY_CHUNK
if (m68k_num_memory > 1) {
printk("Ignoring last %i chunks of physical memory\n",
(m68k_num_memory - 1));
m68k_num_memory = 1;
}
m68k_memoffset = m68k_memory[0].addr-PAGE_OFFSET;
#endif
}
void __init setup_arch(char **cmdline_p)
{
extern int _etext, _edata, _end;
#ifndef CONFIG_SUN3
unsigned long endmem, startmem;
#endif
int i;
char *p, *q;
/* The bootinfo is located right after the kernel bss */
m68k_parse_bootinfo((const struct bi_record *)&_end);
if (CPU_IS_040)
m68k_is040or060 = 4;
else if (CPU_IS_060)
m68k_is040or060 = 6;
/* FIXME: m68k_fputype is passed in by Penguin booter, which can
* be confused by software FPU emulation. BEWARE.
* We should really do our own FPU check at startup.
* [what do we do with buggy 68LC040s? if we have problems
* with them, we should add a test to check_bugs() below] */
#ifndef CONFIG_M68KFPU_EMU_ONLY
/* clear the fpu if we have one */
if (m68k_fputype & (FPU_68881|FPU_68882|FPU_68040|FPU_68060)) {
volatile int zero = 0;
asm __volatile__ ("frestore %0" : : "m" (zero));
}
#endif
init_mm.start_code = PAGE_OFFSET;
init_mm.end_code = (unsigned long) &_etext;
init_mm.end_data = (unsigned long) &_edata;
init_mm.brk = (unsigned long) &_end;
*cmdline_p = m68k_command_line;
memcpy(saved_command_line, *cmdline_p, CL_SIZE);
/* Parse the command line for arch-specific options.
* For the m68k, this is currently only "debug=xxx" to enable printing
* certain kernel messages to some machine-specific device.
*/
for( p = *cmdline_p; p && *p; ) {
i = 0;
if (!strncmp( p, "debug=", 6 )) {
strncpy( m68k_debug_device, p+6, sizeof(m68k_debug_device)-1 );
m68k_debug_device[sizeof(m68k_debug_device)-1] = 0;
if ((q = strchr( m68k_debug_device, ' ' ))) *q = 0;
i = 1;
}
#ifdef CONFIG_ATARI
/* This option must be parsed very early */
if (!strncmp( p, "switches=", 9 )) {
extern void atari_switches_setup( const char *, int );
atari_switches_setup( p+9, (q = strchr( p+9, ' ' )) ?
(q - (p+9)) : strlen(p+9) );
i = 1;
}
#endif
if (i) {
/* option processed, delete it */
if ((q = strchr( p, ' ' )))
strcpy( p, q+1 );
else
*p = 0;
} else {
if ((p = strchr( p, ' ' ))) ++p;
}
}
switch (m68k_machtype) {
#ifdef CONFIG_AMIGA
case MACH_AMIGA:
config_amiga();
break;
#endif
#ifdef CONFIG_ATARI
case MACH_ATARI:
config_atari();
break;
#endif
#ifdef CONFIG_MAC
case MACH_MAC:
config_mac();
break;
#endif
#ifdef CONFIG_SUN3
case MACH_SUN3:
config_sun3();
break;
#endif
#ifdef CONFIG_APOLLO
case MACH_APOLLO:
config_apollo();
break;
#endif
#ifdef CONFIG_MVME147
case MACH_MVME147:
config_mvme147();
break;
#endif
#ifdef CONFIG_MVME16x
case MACH_MVME16x:
config_mvme16x();
break;
#endif
#ifdef CONFIG_BVME6000
case MACH_BVME6000:
config_bvme6000();
break;
#endif
#ifdef CONFIG_HP300
case MACH_HP300:
config_hp300();
break;
#endif
#ifdef CONFIG_Q40
case MACH_Q40:
config_q40();
break;
#endif
#ifdef CONFIG_SUN3X
case MACH_SUN3X:
config_sun3x();
break;
#endif
default:
panic ("No configuration setup");
}
#ifndef CONFIG_SUN3
startmem= m68k_memory[0].addr;
endmem = startmem + m68k_memory[0].size;
high_memory = PAGE_OFFSET;
for (i = 0; i < m68k_num_memory; i++) {
m68k_memory[i].size &= MASK_256K;
if (m68k_memory[i].addr < startmem)
startmem = m68k_memory[i].addr;
if (m68k_memory[i].addr+m68k_memory[i].size > endmem)
endmem = m68k_memory[i].addr+m68k_memory[i].size;
high_memory += m68k_memory[i].size;
}
availmem += init_bootmem_node(NODE_DATA(0), availmem >> PAGE_SHIFT,
startmem >> PAGE_SHIFT, endmem >> PAGE_SHIFT);
for (i = 0; i < m68k_num_memory; i++)
free_bootmem(m68k_memory[i].addr, m68k_memory[i].size);
reserve_bootmem(m68k_memory[0].addr, availmem - m68k_memory[0].addr);
#ifdef CONFIG_BLK_DEV_INITRD
if (m68k_ramdisk.size) {
reserve_bootmem(m68k_ramdisk.addr, m68k_ramdisk.size);
initrd_start = (unsigned long)phys_to_virt(m68k_ramdisk.addr);
initrd_end = initrd_start + m68k_ramdisk.size;
printk ("initrd: %08lx - %08lx\n", initrd_start, initrd_end);
}
#endif
#ifdef CONFIG_ATARI
if (MACH_IS_ATARI)
atari_stram_reserve_pages(availmem);
#endif
#ifdef CONFIG_SUN3X
if (MACH_IS_SUN3X) {
dvma_init();
#ifdef CONFIG_SUN3X_ZS
sun_serial_setup();
#endif
}
#endif
#endif /* !CONFIG_SUN3 */
paging_init();
/* set ISA defs early as possible */
#if defined(CONFIG_ISA)
#if defined(CONFIG_Q40)
if (MACH_IS_Q40) {
isa_type = Q40_ISA;
isa_sex = 0;
}
#elif defined(CONFIG_GG2)
if (MACH_IS_AMIGA && AMIGAHW_PRESENT(GG2_ISA)){
isa_type = GG2_ISA;
isa_sex = 0;
}
#elif defined(CONFIG_AMIGA_PCMCIA)
if (MACH_IS_AMIGA && AMIGAHW_PRESENT(PCMCIA)){
isa_type = AG_ISA;
isa_sex = 1;
}
#endif
#endif
}
int get_cpuinfo(char * buffer)
{
const char *cpu, *mmu, *fpu;
unsigned long clockfreq, clockfactor;
#define LOOP_CYCLES_68020 (8)
#define LOOP_CYCLES_68030 (8)
#define LOOP_CYCLES_68040 (3)
#define LOOP_CYCLES_68060 (1)
if (CPU_IS_020) {
cpu = "68020";
clockfactor = LOOP_CYCLES_68020;
} else if (CPU_IS_030) {
cpu = "68030";
clockfactor = LOOP_CYCLES_68030;
} else if (CPU_IS_040) {
cpu = "68040";
clockfactor = LOOP_CYCLES_68040;
} else if (CPU_IS_060) {
cpu = "68060";
clockfactor = LOOP_CYCLES_68060;
} else {
cpu = "680x0";
clockfactor = 0;
}
#ifdef CONFIG_M68KFPU_EMU_ONLY
fpu="none(soft float)";
#else
if (m68k_fputype & FPU_68881)
fpu = "68881";
else if (m68k_fputype & FPU_68882)
fpu = "68882";
else if (m68k_fputype & FPU_68040)
fpu = "68040";
else if (m68k_fputype & FPU_68060)
fpu = "68060";
else if (m68k_fputype & FPU_SUNFPA)
fpu = "Sun FPA";
else
fpu = "none";
#endif
if (m68k_mmutype & MMU_68851)
mmu = "68851";
else if (m68k_mmutype & MMU_68030)
mmu = "68030";
else if (m68k_mmutype & MMU_68040)
mmu = "68040";
else if (m68k_mmutype & MMU_68060)
mmu = "68060";
else if (m68k_mmutype & MMU_SUN3)
mmu = "Sun-3";
else if (m68k_mmutype & MMU_APOLLO)
mmu = "Apollo";
else
mmu = "unknown";
clockfreq = loops_per_jiffy*HZ*clockfactor;
return(sprintf(buffer, "CPU:\t\t%s\n"
"MMU:\t\t%s\n"
"FPU:\t\t%s\n"
"Clocking:\t%lu.%1luMHz\n"
"BogoMips:\t%lu.%02lu\n"
"Calibration:\t%lu loops\n",
cpu, mmu, fpu,
clockfreq/1000000,(clockfreq/100000)%10,
loops_per_jiffy/(500000/HZ),(loops_per_jiffy/(5000/HZ))%100,
loops_per_jiffy));
}
int get_hardware_list(char *buffer)
{
int len = 0;
char model[80];
unsigned long mem;
int i;
if (mach_get_model)
mach_get_model(model);
else
strcpy(model, "Unknown m68k");
len += sprintf(buffer+len, "Model:\t\t%s\n", model);
len += get_cpuinfo(buffer+len);
for (mem = 0, i = 0; i < m68k_num_memory; i++)
mem += m68k_memory[i].size;
len += sprintf(buffer+len, "System Memory:\t%ldK\n", mem>>10);
if (mach_get_hardware_list)
len += mach_get_hardware_list(buffer+len);
return(len);
}
#if defined(CONFIG_AMIGA_FLOPPY) || defined(CONFIG_ATARI_FLOPPY)
void __init floppy_setup(char *str, int *ints)
{
if (mach_floppy_setup)
mach_floppy_setup (str, ints);
}
void floppy_eject(void)
{
if (mach_floppy_eject)
mach_floppy_eject();
}
#endif
/* for "kbd-reset" cmdline param */
void __init kbd_reset_setup(char *str, int *ints)
{
}
void arch_gettod(int *year, int *mon, int *day, int *hour,
int *min, int *sec)
{
if (mach_gettod)
mach_gettod(year, mon, day, hour, min, sec);
else
*year = *mon = *day = *hour = *min = *sec = 0;
}
void check_bugs(void)
{
#ifndef CONFIG_M68KFPU_EMU
if (m68k_fputype == 0) {
printk( KERN_EMERG "*** YOU DO NOT HAVE A FLOATING POINT UNIT, "
"WHICH IS REQUIRED BY LINUX/M68K ***\n" );
printk( KERN_EMERG "Upgrade your hardware or join the FPU "
"emulation project\n" );
printk( KERN_EMERG "(see http://no-fpu.linux-m68k.org)\n" );
panic( "no FPU" );
}
#endif /* CONFIG_SUN3 */
}
|