Viewing file:  config.c (27.97 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* linux/arch/m68k/amiga/config.c
*
* Copyright (C) 1993 Hamish Macdonald
*
* This file is subject to the terms and conditions of the GNU General Public
* License. See the file COPYING in the main directory of this archive
* for more details.
*/
/*
* Miscellaneous Amiga stuff
*/
#include <linux/config.h>
#include <linux/types.h>
#include <linux/kernel.h>
#include <linux/mm.h>
#include <linux/tty.h>
#include <linux/console.h>
#include <linux/init.h>
#ifdef CONFIG_ZORRO
#include <linux/zorro.h>
#endif
#include <asm/bootinfo.h>
#include <asm/setup.h>
#include <asm/system.h>
#include <asm/pgtable.h>
#include <asm/amigahw.h>
#include <asm/amigaints.h>
#include <asm/irq.h>
#include <asm/rtc.h>
#include <asm/keyboard.h>
#include <asm/machdep.h>
#include <asm/io.h>
unsigned long amiga_model;
unsigned long amiga_eclock;
unsigned long amiga_masterclock;
unsigned long amiga_colorclock;
unsigned long amiga_chipset;
unsigned char amiga_vblank;
unsigned char amiga_psfreq;
struct amiga_hw_present amiga_hw_present;
static char s_a500[] __initdata = "A500";
static char s_a500p[] __initdata = "A500+";
static char s_a600[] __initdata = "A600";
static char s_a1000[] __initdata = "A1000";
static char s_a1200[] __initdata = "A1200";
static char s_a2000[] __initdata = "A2000";
static char s_a2500[] __initdata = "A2500";
static char s_a3000[] __initdata = "A3000";
static char s_a3000t[] __initdata = "A3000T";
static char s_a3000p[] __initdata = "A3000+";
static char s_a4000[] __initdata = "A4000";
static char s_a4000t[] __initdata = "A4000T";
static char s_cdtv[] __initdata = "CDTV";
static char s_cd32[] __initdata = "CD32";
static char s_draco[] __initdata = "Draco";
static char *amiga_models[] __initdata = {
s_a500, s_a500p, s_a600, s_a1000, s_a1200, s_a2000, s_a2500, s_a3000,
s_a3000t, s_a3000p, s_a4000, s_a4000t, s_cdtv, s_cd32, s_draco,
};
static char amiga_model_name[13] = "Amiga ";
extern char m68k_debug_device[];
static void amiga_sched_init(void (*handler)(int, void *, struct pt_regs *));
/* amiga specific keyboard functions */
extern int amiga_keyb_init(void);
extern int amiga_kbdrate (struct kbd_repeat *);
extern int amiga_kbd_translate(unsigned char keycode, unsigned char *keycodep,
char raw_mode);
/* amiga specific irq functions */
extern void amiga_init_IRQ (void);
extern void (*amiga_default_handler[]) (int, void *, struct pt_regs *);
extern int amiga_request_irq (unsigned int irq,
void (*handler)(int, void *, struct pt_regs *),
unsigned long flags, const char *devname,
void *dev_id);
extern void amiga_free_irq (unsigned int irq, void *dev_id);
extern void amiga_enable_irq (unsigned int);
extern void amiga_disable_irq (unsigned int);
static void amiga_get_model(char *model);
static int amiga_get_hardware_list(char *buffer);
extern int amiga_get_irq_list (char *);
/* amiga specific timer functions */
static unsigned long amiga_gettimeoffset (void);
static void a3000_gettod (int *, int *, int *, int *, int *, int *);
static void a2000_gettod (int *, int *, int *, int *, int *, int *);
static int amiga_hwclk (int, struct hwclk_time *);
static int amiga_set_clock_mmss (unsigned long);
extern void amiga_mksound( unsigned int count, unsigned int ticks );
#ifdef CONFIG_AMIGA_FLOPPY
extern void amiga_floppy_setup(char *, int *);
#endif
static void amiga_reset (void);
static int amiga_wait_key (struct console *co);
extern void amiga_init_sound(void);
static void amiga_savekmsg_init(void);
static void amiga_mem_console_write(struct console *co, const char *b,
unsigned int count);
void amiga_serial_console_write(struct console *co, const char *s,
unsigned int count);
static void amiga_debug_init(void);
#ifdef CONFIG_HEARTBEAT
static void amiga_heartbeat(int on);
#endif
static struct console amiga_console_driver = {
name: "debug",
wait_key: amiga_wait_key,
flags: CON_PRINTBUFFER,
index: -1,
};
#ifdef CONFIG_MAGIC_SYSRQ
static char amiga_sysrq_xlate[128] =
"\0001234567890-=\\\000\000" /* 0x00 - 0x0f */
"qwertyuiop[]\000123" /* 0x10 - 0x1f */
"asdfghjkl;'\000\000456" /* 0x20 - 0x2f */
"\000zxcvbnm,./\000+789" /* 0x30 - 0x3f */
" \177\t\r\r\000\177\000\000\000-\000\000\000\000\000" /* 0x40 - 0x4f */
"\000\201\202\203\204\205\206\207\210\211()/*+\000" /* 0x50 - 0x5f */
"\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000" /* 0x60 - 0x6f */
"\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000\000"; /* 0x70 - 0x7f */
#endif
extern void (*kd_mksound)(unsigned int, unsigned int);
/*
* Motherboard Resources present in all Amiga models
*/
static struct {
struct resource _ciab, _ciaa, _custom, _kickstart;
} mb_resources = {
_ciab: { "CIA B", 0x00bfd000, 0x00bfdfff },
_ciaa: { "CIA A", 0x00bfe000, 0x00bfefff },
_custom: { "Custom I/O", 0x00dff000, 0x00dfffff },
_kickstart: { "Kickstart ROM", 0x00f80000, 0x00ffffff }
};
static struct resource rtc_resource = {
NULL, 0x00dc0000, 0x00dcffff
};
static struct resource ram_resource[NUM_MEMINFO];
/*
* Parse an Amiga-specific record in the bootinfo
*/
int amiga_parse_bootinfo(const struct bi_record *record)
{
int unknown = 0;
const unsigned long *data = record->data;
switch (record->tag) {
case BI_AMIGA_MODEL:
amiga_model = *data;
break;
case BI_AMIGA_ECLOCK:
amiga_eclock = *data;
break;
case BI_AMIGA_CHIPSET:
amiga_chipset = *data;
break;
case BI_AMIGA_CHIP_SIZE:
amiga_chip_size = *(const int *)data;
break;
case BI_AMIGA_VBLANK:
amiga_vblank = *(const unsigned char *)data;
break;
case BI_AMIGA_PSFREQ:
amiga_psfreq = *(const unsigned char *)data;
break;
case BI_AMIGA_AUTOCON:
#ifdef CONFIG_ZORRO
if (zorro_num_autocon < ZORRO_NUM_AUTO) {
const struct ConfigDev *cd = (struct ConfigDev *)data;
struct zorro_dev *dev = &zorro_autocon[zorro_num_autocon++];
dev->rom = cd->cd_Rom;
dev->slotaddr = cd->cd_SlotAddr;
dev->slotsize = cd->cd_SlotSize;
dev->resource.start = (unsigned long)cd->cd_BoardAddr;
dev->resource.end = dev->resource.start+cd->cd_BoardSize-1;
} else
printk("amiga_parse_bootinfo: too many AutoConfig devices\n");
#endif /* CONFIG_ZORRO */
break;
case BI_AMIGA_SERPER:
/* serial port period: ignored here */
break;
default:
unknown = 1;
}
return(unknown);
}
/*
* Identify builtin hardware
*/
static void __init amiga_identify(void)
{
/* Fill in some default values, if necessary */
if (amiga_eclock == 0)
amiga_eclock = 709379;
memset(&amiga_hw_present, 0, sizeof(amiga_hw_present));
printk("Amiga hardware found: ");
if (amiga_model >= AMI_500 && amiga_model <= AMI_DRACO) {
printk("[%s] ", amiga_models[amiga_model-AMI_500]);
strcat(amiga_model_name, amiga_models[amiga_model-AMI_500]);
}
switch(amiga_model) {
case AMI_UNKNOWN:
goto Generic;
case AMI_600:
case AMI_1200:
AMIGAHW_SET(A1200_IDE);
AMIGAHW_SET(PCMCIA);
case AMI_500:
case AMI_500PLUS:
case AMI_1000:
case AMI_2000:
case AMI_2500:
AMIGAHW_SET(A2000_CLK); /* Is this correct for all models? */
goto Generic;
case AMI_3000:
case AMI_3000T:
AMIGAHW_SET(AMBER_FF);
AMIGAHW_SET(MAGIC_REKICK);
/* fall through */
case AMI_3000PLUS:
AMIGAHW_SET(A3000_SCSI);
AMIGAHW_SET(A3000_CLK);
AMIGAHW_SET(ZORRO3);
goto Generic;
case AMI_4000T:
AMIGAHW_SET(A4000_SCSI);
/* fall through */
case AMI_4000:
AMIGAHW_SET(A4000_IDE);
AMIGAHW_SET(A3000_CLK);
AMIGAHW_SET(ZORRO3);
goto Generic;
case AMI_CDTV:
case AMI_CD32:
AMIGAHW_SET(CD_ROM);
AMIGAHW_SET(A2000_CLK); /* Is this correct? */
goto Generic;
Generic:
AMIGAHW_SET(AMI_VIDEO);
AMIGAHW_SET(AMI_BLITTER);
AMIGAHW_SET(AMI_AUDIO);
AMIGAHW_SET(AMI_FLOPPY);
AMIGAHW_SET(AMI_KEYBOARD);
AMIGAHW_SET(AMI_MOUSE);
AMIGAHW_SET(AMI_SERIAL);
AMIGAHW_SET(AMI_PARALLEL);
AMIGAHW_SET(CHIP_RAM);
AMIGAHW_SET(PAULA);
switch(amiga_chipset) {
case CS_OCS:
case CS_ECS:
case CS_AGA:
switch (custom.deniseid & 0xf) {
case 0x0c:
AMIGAHW_SET(DENISE_HR);
break;
case 0x08:
AMIGAHW_SET(LISA);
break;
}
break;
default:
AMIGAHW_SET(DENISE);
break;
}
switch ((custom.vposr>>8) & 0x7f) {
case 0x00:
AMIGAHW_SET(AGNUS_PAL);
break;
case 0x10:
AMIGAHW_SET(AGNUS_NTSC);
break;
case 0x20:
case 0x21:
AMIGAHW_SET(AGNUS_HR_PAL);
break;
case 0x30:
case 0x31:
AMIGAHW_SET(AGNUS_HR_NTSC);
break;
case 0x22:
case 0x23:
AMIGAHW_SET(ALICE_PAL);
break;
case 0x32:
case 0x33:
AMIGAHW_SET(ALICE_NTSC);
break;
}
AMIGAHW_SET(ZORRO);
break;
case AMI_DRACO:
panic("No support for Draco yet");
default:
panic("Unknown Amiga Model");
}
#define AMIGAHW_ANNOUNCE(name, str) \
if (AMIGAHW_PRESENT(name)) \
printk(str)
AMIGAHW_ANNOUNCE(AMI_VIDEO, "VIDEO ");
AMIGAHW_ANNOUNCE(AMI_BLITTER, "BLITTER ");
AMIGAHW_ANNOUNCE(AMBER_FF, "AMBER_FF ");
AMIGAHW_ANNOUNCE(AMI_AUDIO, "AUDIO ");
AMIGAHW_ANNOUNCE(AMI_FLOPPY, "FLOPPY ");
AMIGAHW_ANNOUNCE(A3000_SCSI, "A3000_SCSI ");
AMIGAHW_ANNOUNCE(A4000_SCSI, "A4000_SCSI ");
AMIGAHW_ANNOUNCE(A1200_IDE, "A1200_IDE ");
AMIGAHW_ANNOUNCE(A4000_IDE, "A4000_IDE ");
AMIGAHW_ANNOUNCE(CD_ROM, "CD_ROM ");
AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "KEYBOARD ");
AMIGAHW_ANNOUNCE(AMI_MOUSE, "MOUSE ");
AMIGAHW_ANNOUNCE(AMI_SERIAL, "SERIAL ");
AMIGAHW_ANNOUNCE(AMI_PARALLEL, "PARALLEL ");
AMIGAHW_ANNOUNCE(A2000_CLK, "A2000_CLK ");
AMIGAHW_ANNOUNCE(A3000_CLK, "A3000_CLK ");
AMIGAHW_ANNOUNCE(CHIP_RAM, "CHIP_RAM ");
AMIGAHW_ANNOUNCE(PAULA, "PAULA ");
AMIGAHW_ANNOUNCE(DENISE, "DENISE ");
AMIGAHW_ANNOUNCE(DENISE_HR, "DENISE_HR ");
AMIGAHW_ANNOUNCE(LISA, "LISA ");
AMIGAHW_ANNOUNCE(AGNUS_PAL, "AGNUS_PAL ");
AMIGAHW_ANNOUNCE(AGNUS_NTSC, "AGNUS_NTSC ");
AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "AGNUS_HR_PAL ");
AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "AGNUS_HR_NTSC ");
AMIGAHW_ANNOUNCE(ALICE_PAL, "ALICE_PAL ");
AMIGAHW_ANNOUNCE(ALICE_NTSC, "ALICE_NTSC ");
AMIGAHW_ANNOUNCE(MAGIC_REKICK, "MAGIC_REKICK ");
AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA ");
if (AMIGAHW_PRESENT(ZORRO))
printk("ZORRO%s ", AMIGAHW_PRESENT(ZORRO3) ? "3" : "");
printk("\n");
#undef AMIGAHW_ANNOUNCE
}
/*
* Setup the Amiga configuration info
*/
void __init config_amiga(void)
{
int i;
amiga_debug_init();
amiga_identify();
/* Yuk, we don't have PCI memory */
iomem_resource.name = "Memory";
for (i = 0; i < 4; i++)
request_resource(&iomem_resource, &((struct resource *)&mb_resources)[i]);
mach_sched_init = amiga_sched_init;
mach_keyb_init = amiga_keyb_init;
mach_kbdrate = amiga_kbdrate;
mach_kbd_translate = amiga_kbd_translate;
SYSRQ_KEY = 0xff;
mach_init_IRQ = amiga_init_IRQ;
mach_default_handler = &amiga_default_handler;
mach_request_irq = amiga_request_irq;
mach_free_irq = amiga_free_irq;
enable_irq = amiga_enable_irq;
disable_irq = amiga_disable_irq;
mach_get_model = amiga_get_model;
mach_get_hardware_list = amiga_get_hardware_list;
mach_get_irq_list = amiga_get_irq_list;
mach_gettimeoffset = amiga_gettimeoffset;
if (AMIGAHW_PRESENT(A3000_CLK)){
mach_gettod = a3000_gettod;
rtc_resource.name = "A3000 RTC";
request_resource(&iomem_resource, &rtc_resource);
}
else{ /* if (AMIGAHW_PRESENT(A2000_CLK)) */
mach_gettod = a2000_gettod;
rtc_resource.name = "A2000 RTC";
request_resource(&iomem_resource, &rtc_resource);
}
mach_max_dma_address = 0xffffffff; /*
* default MAX_DMA=0xffffffff
* on all machines. If we don't
* do so, the SCSI code will not
* be able to allocate any mem
* for transfers, unless we are
* dealing with a Z2 mem only
* system. /Jes
*/
mach_hwclk = amiga_hwclk;
mach_set_clock_mmss = amiga_set_clock_mmss;
#ifdef CONFIG_AMIGA_FLOPPY
mach_floppy_setup = amiga_floppy_setup;
#endif
mach_reset = amiga_reset;
#ifdef CONFIG_DUMMY_CONSOLE
conswitchp = &dummy_con;
#endif
kd_mksound = amiga_mksound;
#ifdef CONFIG_MAGIC_SYSRQ
mach_sysrq_key = 0x5f; /* HELP */
mach_sysrq_shift_state = 0x03; /* SHIFT+ALTGR */
mach_sysrq_shift_mask = 0xff; /* all modifiers except CapsLock */
mach_sysrq_xlate = amiga_sysrq_xlate;
#endif
#ifdef CONFIG_HEARTBEAT
mach_heartbeat = amiga_heartbeat;
#endif
/* Fill in the clock values (based on the 700 kHz E-Clock) */
amiga_masterclock = 40*amiga_eclock; /* 28 MHz */
amiga_colorclock = 5*amiga_eclock; /* 3.5 MHz */
/* clear all DMA bits */
custom.dmacon = DMAF_ALL;
/* ensure that the DMA master bit is set */
custom.dmacon = DMAF_SETCLR | DMAF_MASTER;
/* don't use Z2 RAM as system memory on Z3 capable machines */
if (AMIGAHW_PRESENT(ZORRO3)) {
int i, j;
u32 disabled_z2mem = 0;
for (i = 0; i < m68k_num_memory; i++)
if (m68k_memory[i].addr < 16*1024*1024) {
if (i == 0) {
/* don't cut off the branch we're sitting on */
printk("Warning: kernel runs in Zorro II memory\n");
continue;
}
disabled_z2mem += m68k_memory[i].size;
m68k_num_memory--;
for (j = i; j < m68k_num_memory; j++)
m68k_memory[j] = m68k_memory[j+1];
i--;
}
if (disabled_z2mem)
printk("%dK of Zorro II memory will not be used as system memory\n",
disabled_z2mem>>10);
}
/* request all RAM */
for (i = 0; i < m68k_num_memory; i++) {
ram_resource[i].name =
(m68k_memory[i].addr >= 0x01000000) ? "32-bit Fast RAM" :
(m68k_memory[i].addr < 0x00c00000) ? "16-bit Fast RAM" :
"16-bit Slow RAM";
ram_resource[i].start = m68k_memory[i].addr;
ram_resource[i].end = m68k_memory[i].addr+m68k_memory[i].size-1;
request_resource(&iomem_resource, &ram_resource[i]);
}
/* initialize chipram allocator */
amiga_chip_init ();
/* debugging using chipram */
if (!strcmp( m68k_debug_device, "mem" )){
if (!AMIGAHW_PRESENT(CHIP_RAM))
printk("Warning: no chipram present for debugging\n");
else {
amiga_savekmsg_init();
amiga_console_driver.write = amiga_mem_console_write;
register_console(&amiga_console_driver);
}
}
/* our beloved beeper */
if (AMIGAHW_PRESENT(AMI_AUDIO))
amiga_init_sound();
/*
* if it is an A3000, set the magic bit that forces
* a hard rekick
*/
if (AMIGAHW_PRESENT(MAGIC_REKICK))
*(unsigned char *)ZTWO_VADDR(0xde0002) |= 0x80;
}
static unsigned short jiffy_ticks;
static void __init amiga_sched_init(void (*timer_routine)(int, void *,
struct pt_regs *))
{
static struct resource sched_res = {
"timer", 0x00bfd400, 0x00bfd5ff,
};
jiffy_ticks = (amiga_eclock+HZ/2)/HZ;
if (request_resource(&mb_resources._ciab, &sched_res))
printk("Cannot allocate ciab.ta{lo,hi}\n");
ciab.cra &= 0xC0; /* turn off timer A, continuous mode, from Eclk */
ciab.talo = jiffy_ticks % 256;
ciab.tahi = jiffy_ticks / 256;
/* install interrupt service routine for CIAB Timer A
*
* Please don't change this to use ciaa, as it interferes with the
* SCSI code. We'll have to take a look at this later
*/
request_irq(IRQ_AMIGA_CIAB_TA, timer_routine, 0, "timer", NULL);
/* start timer */
ciab.cra |= 0x11;
}
#define TICK_SIZE 10000
/* This is always executed with interrupts disabled. */
static unsigned long amiga_gettimeoffset (void)
{
unsigned short hi, lo, hi2;
unsigned long ticks, offset = 0;
/* read CIA B timer A current value */
hi = ciab.tahi;
lo = ciab.talo;
hi2 = ciab.tahi;
if (hi != hi2) {
lo = ciab.talo;
hi = hi2;
}
ticks = hi << 8 | lo;
if (ticks > jiffy_ticks / 2)
/* check for pending interrupt */
if (cia_set_irq(&ciab_base, 0) & CIA_ICR_TA)
offset = 10000;
ticks = jiffy_ticks - ticks;
ticks = (10000 * ticks) / jiffy_ticks;
return ticks + offset;
}
static void a3000_gettod (int *yearp, int *monp, int *dayp,
int *hourp, int *minp, int *secp)
{
volatile struct tod3000 *tod = TOD_3000;
tod->cntrl1 = TOD3000_CNTRL1_HOLD;
*secp = tod->second1 * 10 + tod->second2;
*minp = tod->minute1 * 10 + tod->minute2;
*hourp = tod->hour1 * 10 + tod->hour2;
*dayp = tod->day1 * 10 + tod->day2;
*monp = tod->month1 * 10 + tod->month2;
*yearp = tod->year1 * 10 + tod->year2;
tod->cntrl1 = TOD3000_CNTRL1_FREE;
}
static void a2000_gettod (int *yearp, int *monp, int *dayp,
int *hourp, int *minp, int *secp)
{
volatile struct tod2000 *tod = TOD_2000;
tod->cntrl1 = TOD2000_CNTRL1_HOLD;
while (tod->cntrl1 & TOD2000_CNTRL1_BUSY)
;
*secp = tod->second1 * 10 + tod->second2;
*minp = tod->minute1 * 10 + tod->minute2;
*hourp = (tod->hour1 & 3) * 10 + tod->hour2;
*dayp = tod->day1 * 10 + tod->day2;
*monp = tod->month1 * 10 + tod->month2;
*yearp = tod->year1 * 10 + tod->year2;
if (!(tod->cntrl3 & TOD2000_CNTRL3_24HMODE)){
if (!(tod->hour1 & TOD2000_HOUR1_PM) && *hourp == 12)
*hourp = 0;
else if ((tod->hour1 & TOD2000_HOUR1_PM) && *hourp != 12)
*hourp += 12;
}
tod->cntrl1 &= ~TOD2000_CNTRL1_HOLD;
}
static int amiga_hwclk(int op, struct hwclk_time *t)
{
if (AMIGAHW_PRESENT(A3000_CLK)) {
volatile struct tod3000 *tod = TOD_3000;
tod->cntrl1 = TOD3000_CNTRL1_HOLD;
if (!op) { /* read */
t->sec = tod->second1 * 10 + tod->second2;
t->min = tod->minute1 * 10 + tod->minute2;
t->hour = tod->hour1 * 10 + tod->hour2;
t->day = tod->day1 * 10 + tod->day2;
t->wday = tod->weekday;
t->mon = tod->month1 * 10 + tod->month2 - 1;
t->year = tod->year1 * 10 + tod->year2;
if (t->year <= 69)
t->year += 100;
} else {
tod->second1 = t->sec / 10;
tod->second2 = t->sec % 10;
tod->minute1 = t->min / 10;
tod->minute2 = t->min % 10;
tod->hour1 = t->hour / 10;
tod->hour2 = t->hour % 10;
tod->day1 = t->day / 10;
tod->day2 = t->day % 10;
if (t->wday != -1)
tod->weekday = t->wday;
tod->month1 = (t->mon + 1) / 10;
tod->month2 = (t->mon + 1) % 10;
if (t->year >= 100)
t->year -= 100;
tod->year1 = t->year / 10;
tod->year2 = t->year % 10;
}
tod->cntrl1 = TOD3000_CNTRL1_FREE;
} else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
volatile struct tod2000 *tod = TOD_2000;
tod->cntrl1 = TOD2000_CNTRL1_HOLD;
while (tod->cntrl1 & TOD2000_CNTRL1_BUSY)
;
if (!op) { /* read */
t->sec = tod->second1 * 10 + tod->second2;
t->min = tod->minute1 * 10 + tod->minute2;
t->hour = (tod->hour1 & 3) * 10 + tod->hour2;
t->day = tod->day1 * 10 + tod->day2;
t->wday = tod->weekday;
t->mon = tod->month1 * 10 + tod->month2 - 1;
t->year = tod->year1 * 10 + tod->year2;
if (t->year <= 69)
t->year += 100;
if (!(tod->cntrl3 & TOD2000_CNTRL3_24HMODE)){
if (!(tod->hour1 & TOD2000_HOUR1_PM) && t->hour == 12)
t->hour = 0;
else if ((tod->hour1 & TOD2000_HOUR1_PM) && t->hour != 12)
t->hour += 12;
}
} else {
tod->second1 = t->sec / 10;
tod->second2 = t->sec % 10;
tod->minute1 = t->min / 10;
tod->minute2 = t->min % 10;
if (tod->cntrl3 & TOD2000_CNTRL3_24HMODE)
tod->hour1 = t->hour / 10;
else if (t->hour >= 12)
tod->hour1 = TOD2000_HOUR1_PM +
(t->hour - 12) / 10;
else
tod->hour1 = t->hour / 10;
tod->hour2 = t->hour % 10;
tod->day1 = t->day / 10;
tod->day2 = t->day % 10;
if (t->wday != -1)
tod->weekday = t->wday;
tod->month1 = (t->mon + 1) / 10;
tod->month2 = (t->mon + 1) % 10;
if (t->year >= 100)
t->year -= 100;
tod->year1 = t->year / 10;
tod->year2 = t->year % 10;
}
tod->cntrl1 &= ~TOD2000_CNTRL1_HOLD;
}
return 0;
}
static int amiga_set_clock_mmss (unsigned long nowtime)
{
short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
if (AMIGAHW_PRESENT(A3000_CLK)) {
volatile struct tod3000 *tod = TOD_3000;
tod->cntrl1 = TOD3000_CNTRL1_HOLD;
tod->second1 = real_seconds / 10;
tod->second2 = real_seconds % 10;
tod->minute1 = real_minutes / 10;
tod->minute2 = real_minutes % 10;
tod->cntrl1 = TOD3000_CNTRL1_FREE;
} else /* if (AMIGAHW_PRESENT(A2000_CLK)) */ {
volatile struct tod2000 *tod = TOD_2000;
tod->cntrl1 = TOD2000_CNTRL1_HOLD;
while (tod->cntrl1 & TOD2000_CNTRL1_BUSY)
;
tod->second1 = real_seconds / 10;
tod->second2 = real_seconds % 10;
tod->minute1 = real_minutes / 10;
tod->minute2 = real_minutes % 10;
tod->cntrl1 &= ~TOD2000_CNTRL1_HOLD;
}
return 0;
}
static int amiga_wait_key (struct console *co)
{
int i;
while (1) {
while (ciaa.pra & 0x40);
/* debounce */
for (i = 0; i < 1000; i++);
if (!(ciaa.pra & 0x40))
break;
}
/* wait for button up */
while (1) {
while (!(ciaa.pra & 0x40));
/* debounce */
for (i = 0; i < 1000; i++);
if (ciaa.pra & 0x40)
break;
}
return 0;
}
static NORET_TYPE void amiga_reset( void )
ATTRIB_NORET;
static void amiga_reset (void)
{
unsigned long jmp_addr040 = virt_to_phys(&&jmp_addr_label040);
unsigned long jmp_addr = virt_to_phys(&&jmp_addr_label);
cli();
if (CPU_IS_040_OR_060)
/* Setup transparent translation registers for mapping
* of 16 MB kernel segment before disabling translation
*/
__asm__ __volatile__
("movel %0,%/d0\n\t"
"andl #0xff000000,%/d0\n\t"
"orw #0xe020,%/d0\n\t" /* map 16 MB, enable, cacheable */
".chip 68040\n\t"
"movec %%d0,%%itt0\n\t"
"movec %%d0,%%dtt0\n\t"
".chip 68k\n\t"
"jmp %0@\n\t"
: /* no outputs */
: "a" (jmp_addr040));
else
/* for 680[23]0, just disable translation and jump to the physical
* address of the label
*/
__asm__ __volatile__
("pmove %/tc,%@\n\t"
"bclr #7,%@\n\t"
"pmove %@,%/tc\n\t"
"jmp %0@\n\t"
: /* no outputs */
: "a" (jmp_addr));
jmp_addr_label040:
/* disable translation on '040 now */
__asm__ __volatile__
("moveq #0,%/d0\n\t"
".chip 68040\n\t"
"movec %%d0,%%tc\n\t" /* disable MMU */
".chip 68k\n\t"
: /* no outputs */
: /* no inputs */
: "d0");
jmp_addr_label:
/* pickup reset address from AmigaOS ROM, reset devices and jump
* to reset address
*/
__asm__ __volatile__
("movew #0x2700,%/sr\n\t"
"leal 0x01000000,%/a0\n\t"
"subl %/a0@(-0x14),%/a0\n\t"
"movel %/a0@(4),%/a0\n\t"
"subql #2,%/a0\n\t"
"bra 1f\n\t"
/* align on a longword boundary */
__ALIGN_STR "\n"
"1:\n\t"
"reset\n\t"
"jmp %/a0@" : /* Just that gcc scans it for % escapes */ );
for (;;);
}
/*
* Debugging
*/
#define SAVEKMSG_MAXMEM 128*1024
#define SAVEKMSG_MAGIC1 0x53415645 /* 'SAVE' */
#define SAVEKMSG_MAGIC2 0x4B4D5347 /* 'KMSG' */
struct savekmsg {
unsigned long magic1; /* SAVEKMSG_MAGIC1 */
unsigned long magic2; /* SAVEKMSG_MAGIC2 */
unsigned long magicptr; /* address of magic1 */
unsigned long size;
char data[0];
};
static struct savekmsg *savekmsg = NULL;
static void amiga_mem_console_write(struct console *co, const char *s,
unsigned int count)
{
if (savekmsg->size+count <= SAVEKMSG_MAXMEM-sizeof(struct savekmsg)) {
memcpy(savekmsg->data+savekmsg->size, s, count);
savekmsg->size += count;
}
}
static void amiga_savekmsg_init(void)
{
static struct resource debug_res = { "Debug" };
savekmsg = amiga_chip_alloc_res(SAVEKMSG_MAXMEM, &debug_res);
savekmsg->magic1 = SAVEKMSG_MAGIC1;
savekmsg->magic2 = SAVEKMSG_MAGIC2;
savekmsg->magicptr = virt_to_phys(savekmsg);
savekmsg->size = 0;
}
static void amiga_serial_putc(char c)
{
custom.serdat = (unsigned char)c | 0x100;
while (!(custom.serdatr & 0x2000))
;
}
void amiga_serial_console_write(struct console *co, const char *s,
unsigned int count)
{
while (count--) {
if (*s == '\n')
amiga_serial_putc('\r');
amiga_serial_putc(*s++);
}
}
#ifdef CONFIG_SERIAL_CONSOLE
void amiga_serial_puts(const char *s)
{
amiga_serial_console_write(NULL, s, strlen(s));
}
int amiga_serial_console_wait_key(struct console *co)
{
int ch;
while (!(custom.intreqr & IF_RBF))
barrier();
ch = custom.serdatr & 0xff;
/* clear the interrupt, so that another character can be read */
custom.intreq = IF_RBF;
return ch;
}
void amiga_serial_gets(struct console *co, char *s, int len)
{
int ch, cnt = 0;
while (1) {
ch = amiga_serial_console_wait_key(co);
/* Check for backspace. */
if (ch == 8 || ch == 127) {
if (cnt == 0) {
amiga_serial_putc('\007');
continue;
}
cnt--;
amiga_serial_puts("\010 \010");
continue;
}
/* Check for enter. */
if (ch == 10 || ch == 13)
break;
/* See if line is too long. */
if (cnt >= len + 1) {
amiga_serial_putc(7);
cnt--;
continue;
}
/* Store and echo character. */
s[cnt++] = ch;
amiga_serial_putc(ch);
}
/* Print enter. */
amiga_serial_puts("\r\n");
s[cnt] = 0;
}
#endif
static void __init amiga_debug_init(void)
{
if (!strcmp( m68k_debug_device, "ser" )) {
/* no initialization required (?) */
amiga_console_driver.write = amiga_serial_console_write;
register_console(&amiga_console_driver);
}
}
#ifdef CONFIG_HEARTBEAT
static void amiga_heartbeat(int on)
{
if (on)
ciaa.pra &= ~2;
else
ciaa.pra |= 2;
}
#endif
/*
* Amiga specific parts of /proc
*/
static void amiga_get_model(char *model)
{
strcpy(model, amiga_model_name);
}
static int amiga_get_hardware_list(char *buffer)
{
int len = 0;
if (AMIGAHW_PRESENT(CHIP_RAM))
len += sprintf(buffer+len, "Chip RAM:\t%ldK\n", amiga_chip_size>>10);
len += sprintf(buffer+len, "PS Freq:\t%dHz\nEClock Freq:\t%ldHz\n",
amiga_psfreq, amiga_eclock);
if (AMIGAHW_PRESENT(AMI_VIDEO)) {
char *type;
switch(amiga_chipset) {
case CS_OCS:
type = "OCS";
break;
case CS_ECS:
type = "ECS";
break;
case CS_AGA:
type = "AGA";
break;
default:
type = "Old or Unknown";
break;
}
len += sprintf(buffer+len, "Graphics:\t%s\n", type);
}
#define AMIGAHW_ANNOUNCE(name, str) \
if (AMIGAHW_PRESENT(name)) \
len += sprintf (buffer+len, "\t%s\n", str)
len += sprintf (buffer + len, "Detected hardware:\n");
AMIGAHW_ANNOUNCE(AMI_VIDEO, "Amiga Video");
AMIGAHW_ANNOUNCE(AMI_BLITTER, "Blitter");
AMIGAHW_ANNOUNCE(AMBER_FF, "Amber Flicker Fixer");
AMIGAHW_ANNOUNCE(AMI_AUDIO, "Amiga Audio");
AMIGAHW_ANNOUNCE(AMI_FLOPPY, "Floppy Controller");
AMIGAHW_ANNOUNCE(A3000_SCSI, "SCSI Controller WD33C93 (A3000 style)");
AMIGAHW_ANNOUNCE(A4000_SCSI, "SCSI Controller NCR53C710 (A4000T style)");
AMIGAHW_ANNOUNCE(A1200_IDE, "IDE Interface (A1200 style)");
AMIGAHW_ANNOUNCE(A4000_IDE, "IDE Interface (A4000 style)");
AMIGAHW_ANNOUNCE(CD_ROM, "Internal CD ROM drive");
AMIGAHW_ANNOUNCE(AMI_KEYBOARD, "Keyboard");
AMIGAHW_ANNOUNCE(AMI_MOUSE, "Mouse Port");
AMIGAHW_ANNOUNCE(AMI_SERIAL, "Serial Port");
AMIGAHW_ANNOUNCE(AMI_PARALLEL, "Parallel Port");
AMIGAHW_ANNOUNCE(A2000_CLK, "Hardware Clock (A2000 style)");
AMIGAHW_ANNOUNCE(A3000_CLK, "Hardware Clock (A3000 style)");
AMIGAHW_ANNOUNCE(CHIP_RAM, "Chip RAM");
AMIGAHW_ANNOUNCE(PAULA, "Paula 8364");
AMIGAHW_ANNOUNCE(DENISE, "Denise 8362");
AMIGAHW_ANNOUNCE(DENISE_HR, "Denise 8373");
AMIGAHW_ANNOUNCE(LISA, "Lisa 8375");
AMIGAHW_ANNOUNCE(AGNUS_PAL, "Normal/Fat PAL Agnus 8367/8371");
AMIGAHW_ANNOUNCE(AGNUS_NTSC, "Normal/Fat NTSC Agnus 8361/8370");
AMIGAHW_ANNOUNCE(AGNUS_HR_PAL, "Fat Hires PAL Agnus 8372");
AMIGAHW_ANNOUNCE(AGNUS_HR_NTSC, "Fat Hires NTSC Agnus 8372");
AMIGAHW_ANNOUNCE(ALICE_PAL, "PAL Alice 8374");
AMIGAHW_ANNOUNCE(ALICE_NTSC, "NTSC Alice 8374");
AMIGAHW_ANNOUNCE(MAGIC_REKICK, "Magic Hard Rekick");
AMIGAHW_ANNOUNCE(PCMCIA, "PCMCIA Slot");
#ifdef CONFIG_ZORRO
if (AMIGAHW_PRESENT(ZORRO))
len += sprintf(buffer+len, "\tZorro II%s AutoConfig: %d Expansion "
"Device%s\n",
AMIGAHW_PRESENT(ZORRO3) ? "I" : "",
zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s");
#endif /* CONFIG_ZORRO */
#undef AMIGAHW_ANNOUNCE
return(len);
}
|