Viewing file:  irq.c (2.01 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* linux/arch/arm/mach-epxa10db/irq.c
*
* Copyright (C) 2001 Altera Corporation
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation; either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#include <linux/init.h>
#include <asm/hardware.h>
#include <asm/irq.h>
#include <asm/io.h>
#include <asm/mach/irq.h>
#include <asm/arch/platform.h>
#include <asm/arch/int_ctrl00.h>
static void mask_irq(unsigned int irq)
{
__raw_writel(1 << irq, INT_MC(IO_ADDRESS(EXC_INT_CTRL00_BASE)));
}
static void unmask_irq(unsigned int irq)
{
__raw_writel(1 << irq, INT_MS(IO_ADDRESS(EXC_INT_CTRL00_BASE)));
}
void __init epxa10db_init_irq(void)
{
unsigned int i;
/*
* This bit sets up the interrupt controller using
* the 6 PLD interrupts mode (the default) each
* irqs is assigned a priority which is the same
* as its interrupt number. This scheme is used because
* its easy, but you may want to change it depending
* on the contents of your PLD
*/
__raw_writel(3,INT_MODE(IO_ADDRESS(EXC_INT_CTRL00_BASE)));
for (i = 0; i < NR_IRQS; i++){
__raw_writel(i+1, INT_PRIORITY_P0(IO_ADDRESS(EXC_INT_CTRL00_BASE)) + (4*i));
}
for (i = 0; i < NR_IRQS; i++) {
irq_desc[i].valid = 1;
irq_desc[i].probe_ok = 1;
irq_desc[i].mask_ack = mask_irq;
irq_desc[i].mask = mask_irq;
irq_desc[i].unmask = unmask_irq;
}
/* Disable all interrupt */
__raw_writel(-1,INT_MC(IO_ADDRESS(EXC_INT_CTRL00_BASE)));
}
|