Viewing file:  sys_sx164.c (4.4 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* linux/arch/alpha/kernel/sys_sx164.c
*
* Copyright (C) 1995 David A Rusling
* Copyright (C) 1996 Jay A Estabrook
* Copyright (C) 1998, 1999, 2000 Richard Henderson
*
* Code supporting the SX164 (PCA56+PYXIS).
*/
#include <linux/kernel.h>
#include <linux/types.h>
#include <linux/mm.h>
#include <linux/sched.h>
#include <linux/pci.h>
#include <linux/init.h>
#include <asm/ptrace.h>
#include <asm/system.h>
#include <asm/dma.h>
#include <asm/irq.h>
#include <asm/bitops.h>
#include <asm/mmu_context.h>
#include <asm/io.h>
#include <asm/pgtable.h>
#include <asm/core_cia.h>
#include <asm/hwrpb.h>
#include "proto.h"
#include "irq_impl.h"
#include "pci_impl.h"
#include "machvec_impl.h"
static void __init
sx164_init_irq(void)
{
outb(0, DMA1_RESET_REG);
outb(0, DMA2_RESET_REG);
outb(DMA_MODE_CASCADE, DMA2_MODE_REG);
outb(0, DMA2_MASK_REG);
if (alpha_using_srm)
alpha_mv.device_interrupt = srm_device_interrupt;
init_i8259a_irqs();
/* Not interested in the bogus interrupts (0,3,4,5,40-47),
NMI (1), or HALT (2). */
if (alpha_using_srm)
init_srm_irqs(40, 0x3f0000);
else
init_pyxis_irqs(0xff00003f0000);
setup_irq(16+6, &timer_cascade_irqaction);
}
/*
* PCI Fixup configuration.
*
* Summary @ PYXIS_INT_REQ:
* Bit Meaning
* 0 RSVD
* 1 NMI
* 2 Halt/Reset switch
* 3 MBZ
* 4 RAZ
* 5 RAZ
* 6 Interval timer (RTC)
* 7 PCI-ISA Bridge
* 8 Interrupt Line A from slot 3
* 9 Interrupt Line A from slot 2
*10 Interrupt Line A from slot 1
*11 Interrupt Line A from slot 0
*12 Interrupt Line B from slot 3
*13 Interrupt Line B from slot 2
*14 Interrupt Line B from slot 1
*15 Interrupt line B from slot 0
*16 Interrupt Line C from slot 3
*17 Interrupt Line C from slot 2
*18 Interrupt Line C from slot 1
*19 Interrupt Line C from slot 0
*20 Interrupt Line D from slot 3
*21 Interrupt Line D from slot 2
*22 Interrupt Line D from slot 1
*23 Interrupt Line D from slot 0
*
* IdSel
* 5 32 bit PCI option slot 2
* 6 64 bit PCI option slot 0
* 7 64 bit PCI option slot 1
* 8 Cypress I/O
* 9 32 bit PCI option slot 3
*/
static int __init
sx164_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
{
static char irq_tab[5][5] __initdata = {
/*INT INTA INTB INTC INTD */
{ 16+ 9, 16+ 9, 16+13, 16+17, 16+21}, /* IdSel 5 slot 2 J17 */
{ 16+11, 16+11, 16+15, 16+19, 16+23}, /* IdSel 6 slot 0 J19 */
{ 16+10, 16+10, 16+14, 16+18, 16+22}, /* IdSel 7 slot 1 J18 */
{ -1, -1, -1, -1, -1}, /* IdSel 8 SIO */
{ 16+ 8, 16+ 8, 16+12, 16+16, 16+20} /* IdSel 9 slot 3 J15 */
};
const long min_idsel = 5, max_idsel = 9, irqs_per_slot = 5;
return COMMON_TABLE_LOOKUP;
}
static void __init
sx164_init_pci(void)
{
cia_init_pci();
SMC669_Init(0);
}
static void __init
sx164_init_arch(void)
{
/*
* OSF palcode v1.23 forgets to enable PCA56 Motion Video
* Instructions. Let's enable it.
* We have to check palcode revision because CSERVE interface
* is subject to change without notice. For example, it
* has been changed completely since v1.16 (found in MILO
* distribution). -ink
*/
struct percpu_struct *cpu = (struct percpu_struct*)
((char*)hwrpb + hwrpb->processor_offset);
if (amask(AMASK_MAX) != 0
&& alpha_using_srm
&& (cpu->pal_revision & 0xffff) == 0x117) {
__asm__ __volatile__(
"lda $16,8($31)\n"
"call_pal 9\n" /* Allow PALRES insns in kernel mode */
".long 0x64000118\n\n" /* hw_mfpr $0,icsr */
"ldah $16,(1<<(19-16))($31)\n"
"or $0,$16,$0\n" /* set MVE bit */
".long 0x74000118\n" /* hw_mtpr $0,icsr */
"lda $16,9($31)\n"
"call_pal 9" /* Disable PALRES insns */
: : : "$0", "$16");
printk("PCA56 MVI set enabled\n");
}
pyxis_init_arch();
}
/*
* The System Vector
*/
struct alpha_machine_vector sx164_mv __initmv = {
vector_name: "SX164",
DO_EV5_MMU,
DO_DEFAULT_RTC,
DO_PYXIS_IO,
DO_CIA_BUS,
machine_check: cia_machine_check,
max_dma_address: ALPHA_MAX_DMA_ADDRESS,
min_io_address: DEFAULT_IO_BASE,
min_mem_address: DEFAULT_MEM_BASE,
pci_dac_offset: PYXIS_DAC_OFFSET,
nr_irqs: 48,
device_interrupt: pyxis_device_interrupt,
init_arch: sx164_init_arch,
init_irq: sx164_init_irq,
init_rtc: common_init_rtc,
init_pci: sx164_init_pci,
kill_arch: NULL,
pci_map_irq: sx164_map_irq,
pci_swizzle: common_swizzle,
};
ALIAS_MV(sx164)
|