!C99Shell v. 1.0 pre-release build #13!

Software: Apache/2.0.54 (Unix) mod_perl/1.99_09 Perl/v5.8.0 mod_ssl/2.0.54 OpenSSL/0.9.7l DAV/2 FrontPage/5.0.2.2635 PHP/4.4.0 mod_gzip/2.0.26.1a 

uname -a: Linux snow.he.net 4.4.276-v2-mono-1 #1 SMP Wed Jul 21 11:21:17 PDT 2021 i686 

uid=99(nobody) gid=98(nobody) groups=98(nobody) 

Safe-mode: OFF (not secure)

/usr/src/linux-2.4.18-xfs-1.1/arch/alpha/kernel/   drwxr-xr-x
Free 318.37 GB of 458.09 GB (69.5%)
Home    Back    Forward    UPDIR    Refresh    Search    Buffer    Encoder    Tools    Proc.    FTP brute    Sec.    SQL    PHP-code    Update    Feedback    Self remove    Logout    


Viewing file:     irq_alpha.c (6.51 KB)      -rw-r--r--
Select action/file-type:
(+) | (+) | (+) | Code (+) | Session (+) | (+) | SDB (+) | (+) | (+) | (+) | (+) | (+) |
/*
 * Alpha specific irq code.
 */

#include <linux/config.h>
#include <linux/init.h>
#include <linux/sched.h>
#include <linux/irq.h>
#include <linux/kernel_stat.h>

#include <asm/machvec.h>
#include <asm/dma.h>

#include "proto.h"
#include "irq_impl.h"

#ifndef CONFIG_SMP
unsigned long __irq_attempt[NR_IRQS];
#endif

/* Hack minimum IPL during interrupt processing for broken hardware.  */
#ifdef CONFIG_ALPHA_BROKEN_IRQ_MASK
int __min_ipl;
#endif

/*
 * Performance counter hook.  A module can override this to
 * do something useful.
 */
static void
dummy_perf(unsigned long vector, struct pt_regs *regs)
{
    irq_err_count++;
    printk(KERN_CRIT "Performance counter interrupt!\n");
}

void (*perf_irq)(unsigned long, struct pt_regs *) = dummy_perf;

/*
 * The main interrupt entry point.
 */

asmlinkage void 
do_entInt(unsigned long type, unsigned long vector, unsigned long la_ptr,
      unsigned long a3, unsigned long a4, unsigned long a5,
      struct pt_regs regs)
{
    switch (type) {
    case 0:
#ifdef CONFIG_SMP
        handle_ipi(&regs);
        return;
#else
        irq_err_count++;
        printk(KERN_CRIT "Interprocessor interrupt? "
               "You must be kidding!\n");
#endif
        break;
    case 1:
#ifdef CONFIG_SMP
      {
        long cpu;
        smp_percpu_timer_interrupt(&regs);
        cpu = smp_processor_id();
        if (cpu != boot_cpuid) {
                irq_attempt(cpu, RTC_IRQ)++;
                kstat.irqs[cpu][RTC_IRQ]++;
        } else {
            handle_irq(RTC_IRQ, &regs);
        }
      }
#else
        handle_irq(RTC_IRQ, &regs);
#endif
        return;
    case 2:
        alpha_mv.machine_check(vector, la_ptr, &regs);
        return;
    case 3:
        alpha_mv.device_interrupt(vector, &regs);
        return;
    case 4:
        perf_irq(vector, &regs);
        return;
    default:
        printk(KERN_CRIT "Hardware intr %ld %lx? Huh?\n",
               type, vector);
    }
    printk("PC = %016lx PS=%04lx\n", regs.pc, regs.ps);
}

void __init
common_init_isa_dma(void)
{
    outb(0, DMA1_RESET_REG);
    outb(0, DMA2_RESET_REG);
    outb(0, DMA1_CLR_MASK_REG);
    outb(0, DMA2_CLR_MASK_REG);
}

void __init
init_IRQ(void)
{
    /* Uh, this really MUST come first, just in case
     * the platform init_irq() causes interrupts/mchecks
     * (as is the case with RAWHIDE, at least).
     */
    wrent(entInt, 0);

    alpha_mv.init_irq();
}

/*
 * machine error checks
 */
#define MCHK_K_TPERR           0x0080
#define MCHK_K_TCPERR          0x0082
#define MCHK_K_HERR            0x0084
#define MCHK_K_ECC_C           0x0086
#define MCHK_K_ECC_NC          0x0088
#define MCHK_K_OS_BUGCHECK     0x008A
#define MCHK_K_PAL_BUGCHECK    0x0090

#ifndef CONFIG_SMP
struct mcheck_info __mcheck_info;
#endif

void
process_mcheck_info(unsigned long vector, unsigned long la_ptr,
            struct pt_regs *regs, const char *machine,
            int expected)
{
    struct el_common *mchk_header;
    const char *reason;

    /*
     * See if the machine check is due to a badaddr() and if so,
     * ignore it.
     */

#if DEBUG_MCHECK > 0
     printk(KERN_CRIT "%s machine check %s\n", machine,
            expected ? "expected." : "NOT expected!!!");
#endif

    if (expected) {
        int cpu = smp_processor_id();
        mcheck_expected(cpu) = 0;
        mcheck_taken(cpu) = 1;
        return;
    }

    mchk_header = (struct el_common *)la_ptr;

    printk(KERN_CRIT "%s machine check: vector=0x%lx pc=0x%lx code=0x%lx\n",
           machine, vector, regs->pc, mchk_header->code);

    switch ((unsigned int) mchk_header->code) {
    /* Machine check reasons.  Defined according to PALcode sources.  */
    case 0x80: reason = "tag parity error"; break;
    case 0x82: reason = "tag control parity error"; break;
    case 0x84: reason = "generic hard error"; break;
    case 0x86: reason = "correctable ECC error"; break;
    case 0x88: reason = "uncorrectable ECC error"; break;
    case 0x8A: reason = "OS-specific PAL bugcheck"; break;
    case 0x90: reason = "callsys in kernel mode"; break;
    case 0x96: reason = "i-cache read retryable error"; break;
    case 0x98: reason = "processor detected hard error"; break;
    
    /* System specific (these are for Alcor, at least): */
    case 0x202: reason = "system detected hard error"; break;
    case 0x203: reason = "system detected uncorrectable ECC error"; break;
    case 0x204: reason = "SIO SERR occurred on PCI bus"; break;
    case 0x205: reason = "parity error detected by core logic"; break;
    case 0x206: reason = "SIO IOCHK occurred on ISA bus"; break;
    case 0x207: reason = "non-existent memory error"; break;
    case 0x208: reason = "MCHK_K_DCSR"; break;
    case 0x209: reason = "PCI SERR detected"; break;
    case 0x20b: reason = "PCI data parity error detected"; break;
    case 0x20d: reason = "PCI address parity error detected"; break;
    case 0x20f: reason = "PCI master abort error"; break;
    case 0x211: reason = "PCI target abort error"; break;
    case 0x213: reason = "scatter/gather PTE invalid error"; break;
    case 0x215: reason = "flash ROM write error"; break;
    case 0x217: reason = "IOA timeout detected"; break;
    case 0x219: reason = "IOCHK#, EISA add-in board parity or other catastrophic error"; break;
    case 0x21b: reason = "EISA fail-safe timer timeout"; break;
    case 0x21d: reason = "EISA bus time-out"; break;
    case 0x21f: reason = "EISA software generated NMI"; break;
    case 0x221: reason = "unexpected ev5 IRQ[3] interrupt"; break;
    default: reason = "unknown"; break;
    }

    printk(KERN_CRIT "machine check type: %s%s\n",
           reason, mchk_header->retry ? " (retryable)" : "");

    dik_show_regs(regs, NULL);

#if DEBUG_MCHECK > 1
    {
        /* Dump the logout area to give all info.  */
        unsigned long *ptr = (unsigned long *)la_ptr;
        long i;
        for (i = 0; i < mchk_header->size / sizeof(long); i += 2) {
            printk(KERN_CRIT "   +%8lx %016lx %016lx\n",
                   i*sizeof(long), ptr[i], ptr[i+1]);
        }
    }
#endif
}

/*
 * The special RTC interrupt type.  The interrupt itself was
 * processed by PALcode, and comes in via entInt vector 1.
 */

static void rtc_enable_disable(unsigned int irq) { }
static unsigned int rtc_startup(unsigned int irq) { return 0; }

struct irqaction timer_irqaction = {
    handler:    timer_interrupt,
    flags:        SA_INTERRUPT,
    name:        "timer",
};

static struct hw_interrupt_type rtc_irq_type = {
    typename:    "RTC",
    startup:    rtc_startup,
    shutdown:    rtc_enable_disable,
    enable:        rtc_enable_disable,
    disable:    rtc_enable_disable,
    ack:        rtc_enable_disable,
    end:        rtc_enable_disable,
};

void __init
init_rtc_irq(void)
{
    irq_desc[RTC_IRQ].status = IRQ_DISABLED;
    irq_desc[RTC_IRQ].handler = &rtc_irq_type;
    setup_irq(RTC_IRQ, &timer_irqaction);
}

/* Dummy irqactions.  */
struct irqaction isa_cascade_irqaction = {
    handler:    no_action,
    name:        "isa-cascade"
};

struct irqaction timer_cascade_irqaction = {
    handler:    no_action,
    name:        "timer-cascade"
};

struct irqaction halt_switch_irqaction = {
    handler:    no_action,
    name:        "halt-switch"
};

:: Command execute ::

Enter:
 
Select:
 

:: Search ::
  - regexp 

:: Upload ::
 
[ Read-Only ]

:: Make Dir ::
 
[ Read-Only ]
:: Make File ::
 
[ Read-Only ]

:: Go Dir ::
 
:: Go File ::
 

--[ c99shell v. 1.0 pre-release build #13 powered by Captain Crunch Security Team | http://ccteam.ru | Generation time: 0.014 ]--