Viewing file:  mca.h (3.81 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
/*
* Header for Microchannel Architecture Bus
* Written by Martin Kolinek, February 1996
*/
#ifndef _LINUX_MCA_H
#define _LINUX_MCA_H
/* The detection of MCA bus is done in the real mode (using BIOS).
* The information is exported to the protected code, where this
* variable is set to one in case MCA bus was detected.
*/
#ifndef MCA_bus__is_a_macro
extern int MCA_bus;
#endif
/* Maximal number of MCA slots - actually, some machines have less, but
* they all have sufficient number of POS registers to cover 8.
*/
#define MCA_MAX_SLOT_NR 8
/* MCA_NOTFOUND is an error condition. The other two indicate
* motherboard POS registers contain the adapter. They might be
* returned by the mca_find_adapter() function, and can be used as
* arguments to mca_read_stored_pos(). I'm not going to allow direct
* access to the motherboard registers until we run across an adapter
* that requires it. We don't know enough about them to know if it's
* safe.
*
* See Documentation/mca.txt or one of the existing drivers for
* more information.
*/
#define MCA_NOTFOUND (-1)
#define MCA_INTEGSCSI (MCA_MAX_SLOT_NR)
#define MCA_INTEGVIDEO (MCA_MAX_SLOT_NR+1)
#define MCA_MOTHERBOARD (MCA_MAX_SLOT_NR+2)
/* Max number of adapters, including both slots and various integrated
* things.
*/
#define MCA_NUMADAPTERS (MCA_MAX_SLOT_NR+3)
/* Returns the slot of the first enabled adapter matching id. User can
* specify a starting slot beyond zero, to deal with detecting multiple
* devices. Returns MCA_NOTFOUND if id not found. Also checks the
* integrated adapters.
*/
extern int mca_find_adapter(int id, int start);
extern int mca_find_unused_adapter(int id, int start);
/* adapter state info - returns 0 if no */
extern int mca_isadapter(int slot);
extern int mca_isenabled(int slot);
extern int mca_is_adapter_used(int slot);
extern int mca_mark_as_used(int slot);
extern void mca_mark_as_unused(int slot);
/* gets a byte out of POS register (stored in memory) */
extern unsigned char mca_read_stored_pos(int slot, int reg);
/* This can be expanded later. Right now, it gives us a way of
* getting meaningful information into the MCA_info structure,
* so we can have a more interesting /proc/mca.
*/
extern void mca_set_adapter_name(int slot, char* name);
extern char* mca_get_adapter_name(int slot);
/* This sets up an information callback for /proc/mca/slot?. The
* function is called with the buffer, slot, and device pointer (or
* some equally informative context information, or nothing, if you
* prefer), and is expected to put useful information into the
* buffer. The adapter name, id, and POS registers get printed
* before this is called though, so don't do it again.
*
* This should be called with a NULL procfn when a module
* unregisters, thus preventing kernel crashes and other such
* nastiness.
*/
typedef int (*MCA_ProcFn)(char* buf, int slot, void* dev);
extern void mca_set_adapter_procfn(int slot, MCA_ProcFn, void* dev);
/* These routines actually mess with the hardware POS registers. They
* temporarily disable the device (and interrupts), so make sure you know
* what you're doing if you use them. Furthermore, writing to a POS may
* result in two devices trying to share a resource, which in turn can
* result in multiple devices sharing memory spaces, IRQs, or even trashing
* hardware. YOU HAVE BEEN WARNED.
*
* You can only access slots with this. Motherboard registers are off
* limits.
*/
/* read a byte from the specified POS register. */
extern unsigned char mca_read_pos(int slot, int reg);
/* write a byte to the specified POS register. */
extern void mca_write_pos(int slot, int reg, unsigned char byte);
/* Should only be called by the NMI interrupt handler, this will do some
* fancy stuff to figure out what might have generated a NMI.
*/
extern void mca_handle_nmi(void);
#endif /* _LINUX_MCA_H */
|