Viewing file:  io_apic.h (3.05 KB) -rw-r--r--
Select action/file-type:
 (+) |  (+) |  (+) | Code (+) | Session (+) |  (+) | SDB (+) |  (+) |  (+) |  (+) |  (+) |  (+) |
#ifndef __ASM_IO_APIC_H
#define __ASM_IO_APIC_H
#include <linux/config.h>
#include <asm/types.h>
/*
* Intel IO-APIC support for SMP and UP systems.
*
* Copyright (C) 1997, 1998, 1999, 2000 Ingo Molnar
*/
#ifdef CONFIG_X86_IO_APIC
#define APIC_MISMATCH_DEBUG
#define IO_APIC_BASE(idx) \
((volatile int *)(__fix_to_virt(FIX_IO_APIC_BASE_0 + idx) \
+ (mp_ioapics[idx].mpc_apicaddr & ~PAGE_MASK)))
/*
* The structure of the IO-APIC:
*/
struct IO_APIC_reg_00 {
__u32 __reserved_2 : 24,
ID : 4,
__reserved_1 : 4;
} __attribute__ ((packed));
struct IO_APIC_reg_01 {
__u32 version : 8,
__reserved_2 : 7,
PRQ : 1,
entries : 8,
__reserved_1 : 8;
} __attribute__ ((packed));
struct IO_APIC_reg_02 {
__u32 __reserved_2 : 24,
arbitration : 4,
__reserved_1 : 4;
} __attribute__ ((packed));
/*
* # of IO-APICs and # of IRQ routing registers
*/
extern int nr_ioapics;
extern int nr_ioapic_registers[MAX_IO_APICS];
enum ioapic_irq_destination_types {
dest_Fixed = 0,
dest_LowestPrio = 1,
dest_SMI = 2,
dest__reserved_1 = 3,
dest_NMI = 4,
dest_INIT = 5,
dest__reserved_2 = 6,
dest_ExtINT = 7
};
struct IO_APIC_route_entry {
__u32 vector : 8,
delivery_mode : 3, /* 000: FIXED
* 001: lowest prio
* 111: ExtINT
*/
dest_mode : 1, /* 0: physical, 1: logical */
delivery_status : 1,
polarity : 1,
irr : 1,
trigger : 1, /* 0: edge, 1: level */
mask : 1, /* 0: enabled, 1: disabled */
__reserved_2 : 15;
union { struct { __u32
__reserved_1 : 24,
physical_dest : 4,
__reserved_2 : 4;
} physical;
struct { __u32
__reserved_1 : 24,
logical_dest : 8;
} logical;
} dest;
} __attribute__ ((packed));
/*
* MP-BIOS irq configuration table structures:
*/
/* I/O APIC entries */
extern struct mpc_config_ioapic mp_ioapics[MAX_IO_APICS];
/* # of MP IRQ source entries */
extern int mp_irq_entries;
/* MP IRQ source entries */
extern struct mpc_config_intsrc mp_irqs[MAX_IRQ_SOURCES];
/* non-0 if default (table-less) MP configuration */
extern int mpc_default_type;
static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg)
{
*IO_APIC_BASE(apic) = reg;
return *(IO_APIC_BASE(apic)+4);
}
static inline void io_apic_write(unsigned int apic, unsigned int reg, unsigned int value)
{
*IO_APIC_BASE(apic) = reg;
*(IO_APIC_BASE(apic)+4) = value;
}
/*
* Re-write a value: to be used for read-modify-write
* cycles where the read already set up the index register.
*/
static inline void io_apic_modify(unsigned int apic, unsigned int value)
{
*(IO_APIC_BASE(apic)+4) = value;
}
/*
* Synchronize the IO-APIC and the CPU by doing
* a dummy read from the IO-APIC
*/
static inline void io_apic_sync(unsigned int apic)
{
(void) *(IO_APIC_BASE(apic)+4);
}
/* 1 if "noapic" boot option passed */
extern int skip_ioapic_setup;
/*
* If we use the IO-APIC for IRQ routing, disable automatic
* assignment of PCI IRQ's.
*/
#define io_apic_assign_pci_irqs (mp_irq_entries && !skip_ioapic_setup)
#else /* !CONFIG_X86_IO_APIC */
#define io_apic_assign_pci_irqs 0
#endif
#endif
|